Annotation of sys/arch/mvme68k/dev/i82586.h, Revision 1.1
1.1 ! nbrk 1: /* $OpenBSD: i82586.h,v 1.4 2003/06/02 05:09:14 deraadt Exp $ */
! 2:
! 3: /*-
! 4: * Copyright (c) 1995 Theo de Raadt
! 5: * Copyright (c) 1992, University of Vermont and State Agricultural College.
! 6: * Copyright (c) 1992, Garrett A. Wollman.
! 7: * All rights reserved.
! 8: *
! 9: * Redistribution and use in source and binary forms, with or without
! 10: * modification, are permitted provided that the following conditions
! 11: * are met:
! 12: * 1. Redistributions of source code must retain the above copyright
! 13: * notice, this list of conditions and the following disclaimer.
! 14: * 2. Redistributions in binary form must reproduce the above copyright
! 15: * notice, this list of conditions and the following disclaimer in the
! 16: * documentation and/or other materials provided with the distribution.
! 17: * 3. All advertising materials mentioning features or use of this software
! 18: * must display the following acknowledgement:
! 19: * This product includes software developed by the University of
! 20: * Vermont and State Agricultural College and Garrett A. Wollman.
! 21: * 4. Neither the name of the University nor the name of the author
! 22: * may be used to endorse or promote products derived from this software
! 23: * without specific prior written permission.
! 24: *
! 25: * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
! 26: * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
! 27: * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
! 28: * ARE DISCLAIMED. IN NO EVENT SHALL THE UNIVERSITY OR AUTHOR BE LIABLE
! 29: * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
! 30: * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
! 31: * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
! 32: * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
! 33: * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
! 34: * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
! 35: * SUCH DAMAGE.
! 36: */
! 37:
! 38: /*
! 39: * Intel 82586 Ethernet chip
! 40: * Register, bit, and structure definitions.
! 41: *
! 42: * Written by GAW with reference to the Clarkson Packet Driver code for this
! 43: * chip written by Russ Nelson and others.
! 44: *
! 45: * Sun support added by Charles D. Cranor, 25-Oct-94
! 46: */
! 47:
! 48: struct ie_en_addr {
! 49: u_char data[6];
! 50: };
! 51:
! 52: /*
! 53: * This is the master configuration block. It tells the hardware where all
! 54: * the rest of the stuff is.
! 55: */
! 56: struct ie_sys_conf_ptr {
! 57: u_char mbz1[3]; /* must be zero */
! 58: u_char ie_bus_use; /* true if 8-bit only */
! 59: u_char mbz2[4]; /* must be zero */
! 60: caddr_t ie_iscp_ptr; /* 24-bit physaddr of ISCP */
! 61: };
! 62:
! 63: /*
! 64: * The tells the hardware where all the rest of the stuff is, too.
! 65: * FIXME: some of these should be re-commented after we figure out their
! 66: * REAL function.
! 67: */
! 68: struct ie_int_sys_conf_ptr {
! 69: u_char mbz1[1];
! 70: u_char ie_busy; /* zeroed after init */
! 71: u_short ie_scb_offset; /* 16-bit physaddr of next struct */
! 72: caddr_t ie_base; /* 24-bit physaddr for all 16-bit vars */
! 73: };
! 74:
! 75: /*
! 76: * This FINALLY tells the hardware what to do and where to put it.
! 77: */
! 78: struct ie_sys_ctl_block {
! 79: u_short ie_status; /* status word */
! 80: u_short ie_command; /* command word */
! 81: u_short ie_command_list; /* 16-pointer to command block list */
! 82: u_short ie_recv_list; /* 16-pointer to receive frame list */
! 83: u_short ie_err_crc; /* CRC errors */
! 84: u_short ie_err_align; /* Alignment errors */
! 85: u_short ie_err_resource; /* Resource errors */
! 86: u_short ie_err_overrun; /* Overrun errors */
! 87: };
! 88:
! 89: /* Command values */
! 90: #define IE_RU_COMMAND SWAP(0x0070) /* mask for RU command */
! 91: #define IE_RU_NOP SWAP(0) /* for completeness */
! 92: #define IE_RU_START SWAP(0x0010) /* start receive unit command */
! 93: #define IE_RU_ENABLE SWAP(0x0020) /* enable receiver command */
! 94: #define IE_RU_DISABLE SWAP(0x0030) /* disable receiver command */
! 95: #define IE_RU_ABORT SWAP(0x0040) /* abort current receive operation */
! 96:
! 97: #define IE_CU_COMMAND SWAP(0x0700) /* mask for CU command */
! 98: #define IE_CU_NOP SWAP(0) /* included for completeness */
! 99: #define IE_CU_START SWAP(0x0100) /* do-command command */
