Annotation of sys/arch/i386/stand/pxeboot/srt0.S, Revision 1.1
1.1 ! nbrk 1: /* $OpenBSD: srt0.S,v 1.1 2004/03/19 13:48:19 tom Exp $ */
! 2:
! 3: /*
! 4: * Copyright (c) 1997 Michael Shalayeff
! 5: * All rights reserved.
! 6: *
! 7: * Redistribution and use in source and binary forms, with or without
! 8: * modification, are permitted provided that the following conditions
! 9: * are met:
! 10: * 1. Redistributions of source code must retain the above copyright
! 11: * notice, this list of conditions and the following disclaimer.
! 12: * 2. Redistributions in binary form must reproduce the above copyright
! 13: * notice, this list of conditions and the following disclaimer in the
! 14: * documentation and/or other materials provided with the distribution.
! 15: *
! 16: * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
! 17: * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
! 18: * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
! 19: * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
! 20: * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
! 21: * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
! 22: * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
! 23: * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
! 24: * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
! 25: * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
! 26: * SUCH DAMAGE.
! 27: *
! 28: */
! 29: #include <machine/asm.h>
! 30: #include <assym.h>
! 31:
! 32: #define BOOTSTACK 0xfffc
! 33:
! 34: .globl _C_LABEL(end)
! 35: .globl _C_LABEL(edata)
! 36: .globl _C_LABEL(boot)
! 37: .globl _C_LABEL(_rtt)
! 38: .globl _C_LABEL(bios_bootdev)
! 39: .globl _ASM_LABEL(pmm_init)
! 40: .globl Gdtr
! 41:
! 42: .text
! 43: .code16
! 44: .globl _start
! 45: _start:
! 46: #ifdef DEBUG
! 47: movl $0xb80a0, %ebx
! 48: addr32 movl $0x07420742, (%ebx)
! 49: #endif
! 50:
! 51: /* Clobbers %ax, maybe more */
! 52: #define putc(c) movb $c, %al; call Lchr
! 53:
! 54: /*
! 55: * We are loaded by the PXE loader at location 0x7C00. Like
! 56: * the standard /boot, we are linked to run at 0x40120 (load
! 57: * address 0x40000), so we relocate to there.
! 58: *
! 59: * From 0x7C00 to 0x40000 is 0x38400 (230400) bytes, so don't
! 60: * have to worry about an overlapping copy until pxeboot is
! 61: * over 225 KB.
! 62: *
! 63: * Note that there are other reasons to be worried if
! 64: * sizeof(/boot) > 64 KB. So currently we copy a maximum of 64 KB.
! 65: *
! 66: * PXE loads us with a stack that grows down from 0x80000 (512 KB).
! 67: * While it is unlikely that this will clash with our code that
! 68: * we're copying up, we create a temporary stack just below us
! 69: * before the relocate. We also set the entire %esp register, to
! 70: * be on the safe side.
! 71: */
! 72: #define PXEBOOTADDR 0x7c00 /* Address where we are loaded by PXE */
! 73: xorw %ax, %ax
! 74: movw %ax, %ss /* CPU disables interrupts till.. */
! 75: movl $PXEBOOTADDR-4, %esp /* after this instruction */
! 76:
! 77: movw $(PXEBOOTADDR >> 4), %ax
! 78: movw %ax, %ds
! 79: xorw %si, %si /* Where we're coming from */
! 80:
! 81: movw $(LINKADDR >> 4), %ax
! 82: movw %ax, %es /* Set %es = 0x4000 */
! 83: xorw %di, %di /* Where we're going to */
! 84:
! 85: movl $_C_LABEL(end), %ecx
! 86: subl $_C_LABEL(_start), %ecx /* How big are we? */
! 87:
! 88: cld
! 89: rep; movsb /* Copy into place */
! 90:
! 91: jmpl $(LINKADDR >> 4), $(relocated-_start) /* Now relocate */
! 92:
! 93: relocated:
! 94: /*
! 95: * In 16-bit mode, we have segment registers == 0x4012, and
! 96: * offsets work from here, with offset(_start) == 0.
! 97: *
! 98: * In 32-bit mode, we have a flat memory model, where
! 99: * offset(_start) == 0x40120. This is how we're linked.
