Annotation of sys/dev/pci/bktr/bktr_card.c, Revision 1.1
1.1 ! nbrk 1: /* $OpenBSD: bktr_card.c,v 1.15 2007/06/11 08:10:22 robert Exp $ */
! 2: /* $FreeBSD: src/sys/dev/bktr/bktr_card.c,v 1.16 2000/10/31 13:09:56 roger Exp $ */
! 3:
! 4: /*
! 5: * This is part of the Driver for Video Capture Cards (Frame grabbers)
! 6: * and TV Tuner cards using the Brooktree Bt848, Bt848A, Bt849A, Bt878, Bt879
! 7: * chipset.
! 8: * Copyright Roger Hardiman and Amancio Hasty.
! 9: *
! 10: * bktr_card : This deals with identifying TV cards.
! 11: * trying to find the card make and model of card.
! 12: * trying to find the type of tuner fitted.
! 13: * reading the configuration EEPROM.
! 14: * locating i2c devices.
! 15: *
! 16: */
! 17:
! 18: /*
! 19: * 1. Redistributions of source code must retain the
! 20: * Copyright (c) 1997 Amancio Hasty, 1999 Roger Hardiman
! 21: * All rights reserved.
! 22: *
! 23: * Redistribution and use in source and binary forms, with or without
! 24: * modification, are permitted provided that the following conditions
! 25: * are met:
! 26: * 1. Redistributions of source code must retain the above copyright
! 27: * notice, this list of conditions and the following disclaimer.
! 28: * 2. Redistributions in binary form must reproduce the above copyright
! 29: * notice, this list of conditions and the following disclaimer in the
! 30: * documentation and/or other materials provided with the distribution.
! 31: * 3. All advertising materials mentioning features or use of this software
! 32: * must display the following acknowledgement:
! 33: * This product includes software developed by Amancio Hasty and
! 34: * Roger Hardiman
! 35: * 4. The name of the author may not be used to endorse or promote products
! 36: * derived from this software without specific prior written permission.
! 37: *
! 38: * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
! 39: * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
! 40: * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
! 41: * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
! 42: * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
! 43: * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
! 44: * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
! 45: * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
! 46: * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
! 47: * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
! 48: * POSSIBILITY OF SUCH DAMAGE.
! 49: */
! 50:
! 51: #include <sys/param.h>
! 52: #include <sys/systm.h>
! 53: #include <sys/vnode.h>
! 54:
! 55: #include <dev/ic/bt8xx.h> /* OpenBSD location for .h files */
! 56: #include <dev/pci/bktr/bktr_reg.h>
! 57: #include <dev/pci/bktr/bktr_core.h>
! 58: #include <dev/pci/bktr/bktr_tuner.h>
! 59: #include <dev/pci/bktr/bktr_card.h>
! 60: #include <dev/pci/bktr/bktr_audio.h>
! 61:
! 62: /* Include the PCI Vendor definitions */
! 63: #include <dev/pci/pcidevs.h>
! 64: #include <dev/pci/pcireg.h>
! 65:
! 66: /* Various defines */
! 67: #define HAUP_REMOTE_INT_WADDR 0x30
! 68: #define HAUP_REMOTE_INT_RADDR 0x31
! 69:
! 70: #define HAUP_REMOTE_EXT_WADDR 0x34
! 71: #define HAUP_REMOTE_EXT_RADDR 0x35
! 72:
! 73: /* address of BTSC/SAP decoder chip */
! 74: #define TDA9850_WADDR 0xb6
! 75: #define TDA9850_RADDR 0xb7
! 76:
! 77: /* address of MSP3400C chip */
! 78: #define MSP3400C_WADDR 0x80
! 79: #define MSP3400C_RADDR 0x81
! 80:
! 81: /* address of DPL3518A chip */
! 82: #define DPL3518A_WADDR 0x84
! 83: #define DPL3518A_RADDR 0x85
! 84:
! 85: /* EEProm (128 * 8) on an STB card */
! 86: #define X24C01_WADDR 0xae
! 87: #define X24C01_RADDR 0xaf
! 88:
! 89: /* EEProm (256 * 8) on a Hauppauge card */
! 90: /* and on most BT878s cards to store the sub-system vendor id */
! 91: #define PFC8582_WADDR 0xa0
! 92: #define PFC8582_RADDR 0xa1
! 93:
! 94: #if BKTR_SYSTEM_DEFAULT == BROOKTREE_PAL
! 95: #define DEFAULT_TUNER PHILIPS_PALI
! 96: #else
! 97: #define DEFAULT_TUNER PHILIPS_NTSC
! 98: #endif
! 99:
! 100:
! 101:
! 102:
! 103: /*
! 104: * the data for each type of card
! 105: *
! 106: * Note:
! 107: * these entried MUST be kept in the order defined by the CARD_XXX defines!
! 108: */
! 109: static const struct CARDTYPE cards[] = {
! 110:
! 111: { CARD_UNKNOWN, /* the card id */
! 112: "Unknown", /* the 'name' */
! 113: NULL, /* the tuner */
! 114: 0, /* the tuner i2c address */
! 115: 0, /* dbx unknown */
! 116: 0,
! 117: 0,
! 118: 0, /* EEProm unknown */
! 119: 0, /* EEProm unknown */
! 120: { 0, 0, 0, 0, 0 },
! 121: 0 }, /* GPIO mask */
! 122:
! 123: { CARD_MIRO, /* the card id */
! 124: "Pinnacle/Miro TV", /* the 'name' */
! 125: NULL, /* the tuner */
! 126: 0, /* the tuner i2c address */
! 127: 0, /* dbx unknown */
! 128: 0,
! 129: 0,
! 130: 0, /* EEProm unknown */
! 131: 0, /* size unknown */
! 132: { 0x02, 0x01, 0x00, 0x0a, 1 }, /* audio MUX values */
! 133: 0x0f }, /* GPIO mask */
! 134:
! 135: { CARD_HAUPPAUGE, /* the card id */
! 136: "Hauppauge WinCast/TV", /* the 'name' */
! 137: NULL, /* the tuner */
! 138: 0, /* the tuner i2c address */
! 139: 0, /* dbx is optional */
! 140: 0,
! 141: 0,
! 142: PFC8582_WADDR, /* EEProm type */
! 143: (u_char)(256 / EEPROMBLOCKSIZE), /* 256 bytes */
! 144: { 0x00, 0x02, 0x01, 0x04, 1 }, /* audio MUX values */
! 145: 0x0f }, /* GPIO mask */
! 146:
! 147: { CARD_STB, /* the card id */
! 148: "STB TV/PCI", /* the 'name' */
! 149: NULL, /* the tuner */
! 150: 0, /* the tuner i2c address */
! 151: 0, /* dbx is optional */
! 152: 0,
! 153: 0,
! 154: X24C01_WADDR, /* EEProm type */
! 155: (u_char)(128 / EEPROMBLOCKSIZE), /* 128 bytes */
! 156: { 0x00, 0x01, 0x02, 0x02, 1 }, /* audio MUX values */
! 157: 0x0f }, /* GPIO mask */
! 158:
! 159: { CARD_INTEL, /* the card id */
! 160: "Intel Smart Video III/VideoLogic Captivator PCI", /* the 'name' */
! 161: NULL, /* the tuner */
! 162: 0, /* the tuner i2c address */
! 163: 0,
! 164: 0,
! 165: 0,
! 166: 0,
! 167: 0,
! 168: { 0, 0, 0, 0, 0 }, /* audio MUX values */
! 169: 0x00 }, /* GPIO mask */
! 170:
! 171: { CARD_IMS_TURBO, /* the card id */
! 172: "IMS TV Turbo", /* the 'name' */
! 173: NULL, /* the tuner */
! 174: 0, /* the tuner i2c address */
! 175: 0, /* dbx is optional */
! 176: 0,
! 177: 0,
! 178: PFC8582_WADDR, /* EEProm type */
! 179: (u_char)(256 / EEPROMBLOCKSIZE), /* 256 bytes */
! 180: { 0x01, 0x02, 0x01, 0x00, 1 }, /* audio MUX values */
