File: [local] / sys / arch / sparc / dev / magmareg.h (download)
Revision 1.1.1.1 (vendor branch), Tue Mar 4 16:08:05 2008 UTC (16 years, 4 months ago) by nbrk
Branch: OPENBSD_4_2_BASE, MAIN
CVS Tags: jornada-partial-support-wip, HEAD Changes since 1.1: +0 -0 lines
Import of OpenBSD 4.2 release kernel tree with initial code to support
Jornada 720/728, StrongARM 1110-based handheld PC.
At this point kernel roots on NFS and boots into vfs_mountroot() and traps.
What is supported:
- glass console, Jornada framebuffer (jfb) works in 16bpp direct color mode
(needs some palette tweaks for non black/white/blue colors, i think)
- saic, SA11x0 interrupt controller (needs cleanup)
- sacom, SA11x0 UART (supported only as boot console for now)
- SA11x0 GPIO controller fully supported (but can't handle multiple interrupt
handlers on one gpio pin)
- sassp, SSP port on SA11x0 that attaches spibus
- Jornada microcontroller (jmcu) to control kbd, battery, etc throught
the SPI bus (wskbd attaches on jmcu, but not tested)
- tod functions seem work
- initial code for SA-1111 (chip companion) : this is TODO
Next important steps, i think:
- gpio and intc on sa1111
- pcmcia support for sa11x0 (and sa1111 help logic)
- REAL root on nfs when we have PCMCIA support (we may use any of supported pccard NICs)
- root on wd0! (using already supported PCMCIA-ATA)
|
/* $OpenBSD: magmareg.h,v 1.9 2004/11/02 21:16:10 miod Exp $ */
/* magmareg.h
*
* Copyright (c) 1998 Iain Hibbert
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Iain Hibbert
* 4. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*/
/* The mapping of minor device number -> card and port is done as
* follows by default:
*
* +---+---+---+---+---+---+---+---+
* | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
* +---+---+---+---+---+---+---+---+
* | | | | | | | |
* | | | | +---+---+---+---> port number
* | | | |
* | | | +-------------------> dialout (on tty ports)
* | | |
* | | +-----------------------> unused
* | |
* +---+---------------------------> card number
*
*/
#define MAGMA_MAX_CARDS 4
#define MAGMA_MAX_TTY 16
#define MAGMA_MAX_BPP 2
#define MAGMA_MAX_CD1400 4
#define MAGMA_MAX_CD1190 2
#define MAGMA_CARD(x) ((minor(x) >> 6) & 0x03)
#define MAGMA_PORT(x) (minor(x) & 0x0f)
#define MTTY_DIALOUT(x) (minor(x) & 0x10)
/*
* Supported Card Types
*/
struct magma_board_info {
const char *mb_sbusname; /* sbus name */
const char *mb_name; /* cardname to match against */
const char *mb_realname; /* english card name */
int mb_nser; /* number of serial ports */
int mb_npar; /* number of parallel ports */
int mb_ncd1400; /* number of CD1400 chips */
int mb_svcackr; /* svcackr offset */
int mb_svcackt; /* svcackt offset */
int mb_svcackm; /* svcackm offset */
int mb_cd1400[MAGMA_MAX_CD1400];/* cd1400 chip register offsets */
int mb_ncd1190; /* number of CD1190 chips */
int mb_cd1190[MAGMA_MAX_CD1190];/* cd1190 chip register offsets */
};
/*
* cd1400 chip data
*/
struct cd1400 {
__volatile u_char *cd_reg; /* chip registers */
int cd_chiprev; /* chip revision */
int cd_clock; /* clock speed in MHz */
int cd_parmode; /* parallel mode operation */
};
/*
* cd1190 chip data
*/
struct cd1190 {
__volatile u_char *cd_reg; /* chip registers */
int cd_chiprev; /* chip revision */
};
/* software state for each card */
struct magma_softc {
struct device ms_dev; /* required. must be first in softc */
