File: [local] / sys / dev / ic / com.c (download)
Revision 1.1.1.1 (vendor branch), Tue Mar 4 16:10:26 2008 UTC (16 years, 6 months ago) by nbrk
Branch: OPENBSD_4_2_BASE, MAIN
CVS Tags: jornada-partial-support-wip, HEAD Changes since 1.1: +0 -0 lines
Import of OpenBSD 4.2 release kernel tree with initial code to support
Jornada 720/728, StrongARM 1110-based handheld PC.
At this point kernel roots on NFS and boots into vfs_mountroot() and traps.
What is supported:
- glass console, Jornada framebuffer (jfb) works in 16bpp direct color mode
(needs some palette tweaks for non black/white/blue colors, i think)
- saic, SA11x0 interrupt controller (needs cleanup)
- sacom, SA11x0 UART (supported only as boot console for now)
- SA11x0 GPIO controller fully supported (but can't handle multiple interrupt
handlers on one gpio pin)
- sassp, SSP port on SA11x0 that attaches spibus
- Jornada microcontroller (jmcu) to control kbd, battery, etc throught
the SPI bus (wskbd attaches on jmcu, but not tested)
- tod functions seem work
- initial code for SA-1111 (chip companion) : this is TODO
Next important steps, i think:
- gpio and intc on sa1111
- pcmcia support for sa11x0 (and sa1111 help logic)
- REAL root on nfs when we have PCMCIA support (we may use any of supported pccard NICs)
- root on wd0! (using already supported PCMCIA-ATA)
|
/* $OpenBSD: com.c,v 1.117 2007/07/15 19:25:49 kettenis Exp $ */
/* $NetBSD: com.c,v 1.82.4.1 1996/06/02 09:08:00 mrg Exp $ */
/*
* Copyright (c) 1997 - 1999, Jason Downs. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR(S) ``AS IS'' AND ANY EXPRESS
* OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE AUTHOR(S) BE LIABLE FOR ANY DIRECT,
* INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/*-
* Copyright (c) 1993, 1994, 1995, 1996
* Charles M. Hannum. All rights reserved.
* Copyright (c) 1991 The Regents of the University of California.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @(#)com.c 7.5 (Berkeley) 5/16/91
*/
/*
* COM driver, based on HP dca driver
* uses National Semiconductor NS16450/NS16550AF UART
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/ioctl.h>
#include <sys/selinfo.h>
#include <sys/tty.h>
#include <sys/proc.h>
#include <sys/user.h>
#include <sys/conf.h>
#include <sys/file.h>
#include <sys/uio.h>
#include <sys/kernel.h>
#include <sys/syslog.h>
#include <sys/device.h>
#include <sys/vnode.h>
#ifdef DDB
#include <ddb/db_var.h>
#endif
#include <machine/bus.h>
#if defined(__sparc64__) || !defined(__sparc__)
#include <machine/intr.h>
#endif
#if !defined(__sparc__) || defined(__sparc64__)
#define COM_CONSOLE
#include <dev/cons.h>
#endif
#include <dev/ic/comreg.h>
#include <dev/ic/comvar.h>
#include <dev/ic/ns16550reg.h>
#define com_lcr com_cfcr
#ifdef COM_PXA2X0
#define com_isr 8
#define ISR_SEND (ISR_RXPL | ISR_XMODE | ISR_XMITIR)
#define ISR_RECV (ISR_RXPL | ISR_XMODE | ISR_RCVEIR)
#endif
#ifdef __zaurus__
#include <arch/zaurus/dev/zaurus_scoopvar.h>
#endif
/* XXX: These belong elsewhere */
cdev_decl(com);
static u_char tiocm_xxx2mcr(int);
void compwroff(struct com_softc *);
void cominit(bus_space_tag_t, bus_space_handle_t, int, int);
int com_is_console(bus_space_tag_t, bus_addr_t);
struct cfdriver com_cd = {
NULL, "com", DV_TTY
};
int comdefaultrate = TTYDEF_SPEED;
#ifdef COM_PXA2X0
bus_addr_t comsiraddr;
#endif
#ifdef COM_CONSOLE
int comconsfreq;
int comconsinit;
bus_addr_t comconsaddr;
int comconsattached;
bus_space_tag_t comconsiot;
bus_space_handle_t comconsioh;
tcflag_t comconscflag = TTYDEF_CFLAG;
#endif
int commajor;
#ifdef KGDB
#include <sys/kgdb.h>
bus_addr_t com_kgdb_addr;
bus_space_tag_t com_kgdb_iot;
bus_space_handle_t com_kgdb_ioh;
int com_kgdb_getc(void *);
void com_kgdb_putc(void *, int);
#endif /* KGDB */
#define DEVUNIT(x) (minor(x) & 0x7f)
#define DEVCUA(x) (minor(x) & 0x80)
int
comspeed(long freq, long speed)
{
#define divrnd(n, q) (((n)*2/(q)+1)/2) /* divide and round off */
int x, err;
if (speed == 0)
return 0;
if (speed < 0)
return -1;
x = divrnd((freq / 16), speed);
if (x <= 0)
return -1;
err = divrnd((quad_t)freq * 1000 / 16, speed * x) - 1000;
if (err < 0)
err = -err;
if (err > COM_TOLERANCE)
return -1;
return x;
#undef divrnd
}
#ifdef COM_CONSOLE
int