! 181: 0x0f }, /* GPIO mask */
! 182:
! 183: { CARD_AVER_MEDIA, /* the card id */
! 184: "AVer Media TV/FM", /* the 'name' */
! 185: NULL, /* the tuner */
! 186: 0, /* the tuner i2c address */
! 187: 0, /* dbx is optional */
! 188: 0,
! 189: 0,
! 190: 0, /* EEProm type */
! 191: 0, /* EEProm size */
! 192: { 0x0c, 0x08, 0x04, 0x00, 1 }, /* audio MUX values */
! 193: 0x1f }, /* GPIO mask */
! 194:
! 195: { CARD_OSPREY, /* the card id */
! 196: "MMAC Osprey", /* the 'name' */
! 197: NULL, /* the tuner */
! 198: 0, /* the tuner i2c address */
! 199: 0, /* dbx is optional */
! 200: 0,
! 201: 0,
! 202: PFC8582_WADDR, /* EEProm type */
! 203: (u_char)(256 / EEPROMBLOCKSIZE), /* 256 bytes */
! 204: { 0x00, 0x00, 0x00, 0x00, 0 }, /* audio MUX values */
! 205: 0 }, /* GPIO mask */
! 206:
! 207: { CARD_NEC_PK, /* the card id */
! 208: "NEC PK-UG-X017", /* the 'name' */
! 209: NULL, /* the tuner */
! 210: 0, /* the tuner i2c address */
! 211: 0, /* dbx is optional */
! 212: 0,
! 213: 0,
! 214: 0, /* EEProm type */
! 215: 0, /* EEProm size */
! 216: { 0x01, 0x02, 0x01, 0x00, 1 }, /* audio MUX values */
! 217: 0x0f }, /* GPIO mask */
! 218:
! 219: { CARD_IO_GV, /* the card id */
! 220: "I/O DATA GV-BCTV2/PCI", /* the 'name' */
! 221: NULL, /* the tuner */
! 222: 0, /* the tuner i2c address */
! 223: 0, /* dbx is optional */
! 224: 0,
! 225: 0,
! 226: 0, /* EEProm type */
! 227: 0, /* EEProm size */
! 228: { 0x00, 0x00, 0x00, 0x00, 1 }, /* Has special MUX handler */
! 229: 0x0f }, /* GPIO mask */
! 230:
! 231: { CARD_FLYVIDEO, /* the card id */
! 232: "FlyVideo", /* the 'name' */
! 233: NULL, /* the tuner */
! 234: 0, /* the tuner i2c address */
! 235: 0, /* dbx is optional */
! 236: 0, /* msp34xx is optional */
! 237: 0, /* dpl3518a is optional */
! 238: 0xac, /* EEProm type */
! 239: (u_char)(256 / EEPROMBLOCKSIZE), /* 256 bytes */
! 240: { 0x000, 0x800, 0x400, 0x8dff00, 1 },/* audio MUX values */
! 241: 0x8dff00 }, /* GPIO mask */
! 242:
! 243: { CARD_ZOLTRIX, /* the card id */
! 244: "Zoltrix", /* the 'name' */
! 245: NULL, /* the tuner */
! 246: 0, /* the tuner i2c address */
! 247: 0, /* dbx is optional */
! 248: 0, /* msp34xx is optional */
! 249: 0, /* dpl3518a is optional */
! 250: 0, /* EEProm type */
! 251: 0, /* EEProm size */
! 252: { 0x04, 0x01, 0x00, 0x0a, 1 }, /* audio MUX values */
! 253: 0x0f }, /* GPIO mask */
! 254:
! 255: { CARD_KISS, /* the card id */
! 256: "KISS TV/FM PCI", /* the 'name' */
! 257: NULL, /* the tuner */
! 258: 0, /* the tuner i2c address */
! 259: 0, /* dbx is optional */
! 260: 0, /* msp34xx is optional */
! 261: 0, /* dpl3518a is optional */
! 262: 0, /* EEProm type */
! 263: 0, /* EEProm size */
! 264: { 0x0c, 0x00, 0x0b, 0x0b, 1 }, /* audio MUX values */
! 265: 0x0f }, /* GPIO mask */
! 266:
! 267: { CARD_VIDEO_HIGHWAY_XTREME, /* the card id */
! 268: "Video Highway Xtreme", /* the 'name' */
! 269: NULL, /* the tuner */
! 270: 0,
! 271: 0,
! 272: 0,
! 273: 0,
! 274: 0, /* EEProm type */
! 275: 0, /* EEProm size */
! 276: { 0x00, 0x02, 0x01, 0x04, 1 }, /* audio MUX values */
! 277: 0x0f }, /* GPIO mask */
! 278:
! 279: { CARD_ASKEY_DYNALINK_MAGIC_TVIEW, /* the card id */
! 280: "Askey/Dynalink Magic TView", /* the 'name' */
! 281: NULL, /* the tuner */
! 282: 0,
! 283: 0,
! 284: 0,
! 285: 0,
! 286: 0, /* EEProm type */
! 287: 0, /* EEProm size */
! 288: { 0x400, 0xE00, 0x400, 0xC00, 1 }, /* audio MUX values */
! 289: 0xE00 }, /* GPIO mask */
! 290:
! 291: { CARD_LEADTEK, /* the card id */
! 292: "Leadtek WinFast TV 2000", /* the 'name' */
! 293: NULL, /* the tuner */
! 294: 0,
! 295: 0,
! 296: 0,
! 297: 0,
! 298: 0, /* EEProm type */
! 299: 0, /* EEProm size */
! 300: /* Tuner, Extern, Intern, Mute, Enabled */
! 301: { 0x621000, 0x621000, 0x621000, 0xE21000, 1 }, /* audio MUX values */
! 302: 0xfff000 }, /* GPIO mask */
! 303:
! 304: { CARD_TERRATVPLUS, /* the card id */
! 305: "TerraTVplus", /* the 'name' */
! 306: NULL, /* the tuner */
! 307: 0,
! 308: 0,
! 309: 0,
! 310: 0,
! 311: 0, /* EEProm type */
! 312: 0, /* EEProm size */
! 313: { 0x20000, 0x00000, 0x30000, 0x40000, 1 }, /* audio MUX values*/
! 314: 0x70000 }, /* GPIO mask */
! 315:
! 316: { CARD_TVWONDER, /* the card id */
! 317: "ATI TV-Wonder/VE", /* the 'name' */
! 318: NULL, /* the tuner */
! 319: 0,
! 320: 0,
! 321: 0,
! 322: 0,
! 323: 0, /* EEProm type */
! 324: 0, /* EEProm size */
! 325: { 0x1002, 0x1002, 0x3003, 0x3003, 0x3003 }, /* audio MUX values*/
! 326: 0x300f }, /* GPIO mask */
! 327:
! 328: { CARD_IO_BCTV3, /* the card id */
! 329: "I/O DATA GV-BCTV3/PCI", /* the 'name' */
! 330: NULL, /* the tuner */
! 331: 0, /* the tuner i2c address */
! 332: 0, /* dbx is optional */
! 333: 0,
! 334: 0,
! 335: 0, /* EEProm type */
! 336: 0, /* EEProm size */
! 337: /* Tuner, Extern, Intern, Mute, Enabled */
! 338: { 0x10000, 0, 0x10000, 0, 1 }, /* audio MUX values */
! 339: 0x10f00 }, /* GPIO mask */
! 340:
! 341: { CARD_AOPEN_VA1000, /* the card id */
! 342: "AOpen VA1000", /* the 'name' */
! 343: NULL, /* the tuner */
! 344: 0, /* the tuner i2c address */
! 345: 0, /* dbx is optional */
! 346: 0,
! 347: 0,
! 348: 0, /* EEProm unknown */
! 349: 0, /* size unknown */
! 350: { 0x02, 0x00, 0x00, 0x00, 1 }, /* audio MUX values */
! 351: 0x18e0 }, /* GPIO mask */
! 352:
! 353: { CARD_ZOLTRIX_GENIE_FM, /* the card id */
! 354: "Zoltrix Genie TV/FM", /* the 'name' */
! 355: NULL, /* the tuner */
! 356: 0, /* the tuner i2c address */
! 357: 0, /* dbx is optional */
! 358: 0, /* msp34xx is optional */
! 359: 0, /* dpl3518a is optional */
! 360: 0, /* EEProm type */
! 361: 0, /* EEProm size */
! 362: { 0xbc803f, 0xbcb03f, 0xbc903f, 0x0, 1 }, /* audio MUX values*/
! 363: 0xbcf03f }, /* GPIO mask */
! 364:
! 365: { CARD_LEADTEK_XP, /* the card id */
! 366: "Leadtek WinFast TV 2000 XP", /* the 'name' */
! 367: NULL, /* the tuner */
! 368: 0, /* the tuner i2c address */
! 369: 0, /* dbx is optional */
! 370: 0, /* msp34xx is optional */
! 371: 0, /* dpl3518a is optional */
! 372: 0, /* EEProm type */
! 373: 0, /* EEProm size */
! 374: { 0x122000, 0x1000, 0x620000, 0x0, 1 }, /* audio MUX values*/
! 375: 0xb3300 }, /* GPIO mask */
! 376: };
! 377:
! 378: struct bt848_card_sig bt848_card_signature[1]= {
! 379: /* IMS TURBO TV : card 5 */
! 380: { 5,9, {00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 02, 00, 00, 00}}
! 381: };
! 382:
! 383:
! 384: /*
! 385: * Write to the configuration EEPROM on the card.
