File: [local] / sys / compat / hpux / m68k / hpux_exec.c (download)
Revision 1.1.1.1 (vendor branch), Tue Mar 4 16:09:09 2008 UTC (16 years, 6 months ago) by nbrk
Branch: OPENBSD_4_2_BASE, MAIN
CVS Tags: jornada-partial-support-wip, HEAD Changes since 1.1: +0 -0 lines
Import of OpenBSD 4.2 release kernel tree with initial code to support
Jornada 720/728, StrongARM 1110-based handheld PC.
At this point kernel roots on NFS and boots into vfs_mountroot() and traps.
What is supported:
- glass console, Jornada framebuffer (jfb) works in 16bpp direct color mode
(needs some palette tweaks for non black/white/blue colors, i think)
- saic, SA11x0 interrupt controller (needs cleanup)
- sacom, SA11x0 UART (supported only as boot console for now)
- SA11x0 GPIO controller fully supported (but can't handle multiple interrupt
handlers on one gpio pin)
- sassp, SSP port on SA11x0 that attaches spibus
- Jornada microcontroller (jmcu) to control kbd, battery, etc throught
the SPI bus (wskbd attaches on jmcu, but not tested)
- tod functions seem work
- initial code for SA-1111 (chip companion) : this is TODO
Next important steps, i think:
- gpio and intc on sa1111
- pcmcia support for sa11x0 (and sa1111 help logic)
- REAL root on nfs when we have PCMCIA support (we may use any of supported pccard NICs)
- root on wd0! (using already supported PCMCIA-ATA)
|
/* $OpenBSD: hpux_exec.c,v 1.2 2005/12/30 19:46:55 miod Exp $ */
/* $NetBSD: hpux_exec.c,v 1.8 1997/03/16 10:14:44 thorpej Exp $ */
/*
* Copyright (c) 1995, 1997 Jason R. Thorpe. All rights reserved.
* Copyright (c) 1993, 1994 Christopher G. Demetriou
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* This product includes software developed by Christopher G. Demetriou.
* 4. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/*
* Glue for exec'ing HP-UX executables and the HP-UX execv() system call.
* Based on sys/kern/exec_aout.c
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/proc.h>
#include <sys/malloc.h>
#include <sys/mount.h>
#include <sys/namei.h>
#include <sys/user.h>
#include <sys/vnode.h>
#include <sys/mman.h>
#include <sys/stat.h>
#include <uvm/uvm_extern.h>
#include <machine/cpu.h>
#include <machine/reg.h>
#include <sys/syscallargs.h>
#include <compat/hpux/hpux.h>
#include <compat/hpux/hpux_util.h>
#include <compat/hpux/m68k/hpux_syscall.h>
#include <compat/hpux/m68k/hpux_syscallargs.h>
#include <machine/hpux_machdep.h>
const char hpux_emul_path[] = "/emul/hpux";
extern char sigcode[], esigcode[];
extern struct sysent hpux_sysent[];
#ifdef SYSCALL_DEBUG
extern char *hpux_syscallnames[];
#endif
extern int bsdtohpuxerrnomap[];
static int exec_hpux_prep_nmagic(struct proc *, struct exec_package *);
static int exec_hpux_prep_zmagic(struct proc *, struct exec_package *);
static int exec_hpux_prep_omagic(struct proc *, struct exec_package *);
struct emul emul_hpux = {
"hpux",
bsdtohpuxerrnomap,
hpux_sendsig,
HPUX_SYS_syscall,
HPUX_SYS_MAXSYSCALL,
hpux_sysent,
#ifdef SYSCALL_DEBUG
hpux_syscallnames,
#else
NULL,
#endif
0,
copyargs,
hpux_setregs,
NULL,
sigcode,
esigcode,
};
int
exec_hpux_makecmds(p, epp)
struct proc *p;
struct exec_package *epp;
{
struct hpux_exec *hpux_ep = epp->ep_hdr;
short sysid, magic;
int error = ENOEXEC;
if (epp->ep_hdrvalid < sizeof(struct hpux_exec))
return (ENOEXEC);
magic = HPUX_MAGIC(hpux_ep);
sysid = HPUX_SYSID(hpux_ep);
if (sysid != MID_HPUX)
return (ENOEXEC);
/*
* HP-UX is a 4k page size system, and executables assume
* this.