comprobe1(bus_space_tag_t iot, bus_space_handle_t ioh)
{
int i, k;
/* force access to id reg */
bus_space_write_1(iot, ioh, com_lcr, 0);
bus_space_write_1(iot, ioh, com_iir, 0);
for (i = 0; i < 32; i++) {
k = bus_space_read_1(iot, ioh, com_iir);
if (k & 0x38) {
bus_space_read_1(iot, ioh, com_data); /* cleanup */
} else
break;
}
if (i >= 32)
return 0;
return 1;
}
#endif
int
com_detach(struct device *self, int flags)
{
struct com_softc *sc = (struct com_softc *)self;
int maj, mn;
sc->sc_swflags |= COM_SW_DEAD;
/* locate the major number */
for (maj = 0; maj < nchrdev; maj++)
if (cdevsw[maj].d_open == comopen)
break;
/* Nuke the vnodes for any open instances. */
mn = self->dv_unit;
vdevgone(maj, mn, mn, VCHR);
/* XXX a symbolic constant for the cua bit would be nicer. */
mn |= 0x80;
vdevgone(maj, mn, mn, VCHR);
/* Detach and free the tty. */
if (sc->sc_tty) {
ttyfree(sc->sc_tty);
}
timeout_del(&sc->sc_dtr_tmo);
timeout_del(&sc->sc_diag_tmo);
#ifdef __HAVE_GENERIC_SOFT_INTERRUPTS
softintr_disestablish(sc->sc_si);
#else
timeout_del(&sc->sc_comsoft_tmo);
#endif
return (0);
}
int
com_activate(struct device *self, enum devact act)
{
struct com_softc *sc = (struct com_softc *)self;
int s, rv = 0;
s = spltty();
switch (act) {
case DVACT_ACTIVATE:
break;
case DVACT_DEACTIVATE:
#ifdef KGDB
if (sc->sc_hwflags & (COM_HW_CONSOLE|COM_HW_KGDB)) {
#else
if (sc->sc_hwflags & COM_HW_CONSOLE) {
#endif /* KGDB */
rv = EBUSY;
break;
}
if (sc->disable != NULL && sc->enabled != 0) {
(*sc->disable)(sc);
sc->enabled = 0;
}
break;
}
splx(s);
return (rv);
}
int
comopen(dev_t dev, int flag, int mode, struct proc *p)
{
int unit = DEVUNIT(dev);
struct com_softc *sc;
bus_space_tag_t iot;
bus_space_handle_t ioh;
struct tty *tp;
int s;
int error = 0;
if (unit >= com_cd.cd_ndevs)
return ENXIO;
sc = com_cd.cd_devs[unit];
if (!sc)
return ENXIO;
#ifdef KGDB
/*
* If this is the kgdb port, no other use is permitted.
*/
if (ISSET(sc->sc_hwflags, COM_HW_KGDB))
return (EBUSY);
#endif /* KGDB */
s = spltty();
if (!sc->sc_tty) {
tp = sc->sc_tty = ttymalloc();
} else
tp = sc->sc_tty;
splx(s);
tp->t_oproc = comstart;
tp->t_param = comparam;
tp->t_dev = dev;
if (!ISSET(tp->t_state, TS_ISOPEN)) {
SET(tp->t_state, TS_WOPEN);
ttychars(tp);
tp->t_iflag = TTYDEF_IFLAG;
tp->t_oflag = TTYDEF_OFLAG;
#ifdef COM_CONSOLE
if (ISSET(sc->sc_hwflags, COM_HW_CONSOLE))
tp->t_cflag = comconscflag;
else
#endif
tp->t_cflag = TTYDEF_CFLAG;
if (ISSET(sc->sc_swflags, COM_SW_CLOCAL))
SET(tp->t_cflag, CLOCAL);
if (ISSET(sc->sc_swflags, COM_SW_CRTSCTS))
SET(tp->t_cflag, CRTSCTS);
if (ISSET(sc->sc_swflags, COM_SW_MDMBUF))
SET(tp->t_cflag, MDMBUF);
tp->t_lflag = TTYDEF_LFLAG;
tp->t_ispeed = tp->t_ospeed = comdefaultrate;
s = spltty();
sc->sc_initialize = 1;
comparam(tp, &tp->t_termios);
ttsetwater(tp);
#ifndef __HAVE_GENERIC_SOFT_INTERRUPTS
timeout_add(&sc->sc_comsoft_tmo, 1);
#endif
sc->sc_ibufp = sc->sc_ibuf = sc->sc_ibufs[0];
sc->sc_ibufhigh = sc->sc_ibuf + COM_IHIGHWATER;
sc->sc_ibufend = sc->sc_ibuf + COM_IBUFSIZE;
iot = sc->sc_iot;
ioh = sc->sc_ioh;
/*
* Wake up the sleepy heads.
*/
switch (sc->sc_uarttype) {
case COM_UART_ST16650:
case COM_UART_ST16650V2:
bus_space_write_1(iot, ioh, com_lcr, LCR_EFR);
bus_space_write_1(iot, ioh, com_efr, EFR_ECB);
bus_space_write_1(iot, ioh, com_ier, 0);
bus_space_write_1(iot, ioh, com_efr, 0);
bus_space_write_1(iot, ioh, com_lcr, 0);
break;
case COM_UART_TI16750:
bus_space_write_1(iot, ioh, com_ier, 0);
break;
case COM_UART_PXA2X0:
bus_space_write_1(iot, ioh, com_ier, IER_EUART);
break;
}
if (ISSET(sc->sc_hwflags, COM_HW_FIFO)) {
u_int8_t fifo = FIFO_ENABLE|FIFO_RCV_RST|FIFO_XMT_RST;
u_int8_t lcr;
if (tp->t_ispeed <= 1200)
fifo |= FIFO_TRIGGER_1;
else
fifo |= FIFO_TRIGGER_8;
if (sc->sc_uarttype == COM_UART_TI16750) {
fifo |= FIFO_ENABLE_64BYTE;
lcr = bus_space_read_1(iot, ioh, com_lcr);
bus_space_write_1(iot, ioh, com_lcr,
lcr | LCR_DLAB);
}
/*
* (Re)enable and drain FIFOs.
*
* Certain SMC chips cause problems if the FIFOs are
* enabled while input is ready. Turn off the FIFO
* if necessary to clear the input. Test the input
* ready bit after enabling the FIFOs to handle races
* between enabling and fresh input.
*
* Set the FIFO threshold based on the receive speed.