! 386: * This is dangerous and will mess up your card. Therefore it is not
! 387: * implemented.
! 388: */
! 389: int
! 390: writeEEProm( bktr_ptr_t bktr, int offset, int count, u_char *data )
! 391: {
! 392: return( -1 );
! 393: }
! 394:
! 395: /*
! 396: * Read the contents of the configuration EEPROM on the card.
! 397: * (This is not fitted to all makes of card. All Hauppauge cards have them
! 398: * and so do newer Bt878 based cards.
! 399: */
! 400: int
! 401: readEEProm(bktr_ptr_t bktr, int offset, int count, u_char *data)
! 402: {
! 403: int x;
! 404: int addr;
! 405: int max;
! 406: int byte;
! 407:
! 408: /* get the address of the EEProm */
! 409: addr = (int)(bktr->card.eepromAddr & 0xff);
! 410: if ( addr == 0 )
! 411: return( -1 );
! 412:
! 413: max = (int)(bktr->card.eepromSize * EEPROMBLOCKSIZE);
! 414: if ( (offset + count) > max )
! 415: return( -1 );
! 416:
! 417: /* set the start address */
! 418: if ( i2cWrite( bktr, addr, offset, -1 ) == -1 )
! 419: return( -1 );
! 420:
! 421: /* the read cycle */
! 422: for ( x = 0; x < count; ++x ) {
! 423: if ( (byte = i2cRead( bktr, (addr | 1) )) == -1 )
! 424: return( -1 );
! 425: data[ x ] = byte;
! 426: }
! 427:
! 428: return( 0 );
! 429: }
! 430:
! 431:
! 432: #define ABSENT (-1)
! 433:
! 434: /*
! 435: * get a signature of the card
! 436: * read all 128 possible i2c read addresses from 0x01 thru 0xff
! 437: * build a bit array with a 1 bit for each i2c device that responds
! 438: *
! 439: * XXX FIXME: use offset & count args
! 440: */
! 441: int
! 442: signCard( bktr_ptr_t bktr, int offset, int count, u_char *sig )
! 443: {
! 444: int x;
! 445:
! 446: for ( x = 0; x < 16; ++x )
! 447: sig[ x ] = 0;
! 448:
! 449: for ( x = 0; x < count; ++x ) {
! 450: if ( i2cRead( bktr, (2 * x) + 1 ) != ABSENT ) {
! 451: sig[ x / 8 ] |= (1 << (x % 8) );
! 452: }
! 453: }
! 454:
! 455: return( 0 );
! 456: }
! 457:
! 458:
! 459: /*
! 460: * check_for_i2c_devices.
! 461: * Some BT848 cards have no tuner and no additional i2c devices
! 462: * eg stereo decoder. These are used for video conferencing or capture from
! 463: * a video camera. (eg VideoLogic Captivator PCI, Intel SmartCapture card).
! 464: *
! 465: * Determine if there are any i2c devices present. There are none present if
! 466: * a) reading from all 128 devices returns ABSENT (-1) for each one
! 467: * (eg VideoLogic Captivator PCI with BT848)
! 468: * b) reading from all 128 devices returns 0 for each one
! 469: * (eg VideoLogic Captivator PCI rev. 2F with BT848A)
! 470: */
! 471: static int check_for_i2c_devices( bktr_ptr_t bktr ){
! 472: int x, temp_read;
! 473: int i2c_all_0 = 1;
! 474: int i2c_all_absent = 1;
! 475: for ( x = 0; x < 128; ++x ) {
! 476: temp_read = i2cRead( bktr, (2 * x) + 1 );
! 477: if (temp_read != 0) i2c_all_0 = 0;
! 478: if (temp_read != ABSENT) i2c_all_absent = 0;
! 479: }
! 480:
! 481: if ((i2c_all_0) || (i2c_all_absent)) return 0;
! 482: else return 1;
! 483: }
! 484:
! 485:
! 486: /*
! 487: * Temic/Philips datasheets say tuners can be at i2c addresses 0xc0, 0xc2,
! 488: * 0xc4 or 0xc6, settable by links on the tuner.
! 489: * Determine the actual address used on the TV card by probing read addresses.
! 490: */
! 491: static int locate_tuner_address( bktr_ptr_t bktr) {
! 492: if (i2cRead( bktr, 0xc1) != ABSENT) return 0xc0;
! 493: if (i2cRead( bktr, 0xc3) != ABSENT) return 0xc2;
! 494: if (i2cRead( bktr, 0xc5) != ABSENT) return 0xc4;
! 495: if (i2cRead( bktr, 0xc7) != ABSENT) return 0xc6;
! 496: return -1; /* no tuner found */
! 497: }
! 498:
! 499:
! 500: /*
! 501: * Search for a configuration EEPROM on the i2c bus by looking at i2c addresses
! 502: * where EEPROMs are usually found.
! 503: * On some cards, the EEPROM appears in several locations, but all in the
! 504: * range 0xa0 to 0xae.
! 505: */
! 506: static int locate_eeprom_address( bktr_ptr_t bktr) {
! 507: if (i2cRead(bktr, 0xa0) != ABSENT) return 0xa0;
! 508: if (i2cRead(bktr, 0xac) != ABSENT) return 0xac;
! 509: if (i2cRead(bktr, 0xae) != ABSENT) return 0xae;
! 510: return -1; /* no eeprom found */
! 511: }
! 512:
! 513:
! 514: /*
! 515: * determine the card brand/model
! 516: * BKTR_OVERRIDE_CARD, BKTR_OVERRIDE_TUNER, BKTR_OVERRIDE_DBX and
! 517: * BKTR_OVERRIDE_MSP can be used to select a specific device,
! 518: * regardless of the autodetection and i2c device checks.
! 519: *
! 520: * The scheme used for probing cards faces these problems:
! 521: * It is impossible to work out which type of tuner is actually fitted,
! 522: * (the driver cannot tell if the Tuner is PAL or NTSC, Temic or Philips)
! 523: * It is impossible to determine what audio-mux hardware is connected.
! 524: * It is impossible to determine if there is extra hardware connected to the
! 525: * GPIO pins (eg radio chips or MSP34xx reset logic)
! 526: *
! 527: * However some makes of card (eg Hauppauge) come with a configuration eeprom
! 528: * which tells us the make of the card. Most eeproms also tell us the
! 529: * tuner type and other features of the cards.
! 530: *
! 531: * The current probe code works as follows
! 532: * A) If the card uses a Bt878/879:
! 533: * 1) Read the sub-system vendor id from the configuration EEPROM.
! 534: * Select the required tuner, audio mux arrangement and any other
! 535: * onboard features. If this fails, move to step B.
! 536: * B) If it card uses a Bt848, 848A, 849A or an unknown Bt878/879:
! 537: * 1) Look for I2C devices. If there are none fitted, it is an Intel or
! 538: * VideoLogic cards.
! 539: * 2) Look for a configuration EEPROM.
! 540: * 2a) If there is one at I2C address 0xa0 it may be
! 541: * a Hauppauge or an Osprey. Check the EEPROM contents to determine which
! 542: * one it is. For Hauppauge, select the tuner type and audio hardware.
! 543: * 2b) If there is an EEPROM at I2C address 0xa8 it will be an STB card.
! 544: * We still have to guess on the tuner type.
! 545: *
! 546: * C) If we do not know the card type from (A) or (B), guess at the tuner
! 547: * type based on the I2C address of the tuner.
! 548: *
! 549: * D) After determining the Tuner Type, we probe the i2c bus for other
! 550: * devices at known locations, eg IR-Remote Control, MSP34xx and TDA
! 551: * stereo chips.
