File: [local] / sys / dev / ic / aic7xxx_cam.h (download)
Revision 1.1.1.1 (vendor branch), Tue Mar 4 16:10:10 2008 UTC (16 years, 6 months ago) by nbrk
Branch: OPENBSD_4_2_BASE, MAIN
CVS Tags: jornada-partial-support-wip, HEAD Changes since 1.1: +0 -0 lines
Import of OpenBSD 4.2 release kernel tree with initial code to support
Jornada 720/728, StrongARM 1110-based handheld PC.
At this point kernel roots on NFS and boots into vfs_mountroot() and traps.
What is supported:
- glass console, Jornada framebuffer (jfb) works in 16bpp direct color mode
(needs some palette tweaks for non black/white/blue colors, i think)
- saic, SA11x0 interrupt controller (needs cleanup)
- sacom, SA11x0 UART (supported only as boot console for now)
- SA11x0 GPIO controller fully supported (but can't handle multiple interrupt
handlers on one gpio pin)
- sassp, SSP port on SA11x0 that attaches spibus
- Jornada microcontroller (jmcu) to control kbd, battery, etc throught
the SPI bus (wskbd attaches on jmcu, but not tested)
- tod functions seem work
- initial code for SA-1111 (chip companion) : this is TODO
Next important steps, i think:
- gpio and intc on sa1111
- pcmcia support for sa11x0 (and sa1111 help logic)
- REAL root on nfs when we have PCMCIA support (we may use any of supported pccard NICs)
- root on wd0! (using already supported PCMCIA-ATA)
|
/* $OpenBSD: aic7xxx_cam.h,v 1.6 2005/12/10 02:45:20 krw Exp $ */
/* $NetBSD: aic7xxx_cam.h,v 1.3 2003/04/20 11:17:20 fvdl Exp $ */
/*
* Data structures and definitions for the CAM system.
*
* Copyright (c) 1997 Justin T. Gibbs.
* Copyright (c) 2000 Adaptec Inc.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL").
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
*/
/*
* Ported from FreeBSD by Pascal Renauld, Network Storage Solutions, Inc. - April 2003
*/
#ifndef _AIC7XXX_CAM_H
#define _AIC7XXX_CAM_H
#define SCSI_REV_2 2
#define CAM_BUS_WILDCARD ((u_int)~0)
#define CAM_TARGET_WILDCARD ((u_int)~0)
#define CAM_LUN_WILDCARD -1
/*
* Translate FreeBSD names for SCSI status byte values to OpenBSD names.
*/
#define SCSI_STATUS_OK SCSI_OK
#define SCSI_STATUS_CHECK_COND SCSI_CHECK
#define SCSI_STATUS_COND_MET SCSI_COND_MET
#define SCSI_STATUS_BUSY SCSI_BUSY
#define SCSI_STATUS_INTERMED SCSI_INTERM
#define SCSI_STATUS_INTERMED_COND_MET SCSI_INTERMED_COND_MET
#define SCSI_STATUS_RESERV_CONFLICT SCSI_RESERV_CONFLICT
#define SCSI_STATUS_CMD_TERMINATED SCSI_TERMINATED
#define SCSI_STATUS_QUEUE_FULL SCSI_QUEUE_FULL
#define XS_CTL_DATA_IN SCSI_DATA_IN
#define XS_CTL_POLL SCSI_POLL
#define XS_CTL_RESET SCSI_RESET
#define MSG_EXT_PPR_QAS_REQ MSG_EXT_PPR_PROT_QAS
#define MSG_EXT_PPR_IU_REQ MSG_EXT_PPR_PROT_IUS
#define MSG_EXT_PPR_DT_REQ MSG_EXT_PPR_PROT_DT
#define MSG_ORDERED_TASK MSG_ORDERED_Q_TAG
#define MSG_SIMPLE_TASK MSG_SIMPLE_Q_TAG
#define MSG_ABORT_TASK MSG_ABORT_TAG
#define scsipi_channel scsi_link
#define scsipi_xfer scsi_xfer
#define scsipi_adapter scsi_adapter
#define scsipi_sense_data scsi_sense_data