*/
for (;;) {
bus_space_write_1(iot, ioh, com_fifo, 0);
delay(100);
(void) bus_space_read_1(iot, ioh, com_data);
bus_space_write_1(iot, ioh, com_fifo, fifo |
FIFO_RCV_RST | FIFO_XMT_RST);
delay(100);
if(!ISSET(bus_space_read_1(iot, ioh,
com_lsr), LSR_RXRDY))
break;
}
if (sc->sc_uarttype == COM_UART_TI16750)
bus_space_write_1(iot, ioh, com_lcr, lcr);
}
/* flush any pending I/O */
while (ISSET(bus_space_read_1(iot, ioh, com_lsr), LSR_RXRDY))
(void) bus_space_read_1(iot, ioh, com_data);
/* you turn me on, baby */
sc->sc_mcr = MCR_DTR | MCR_RTS;
if (!ISSET(sc->sc_hwflags, COM_HW_NOIEN))
SET(sc->sc_mcr, MCR_IENABLE);
bus_space_write_1(iot, ioh, com_mcr, sc->sc_mcr);
sc->sc_ier = IER_ERXRDY | IER_ERLS | IER_EMSC;
#ifdef COM_PXA2X0
if (sc->sc_uarttype == COM_UART_PXA2X0)
sc->sc_ier |= IER_EUART | IER_ERXTOUT;
#endif
bus_space_write_1(iot, ioh, com_ier, sc->sc_ier);
sc->sc_msr = bus_space_read_1(iot, ioh, com_msr);
if (ISSET(sc->sc_swflags, COM_SW_SOFTCAR) || DEVCUA(dev) ||
ISSET(sc->sc_msr, MSR_DCD) || ISSET(tp->t_cflag, MDMBUF))
SET(tp->t_state, TS_CARR_ON);
else
CLR(tp->t_state, TS_CARR_ON);
#ifdef COM_PXA2X0
if (sc->sc_uarttype == COM_UART_PXA2X0 &&
ISSET(sc->sc_hwflags, COM_HW_SIR)) {
bus_space_write_1(iot, ioh, com_isr, ISR_RECV);
#ifdef __zaurus__
scoop_set_irled(1);
#endif
}
#endif
} else if (ISSET(tp->t_state, TS_XCLUDE) && p->p_ucred->cr_uid != 0)
return EBUSY;
else
s = spltty();
if (DEVCUA(dev)) {
if (ISSET(tp->t_state, TS_ISOPEN)) {
/* Ah, but someone already is dialed in... */
splx(s);
return EBUSY;
}
sc->sc_cua = 1; /* We go into CUA mode */
} else {
/* tty (not cua) device; wait for carrier if necessary */
if (ISSET(flag, O_NONBLOCK)) {
if (sc->sc_cua) {
/* Opening TTY non-blocking... but the CUA is busy */
splx(s);
return EBUSY;
}
} else {
while (sc->sc_cua ||
(!ISSET(tp->t_cflag, CLOCAL) &&
!ISSET(tp->t_state, TS_CARR_ON))) {
SET(tp->t_state, TS_WOPEN);
error = ttysleep(tp, &tp->t_rawq, TTIPRI | PCATCH, ttopen, 0);
/*
* If TS_WOPEN has been reset, that means the cua device
* has been closed. We don't want to fail in that case,
* so just go around again.
*/
if (error && ISSET(tp->t_state, TS_WOPEN)) {
CLR(tp->t_state, TS_WOPEN);
if (!sc->sc_cua && !ISSET(tp->t_state, TS_ISOPEN))
compwroff(sc);
splx(s);
return error;
}
}
}
}
splx(s);
return (*linesw[tp->t_line].l_open)(dev, tp);
}
int
comclose(dev_t dev, int flag, int mode, struct proc *p)
{
int unit = DEVUNIT(dev);
struct com_softc *sc = com_cd.cd_devs[unit];
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
struct tty *tp = sc->sc_tty;
int s;
#ifdef COM_CONSOLE
/* XXX This is for cons.c. */
if (!ISSET(tp->t_state, TS_ISOPEN))
return 0;
#endif
if(sc->sc_swflags & COM_SW_DEAD)
return 0;
(*linesw[tp->t_line].l_close)(tp, flag);
s = spltty();
if (ISSET(tp->t_state, TS_WOPEN)) {
/* tty device is waiting for carrier; drop dtr then re-raise */
CLR(sc->sc_mcr, MCR_DTR | MCR_RTS);
bus_space_write_1(iot, ioh, com_mcr, sc->sc_mcr);
timeout_add(&sc->sc_dtr_tmo, hz * 2);
} else {
/* no one else waiting; turn off the uart */
compwroff(sc);
}
CLR(tp->t_state, TS_BUSY | TS_FLUSH);
#ifndef __HAVE_GENERIC_SOFT_INTERRUPTS
timeout_del(&sc->sc_comsoft_tmo);
#endif
sc->sc_cua = 0;
splx(s);
ttyclose(tp);
#ifdef COM_CONSOLE
#ifdef notyet /* XXXX */
if (ISSET(sc->sc_hwflags, COM_HW_CONSOLE)) {
ttyfree(tp);
sc->sc_tty = 0;
}
#endif
#endif
return 0;
}
void
compwroff(struct com_softc *sc)
{
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
struct tty *tp = sc->sc_tty;
CLR(sc->sc_lcr, LCR_SBREAK);
bus_space_write_1(iot, ioh, com_lcr, sc->sc_lcr);
bus_space_write_1(iot, ioh, com_ier, 0);
if (ISSET(tp->t_cflag, HUPCL) &&
!ISSET(sc->sc_swflags, COM_SW_SOFTCAR)) {
/* XXX perhaps only clear DTR */
sc->sc_mcr = 0;
bus_space_write_1(iot, ioh, com_mcr, sc->sc_mcr);
}
/*
* Turn FIFO off; enter sleep mode if possible.