! 552: */
! 553:
! 554:
! 555: /*
! 556: * These are the sub-system vendor ID codes stored in the
! 557: * configuration EEPROM used on Bt878/879 cards. They should match the
! 558: * number assigned to the company by the PCI Special Interest Group
! 559: */
! 560: /* Following not confirmed with http://members.hyperlink.net.au/~chart,
! 561: so not added to OpenBSD's pcidevs */
! 562: #define PCI_VENDOR_LEADTEK_ALT 0x6606 /* this is swapped w/ prod id */
! 563: #define PCI_VENDOR_LEADTEK_ALT_2 0x6607
! 564: #define PCI_VENDOR_LEADTEK_ALT_3 0x107d
! 565: #define PCI_VENDOR_FLYVIDEO 0x1851
! 566: #define PCI_VENDOR_FLYVIDEO_2 0x1852
! 567: #define PCI_VENDOR_PINNACLE_ALT 0xBD11 /* this is swapped w/ prod id */
! 568:
! 569: void
! 570: probeCard( bktr_ptr_t bktr, int verbose, int unit )
! 571: {
! 572: int card, i,j, card_found;
! 573: int status;
! 574: u_char probe_signature[128], *probe_temp;
! 575: int any_i2c_devices;
! 576: u_char eeprom[256];
! 577: int tuner_i2c_address = -1;
! 578: int eeprom_i2c_address = -1;
! 579:
! 580: /* Select all GPIO bits as inputs */
! 581: OUTL(bktr, BKTR_GPIO_OUT_EN, 0);
! 582: if (bootverbose)
! 583: printf("%s: GPIO is 0x%08x\n", bktr_name(bktr),
! 584: INL(bktr, BKTR_GPIO_DATA));
! 585:
! 586: #ifdef HAUPPAUGE_MSP_RESET
! 587: /* Reset the MSP34xx audio chip. This resolves bootup card
! 588: * detection problems with old Bt848 based Hauppauge cards with
! 589: * MSP34xx stereo audio chips. This must be user enabled because
! 590: * at this point the probe function does not know the card type. */
! 591: OUTL(bktr, BKTR_GPIO_OUT_EN, INL(bktr, BKTR_GPIO_OUT_EN) | (1<<5));
! 592: OUTL(bktr, BKTR_GPIO_DATA, INL(bktr, BKTR_GPIO_DATA) | (1<<5)); /* write '1' */
! 593: DELAY(2500); /* wait 2.5ms */
! 594: OUTL(bktr, BKTR_GPIO_DATA, INL(bktr, BKTR_GPIO_DATA) & ~(1<<5)); /* write '0' */
! 595: DELAY(2500); /* wait 2.5ms */
! 596: OUTL(bktr, BKTR_GPIO_DATA, INL(bktr, BKTR_GPIO_DATA) | (1<<5)); /* write '1' */
! 597: DELAY(2500); /* wait 2.5ms */
! 598: #endif
! 599:
! 600: /* Check for the presence of i2c devices */
! 601: any_i2c_devices = check_for_i2c_devices( bktr );
! 602:
! 603:
! 604: /* Check for a user specified override on the card selection */
! 605: #if defined( BKTR_OVERRIDE_CARD )
! 606: bktr->card = cards[ (card = BKTR_OVERRIDE_CARD) ];
! 607: goto checkEEPROM;
! 608: #endif
! 609: if (bktr->bt848_card != -1 ) {
! 610: bktr->card = cards[ (card = bktr->bt848_card) ];
! 611: goto checkEEPROM;
! 612: }
! 613:
! 614:
! 615: /* No override, so try and determine the make of the card */
! 616:
! 617: /* On BT878/879 cards, read the sub-system vendor id */
! 618: /* This identifies the manufacturer of the card and the model */
! 619: /* In theory this can be read from PCI registers but this does not */
! 620: /* appear to work on the FlyVideo 98. Hauppauge also warned that */
! 621: /* the PCI registers are sometimes not loaded correctly. */
! 622: /* Therefore, I will read the sub-system vendor ID from the EEPROM */
! 623: /* (just like the Bt878 does during power up initialisation) */
! 624:
! 625: if ((bktr->id==BROOKTREE_878) || (bktr->id==BROOKTREE_879)) {
! 626: /* Try and locate the EEPROM */
! 627: eeprom_i2c_address = locate_eeprom_address( bktr );
! 628: if (eeprom_i2c_address != -1) {
! 629:
! 630: unsigned int subsystem_vendor_id; /* vendors PCI-SIG ID */
! 631: unsigned int subsystem_id; /* board model number */
! 632: unsigned int byte_252, byte_253, byte_254, byte_255;
! 633:
! 634: bktr->card = cards[ (card = CARD_UNKNOWN) ];
! 635: bktr->card.eepromAddr = eeprom_i2c_address;
! 636: bktr->card.eepromSize = (u_char)(256 / EEPROMBLOCKSIZE);
! 637:
! 638: if (readEEProm(bktr, 0, 256, eeprom) && bootverbose)
! 639: printf("%s: error reading EEPROM\n", bktr_name(bktr));
! 640: byte_252 = (unsigned int)eeprom[252];
! 641: byte_253 = (unsigned int)eeprom[253];
! 642: byte_254 = (unsigned int)eeprom[254];
! 643: byte_255 = (unsigned int)eeprom[255];
! 644:
! 645: subsystem_id = (byte_252 << 8) | byte_253;
! 646: subsystem_vendor_id = (byte_254 << 8) | byte_255;
! 647:
! 648: if (bootverbose)
! 649: printf("%s: subsystem 0x%04x 0x%04x\n", bktr_name(bktr),
! 650: subsystem_vendor_id, subsystem_id);
! 651:
! 652: if (subsystem_vendor_id == PCI_VENDOR_AVERMEDIA) {
! 653: bktr->card = cards[ (card = CARD_AVER_MEDIA) ];
! 654: bktr->card.eepromAddr = eeprom_i2c_address;
! 655: bktr->card.eepromSize = (u_char)(256 / EEPROMBLOCKSIZE);
! 656: goto checkTuner;
! 657: }
! 658:
! 659: if (subsystem_vendor_id == PCI_VENDOR_HAUPPAUGE) {
! 660: bktr->card = cards[ (card = CARD_HAUPPAUGE) ];
! 661: bktr->card.eepromAddr = eeprom_i2c_address;
! 662: bktr->card.eepromSize = (u_char)(256 / EEPROMBLOCKSIZE);
! 663: goto checkTuner;
! 664: }
! 665:
! 666: if ((subsystem_vendor_id == PCI_VENDOR_FLYVIDEO) ||
! 667: (subsystem_vendor_id == PCI_VENDOR_FLYVIDEO_2) ) {
! 668: bktr->card = cards[ (card = CARD_FLYVIDEO) ];
! 669: bktr->card.eepromAddr = eeprom_i2c_address;
! 670: bktr->card.eepromSize = (u_char)(256 / EEPROMBLOCKSIZE);
! 671: goto checkTuner;
! 672: }
! 673:
! 674: if (subsystem_vendor_id == PCI_VENDOR_STB) {
! 675: bktr->card = cards[ (card = CARD_STB) ];
! 676: bktr->card.eepromAddr = eeprom_i2c_address;
! 677: bktr->card.eepromSize = (u_char)(256 / EEPROMBLOCKSIZE);
! 678: goto checkTuner;
! 679: }
! 680:
! 681: if (subsystem_vendor_id == PCI_VENDOR_ASKEY) {
! 682: bktr->card = cards[ (card = CARD_ASKEY_DYNALINK_MAGIC_TVIEW) ];
! 683: bktr->card.eepromAddr = eeprom_i2c_address;
! 684: bktr->card.eepromSize = (u_char)(256 / EEPROMBLOCKSIZE);
! 685: goto checkTuner;
! 686: }
! 687:
! 688: if ((subsystem_vendor_id == PCI_VENDOR_LEADTEK)
! 689: || (subsystem_vendor_id == PCI_VENDOR_LEADTEK_ALT)
! 690: || (subsystem_vendor_id == PCI_VENDOR_LEADTEK_ALT_2)
! 691: || (subsystem_vendor_id == PCI_VENDOR_LEADTEK_ALT_3)) {
! 692: if (subsystem_id == PCI_PRODUCT_LEADTEK_WINFAST_XP)
! 693: bktr->card = cards[ (card = CARD_LEADTEK_XP) ];
! 694: else
! 695: bktr->card = cards[ (card = CARD_LEADTEK) ];
! 696: bktr->card.eepromAddr = eeprom_i2c_address;
! 697: bktr->card.eepromSize = (u_char)(256 / EEPROMBLOCKSIZE);
! 698: goto checkTuner;
! 699: }
! 700:
! 701: if (subsystem_vendor_id == PCI_VENDOR_PINNACLE_ALT) {
! 702: bktr->card = cards[ (card = CARD_MIRO) ];
! 703: bktr->card.eepromAddr = eeprom_i2c_address;
! 704: bktr->card.eepromSize = (u_char)(256 / EEPROMBLOCKSIZE);
! 705: goto checkTuner;
! 706: }
! 707:
! 708: if (subsystem_vendor_id == PCI_VENDOR_TERRATEC) {
! 709: bktr->card = cards[ (card = CARD_TERRATVPLUS) ];
! 710: bktr->card.eepromAddr = eeprom_i2c_address;
! 711: bktr->card.eepromSize = (u_char)(256 / EEPROMBLOCKSIZE);
! 712: goto checkTuner;
! 713: }
! 714:
! 715: if (subsystem_vendor_id == PCI_VENDOR_ATI) {
! 716: bktr->card = cards[ (card = CARD_TVWONDER) ];
! 717: bktr->card.eepromAddr = eeprom_i2c_address;
! 718: bktr->card.eepromSize = (u_char)(256 / EEPROMBLOCKSIZE);
! 719: goto checkTuner;
! 720: }
! 721:
! 722: /*
! 723: * Check which card as the GV-BCTV4 and GV-BCTV5 IODATA make
! 724: * are somewhat different to the GV-BCTV3.