*/
if (PAGE_SIZE != HPUX_LDPGSZ)
return (ENOEXEC);
switch (magic) {
case OMAGIC:
error = exec_hpux_prep_omagic(p, epp);
break;
case NMAGIC:
error = exec_hpux_prep_nmagic(p, epp);
break;
case ZMAGIC:
error = exec_hpux_prep_zmagic(p, epp);
break;
}
if (error == 0) {
/* set up our emulation information */
epp->ep_emul = &emul_hpux;
} else
kill_vmcmds(&epp->ep_vmcmds);
return (error);
}
static int
exec_hpux_prep_nmagic(p, epp)
struct proc *p;
struct exec_package *epp;
{
struct hpux_exec *execp = epp->ep_hdr;
long bsize, baddr;
epp->ep_taddr = 0;
epp->ep_tsize = execp->ha_text;
epp->ep_daddr = epp->ep_taddr + roundup(execp->ha_text, HPUX_LDPGSZ);
epp->ep_dsize = execp->ha_data + execp->ha_bss;
epp->ep_entry = execp->ha_entry;
/* set up command for text segment */
NEW_VMCMD(&epp->ep_vmcmds, vmcmd_map_readvn, execp->ha_text,
epp->ep_taddr, epp->ep_vp, HPUX_TXTOFF(*execp, NMAGIC),
VM_PROT_READ|VM_PROT_EXECUTE);
/* set up command for data segment */
NEW_VMCMD(&epp->ep_vmcmds, vmcmd_map_readvn, execp->ha_data,
epp->ep_daddr, epp->ep_vp, HPUX_DATAOFF(*execp, NMAGIC),
VM_PROT_READ|VM_PROT_WRITE|VM_PROT_EXECUTE);
/* set up command for bss segment */
baddr = round_page(epp->ep_daddr + execp->ha_data);
bsize = epp->ep_daddr + epp->ep_dsize - baddr;
if (bsize > 0)
NEW_VMCMD(&epp->ep_vmcmds, vmcmd_map_zero, bsize, baddr,
NULLVP, 0, VM_PROT_READ|VM_PROT_WRITE|VM_PROT_EXECUTE);
return (exec_setup_stack(p, epp));
}
static int
exec_hpux_prep_zmagic(p, epp)
struct proc *p;
struct exec_package *epp;
{
struct hpux_exec *execp = epp->ep_hdr;
long bsize, baddr;
long nontext;
/*
* Check if vnode is in open for writing, because we want to
* demand-page out of it. If it is, don't do it, for various
* reasons.
*/
if ((execp->ha_text != 0 || execp->ha_data != 0) &&
epp->ep_vp->v_writecount != 0)
return (ETXTBSY);
vn_marktext(epp->ep_vp);
/*
* HP-UX ZMAGIC executables need to have their segment
* sizes frobbed.
*/
nontext = execp->ha_data + execp->ha_bss;
execp->ha_text = ctob(btoc(execp->ha_text));
execp->ha_data = ctob(btoc(execp->ha_data));
execp->ha_bss = nontext - execp->ha_data;
if (execp->ha_bss < 0)
execp->ha_bss = 0;
epp->ep_taddr = 0;
epp->ep_tsize = execp->ha_text;
epp->ep_daddr = epp->ep_taddr + roundup(execp->ha_text, HPUX_LDPGSZ);
epp->ep_dsize = execp->ha_data + execp->ha_bss;
epp->ep_entry = execp->ha_entry;
/* set up command for text segment */
NEW_VMCMD(&epp->ep_vmcmds, vmcmd_map_pagedvn, execp->ha_text,
epp->ep_taddr, epp->ep_vp, HPUX_TXTOFF(*execp, ZMAGIC),
VM_PROT_READ|VM_PROT_EXECUTE);
/* set up command for data segment */
NEW_VMCMD(&epp->ep_vmcmds, vmcmd_map_pagedvn, execp->ha_data,
epp->ep_daddr, epp->ep_vp, HPUX_DATAOFF(*execp, ZMAGIC),
VM_PROT_READ|VM_PROT_WRITE|VM_PROT_EXECUTE);
/* set up command for bss segment */
baddr = round_page(epp->ep_daddr + execp->ha_data);
bsize = epp->ep_daddr + epp->ep_dsize - baddr;
if (bsize > 0)
NEW_VMCMD(&epp->ep_vmcmds, vmcmd_map_zero, bsize, baddr,
NULLVP, 0, VM_PROT_READ|VM_PROT_WRITE|VM_PROT_EXECUTE);
return (exec_setup_stack(p, epp));
}
/*
* HP-UX's version of OMAGIC.