*/
bus_space_write_1(iot, ioh, com_fifo, 0);
delay(100);
(void) bus_space_read_1(iot, ioh, com_data);
delay(100);
bus_space_write_1(iot, ioh, com_fifo,
FIFO_RCV_RST | FIFO_XMT_RST);
switch (sc->sc_uarttype) {
case COM_UART_ST16650:
case COM_UART_ST16650V2:
bus_space_write_1(iot, ioh, com_lcr, LCR_EFR);
bus_space_write_1(iot, ioh, com_efr, EFR_ECB);
bus_space_write_1(iot, ioh, com_ier, IER_SLEEP);
bus_space_write_1(iot, ioh, com_lcr, 0);
break;
case COM_UART_TI16750:
bus_space_write_1(iot, ioh, com_ier, IER_SLEEP);
break;
#ifdef COM_PXA2X0
case COM_UART_PXA2X0:
bus_space_write_1(iot, ioh, com_ier, 0);
#ifdef __zaurus__
if (ISSET(sc->sc_hwflags, COM_HW_SIR))
scoop_set_irled(0);
#endif
break;
#endif
}
}
void
com_raisedtr(void *arg)
{
struct com_softc *sc = arg;
SET(sc->sc_mcr, MCR_DTR | MCR_RTS);
bus_space_write_1(sc->sc_iot, sc->sc_ioh, com_mcr, sc->sc_mcr);
}
int
comread(dev_t dev, struct uio *uio, int flag)
{
struct com_softc *sc = com_cd.cd_devs[DEVUNIT(dev)];
struct tty *tp = sc->sc_tty;
return ((*linesw[tp->t_line].l_read)(tp, uio, flag));
}
int
comwrite(dev_t dev, struct uio *uio, int flag)
{
struct com_softc *sc = com_cd.cd_devs[DEVUNIT(dev)];
struct tty *tp = sc->sc_tty;
return ((*linesw[tp->t_line].l_write)(tp, uio, flag));
}
struct tty *
comtty(dev_t dev)
{
struct com_softc *sc = com_cd.cd_devs[DEVUNIT(dev)];
struct tty *tp = sc->sc_tty;
return (tp);
}
static u_char
tiocm_xxx2mcr(int data)
{
u_char m = 0;
if (ISSET(data, TIOCM_DTR))
SET(m, MCR_DTR);
if (ISSET(data, TIOCM_RTS))
SET(m, MCR_RTS);
return m;
}
int
comioctl(dev_t dev, u_long cmd, caddr_t data, int flag, struct proc *p)
{
int unit = DEVUNIT(dev);
struct com_softc *sc = com_cd.cd_devs[unit];
struct tty *tp = sc->sc_tty;
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
int error;
error = (*linesw[tp->t_line].l_ioctl)(tp, cmd, data, flag, p);
if (error >= 0)
return error;
error = ttioctl(tp, cmd, data, flag, p);
if (error >= 0)
return error;
switch (cmd) {
case TIOCSBRK:
SET(sc->sc_lcr, LCR_SBREAK);
bus_space_write_1(iot, ioh, com_lcr, sc->sc_lcr);
break;
case TIOCCBRK:
CLR(sc->sc_lcr, LCR_SBREAK);
bus_space_write_1(iot, ioh, com_lcr, sc->sc_lcr);
break;
case TIOCSDTR:
SET(sc->sc_mcr, sc->sc_dtr);
bus_space_write_1(iot, ioh, com_mcr, sc->sc_mcr);
break;
case TIOCCDTR:
CLR(sc->sc_mcr, sc->sc_dtr);
bus_space_write_1(iot, ioh, com_mcr, sc->sc_mcr);
break;
case TIOCMSET:
CLR(sc->sc_mcr, MCR_DTR | MCR_RTS);
case TIOCMBIS:
SET(sc->sc_mcr, tiocm_xxx2mcr(*(int *)data));
bus_space_write_1(iot, ioh, com_mcr, sc->sc_mcr);
break;
case TIOCMBIC:
CLR(sc->sc_mcr, tiocm_xxx2mcr(*(int *)data));
bus_space_write_1(iot, ioh, com_mcr, sc->sc_mcr);
break;
case TIOCMGET: {
u_char m;
int bits = 0;
m = sc->sc_mcr;
if (ISSET(m, MCR_DTR))
SET(bits, TIOCM_DTR);
if (ISSET(m, MCR_RTS))
SET(bits, TIOCM_RTS);
m = sc->sc_msr;
if (ISSET(m, MSR_DCD))
SET(bits, TIOCM_CD);
if (ISSET(m, MSR_CTS))
SET(bits, TIOCM_CTS);
if (ISSET(m, MSR_DSR))
SET(bits, TIOCM_DSR);
if (ISSET(m, MSR_RI | MSR_TERI))
SET(bits, TIOCM_RI);
if (bus_space_read_1(iot, ioh, com_ier))
SET(bits, TIOCM_LE);
*(int *)data = bits;
break;
}
case TIOCGFLAGS: {
int driverbits, userbits = 0;
driverbits = sc->sc_swflags;
if (ISSET(driverbits, COM_SW_SOFTCAR))
SET(userbits, TIOCFLAG_SOFTCAR);
if (ISSET(driverbits, COM_SW_CLOCAL))
SET(userbits, TIOCFLAG_CLOCAL);
if (ISSET(driverbits, COM_SW_CRTSCTS))
SET(userbits, TIOCFLAG_CRTSCTS);
if (ISSET(driverbits, COM_SW_MDMBUF))
SET(userbits, TIOCFLAG_MDMBUF);
if (ISSET(driverbits, COM_SW_PPS))
SET(userbits, TIOCFLAG_PPS);
*(int *)data = userbits;
break;
}
case TIOCSFLAGS: {
int userbits, driverbits = 0;
error = suser(p, 0);
if (error != 0)
return(EPERM);
userbits = *(int *)data;
if (ISSET(userbits, TIOCFLAG_SOFTCAR) ||
ISSET(sc->sc_hwflags, COM_HW_CONSOLE))
SET(driverbits, COM_SW_SOFTCAR);
if (ISSET(userbits, TIOCFLAG_CLOCAL))
SET(driverbits, COM_SW_CLOCAL);
if (ISSET(userbits, TIOCFLAG_CRTSCTS))
SET(driverbits, COM_SW_CRTSCTS);
if (ISSET(userbits, TIOCFLAG_MDMBUF))
SET(driverbits, COM_SW_MDMBUF);
if (ISSET(userbits, TIOCFLAG_PPS))
SET(driverbits, COM_SW_PPS);
sc->sc_swflags = driverbits;
break;
}
default:
return ENOTTY;
}
return 0;
}
/* already called at spltty */
int
comparam(struct tty *tp, struct termios *t)
{
struct com_softc *sc = com_cd.cd_devs[DEVUNIT(tp->t_dev)];
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
int ospeed = comspeed(sc->sc_frequency, t->c_ospeed);
u_char lcr;
tcflag_t oldcflag;
/* check requested parameters */
if (ospeed < 0 || (t->c_ispeed && t->c_ispeed != t->c_ospeed))
return EINVAL;
lcr = ISSET(sc->sc_lcr, LCR_SBREAK);
switch (ISSET(t->c_cflag, CSIZE)) {
case CS5:
SET(lcr, LCR_5BITS);
break;
case CS6:
SET(lcr, LCR_6BITS);
break;
case CS7:
SET(lcr, LCR_7BITS);
break;
case CS8:
SET(lcr, LCR_8BITS);
break;
}
if (ISSET(t->c_cflag, PARENB)) {
SET(lcr, LCR_PENAB);
if (!ISSET(t->c_cflag, PARODD))
SET(lcr, LCR_PEVEN);
}
if (ISSET(t->c_cflag, CSTOPB))
SET(lcr, LCR_STOPB);
sc->sc_lcr = lcr;
if (ospeed == 0) {
CLR(sc->sc_mcr, MCR_DTR);
bus_space_write_1(iot, ioh, com_mcr, sc->sc_mcr);
}
/*
* Set the FIFO threshold based on the receive speed, if we are
* changing it.