! 725: */
! 726:
! 727: if (subsystem_vendor_id == PCI_VENDOR_IODATA &&
! 728: subsystem_id == PCI_PRODUCT_IODATA_GV_BCTV3) {
! 729: bktr->card = cards[ (card = CARD_IO_BCTV3) ];
! 730: bktr->card.eepromAddr = eeprom_i2c_address;
! 731: bktr->card.eepromSize = (u_char)(256 / EEPROMBLOCKSIZE);
! 732: goto checkTuner;
! 733: }
! 734:
! 735: if (subsystem_vendor_id == PCI_VENDOR_ZOLTRIX) {
! 736: if (subsystem_id == PCI_PRODUCT_ZOLTRIX_GENIE_TV_FM) {
! 737: bktr->card = cards[ (card = CARD_ZOLTRIX_GENIE_FM) ];
! 738: } else {
! 739: bktr->card = cards[ (card = CARD_ZOLTRIX) ];
! 740: }
! 741: bktr->card.eepromAddr = eeprom_i2c_address;
! 742: bktr->card.eepromSize = (u_char)(256 / EEPROMBLOCKSIZE);
! 743: goto checkTuner;
! 744: }
! 745:
! 746: /* Vendor is unknown. We will use the standard probe code */
! 747: /* which may not give best results */
! 748: printf("%s: Warning "
! 749: "- card vendor 0x%04x (model 0x%04x) unknown.\n",
! 750: bktr_name(bktr), subsystem_vendor_id, subsystem_id);
! 751: } else
! 752: printf("%s: Card has no configuration EEPROM. "
! 753: "Cannot determine card make.\n", bktr_name(bktr));
! 754: } /* end of bt878/bt879 card detection code */
! 755:
! 756: /* If we get to this point, we must have a Bt848/848A/849A card */
! 757: /* or a Bt878/879 with an unknown subsystem vendor id */
! 758: /* Try and determine the make of card by clever i2c probing */
! 759:
! 760: /* Check for i2c devices. If none, move on */
! 761: if (!any_i2c_devices) {
! 762: bktr->card = cards[ (card = CARD_INTEL) ];
! 763: bktr->card.eepromAddr = 0;
! 764: bktr->card.eepromSize = 0;
! 765: goto checkTuner;
! 766: }
! 767:
! 768: /* Look for Hauppauge, STB and Osprey cards by the presence */
! 769: /* of an EEPROM */
! 770: /* Note: Bt878 based cards also use EEPROMs so we can only do this */
! 771: /* test on BT848/848A and 849A based cards. */
! 772: if ((bktr->id==BROOKTREE_848) ||
! 773: (bktr->id==BROOKTREE_848A) ||
! 774: (bktr->id==BROOKTREE_849A)) {
! 775:
! 776: /* At i2c address 0xa0, look for Hauppauge and Osprey cards */
! 777: if ( (status = i2cRead( bktr, PFC8582_RADDR )) != ABSENT ) {
! 778:
! 779: /* Read the eeprom contents */
! 780: bktr->card = cards[ (card = CARD_UNKNOWN) ];
! 781: bktr->card.eepromAddr = PFC8582_WADDR;
! 782: bktr->card.eepromSize = (u_char)(256 / EEPROMBLOCKSIZE);
! 783: readEEProm(bktr, 0, 128, eeprom );
! 784:
! 785: /* For Hauppauge, check the EEPROM begins with 0x84 */
! 786: if (eeprom[0] == 0x84) {
! 787: bktr->card = cards[ (card = CARD_HAUPPAUGE) ];
! 788: bktr->card.eepromAddr = PFC8582_WADDR;
! 789: bktr->card.eepromSize = (u_char)(256 / EEPROMBLOCKSIZE);
! 790: goto checkTuner;
! 791: }
! 792:
! 793: /* For Osprey, check the EEPROM begins with "MMAC" */
! 794: if ( (eeprom[0] == 'M') &&(eeprom[1] == 'M')
! 795: &&(eeprom[2] == 'A') &&(eeprom[3] == 'C')) {
! 796: bktr->card = cards[ (card = CARD_OSPREY) ];
! 797: bktr->card.eepromAddr = PFC8582_WADDR;
! 798: bktr->card.eepromSize = (u_char)(256 / EEPROMBLOCKSIZE);
! 799: goto checkTuner;
! 800: }
! 801: printf("%s: Warning: Unknown card type. EEPROM data not recognised\n",
! 802: bktr_name(bktr));
! 803: printf("%s: %x %x %x %x\n", bktr_name(bktr),
! 804: eeprom[0],eeprom[1],eeprom[2],eeprom[3]);
! 805: }
! 806:
! 807: /* look for an STB card */
! 808: if ( (status = i2cRead( bktr, X24C01_RADDR )) != ABSENT ) {
! 809: bktr->card = cards[ (card = CARD_STB) ];
! 810: bktr->card.eepromAddr = X24C01_WADDR;
! 811: bktr->card.eepromSize = (u_char)(128 / EEPROMBLOCKSIZE);
! 812: goto checkTuner;
! 813: }
! 814:
! 815: }
! 816:
! 817: signCard( bktr, 1, 128, (u_char *) &probe_signature );
! 818:
! 819: if (bootverbose) {
! 820: printf("%s: card signature: ", bktr_name(bktr));
! 821: for (j = 0; j < Bt848_MAX_SIGN; j++) {
! 822: printf(" %02x ", probe_signature[j]);
! 823: }
! 824: printf("\n\n");
! 825: }
! 826: for (i = 0;
! 827: i < (sizeof bt848_card_signature)/ sizeof (struct bt848_card_sig);
! 828: i++ ) {
! 829:
! 830: card_found = 1;
! 831: probe_temp = (u_char *) &bt848_card_signature[i].signature;
! 832:
! 833: for (j = 0; j < Bt848_MAX_SIGN; j++) {
! 834: if ((probe_temp[j] & 0xf) != (probe_signature[j] & 0xf)) {
! 835: card_found = 0;
! 836: break;
! 837: }
! 838:
! 839: }
! 840: if (card_found) {
! 841: bktr->card = cards[ card = bt848_card_signature[i].card];
! 842: eeprom_i2c_address = locate_eeprom_address( bktr );
! 843: if (eeprom_i2c_address != -1) {
! 844: bktr->card.eepromAddr = eeprom_i2c_address;
! 845: bktr->card.eepromSize = (u_char)(256 / EEPROMBLOCKSIZE);
! 846: } else {
! 847: bktr->card.eepromAddr = 0;
! 848: bktr->card.eepromSize = 0;
! 849: }
! 850: tuner_i2c_address = locate_tuner_address( bktr );
! 851: select_tuner( bktr, bt848_card_signature[i].tuner );
! 852: goto checkDBX;
! 853: }
! 854: }
! 855:
! 856: /* We do not know the card type. Default to Miro */
! 857: bktr->card = cards[ (card = CARD_MIRO) ];
! 858:
! 859:
! 860: checkEEPROM:
! 861: /* look for a configuration eeprom */
! 862: eeprom_i2c_address = locate_eeprom_address( bktr );
! 863: if (eeprom_i2c_address != -1) {
! 864: bktr->card.eepromAddr = eeprom_i2c_address;
! 865: bktr->card.eepromSize = (u_char)(256 / EEPROMBLOCKSIZE);
! 866: } else {
! 867: bktr->card.eepromAddr = 0;
! 868: bktr->card.eepromSize = 0;
! 869: }
! 870:
! 871:
! 872: checkTuner:
! 873:
! 874: /* look for a tuner */
! 875: tuner_i2c_address = locate_tuner_address( bktr );
! 876: if ( tuner_i2c_address == -1 ) {
! 877: select_tuner( bktr, NO_TUNER );
! 878: goto checkDBX;
! 879: }
! 880:
! 881: #if defined( BKTR_OVERRIDE_TUNER )
