File: [local] / sys / arch / mvme68k / stand / libsa / SRT0.S (download)
Revision 1.1.1.1 (vendor branch), Tue Mar 4 16:07:38 2008 UTC (16 years, 6 months ago) by nbrk
Branch: OPENBSD_4_2_BASE, MAIN
CVS Tags: jornada-partial-support-wip, HEAD Changes since 1.1: +0 -0 lines
Import of OpenBSD 4.2 release kernel tree with initial code to support
Jornada 720/728, StrongARM 1110-based handheld PC.
At this point kernel roots on NFS and boots into vfs_mountroot() and traps.
What is supported:
- glass console, Jornada framebuffer (jfb) works in 16bpp direct color mode
(needs some palette tweaks for non black/white/blue colors, i think)
- saic, SA11x0 interrupt controller (needs cleanup)
- sacom, SA11x0 UART (supported only as boot console for now)
- SA11x0 GPIO controller fully supported (but can't handle multiple interrupt
handlers on one gpio pin)
- sassp, SSP port on SA11x0 that attaches spibus
- Jornada microcontroller (jmcu) to control kbd, battery, etc throught
the SPI bus (wskbd attaches on jmcu, but not tested)
- tod functions seem work
- initial code for SA-1111 (chip companion) : this is TODO
Next important steps, i think:
- gpio and intc on sa1111
- pcmcia support for sa11x0 (and sa1111 help logic)
- REAL root on nfs when we have PCMCIA support (we may use any of supported pccard NICs)
- root on wd0! (using already supported PCMCIA-ATA)
|
| $OpenBSD: SRT0.S,v 1.7 2001/07/04 08:06:56 niklas Exp $
| $NetBSD: SRT0.S,v 1.2 1995/08/12 18:38:55 gwr Exp $
| Copyright (c) 1995 Gordon W. Ross
| All rights reserved.
|
| Redistribution and use in source and binary forms, with or without
| modification, are permitted provided that the following conditions
| are met:
| 1. Redistributions of source code must retain the above copyright
| notice, this list of conditions and the following disclaimer.
| 2. Redistributions in binary form must reproduce the above copyright
| notice, this list of conditions and the following disclaimer in the
| documentation and/or other materials provided with the distribution.
| 3. The name of the author may not be used to endorse or promote products
| derived from this software without specific prior written permission.
| 4. All advertising materials mentioning features or use of this software
| must display the following acknowledgement:
| This product includes software developed by Gordon Ross
|
| THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
| IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
| OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
| IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
| INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
| NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
| DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
| THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
| (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
| THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
| this is a pre-startup wrapper for bugcrt which relocates the
| code to the correct place before exec()ing.
| SRT0.S - Stand-alone Run-Time startup code, part 0
.file "SRT0.S"
.text
.globl __estack
__estack:
.globl xstart
xstart:
| first, relocate code to correct place without touching critical regs
| (args are in: d0, d1, d4, a0, a1, a2, a3, a4, a5, a6)
| [a3 and a4 only when netbooting]
movl a3, d3 | SAVE a3 in d3
movl a4, d5 | SAVE a4 in d5
lea pc@(xstart:w), a3 | a3 = current addr (could be anywhere)
lea xstart:l, a4 | a4 = desired location (LINKADDR)
cmpl a3, a4 | already there?
beqs restart | short-circuit out
| Relocate the code and data
movl #_edata,d2 | Desired end of program
subl a4,d2 | Calculate length, round up.
lsrl #2,d2
Lcp:
movl a3@+, a4@+
dbra d2, Lcp
| Force a long jump to the relocated code (not pc-relative)
lea restart:l, a3
jmp a3@
restart:
| now in the relocated code
| Set up stack (just before relocated text)
lea __estack:l, a3
movl a3, sp
| now that we have relocated, call the bugcrt (note we skip over the special
| bug header which has a PC and SP in it)
movl d3, a3 | RESTORE a3
movl d5, a4 | RESTORE a4
jmp _start
| The end.