*/
if (sc->sc_initialize || (tp->t_ispeed != t->c_ispeed)) {
sc->sc_initialize = 0;
if (ospeed != 0) {
/*
* Make sure the transmit FIFO is empty before
* proceeding. If we don't do this, some revisions
* of the UART will hang. Interestingly enough,
* even if we do this while the last character is
* still being pushed out, they don't hang. This
* seems good enough.
*/
while (ISSET(tp->t_state, TS_BUSY)) {
int error;
++sc->sc_halt;
error = ttysleep(tp, &tp->t_outq,
TTOPRI | PCATCH, "comprm", 0);
--sc->sc_halt;
if (error) {
comstart(tp);
return (error);
}
}
bus_space_write_1(iot, ioh, com_lcr, lcr | LCR_DLAB);
bus_space_write_1(iot, ioh, com_dlbl, ospeed);
bus_space_write_1(iot, ioh, com_dlbh, ospeed >> 8);
bus_space_write_1(iot, ioh, com_lcr, lcr);
SET(sc->sc_mcr, MCR_DTR);
bus_space_write_1(iot, ioh, com_mcr, sc->sc_mcr);
} else
bus_space_write_1(iot, ioh, com_lcr, lcr);
if (ISSET(sc->sc_hwflags, COM_HW_FIFO)) {
if (sc->sc_uarttype == COM_UART_TI16750) {
bus_space_write_1(iot, ioh, com_lcr,
lcr | LCR_DLAB);
bus_space_write_1(iot, ioh, com_fifo,
FIFO_ENABLE | FIFO_ENABLE_64BYTE |
(t->c_ispeed <= 1200 ? FIFO_TRIGGER_1 : FIFO_TRIGGER_8));
bus_space_write_1(iot, ioh, com_lcr, lcr);
} else
bus_space_write_1(iot, ioh, com_fifo,
FIFO_ENABLE |
(t->c_ispeed <= 1200 ? FIFO_TRIGGER_1 : FIFO_TRIGGER_8));
}
} else
bus_space_write_1(iot, ioh, com_lcr, lcr);
/* When not using CRTSCTS, RTS follows DTR. */
if (!ISSET(t->c_cflag, CRTSCTS)) {
if (ISSET(sc->sc_mcr, MCR_DTR)) {
if (!ISSET(sc->sc_mcr, MCR_RTS)) {
SET(sc->sc_mcr, MCR_RTS);
bus_space_write_1(iot, ioh, com_mcr, sc->sc_mcr);
}
} else {
if (ISSET(sc->sc_mcr, MCR_RTS)) {
CLR(sc->sc_mcr, MCR_RTS);
bus_space_write_1(iot, ioh, com_mcr, sc->sc_mcr);
}
}
sc->sc_dtr = MCR_DTR | MCR_RTS;
} else
sc->sc_dtr = MCR_DTR;
/* and copy to tty */
tp->t_ispeed = t->c_ispeed;
tp->t_ospeed = t->c_ospeed;
oldcflag = tp->t_cflag;
tp->t_cflag = t->c_cflag;
/*
* If DCD is off and MDMBUF is changed, ask the tty layer if we should
* stop the device.