! 882: select_tuner( bktr, BKTR_OVERRIDE_TUNER );
! 883: goto checkDBX;
! 884: #endif
! 885: if (bktr->bt848_tuner != -1 ) {
! 886: select_tuner( bktr, bktr->bt848_tuner & 0xff );
! 887: goto checkDBX;
! 888: }
! 889:
! 890: /* Check for i2c devices */
! 891: if (!any_i2c_devices) {
! 892: select_tuner( bktr, NO_TUNER );
! 893: goto checkDBX;
! 894: }
! 895:
! 896: /* differentiate type of tuner */
! 897:
! 898: switch (card) {
! 899: case CARD_MIRO:
! 900: switch (((INL(bktr, BKTR_GPIO_DATA) >> 10)-1)&7) {
! 901: case 0: select_tuner( bktr, TEMIC_PAL ); break;
! 902: case 1: select_tuner( bktr, PHILIPS_PAL ); break;
! 903: case 2: select_tuner( bktr, PHILIPS_NTSC ); break;
! 904: case 3: select_tuner( bktr, PHILIPS_SECAM ); break;
! 905: case 4: select_tuner( bktr, NO_TUNER ); break;
! 906: case 5: select_tuner( bktr, PHILIPS_PALI ); break;
! 907: case 6: select_tuner( bktr, TEMIC_NTSC ); break;
! 908: case 7: select_tuner( bktr, TEMIC_PALI ); break;
! 909: }
! 910: goto checkDBX;
! 911: break;
! 912:
! 913: case CARD_HAUPPAUGE:
! 914: /* Hauppauge kindly supplied the following Tuner Table */
! 915: /* FIXME: I think the tuners the driver selects for types */
! 916: /* 0x08 and 0x15 may be incorrect but no one has complained. */
! 917: /* Old Temic tuners had their own API, but newer Temic tuners */
! 918: /* have the same API as Philips tuners */
! 919: /*
! 920: ID Tuner Model Format We select Format
! 921: 0x00 NONE
! 922: 0x01 EXTERNAL
! 923: 0x02 OTHER
! 924: 0x03 Philips FI1216 BG
! 925: 0x04 Philips FI1216MF BGLL' PHILIPS_SECAM
! 926: 0x05 Philips FI1236 MN PHILIPS_NTSC
! 927: 0x06 Philips FI1246 I PHILIPS_PALI
! 928: 0x07 Philips FI1256 DK
! 929: 0x08 Philips FI1216 MK2 BG PHILIPS_PALI
! 930: 0x09 Philips FI1216MF MK2 BGLL' PHILIPS_SECAM
! 931: 0x0a Philips FI1236 MK2 MN PHILIPS_NTSC
! 932: 0x0b Philips FI1246 MK2 I PHILIPS_PALI
! 933: 0x0c Philips FI1256 MK2 DK
! 934: 0x0d Temic 4032FY5 NTSC TEMIC_NTSC
! 935: 0x0e Temic 4002FH5 BG TEMIC_PAL
! 936: 0x0f Temic 4062FY5 I TEMIC_PALI
! 937: 0x10 Philips FR1216 MK2 BG
! 938: 0x11 Philips FR1216MF MK2 BGLL' PHILIPS_FR1236_SECAM
! 939: 0x12 Philips FR1236 MK2 MN PHILIPS_FR1236_NTSC
! 940: 0x13 Philips FR1246 MK2 I
! 941: 0x14 Philips FR1256 MK2 DK
! 942: 0x15 Philips FM1216 BG PHILIPS_FR1216_PAL
! 943: 0x16 Philips FM1216MF BGLL' PHILIPS_FR1236_SECAM
! 944: 0x17 Philips FM1236 MN PHILIPS_FR1236_NTSC
! 945: 0x18 Philips FM1246 I
! 946: 0x19 Philips FM1256 DK
! 947: 0x1a Temic 4036FY5 MN (FI1236 MK2 clone) PHILIPS_NTSC
! 948: 0x1b Samsung TCPN9082D MN
! 949: 0x1c Samsung TCPM9092P Pal BG/I/DK
! 950: 0x1d Temic 4006FH5 BG PHILIPS_PALI
! 951: 0x1e Samsung TCPN9085D MN/Radio
! 952: 0x1f Samsung TCPB9085P Pal BG/I/DK / Radio
! 953: 0x20 Samsung TCPL9091P Pal BG & Secam L/L'
! 954: 0x21 Temic 4039FY5 NTSC Radio
! 955: 0x22 Philips FQ1216ME Pal BGIDK & Secam L/L'
! 956: 0x23 Temic 4066FY5 Pal I (FI1246 MK2 clone) PHILIPS_PALI
! 957: 0x24 Philips TD1536 MN/ATSCDigital
! 958: 0x25 Philips TD1536D MN/ATSCDigital DUAL INPUT
! 959: 0x26 Philips FMR1236 M/N FM(no demod)
! 960: 0x27 Philips FI1256MP B/G, D/K
! 961: 0x28 Samsung TCPQ9091P BG/I/DK, L/L'
! 962: 0x29 Temic 4006FN5 BG/I/DK
! 963: 0x2a Temic 4009FR5 BG FM PHILIPS_FR1216_PAL
! 964: 0x2b Temic 4046FM5 B/G, I, D/K, L/L'
! 965: 0x2c Temic 4009FN5 B/G, I, D/K, FM (no demod)
! 966: 0x2d Philips TD1536D_FH_44 MN/ATSCDigital DUAL INPUT
! 967: */
! 968:
! 969:
! 970: /* Determine the model number from the eeprom */
! 971: if (bktr->card.eepromAddr != 0) {
! 972: /* eeprom data block structure */
! 973: unsigned char *block_1, *block_2, *block_3, *block_4;
! 974: int block_1_data_size, block_2_data_size, block_3_data_size;
! 975: int block_1_total_size, block_2_total_size, block_3_total_size;
! 976: int block_4_header_size;
! 977:
! 978: unsigned int model,revision;
! 979: unsigned char tuner_code;
! 980: unsigned char no_audio_mux;
! 981:
! 982: readEEProm(bktr, 0, 128, eeprom);
! 983:
! 984: /* LOCATE THE EEPROM DATA BLOCKS */
! 985: block_1 = &eeprom[0];
! 986: block_1_data_size = (block_1[2] << 8 | block_1[1]);
! 987: block_1_total_size = block_1_data_size + 3; /* Header bytes */
! 988:
! 989: block_2 = &eeprom[block_1_total_size];
! 990: block_2_data_size = (block_2[2] << 8 | block_2[1]);
! 991: block_2_total_size = block_2_data_size + 3; /* Header bytes */
! 992:
! 993: block_3 = &eeprom[block_1_total_size + block_2_total_size];
! 994: block_3_data_size = (block_3[0] &0x07);
! 995: block_3_total_size = block_3_data_size + 1; /* Header size */
! 996:
! 997: block_4 = &eeprom[block_1_total_size +block_2_total_size +block_3_total_size];
! 998: block_4_header_size = 1;
! 999:
! 1000: model = (block_1[12] << 8 | block_1[11]);
! 1001: revision = (block_1[15] << 16 | block_1[14] << 8 | block_1[13]);
! 1002:
! 1003: tuner_code = block_1[9];
! 1004:
! 1005: no_audio_mux = ((block_3[3] >> 7) &0x01);
! 1006:
! 1007: if (no_audio_mux) bktr->audio_mux_present = 0;
! 1008:
! 1009: if (verbose)
! 1010: printf("%s: Hauppauge Model %d %c%c%c%c\n",
! 1011: bktr_name(bktr),
! 1012: model,
! 1013: ((revision >> 18) & 0x3f) + 32,
! 1014: ((revision >> 12) & 0x3f) + 32,
! 1015: ((revision >> 6) & 0x3f) + 32,
! 1016: ((revision >> 0) & 0x3f) + 32 );
! 1017:
! 1018: /* Determine the tuner type from the eeprom */
! 1019:
! 1020: switch (tuner_code) {
! 1021:
! 1022: case 0x5:
! 1023: case 0x0a:
! 1024: case 0x1a:
! 1025: select_tuner( bktr, PHILIPS_NTSC );
! 1026: goto checkDBX;
! 1027:
! 1028: case 0x4:
! 1029: case 0x9:
! 1030: select_tuner( bktr, PHILIPS_SECAM );
! 1031: goto checkDBX;
! 1032:
! 1033: case 0x11:
! 1034: case 0x16:
! 1035: select_tuner( bktr, PHILIPS_FR1236_SECAM );