! 100: #define IE_CU_RESUME SWAP(0x0200) /* resume a suspended cmd list */
! 101: #define IE_CU_STOP SWAP(0x0300) /* SUSPEND was already taken */
! 102: #define IE_CU_ABORT SWAP(0x0400) /* abort current command */
! 103:
! 104: #define IE_ACK_COMMAND SWAP(0xf000) /* mask for ACK command */
! 105: #define IE_ACK_CX SWAP(0x8000) /* ack IE_ST_DONE */
! 106: #define IE_ACK_FR SWAP(0x4000) /* ack IE_ST_RECV */
! 107: #define IE_ACK_CNA SWAP(0x2000) /* ack IE_ST_ALLDONE */
! 108: #define IE_ACK_RNR SWAP(0x1000) /* ack IE_ST_RNR */
! 109:
! 110: #define IE_ACTION_COMMAND(x) (((x) & IE_CU_COMMAND) == IE_CU_START)
! 111: /* is this command an action command? */
! 112:
! 113: /* Status values */
! 114: #define IE_ST_WHENCE SWAP(0xf000) /* mask for cause of interrupt */
! 115: #define IE_ST_DONE SWAP(0x8000) /* command with I bit completed */
! 116: #define IE_ST_RECV SWAP(0x4000) /* frame received */
! 117: #define IE_ST_ALLDONE SWAP(0x2000) /* all commands completed */
! 118: #define IE_ST_RNR SWAP(0x1000) /* receive not ready */
! 119:
! 120: #define IE_CU_STATUS SWAP(0x700) /* mask for command unit status */
! 121: #define IE_CU_ACTIVE SWAP(0x200) /* command unit is active */
! 122: #define IE_CU_SUSPEND SWAP(0x100) /* command unit is suspended */
! 123:
! 124: #define IE_RU_STATUS SWAP(0x70) /* mask for receiver unit status */
! 125: #define IE_RU_SUSPEND SWAP(0x10) /* receiver is suspended */
! 126: #define IE_RU_NOSPACE SWAP(0x20) /* receiver has no resources */
! 127: #define IE_RU_READY SWAP(0x40) /* reveiver is ready */
! 128:
! 129: /*
! 130: * This is filled in partially by the chip, partially by us.
! 131: */
! 132: struct ie_recv_frame_desc {
! 133: u_short ie_fd_status; /* status for this frame */
! 134: u_short ie_fd_last; /* end of frame list flag */
! 135: u_short ie_fd_next; /* 16-pointer to next RFD */
! 136: u_short ie_fd_buf_desc; /* 16-pointer to list of buffer desc's */
! 137: struct ie_en_addr dest; /* destination ether */
! 138: struct ie_en_addr src; /* source ether */
! 139: u_short ie_length; /* 802 length/Ether type */
! 140: u_short mbz; /* must be zero */
! 141: };
! 142:
! 143: #define IE_FD_LAST SWAP(0x8000) /* last rfd in list */
! 144: #define IE_FD_SUSP SWAP(0x4000) /* suspend RU after receipt */
! 145:
! 146: #define IE_FD_COMPLETE SWAP(0x8000) /* frame is complete */
! 147: #define IE_FD_BUSY SWAP(0x4000) /* frame is busy */
! 148: #define IE_FD_OK SWAP(0x2000) /* frame is bad */
! 149: #define IE_FD_RNR SWAP(0x0200) /* receiver out of resources here */
! 150:
! 151: /*
! 152: * linked list of buffers...
! 153: */
! 154: struct ie_recv_buf_desc {
! 155: u_short ie_rbd_actual; /* status for this buffer */
! 156: u_short ie_rbd_next; /* 16-pointer to next RBD */
! 157: caddr_t ie_rbd_buffer; /* 24-pointer to buffer for this RBD */
! 158: u_short ie_rbd_length; /* length of the buffer */
! 159: u_short mbz; /* must be zero */
! 160: };
! 161:
! 162: #define IE_RBD_LAST SWAP(0x8000) /* last buffer */
! 163: #define IE_RBD_USED SWAP(0x4000) /* this buffer has data */
! 164: /*
! 165: * All commands share this in common.
! 166: */
! 167: struct ie_cmd_common {
! 168: u_short ie_cmd_status; /* status of this command */
! 169: u_short ie_cmd_cmd; /* command word */
! 170: u_short ie_cmd_link; /* link to next command */
! 171: };
! 172:
! 173: #define IE_STAT_COMPL SWAP(0x8000) /* command is completed */
! 174: #define IE_STAT_BUSY SWAP(0x4000) /* command is running now */
! 175: #define IE_STAT_OK SWAP(0x2000) /* command completed successfully */
! 176: #define IE_STAT_ABORT SWAP(0x1000) /* command was aborted */
! 177:
! 178:
! 179: #define IE_CMD_NOP SWAP(0x0000) /* NOP */
! 180: #define IE_CMD_IASETUP SWAP(0x0001) /* initial address setup */
! 181: #define IE_CMD_CONFIG SWAP(0x0002) /* configure command */
! 182: #define IE_CMD_MCAST SWAP(0x0003) /* multicast setup command */
! 183: #define IE_CMD_XMIT SWAP(0x0004) /* transmit command */
! 184: #define IE_CMD_TDR SWAP(0x0005) /* time-domain reflectometer command */
! 185: #define IE_CMD_DUMP SWAP(0x0006) /* dump command */
! 186: #define IE_CMD_DIAGNOSE SWAP(0x0007) /* diagnostics command */
! 187:
! 188: #define IE_CMD_LAST SWAP(0x8000) /* this is the last command in the list */
! 189: #define IE_CMD_SUSPEND SWAP(0x4000) /* suspend CU after this command */
! 190: #define IE_CMD_INTR SWAP(0x2000) /* post an interrupt after completion */
! 191:
! 192: /*
! 193: * This is the command to transmit a frame.