*/
if (!ISSET(sc->sc_msr, MSR_DCD) &&
!ISSET(sc->sc_swflags, COM_SW_SOFTCAR) &&
ISSET(oldcflag, MDMBUF) != ISSET(tp->t_cflag, MDMBUF) &&
(*linesw[tp->t_line].l_modem)(tp, 0) == 0) {
CLR(sc->sc_mcr, sc->sc_dtr);
bus_space_write_1(iot, ioh, com_mcr, sc->sc_mcr);
}
/* Just to be sure... */
comstart(tp);
return 0;
}
void
comstart(struct tty *tp)
{
struct com_softc *sc = com_cd.cd_devs[DEVUNIT(tp->t_dev)];
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
int s;
s = spltty();
if (ISSET(tp->t_state, TS_BUSY))
goto out;
if (ISSET(tp->t_state, TS_TIMEOUT | TS_TTSTOP) || sc->sc_halt > 0)
goto stopped;
if (ISSET(tp->t_cflag, CRTSCTS) && !ISSET(sc->sc_msr, MSR_CTS))
goto stopped;
if (tp->t_outq.c_cc <= tp->t_lowat) {
if (ISSET(tp->t_state, TS_ASLEEP)) {
CLR(tp->t_state, TS_ASLEEP);
wakeup(&tp->t_outq);
}
if (tp->t_outq.c_cc == 0)
goto stopped;
selwakeup(&tp->t_wsel);
}
SET(tp->t_state, TS_BUSY);
#ifdef COM_PXA2X0
/* Enable transmitter slow infrared mode. */
if (sc->sc_uarttype == COM_UART_PXA2X0 &&
ISSET(sc->sc_hwflags, COM_HW_SIR))
bus_space_write_1(iot, ioh, com_isr, ISR_SEND);
#endif
/* Enable transmit completion interrupts. */
if (!ISSET(sc->sc_ier, IER_ETXRDY)) {
SET(sc->sc_ier, IER_ETXRDY);
bus_space_write_1(iot, ioh, com_ier, sc->sc_ier);
}
if (ISSET(sc->sc_hwflags, COM_HW_FIFO)) {
u_char buffer[64]; /* XXX: largest fifo */
int n = q_to_b(&tp->t_outq, buffer, sc->sc_fifolen);
int i;
for (i = 0; i < n; i++) {
bus_space_write_1(iot, ioh, com_data, buffer[i]);
}
} else if (tp->t_outq.c_cc != 0)
bus_space_write_1(iot, ioh, com_data, getc(&tp->t_outq));
out:
splx(s);
return;
stopped:
if (ISSET(sc->sc_ier, IER_ETXRDY)) {
CLR(sc->sc_ier, IER_ETXRDY);
bus_space_write_1(iot, ioh, com_ier, sc->sc_ier);
#ifdef COM_PXA2X0
if (sc->sc_uarttype == COM_UART_PXA2X0 &&
ISSET(sc->sc_hwflags, COM_HW_SIR)) {
int timo;
/* Wait for empty transmit shift register. */
timo = 20000;
while (!ISSET(bus_space_read_1(iot, ioh, com_lsr),
LSR_TSRE) && --timo)
delay(1);
/* Enable receiver slow infrared mode. */
bus_space_write_1(iot, ioh, com_isr, ISR_RECV);
}
#endif
}
splx(s);
}
/*
* Stop output on a line.
*/
int
comstop(struct tty *tp, int flag)
{
int s;
s = spltty();
if (ISSET(tp->t_state, TS_BUSY))
if (!ISSET(tp->t_state, TS_TTSTOP))
SET(tp->t_state, TS_FLUSH);
splx(s);
return 0;
}
void
comdiag(void *arg)
{
struct com_softc *sc = arg;
int overflows, floods;
int s;
s = spltty();
sc->sc_errors = 0;
overflows = sc->sc_overflows;
sc->sc_overflows = 0;
floods = sc->sc_floods;
sc->sc_floods = 0;
splx(s);
log(LOG_WARNING, "%s: %d silo overflow%s, %d ibuf overflow%s\n",
sc->sc_dev.dv_xname,
overflows, overflows == 1 ? "" : "s",
floods, floods == 1 ? "" : "s");
}
void
comsoft(void *arg)
{
struct com_softc *sc = (struct com_softc *)arg;
struct tty *tp;
u_char *ibufp;
u_char *ibufend;
int c;
int s;
static int lsrmap[8] = {
0, TTY_PE,
TTY_FE, TTY_PE|TTY_FE,
TTY_FE, TTY_PE|TTY_FE,
TTY_FE, TTY_PE|TTY_FE
};
if (sc == NULL || sc->sc_ibufp == sc->sc_ibuf)
goto out;
tp = sc->sc_tty;
s = spltty();
ibufp = sc->sc_ibuf;
ibufend = sc->sc_ibufp;
if (ibufp == ibufend) {
splx(s);
goto out;
}
sc->sc_ibufp = sc->sc_ibuf = (ibufp == sc->sc_ibufs[0]) ?
sc->sc_ibufs[1] : sc->sc_ibufs[0];
sc->sc_ibufhigh = sc->sc_ibuf + COM_IHIGHWATER;
sc->sc_ibufend = sc->sc_ibuf + COM_IBUFSIZE;
if (tp == NULL || !ISSET(tp->t_state, TS_ISOPEN)) {
splx(s);
goto out;
}
if (ISSET(tp->t_cflag, CRTSCTS) &&
!ISSET(sc->sc_mcr, MCR_RTS)) {
/* XXX */
SET(sc->sc_mcr, MCR_RTS);
bus_space_write_1(sc->sc_iot, sc->sc_ioh, com_mcr,
sc->sc_mcr);
}
splx(s);
while (ibufp < ibufend) {
c = *ibufp++;
if (ISSET(*ibufp, LSR_OE)) {
sc->sc_overflows++;
if (sc->sc_errors++ == 0)
timeout_add(&sc->sc_diag_tmo, 60 * hz);
}
/* This is ugly, but fast. */
c |= lsrmap[(*ibufp++ & (LSR_BI|LSR_FE|LSR_PE)) >> 2];
(*linesw[tp->t_line].l_rint)(c, tp);
}
out:
#ifndef __HAVE_GENERIC_SOFT_INTERRUPTS
timeout_add(&sc->sc_comsoft_tmo, 1);
#else
;
#endif
}
#ifdef KGDB
/*
* If a line break is set, or data matches one of the characters
* gdb uses to signal a connection, then start up kgdb. Just gobble
* any other data. Done in a stand alone function because comintr
* does tty stuff and we don't have one.