! 1036: goto checkDBX;
! 1037:
! 1038: case 0x12:
! 1039: case 0x17:
! 1040: case 0x21: /* hauppage #191 wintv-fm -wsr 2003/1/13 */
! 1041: select_tuner( bktr, PHILIPS_FR1236_NTSC );
! 1042: goto checkDBX;
! 1043:
! 1044: case 0x6:
! 1045: case 0x8:
! 1046: case 0xb:
! 1047: case 0x1d:
! 1048: case 0x23:
! 1049: select_tuner( bktr, PHILIPS_PALI );
! 1050: goto checkDBX;
! 1051:
! 1052: case 0xd:
! 1053: select_tuner( bktr, TEMIC_NTSC );
! 1054: goto checkDBX;
! 1055:
! 1056: case 0xe:
! 1057: select_tuner( bktr, TEMIC_PAL );
! 1058: goto checkDBX;
! 1059:
! 1060: case 0xf:
! 1061: select_tuner( bktr, TEMIC_PALI );
! 1062: goto checkDBX;
! 1063:
! 1064: case 0x15:
! 1065: select_tuner( bktr, PHILIPS_FR1216_PAL );
! 1066: goto checkDBX;
! 1067:
! 1068: case 0x2a:
! 1069: bktr->msp_use_mono_source = 1;
! 1070: select_tuner( bktr, PHILIPS_FR1216_PAL );
! 1071: goto checkDBX;
! 1072:
! 1073: default :
! 1074: printf("%s: Warning - Unknown Hauppauge Tuner 0x%x\n",
! 1075: bktr_name(bktr), tuner_code);
! 1076: }
! 1077: }
! 1078: break;
! 1079:
! 1080:
! 1081: case CARD_AVER_MEDIA:
! 1082: /* AVerMedia kindly supplied some details of their EEPROM contents
! 1083: * which allow us to auto select the Tuner Type.
! 1084: * Only the newer AVerMedia cards actually have an EEPROM.
! 1085: */
! 1086: if (bktr->card.eepromAddr != 0) {
! 1087:
! 1088: u_char tuner_make; /* Eg Philips, Temic */
! 1089: u_char tuner_tv_fm; /* TV or TV with FM Radio */
! 1090: u_char tuner_format; /* Eg NTSC, PAL, SECAM */
! 1091: int tuner;
! 1092:
! 1093: int tuner_0_table[] = {
! 1094: PHILIPS_NTSC, PHILIPS_PAL,
! 1095: PHILIPS_PAL, PHILIPS_PAL,
! 1096: PHILIPS_PAL, PHILIPS_PAL,
! 1097: PHILIPS_SECAM, PHILIPS_SECAM,
! 1098: PHILIPS_SECAM, PHILIPS_PAL};
! 1099:
! 1100: int tuner_0_fm_table[] = {
! 1101: PHILIPS_FR1236_NTSC, PHILIPS_FR1216_PAL,
! 1102: PHILIPS_FR1216_PAL, PHILIPS_FR1216_PAL,
! 1103: PHILIPS_FR1216_PAL, PHILIPS_FR1216_PAL,
! 1104: PHILIPS_FR1236_SECAM, PHILIPS_FR1236_SECAM,
! 1105: PHILIPS_FR1236_SECAM, PHILIPS_FR1216_PAL};
! 1106:
! 1107: int tuner_1_table[] = {
! 1108: TEMIC_NTSC, TEMIC_PAL, TEMIC_PAL,
! 1109: TEMIC_PAL, TEMIC_PAL, TEMIC_PAL,
! 1110: TEMIC_SECAM, TEMIC_SECAM, TEMIC_SECAM,
! 1111: TEMIC_PAL};
! 1112:
! 1113:
! 1114: /* Extract information from the EEPROM data */
! 1115: readEEProm(bktr, 0, 128, eeprom);
! 1116:
! 1117: tuner_make = (eeprom[0x41] & 0x7);
! 1118: tuner_tv_fm = (eeprom[0x41] & 0x18) >> 3;
! 1119: tuner_format = (eeprom[0x42] & 0xf0) >> 4;
! 1120:
! 1121: /* Treat tuner make 0 (Philips) and make 2 (LG) the same */
! 1122: if ( ((tuner_make == 0) || (tuner_make == 2))
! 1123: && (tuner_format <= 9) && (tuner_tv_fm == 0) ) {
! 1124: tuner = tuner_0_table[tuner_format];
! 1125: select_tuner( bktr, tuner );
! 1126: goto checkDBX;
! 1127: }
! 1128:
! 1129: if ( ((tuner_make == 0) || (tuner_make == 2))
! 1130: && (tuner_format <= 9) && (tuner_tv_fm == 1) ) {
! 1131: tuner = tuner_0_fm_table[tuner_format];
! 1132: select_tuner( bktr, tuner );
! 1133: goto checkDBX;
! 1134: }
! 1135:
! 1136: if ( (tuner_make == 1) && (tuner_format <= 9) ) {
! 1137: tuner = tuner_1_table[tuner_format];
! 1138: select_tuner( bktr, tuner );
! 1139: goto checkDBX;
! 1140: }
! 1141:
! 1142: printf("%s: Warning - Unknown AVerMedia Tuner Make %d Format %d\n",
! 1143: bktr_name(bktr), tuner_make, tuner_format);
! 1144: }
! 1145: break;
! 1146:
! 1147: case CARD_LEADTEK:
! 1148: #if BKTR_SYSTEM_DEFAULT == BROOKTREE_PAL
! 1149: select_tuner( bktr, PHILIPS_FR1216_PAL );
! 1150: #else
! 1151: select_tuner( bktr, PHILIPS_FR1236_NTSC );
! 1152: #endif
! 1153: goto checkDBX;
! 1154: break;
! 1155:
! 1156: case CARD_TVWONDER:
! 1157: select_tuner( bktr, PHILIPS_NTSC );
! 1158: goto checkDBX;
! 1159: break;
! 1160:
! 1161: case CARD_ZOLTRIX_GENIE_FM:
! 1162: select_tuner( bktr, PHILIPS_FR1236_NTSC );
! 1163: goto checkDBX;
! 1164: break;
! 1165:
! 1166: case CARD_IO_BCTV3:
! 1167: select_tuner( bktr, ALPS_TSCH5 ); /* ALPS_TSCH6, in fact. */
! 1168: goto checkDBX;
! 1169: break;
! 1170:
! 1171: case CARD_LEADTEK_XP:
! 1172: select_tuner( bktr, TIVISION_TVF5533 );
! 1173: goto checkDBX;
! 1174: break;
! 1175:
! 1176: } /* end switch(card) */
! 1177:
! 1178:
! 1179: /* At this point, a goto checkDBX has not occurred */
! 1180: /* We have not been able to select a Tuner */
! 1181: /* Some cards make use of the tuner address to */
! 1182: /* identify the make/model of tuner */
! 1183:
! 1184: /* At address 0xc0/0xc1 we often find a TEMIC NTSC */
! 1185: if ( i2cRead( bktr, 0xc1 ) != ABSENT ) {
! 1186: select_tuner( bktr, TEMIC_NTSC );
! 1187: goto checkDBX;
! 1188: }
! 1189:
! 1190: /* At address 0xc6/0xc7 we often find a PHILIPS NTSC Tuner */
! 1191: if ( i2cRead( bktr, 0xc7 ) != ABSENT ) {
! 1192: select_tuner( bktr, PHILIPS_NTSC );
! 1193: goto checkDBX;
! 1194: }
! 1195:
! 1196: /* Address 0xc2/0xc3 is default (or common address) for several */
! 1197: /* tuners and we cannot tell which is which. */
! 1198: /* And for all other tuner i2c addresses, select the default */
! 1199: select_tuner( bktr, DEFAULT_TUNER );
! 1200:
! 1201:
! 1202: checkDBX:
! 1203: #if defined( BKTR_OVERRIDE_DBX )
! 1204: bktr->card.dbx = BKTR_OVERRIDE_DBX;
! 1205: goto checkMSP;
! 1206: #endif
! 1207: /* Check for i2c devices */
! 1208: if (!any_i2c_devices) {
! 1209: goto checkMSP;
! 1210: }
! 1211:
! 1212: /* probe for BTSC (dbx) chip */
! 1213: if ( i2cRead( bktr, TDA9850_RADDR ) != ABSENT )
! 1214: bktr->card.dbx = 1;
! 1215:
! 1216: checkMSP:
! 1217: /* If this is a Hauppauge Bt878 card, we need to enable the
! 1218: * MSP 34xx audio chip.
