File: [local] / sys / dev / ic / lsi64854var.h (download)
Revision 1.1.1.1 (vendor branch), Tue Mar 4 16:10:42 2008 UTC (16 years, 6 months ago) by nbrk
Branch: OPENBSD_4_2_BASE, MAIN
CVS Tags: jornada-partial-support-wip, HEAD Changes since 1.1: +0 -0 lines
Import of OpenBSD 4.2 release kernel tree with initial code to support
Jornada 720/728, StrongARM 1110-based handheld PC.
At this point kernel roots on NFS and boots into vfs_mountroot() and traps.
What is supported:
- glass console, Jornada framebuffer (jfb) works in 16bpp direct color mode
(needs some palette tweaks for non black/white/blue colors, i think)
- saic, SA11x0 interrupt controller (needs cleanup)
- sacom, SA11x0 UART (supported only as boot console for now)
- SA11x0 GPIO controller fully supported (but can't handle multiple interrupt
handlers on one gpio pin)
- sassp, SSP port on SA11x0 that attaches spibus
- Jornada microcontroller (jmcu) to control kbd, battery, etc throught
the SPI bus (wskbd attaches on jmcu, but not tested)
- tod functions seem work
- initial code for SA-1111 (chip companion) : this is TODO
Next important steps, i think:
- gpio and intc on sa1111
- pcmcia support for sa11x0 (and sa1111 help logic)
- REAL root on nfs when we have PCMCIA support (we may use any of supported pccard NICs)
- root on wd0! (using already supported PCMCIA-ATA)
|
/* $OpenBSD: lsi64854var.h,v 1.6 2007/02/28 18:48:35 miod Exp $ */
/* $NetBSD: lsi64854var.h,v 1.4 2001/03/29 02:58:39 petrov Exp $ */
/*-
* Copyright (c) 1998 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Paul Kranenburg.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the NetBSD
* Foundation, Inc. and its contributors.
* 4. Neither the name of The NetBSD Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
struct lsi64854_softc {
struct device sc_dev; /* base device */
bus_space_tag_t sc_bustag; /* bus tags */
bus_dma_tag_t sc_dmatag;
bus_space_handle_t sc_regs; /* the registers */
u_int sc_rev; /* revision */
int sc_burst; /* max supported burst size */
int sc_channel;
#define L64854_CHANNEL_SCSI 1
#define L64854_CHANNEL_ENET 2
#define L64854_CHANNEL_PP 3
void *sc_client;
int sc_active; /* DMA active ? */
bus_dmamap_t sc_dmamap; /* DMA map for bus_dma_* */
caddr_t sc_dvmaaddr; /* DVMA cookie */
size_t sc_dmasize;
caddr_t *sc_dmaaddr;
size_t *sc_dmalen;
void (*reset)(struct lsi64854_softc *);/* reset routine */
int (*setup)(struct lsi64854_softc *, caddr_t *, size_t *,
int, size_t *); /* dma setup */
int (*intr)(void *); /* interrupt handler */
int (*sc_intrchain)(void *); /* next handler in intr chain */
void *sc_intrchainarg; /* arg for next intr handler */
u_int sc_dmactl;
};
#define L64854_GCSR(sc) \
(bus_space_read_4((sc)->sc_bustag, (sc)->sc_regs, L64854_REG_CSR))
#define L64854_SCSR(sc, csr) \
bus_space_write_4((sc)->sc_bustag, (sc)->sc_regs, L64854_REG_CSR, csr)
/*
* DMA engine interface functions.
*/
#define DMA_RESET(sc) (((sc)->reset)(sc))
#define DMA_INTR(sc) (((sc)->intr)(sc))
#define DMA_SETUP(sc, a, l, d, s) (((sc)->setup)(sc, a, l, d, s))
#define DMA_ISACTIVE(sc) ((sc)->sc_active)
#define DMA_ENINTR(sc) do { \
u_int32_t csr = L64854_GCSR(sc); \
csr |= L64854_INT_EN; \
L64854_SCSR(sc, csr); \
} while (0)
#define DMA_ISINTR(sc) (L64854_GCSR(sc) & (D_INT_PEND|D_ERR_PEND))
#define DMA_GO(sc) do { \
u_int32_t csr = L64854_GCSR(sc); \
csr |= D_EN_DMA; \
L64854_SCSR(sc, csr); \
sc->sc_active = 1; \
} while (0)
int lsi64854_attach(struct lsi64854_softc *);
int lsi64854_enet_intr(void *);