*/
int
kgdbintr(void *arg)
{
struct com_softc *sc = arg;
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
u_char lsr, data, msr, delta;
if (!ISSET(sc->sc_hwflags, COM_HW_KGDB))
return(0);
for (;;) {
lsr = bus_space_read_1(iot, ioh, com_lsr);
if (ISSET(lsr, LSR_RXRDY)) {
do {
data = bus_space_read_1(iot, ioh, com_data);
if (data == 3 || data == '$' || data == '+' ||
ISSET(lsr, LSR_BI)) {
kgdb_connect(1);
data = 0;
}
lsr = bus_space_read_1(iot, ioh, com_lsr);
} while (ISSET(lsr, LSR_RXRDY));
}
if (ISSET(lsr, LSR_BI|LSR_FE|LSR_PE|LSR_OE))
printf("weird lsr %02x\n", lsr);
msr = bus_space_read_1(iot, ioh, com_msr);
if (msr != sc->sc_msr) {
delta = msr ^ sc->sc_msr;
sc->sc_msr = msr;
if (ISSET(delta, MSR_DCD)) {
if (!ISSET(sc->sc_swflags, COM_SW_SOFTCAR)) {
CLR(sc->sc_mcr, sc->sc_dtr);
bus_space_write_1(iot, ioh, com_mcr, sc->sc_mcr);
}
}
}
if (ISSET(bus_space_read_1(iot, ioh, com_iir), IIR_NOPEND))
return (1);
}
}
#endif /* KGDB */
int
comintr(void *arg)
{
struct com_softc *sc = arg;
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
struct tty *tp;
u_char lsr, data, msr, delta;
if (!sc->sc_tty)
return (0); /* can't do squat. */
if (ISSET(bus_space_read_1(iot, ioh, com_iir), IIR_NOPEND))
return (0);
tp = sc->sc_tty;
for (;;) {
lsr = bus_space_read_1(iot, ioh, com_lsr);
if (ISSET(lsr, LSR_RXRDY)) {
u_char *p = sc->sc_ibufp;
#ifdef __HAVE_GENERIC_SOFT_INTERRUPTS
softintr_schedule(sc->sc_si);
#endif
do {
data = bus_space_read_1(iot, ioh, com_data);
if (ISSET(lsr, LSR_BI)) {
#if defined(COM_CONSOLE) && defined(DDB)
if (ISSET(sc->sc_hwflags,
COM_HW_CONSOLE)) {
if (db_console)
Debugger();
goto next;
}
#endif
data = 0;
}
if (p >= sc->sc_ibufend) {
sc->sc_floods++;
if (sc->sc_errors++ == 0)
timeout_add(&sc->sc_diag_tmo, 60 * hz);
} else {
*p++ = data;
*p++ = lsr;
if (p == sc->sc_ibufhigh &&
ISSET(tp->t_cflag, CRTSCTS)) {
/* XXX */
CLR(sc->sc_mcr, MCR_RTS);
bus_space_write_1(iot, ioh, com_mcr,
sc->sc_mcr);
}
}
#if defined(COM_CONSOLE) && defined(DDB)
next:
#endif
lsr = bus_space_read_1(iot, ioh, com_lsr);
} while (ISSET(lsr, LSR_RXRDY));
sc->sc_ibufp = p;
}
msr = bus_space_read_1(iot, ioh, com_msr);
if (msr != sc->sc_msr) {
delta = msr ^ sc->sc_msr;
ttytstamp(tp, sc->sc_msr & MSR_CTS, msr & MSR_CTS,
sc->sc_msr & MSR_DCD, msr & MSR_DCD);
sc->sc_msr = msr;
if (ISSET(delta, MSR_DCD)) {
if (!ISSET(sc->sc_swflags, COM_SW_SOFTCAR) &&
(*linesw[tp->t_line].l_modem)(tp, ISSET(msr, MSR_DCD)) == 0) {
CLR(sc->sc_mcr, sc->sc_dtr);
bus_space_write_1(iot, ioh, com_mcr, sc->sc_mcr);
}
}
if (ISSET(delta & msr, MSR_CTS) &&
ISSET(tp->t_cflag, CRTSCTS)) {
/* the line is up and we want to do rts/cts flow control */
(*linesw[tp->t_line].l_start)(tp);
}
}
if (ISSET(lsr, LSR_TXRDY) && ISSET(tp->t_state, TS_BUSY)) {
CLR(tp->t_state, TS_BUSY | TS_FLUSH);
if (sc->sc_halt > 0)
wakeup(&tp->t_outq);
(*linesw[tp->t_line].l_start)(tp);
}
#ifdef COM_PXA2X0
if (sc->sc_uarttype == COM_UART_PXA2X0 &&
ISSET(sc->sc_hwflags, COM_HW_SIR) &&
ISSET(lsr, LSR_TXRDY) && ISSET(lsr, LSR_TSRE))
bus_space_write_1(iot, ioh, com_isr, ISR_RECV);
#endif
if (ISSET(bus_space_read_1(iot, ioh, com_iir), IIR_NOPEND))
return (1);
}
}
/*
* Following are all routines needed for COM to act as console
*/
#if defined(__sgi__)
#undef CONADDR
#undef COM_FREQ
#include <machine/autoconf.h>
#endif
/*
* The following functions are polled getc and putc routines, shared
* by the console and kgdb glue.