! 1219: * If this is a Hauppauge Bt848 card, reset the MSP device.
! 1220: * The MSP reset line is wired to GPIO pin 5. On Bt878 cards a pulldown
! 1221: * resistor holds the device in reset until we set GPIO pin 5.
! 1222: */
! 1223:
! 1224: /* Optionally skip the MSP reset. This is handy if you initialise the
! 1225: * MSP audio in another operating system (eg Windows) first and then
! 1226: * do a soft reboot.
! 1227: */
! 1228:
! 1229: #ifndef BKTR_NO_MSP_RESET
! 1230: if (card == CARD_HAUPPAUGE) {
! 1231: OUTL(bktr, BKTR_GPIO_OUT_EN, INL(bktr, BKTR_GPIO_OUT_EN) | (1<<5));
! 1232: OUTL(bktr, BKTR_GPIO_DATA, INL(bktr, BKTR_GPIO_DATA) | (1<<5)); /* write '1' */
! 1233: DELAY(2500); /* wait 2.5ms */
! 1234: OUTL(bktr, BKTR_GPIO_DATA, INL(bktr, BKTR_GPIO_DATA) & ~(1<<5)); /* write '0' */
! 1235: DELAY(2500); /* wait 2.5ms */
! 1236: OUTL(bktr, BKTR_GPIO_DATA, INL(bktr, BKTR_GPIO_DATA) | (1<<5)); /* write '1' */
! 1237: DELAY(2500); /* wait 2.5ms */
! 1238: }
! 1239: #endif
! 1240:
! 1241: #if defined( BKTR_OVERRIDE_MSP )
! 1242: bktr->card.msp3400c = BKTR_OVERRIDE_MSP;
! 1243: goto checkMSPEnd;
! 1244: #endif
! 1245:
! 1246: /* Check for i2c devices */
! 1247: if (!any_i2c_devices) {
! 1248: goto checkMSPEnd;
! 1249: }
! 1250:
! 1251: if ( i2cRead( bktr, MSP3400C_RADDR ) != ABSENT ) {
! 1252: bktr->card.msp3400c = 1;
! 1253: }
! 1254:
! 1255: checkMSPEnd:
! 1256:
! 1257: if (bktr->card.msp3400c) {
! 1258: bktr->msp_addr = MSP3400C_WADDR;
! 1259: msp_read_id( bktr );
! 1260: printf("%s: Detected a MSP%s at 0x%x\n", bktr_name(bktr),
! 1261: bktr->msp_version_string,
! 1262: bktr->msp_addr);
! 1263:
! 1264: }
! 1265:
! 1266: /* Check for Dolby Surround Sound DPL3518A sound chip */
! 1267: if ( i2cRead( bktr, DPL3518A_RADDR ) != ABSENT ) {
! 1268: bktr->card.dpl3518a = 1;
! 1269: }
! 1270:
! 1271: if (bktr->card.dpl3518a) {
! 1272: bktr->dpl_addr = DPL3518A_WADDR;
! 1273: dpl_read_id( bktr );
! 1274: printf("%s: Detected a DPL%s at 0x%x\n", bktr_name(bktr),
! 1275: bktr->dpl_version_string,
! 1276: bktr->dpl_addr);
! 1277: }
! 1278:
! 1279: /* Start of Check Remote */
! 1280: /* Check for the Hauppauge IR Remote Control */
! 1281: /* If there is an external unit, the internal will be ignored */
! 1282:
! 1283: bktr->remote_control = 0; /* initial value */
! 1284:
! 1285: if (any_i2c_devices) {
! 1286: if (i2cRead( bktr, HAUP_REMOTE_EXT_RADDR ) != ABSENT ) {
! 1287: bktr->remote_control = 1;
! 1288: bktr->remote_control_addr = HAUP_REMOTE_EXT_RADDR;
! 1289: } else if (i2cRead( bktr, HAUP_REMOTE_INT_RADDR ) != ABSENT ) {
! 1290: bktr->remote_control = 1;
! 1291: bktr->remote_control_addr = HAUP_REMOTE_INT_RADDR;
! 1292: }
! 1293: }
! 1294:
! 1295: /* If a remote control is found, poll it 5 times to turn off the LED */
! 1296: if (bktr->remote_control) {
! 1297: int i;
! 1298: for (i=0; i<5; i++)
! 1299: i2cRead( bktr, bktr->remote_control_addr );
! 1300: }
! 1301: /* End of Check Remote */
! 1302:
! 1303: #if defined( BKTR_USE_PLL )
! 1304: bktr->xtal_pll_mode = BT848_USE_PLL;
! 1305: goto checkPLLEnd;
! 1306: #endif
! 1307: /* Default is to use XTALS and not PLL mode */
! 1308: bktr->xtal_pll_mode = BT848_USE_XTALS;
! 1309:
! 1310: /* Enable PLL mode for OSPREY users */
! 1311: if (card == CARD_OSPREY)
! 1312: bktr->xtal_pll_mode = BT848_USE_PLL;
! 1313:
! 1314: /* Enable PLL mode for Video Highway Xtreme users */
! 1315: if (card == CARD_VIDEO_HIGHWAY_XTREME)
! 1316: bktr->xtal_pll_mode = BT848_USE_PLL;
! 1317:
! 1318: /* Enable PLL mode for ATI TV_Wonder/VE */
! 1319: if (card == CARD_TVWONDER)
! 1320: bktr->xtal_pll_mode = BT848_USE_PLL;
! 1321:
! 1322:
! 1323: /* Most (perhaps all) Bt878 cards need to be switched to PLL mode */
! 1324: /* as they only fit the NTSC crystal to their cards */
! 1325: /* Default to enabling PLL mode for all Bt878/879 cards */
! 1326:
! 1327: if ((bktr->id==BROOKTREE_878 || bktr->id==BROOKTREE_879) )
! 1328: bktr->xtal_pll_mode = BT848_USE_PLL;
! 1329:
! 1330:
! 1331: #if defined( BKTR_USE_PLL )
! 1332: checkPLLEnd:
! 1333: #endif
! 1334:
! 1335:
! 1336: bktr->card.tuner_pllAddr = tuner_i2c_address;
! 1337:
! 1338: if ( verbose ) {
! 1339: printf( "%s: %s", bktr_name(bktr), bktr->card.name );
! 1340: if ( bktr->card.tuner )
! 1341: printf( ", %s tuner", bktr->card.tuner->name );
! 1342: if ( bktr->card.dbx )
! 1343: printf( ", dbx stereo" );
! 1344: if ( bktr->card.msp3400c )
! 1345: printf( ", msp3400c stereo" );
! 1346: if ( bktr->card.dpl3518a )
! 1347: printf( ", dpl3518a dolby" );
! 1348: if ( bktr->remote_control )
! 1349: printf( ", remote control" );
! 1350: printf( ".\n" );
! 1351: }
! 1352: }
! 1353:
! 1354: #undef ABSENT
CVSweb