*/
static int
exec_hpux_prep_omagic(p, epp)
struct proc *p;
struct exec_package *epp;
{
struct hpux_exec *execp = epp->ep_hdr;
long dsize, bsize, baddr;
epp->ep_taddr = 0;
epp->ep_tsize = execp->ha_text;
epp->ep_daddr = epp->ep_taddr + roundup(execp->ha_text, HPUX_LDPGSZ);
epp->ep_dsize = execp->ha_data + execp->ha_bss;
epp->ep_entry = execp->ha_entry;
/* set up command for text and data segments */
NEW_VMCMD(&epp->ep_vmcmds, vmcmd_map_readvn,
execp->ha_text + execp->ha_data, epp->ep_taddr, epp->ep_vp,
HPUX_TXTOFF(*execp, OMAGIC),
VM_PROT_READ|VM_PROT_WRITE|VM_PROT_EXECUTE);
/* set up command for bss segment */
baddr = round_page(epp->ep_daddr + execp->ha_data);
bsize = epp->ep_daddr + epp->ep_dsize - baddr;
if (bsize > 0)
NEW_VMCMD(&epp->ep_vmcmds, vmcmd_map_zero, bsize, baddr,
NULLVP, 0, VM_PROT_READ|VM_PROT_WRITE|VM_PROT_EXECUTE);
/*
* Make sure (# of pages) mapped above equals (vm_tsize + vm_dsize);
* obreak(2) relies on this fact. Both `vm_tsize' and `vm_dsize' are
* computed (in execve(2)) by rounding *up* `ep_tsize' and `ep_dsize'
* respectively to page boundaries.
* Compensate `ep_dsize' for the amount of data covered by the last
* text page.
*/
dsize = epp->ep_dsize + execp->ha_text - round_page(execp->ha_text);
epp->ep_dsize = (dsize > 0) ? dsize : 0;
return (exec_setup_stack(p, epp));
}
/*
* The HP-UX execv(2) system call.
*
* Just check the alternate emulation path, and pass it on to the NetBSD
* execve().
*/
int
hpux_sys_execv(p, v, retval)
struct proc *p;
void *v;
register_t *retval;
{
struct hpux_sys_execv_args /* {
syscallarg(char *) path;
syscallarg(char **) argv;
} */ *uap = v;
struct sys_execve_args ap;
caddr_t sg;
sg = stackgap_init(p->p_emul);
HPUX_CHECK_ALT_EXIST(p, &sg, SCARG(uap, path));
SCARG(&ap, path) = SCARG(uap, path);
SCARG(&ap, argp) = SCARG(uap, argp);
SCARG(&ap, envp) = NULL;
return sys_execve(p, &ap, retval);
}
int
hpux_sys_execve(p, v, retval)
struct proc *p;
void *v;
register_t *retval;
{
struct hpux_sys_execve_args /* {
syscallarg(char *) path;
syscallarg(char **) argv;
syscallarg(char **) envp;
} */ *uap = v;
struct sys_execve_args ap;
caddr_t sg;
sg = stackgap_init(p->p_emul);
HPUX_CHECK_ALT_EXIST(p, &sg, SCARG(uap, path));
SCARG(&ap, path) = SCARG(uap, path);
SCARG(&ap, argp) = SCARG(uap, argp);
SCARG(&ap, envp) = SCARG(uap, envp);
return (sys_execve(p, &ap, retval));
}