*/
int
com_common_getc(bus_space_tag_t iot, bus_space_handle_t ioh)
{
int s = splhigh();
u_char stat, c;
#ifdef COM_PXA2X0
if (com_is_console(iot, comsiraddr))
bus_space_write_1(iot, ioh, com_isr, ISR_RECV);
#endif
/* block until a character becomes available */
while (!ISSET(stat = bus_space_read_1(iot, ioh, com_lsr), LSR_RXRDY))
continue;
c = bus_space_read_1(iot, ioh, com_data);
/* clear any interrupts generated by this transmission */
stat = bus_space_read_1(iot, ioh, com_iir);
splx(s);
return (c);
}
void
com_common_putc(bus_space_tag_t iot, bus_space_handle_t ioh, int c)
{
int s = spltty();
int timo;
printf("com_common_putc: enter\n");
/* wait for any pending transmission to finish */
timo = 2000;
while (!ISSET(bus_space_read_1(iot, ioh, com_lsr), LSR_TXRDY) && --timo)
delay(1);
#ifdef COM_PXA2X0
if (com_is_console(iot, comsiraddr))
bus_space_write_1(iot, ioh, com_isr, ISR_SEND);
#endif
bus_space_write_1(iot, ioh, com_data, (u_int8_t)(c & 0xff));
bus_space_barrier(iot, ioh, 0, COM_NPORTS,
(BUS_SPACE_BARRIER_READ|BUS_SPACE_BARRIER_WRITE));
printf("com_common_putc: wait for TXRDY\n");
/* wait for this transmission to complete */
timo = 2000;
while (!ISSET(bus_space_read_1(iot, ioh, com_lsr), LSR_TXRDY) && --timo)
delay(1);
#ifdef COM_PXA2X0
if (com_is_console(iot, comsiraddr)) {
/* wait for transmit shift register to become empty */
timo = 20000;
while (!ISSET(bus_space_read_1(iot, ioh, com_lsr), LSR_TSRE)
&& --timo)
delay(1);
bus_space_write_1(iot, ioh, com_isr, ISR_RECV);
}
#endif
splx(s);
}
void
cominit(bus_space_tag_t iot, bus_space_handle_t ioh, int rate, int frequency)
{
int s = splhigh();
u_char stat;
bus_space_write_1(iot, ioh, com_lcr, LCR_DLAB);
rate = comspeed(frequency, rate); /* XXX not comdefaultrate? */
bus_space_write_1(iot, ioh, com_dlbl, rate);
bus_space_write_1(iot, ioh, com_dlbh, rate >> 8);
bus_space_write_1(iot, ioh, com_lcr, LCR_8BITS);
bus_space_write_1(iot, ioh, com_mcr, MCR_DTR | MCR_RTS);
#ifdef COM_PXA2X0
/* XXX */
bus_space_write_1(iot, ioh, com_ier, IER_EUART); /* Make sure they are off */
#else
bus_space_write_1(iot, ioh, com_ier, 0); /* Make sure they are off */
#endif
bus_space_write_1(iot, ioh, com_fifo,
FIFO_ENABLE | FIFO_RCV_RST | FIFO_XMT_RST | FIFO_TRIGGER_1);
stat = bus_space_read_1(iot, ioh, com_iir);
splx(s);
}
#ifdef COM_CONSOLE
void
comcnprobe(struct consdev *cp)
{
/* XXX NEEDS TO BE FIXED XXX */
#ifdef MD_ISA_IOT
bus_space_tag_t iot = MD_ISA_IOT;
#elif defined(__sgi__)
bus_space_tag_t iot = sys_config.cons_iot;
#else
bus_space_tag_t iot = 0;
#endif
bus_space_handle_t ioh;
int found;
if (CONADDR == 0)
return;
comconsiot = iot;
if (bus_space_map(iot, CONADDR, COM_NPORTS, 0, &ioh))
return;
found = comprobe1(iot, ioh);
bus_space_unmap(iot, ioh, COM_NPORTS);
if (!found)
return;
/* locate the major number */
for (commajor = 0; commajor < nchrdev; commajor++)
if (cdevsw[commajor].d_open == comopen)
break;
/* initialize required fields */
cp->cn_dev = makedev(commajor, CONUNIT);
#if defined(COMCONSOLE) || defined(PCCOMCONSOLE) || !defined(__amd64__)
cp->cn_pri = CN_REMOTE;
#else
cp->cn_pri = CN_NORMAL;
#endif
}
void
comcninit(struct consdev *cp)
{
comconsaddr = CONADDR;
if (bus_space_map(comconsiot, comconsaddr, COM_NPORTS, 0, &comconsioh))
panic("comcninit: mapping failed");
if (comconsfreq == 0)
comconsfreq = COM_FREQ;
cominit(comconsiot, comconsioh, comdefaultrate, comconsfreq);
comconsinit = 0;
}
int
comcnattach(bus_space_tag_t iot, bus_addr_t iobase, int rate, int frequency, tcflag_t cflag)
{
static struct consdev comcons = {
NULL, NULL, comcngetc, comcnputc, comcnpollc, NULL,
NODEV, CN_NORMAL
};
#ifndef __sparc64__
if (bus_space_map(iot, iobase, COM_NPORTS, 0, &comconsioh))
return ENOMEM;
#endif
cominit(iot, comconsioh, rate, frequency);
cn_tab = &comcons;
comconsiot = iot;
comconsaddr = iobase;
comconscflag = cflag;
comconsfreq = frequency;
return (0);
}
int
comcngetc(dev_t dev)
{
return (com_common_getc(comconsiot, comconsioh));
}
/*
* Console kernel output character routine.
*/
void
comcnputc(dev_t dev, int c)
{
com_common_putc(comconsiot, comconsioh, c);
}
void
comcnpollc(dev_t dev, int on)
{
}
#endif /* COM_CONSOLE */
#ifdef KGDB
int
com_kgdb_attach(bus_space_tag_t iot, bus_addr_t iobase, int rate,
int frequency,tcflag_t cflag)
bus_space_tag_t iot;
bus_addr_t iobase;
int rate, frequency;
tcflag_t cflag;
{
#ifdef COM_CONSOLE
if (iot == comconsiot && iobase == comconsaddr) {
return (EBUSY); /* cannot share with console */
}
#endif
com_kgdb_iot = iot;
com_kgdb_addr = iobase;
if (bus_space_map(com_kgdb_iot, com_kgdb_addr, COM_NPORTS, 0,
&com_kgdb_ioh))
panic("com_kgdb_attach: mapping failed");
/* XXX We currently don't respect KGDBMODE? */
cominit(com_kgdb_iot, com_kgdb_ioh, rate, frequency);
kgdb_attach(com_kgdb_getc, com_kgdb_putc, NULL);
kgdb_dev = 123; /* unneeded, only to satisfy some tests */
return (0);
}
/* ARGSUSED */
int
com_kgdb_getc(void *arg)
{
return (com_common_getc(com_kgdb_iot, com_kgdb_ioh));
}
/* ARGSUSED */
void
com_kgdb_putc(void *arg, int c)
{
return (com_common_putc(com_kgdb_iot, com_kgdb_ioh, c));
}
#endif /* KGDB */
#ifdef COM_PXA2X0
int
com_is_console(bus_space_tag_t iot, bus_addr_t iobase)
{
if (comconsiot == iot && comconsaddr == iobase)
return (1);
#ifdef KGDB
else if (com_kgdb_iot == iot && com_kgdb_addr == iobase)
return (1);
#endif
return (0);
}
#endif