! 194: */
! 195: struct ie_xmit_cmd {
! 196: struct ie_cmd_common com; /* common part */
! 197: #define ie_xmit_status com.ie_cmd_status
! 198:
! 199: u_short ie_xmit_desc; /* 16-pointer to buffer descriptor */
! 200: struct ie_en_addr ie_xmit_addr; /* destination address */
! 201:
! 202: u_short ie_xmit_length; /* 802.3 length/Ether type field */
! 203: };
! 204:
! 205: #define IE_XS_MAXCOLL SWAP(0x000f) /* number of collisions during transmit */
! 206: #define IE_XS_EXCMAX SWAP(0x0020) /* exceeded maximum number of collisions */
! 207: #define IE_XS_SQE SWAP(0x0040) /* SQE positive */
! 208: #define IE_XS_DEFERRED SWAP(0x0080) /* transmission deferred */
! 209: #define IE_XS_UNDERRUN SWAP(0x0100) /* DMA underrun */
! 210: #define IE_XS_LOSTCTS SWAP(0x0200) /* Lost CTS */
! 211: #define IE_XS_NOCARRIER SWAP(0x0400) /* No Carrier */
! 212:
! 213: /*
! 214: * This is a buffer descriptor for a frame to be transmitted.
! 215: */
! 216:
! 217: struct ie_xmit_buf {
! 218: u_short ie_xmit_flags; /* see below */
! 219: u_short ie_xmit_next; /* 16-pointer to next desc. */
! 220: caddr_t ie_xmit_buf; /* 24-pointer to the actual buffer */
! 221: };
! 222:
! 223: #define IE_XMIT_LAST SWAP(0x8000) /* this TBD is the last one */
! 224: /* The rest of the `flags' word is actually the length. */
! 225:
! 226: /*
! 227: * Multicast setup command.
! 228: */
! 229:
! 230: #define MAXMCAST 250 /* must fit in transmit buffer */
! 231:
! 232: struct ie_mcast_cmd {
! 233: struct ie_cmd_common com; /* common part */
! 234: #define ie_mcast_status com.ie_cmd_status
! 235:
! 236: u_short ie_mcast_bytes; /* size (in bytes) of multicast addresses */
! 237: struct ie_en_addr ie_mcast_addrs[MAXMCAST + 1]; /* space for them */
! 238: };
! 239:
! 240: /*
! 241: * Time Domain Reflectometer command.
! 242: */
! 243:
! 244: struct ie_tdr_cmd {
! 245: struct ie_cmd_common com; /* common part */
! 246: #define ie_tdr_status com.ie_cmd_status
! 247:
! 248: u_short ie_tdr_time; /* error bits and time */
! 249: };
! 250:
! 251: #define IE_TDR_SUCCESS SWAP(0x8000) /* TDR succeeded without error */
! 252: #define IE_TDR_XCVR SWAP(0x4000) /* detected a transceiver problem */
! 253: #define IE_TDR_OPEN SWAP(0x2000) /* detected an open */
! 254: #define IE_TDR_SHORT SWAP(0x1000) /* TDR detected a short */
! 255: #define IE_TDR_TIME SWAP(0x07ff) /* mask for reflection time */
! 256:
! 257: /*
! 258: * Initial Address Setup command
! 259: */
! 260: struct ie_iasetup_cmd {
! 261: struct ie_cmd_common com;
! 262: #define ie_iasetup_status com.ie_cmd_status
! 263:
! 264: struct ie_en_addr ie_address;
! 265: };
! 266:
! 267: /*
! 268: * Configuration command
! 269: */
! 270: struct ie_config_cmd {
! 271: struct ie_cmd_common com; /* common part */
! 272: #define ie_config_status com.ie_cmd_status
! 273:
! 274: u_char ie_config_count; /* byte count (0x0c) */
! 275: u_char ie_fifo; /* fifo (8) */
! 276: u_char ie_save_bad; /* save bad frames (0x40) */
! 277: u_char ie_addr_len; /* address length (0x2e) (AL-LOC == 1) */
! 278: u_char ie_priority; /* priority and backoff (0x0) */
! 279: u_char ie_ifs; /* inter-frame spacing (0x60) */
! 280: u_char ie_slot_low; /* slot time, LSB (0x0) */
! 281: u_char ie_slot_high; /* slot time, MSN, and retries (0xf2) */
! 282: u_char ie_promisc; /* 1 if promiscuous, else 0 */
! 283: u_char ie_crs_cdt; /* CSMA/CD parameters (0x0) */
! 284: u_char ie_min_len; /* min frame length (0x40) */
! 285: u_char ie_junk; /* stuff for 82596 (0xff) */
! 286: };
CVSweb