/* cd1400 chip info */
int ms_ncd1400;
struct cd1400 ms_cd1400[MAGMA_MAX_CD1400];
__volatile u_char *ms_svcackr; /* CD1400 service acknowledge receive */
__volatile u_char *ms_svcackt; /* CD1400 service acknowledge transmit */
__volatile u_char *ms_svcackm; /* CD1400 service acknowledge modem */
/* cd1190 chip info */
int ms_ncd1190;
struct cd1190 ms_cd1190[MAGMA_MAX_CD1190];
const struct magma_board_info *ms_board; /* what am I? */
struct mtty_softc *ms_mtty;
struct mbpp_softc *ms_mbpp;
struct intrhand ms_hardint; /* hard interrupt handler */
struct intrhand ms_softint; /* soft interrupt handler */
};
#define MTTY_RBUF_SIZE (2 * 512)
#define MTTY_RX_FIFO_THRESHOLD 6
#define MTTY_RX_DTR_THRESHOLD 9
struct mtty_port {
struct cd1400 *mp_cd1400; /* ptr to chip */
int mp_channel; /* and channel */
struct tty *mp_tty;
int mp_openflags; /* default tty flags */
int mp_flags; /* port flags */
int mp_carrier; /* state of carrier */
u_char *mp_rbuf; /* ring buffer start */
u_char *mp_rend; /* ring buffer end */
u_char *mp_rget; /* ring buffer read pointer */
u_char *mp_rput; /* ring buffer write pointer */
u_char *mp_txp; /* transmit character pointer */
int mp_txc; /* transmit character counter */
};
#define MTTYF_CARRIER_CHANGED (1<<0)
#define MTTYF_SET_BREAK (1<<1)
#define MTTYF_CLR_BREAK (1<<2)
#define MTTYF_DONE (1<<3)
#define MTTYF_STOP (1<<4)
#define MTTYF_RING_OVERFLOW (1<<5)
struct mtty_softc {
struct device ms_dev; /* device info */
int ms_nports; /* tty ports */
struct mtty_port ms_port[MAGMA_MAX_TTY];
};
#define MBPP_RX_FIFO_THRESHOLD 25
struct mbpp_port {
struct cd1400 *mp_cd1400; /* for LC2+1Sp card */
struct cd1190 *mp_cd1190; /* all the others */
int mp_flags;
struct bpp_param mp_param;
#define mp_burst mp_param.bp_burst
#define mp_timeout mp_param.bp_timeout
#define mp_delay mp_param.bp_delay
u_char *mp_ptr; /* pointer to io data */
int mp_cnt; /* count of io chars */
struct timeout mp_timeout_tmo; /* for mbpp_timeout() */
struct timeout mp_start_tmo; /* for mbpp_start() */
};
#define MBPPF_OPEN (1<<0)
#define MBPPF_TIMEOUT (1<<1)
#define MBPPF_UIO (1<<2)
#define MBPPF_DELAY (1<<3)
#define MBPPF_WAKEUP (1<<4)
struct mbpp_softc {
struct device ms_dev; /* device info */
int ms_nports; /* parallel ports */
struct mbpp_port ms_port[MAGMA_MAX_BPP];
};
/* internal function prototypes */
int cd1400_compute_baud(speed_t, int, int *, int *);
__inline void cd1400_write_ccr(struct cd1400 *, u_char);
__inline u_char cd1400_read_reg(struct cd1400 *, int);
__inline void cd1400_write_reg(struct cd1400 *, int, u_char);
void cd1400_enable_transmitter(struct cd1400 *, int);
int magma_match(struct device *, void *, void *);
void magma_attach(struct device *, struct device *, void *);
int magma_hard(void *);
int magma_soft(void *);
int mtty_match(struct device *, void *, void *);
void mtty_attach(struct device *, struct device *, void *);
int mtty_modem_control(struct mtty_port *, int, int);
int mtty_param(struct tty *, struct termios *);
void mtty_start(struct tty *);
int mbpp_match(struct device *, void *, void *);
void mbpp_attach(struct device *, struct device *, void *);
int mbpp_rw(dev_t, struct uio *);
void mbpp_timeout(void *);
void mbpp_start(void *);
int mbpp_send(struct mbpp_port *, caddr_t, int);
int mbpp_recv(struct mbpp_port *, caddr_t, int);
int mbpp_hztoms(int);
int mbpp_mstohz(int);