! 100: *
! 101: * Now transition to protected mode.
! 102: *
! 103: * First, initialise the global descriptor table.
! 104: */
! 105: cli
! 106: push %cs
! 107: pop %ds
! 108: addr32 data32 lgdt (Gdtr - LINKADDR)
! 109:
! 110: movl %cr0, %eax
! 111: orl $CR0_PE, %eax
! 112: data32 movl %eax, %cr0
! 113: data32 ljmp $8, $1f /* Seg sel 0x08 is flat 32-bit code */
! 114: 1:
! 115: .code32
! 116: movl $0x10, %eax /* Seg sel 0x10 is flat 32-bit data */
! 117: mov %ax, %ds
! 118: mov %ax, %es
! 119: mov %ax, %fs
! 120: mov %ax, %gs
! 121: mov %ax, %ss
! 122: movl $BOOTSTACK, %esp
! 123: #ifdef DEBUG
! 124: movl $0xb8000, %ebx
! 125: movl $0x07420742, (%ebx)
! 126: #endif
! 127:
! 128: xorl %edx, %edx
! 129: movl %edx, _C_LABEL(bios_bootdev)
! 130: pushl %edx /* boot() takes this as a parameter */
! 131:
! 132: /* Set up an interrupt descriptor table for protected mode. */
! 133: call _ASM_LABEL(pmm_init)
! 134: #ifdef DEBUG
! 135: movl $0xb80a4, %ebx
! 136: movl $0x07520752, (%ebx)
! 137: #endif
! 138:
! 139: /* Zero .bss */
! 140: xorl %eax, %eax
! 141: movl $_C_LABEL(end), %ecx
! 142: subl $_C_LABEL(edata), %ecx
! 143: movl $_C_LABEL(edata), %edi
! 144: cld
! 145: rep; stosb
! 146:
! 147: /* Set our program name ("PXEBOOT", not "BOOT"). */
! 148: movl $pxe_progname, %eax
! 149: movl %eax, progname
! 150:
! 151: /*
! 152: * Now call "main()".
! 153: *
! 154: * We run in flat 32-bit protected mode, with no address mapping.
! 155: */
! 156: #ifdef DEBUG
! 157: movl $0xb8004, %ebx
! 158: movl $0x07410741, (%ebx)
! 159: #endif
! 160: call _C_LABEL(boot)
! 161:
! 162: /* boot() should not return. If it does, reset computer. */
! 163: jmp _C_LABEL(_rtt)
! 164:
! 165: ENTRY(debugchar)
! 166: pushl %ebx
! 167: movl 8(%esp), %ebx
! 168: addl %ebx, %ebx
! 169: addl $0xb8000, %ebx
! 170:
! 171: xorl %eax, %eax
! 172: movb 12(%esp), %al
! 173:
! 174: andl $0xfffffffe, %ebx
! 175: movb %al, (%ebx)
! 176: popl %ebx
! 177: ret
! 178:
! 179: .code16
! 180:
! 181: /*
! 182: * Write out value in %ax in hex
! 183: */
! 184: hex_word:
! 185: pushw %ax
! 186: mov %ah, %al
! 187: call hex_byte
! 188: popw %ax
! 189: /* fall thru */
! 190: /*
! 191: * Write out value in %al in hex
! 192: */
! 193: hex_byte:
! 194: pushw %ax
! 195: shrb $4, %al
! 196: call hex_nibble
! 197: popw %ax
! 198: /* fall thru */
! 199:
! 200: /* Write out nibble in %al */
! 201: hex_nibble:
! 202: and $0x0F, %al
! 203: add $'0', %al
! 204: cmpb $'9', %al
! 205: jbe Lchr
! 206: addb $'A'-'9'-1, %al
! 207: /* fall thru to Lchr */
! 208: /*
! 209: * Lchr: write the character in %al to console
! 210: */
! 211: Lchr:
! 212: pushw %bx
! 213: movb $0x0e, %ah
! 214: xorw %bx, %bx
! 215: incw %bx /* movw $0x01, %bx */
! 216: int $0x10
! 217: popw %bx
! 218: ret
! 219:
! 220: pxe_progname:
! 221: .asciz "PXEBOOT"
! 222:
! 223: .end
CVSweb