#define scsipi_sense scsi_sense
#define scsipi_periph scsi_link
#define callout_reset(timer, timeout, func, arg) do { \
if (!timeout_initialized((timer))) \
timeout_set((timer), (func), (arg)); \
timeout_add((timer), (timeout)); \
} while (0)
#define aic_delay DELAY
#define aic_htobe16(x) htobe16(x)
#define aic_htobe32(x) htobe32(x)
#define aic_htobe64(x) htobe64(x)
#define aic_htole16(x) htole16(x)
#define aic_htole32(x) htole32(x)
#define aic_htole64(x) htole64(x)
#define aic_be16toh(x) be16toh(x)
#define aic_be32toh(x) be32toh(x)
#define aic_be64toh(x) be64toh(x)
#define aic_le16toh(x) letoh16(x)
#define aic_le32toh(x) letoh32(x)
#define aic_le64toh(x) letoh64(x)
#define xs_control flags
#define xs_callout stimeout
#define xs_status status
/* CAM Status field values */
typedef enum {
CAM_REQ_INPROG, /* CCB request is in progress */
CAM_REQ_CMP, /* CCB request completed without error */
CAM_REQ_ABORTED, /* CCB request aborted by the host */
CAM_UA_ABORT, /* Unable to abort CCB request */
CAM_REQ_CMP_ERR, /* CCB request completed with an error */
CAM_BUSY, /* CAM subsytem is busy */
CAM_REQ_INVALID, /* CCB request was invalid */
CAM_PATH_INVALID, /* Supplied Path ID is invalid */
CAM_SEL_TIMEOUT, /* Target Selection Timeout */
CAM_CMD_TIMEOUT, /* Command timeout */
CAM_SCSI_STATUS_ERROR, /* SCSI error, look at error code in CCB */
CAM_SCSI_BUS_RESET, /* SCSI Bus Reset Sent/Received */
CAM_UNCOR_PARITY, /* Uncorrectable parity error occurred */
CAM_AUTOSENSE_FAIL, /* Autosense: request sense cmd fail */
CAM_NO_HBA, /* No HBA Detected Error */
CAM_DATA_RUN_ERR, /* Data Overrun error */
CAM_UNEXP_BUSFREE, /* Unexpected Bus Free */
CAM_SEQUENCE_FAIL, /* Protocol Violation */
CAM_CCB_LEN_ERR, /* CCB length supplied is inadequate */
CAM_PROVIDE_FAIL, /* Unable to provide requested capability */
CAM_BDR_SENT, /* A SCSI BDR msg was sent to target */
CAM_REQ_TERMIO, /* CCB request terminated by the host */
CAM_UNREC_HBA_ERROR, /* Unrecoverable Host Bus Adapter Error */
CAM_REQ_TOO_BIG, /* The request was too large for this host */
CAM_UA_TERMIO, /* Unable to terminate I/O CCB request */
CAM_MSG_REJECT_REC, /* Message Reject Received */
CAM_DEV_NOT_THERE, /* SCSI Device Not Installed/there */
CAM_RESRC_UNAVAIL, /* Resource Unavailable */
/*
* This request should be requeued to preserve
* transaction ordering. This typically occurs
* when the SIM recognizes an error that should
* freeze the queue and must place additional
* requests for the target at the sim level
* back into the XPT queue.
*/
CAM_REQUEUE_REQ,
CAM_DEV_QFRZN = 0x40,
CAM_STATUS_MASK = 0x3F
} cam_status;
typedef enum {
CAM_DIR_IN = SCSI_DATA_IN,
CAM_DIR_OUT = SCSI_DATA_OUT
} ccb_flags;
typedef enum {
AC_BUS_RESET = 0x001,
AC_UNSOL_RESEL = 0x002,
AC_SCSI_AEN = 0x008,
AC_SENT_BDR = 0x010,
AC_PATH_REGISTERED = 0x020,
AC_PATH_DEREGISTERED = 0x040,
AC_FOUND_DEVICE = 0x080,
AC_LOST_DEVICE = 0x100,
AC_TRANSFER_NEG = 0x200,
AC_INQ_CHANGED = 0x400,
AC_GETDEV_CHANGED = 0x800
} ac_code;
#endif /* _AIC7XXX_CAM_H */