Annotation of sys/dev/pci/bt8370reg.h, Revision 1.1
1.1 ! nbrk 1: /* $OpenBSD: bt8370reg.h,v 1.3 2005/12/19 15:53:15 claudio Exp $ */
! 2:
! 3: /*
! 4: * Copyright (c) 2004,2005 Internet Business Solutions AG, Zurich, Switzerland
! 5: * Written by: Andre Oppermann <oppermann@accoom.net>
! 6: *
! 7: * Permission to use, copy, modify, and distribute this software for any
! 8: * purpose with or without fee is hereby granted, provided that the above
! 9: * copyright notice and this permission notice appear in all copies.
! 10: *
! 11: * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
! 12: * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
! 13: * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
! 14: * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
! 15: * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
! 16: * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
! 17: * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
! 18: */
! 19:
! 20: /* Bt8370 Register definitions */
! 21: /* Globals */
! 22: #define Bt8370_DID 0x000 /* Device Identification */
! 23: #define Bt8370_CR0 0x001 /* Primary control register */
! 24: #define CR0_RESET 0x80 /* Reset Framer */
! 25: #define CR0_E1_FAS 0x00 /* E1 FAS only */
! 26: #define CR0_E1_FAS_CRC 0x08 /* E1 FAS+CRC4 */
! 27: #define CR0_T1_SF 0x09 /* T1 SF */
! 28: #define CR0_T1_ESF 0x1B /* T1 ESF+ForceCRC */
! 29: #define Bt8370_JAT_CR 0x002 /* Jitter attenuator conf */
! 30: #define JAT_CR_JEN 0x80 /* Jitter anntenuator enable */
! 31: #define JAT_CR_JFREE 0x40 /* Free running JCLK and CLADO */
! 32: #define JAT_CR_JDIR_TX 0x00 /* JAT in TX direction */
! 33: #define JAT_CR_JDIR_RX 0x20 /* JAT in RC direction */
! 34: #define JAT_CR_JAUTO 0x10 /* JCLK Acceleration */
! 35: #define JAT_CR_CENTER 0x80 /* Force JAT to center */
! 36: #define JAT_CR_JSIZE8 0x00 /* Elastic store size 8 bits */
! 37: #define JAT_CR_JSIZE16 0x01 /* Elastic store size 16 bits */
! 38: #define JAT_CR_JSIZE32 0x02 /* Elastic store size 32 bits */
! 39: #define JAT_CR_JSIZE64 0x03 /* Elastic store size 64 bits */
! 40: #define JAT_CR_JSIZE128 0x04 /* Elastic store size 128 bits */
! 41: #define Bt8370_IRR 0x003 /* Interrupt request register */
! 42: /* Interrupt Status */
! 43: #define Bt8370_ISR7 0x004 /* Alarm 1 Interrupt Status */
! 44: #define Bt8370_ISR6 0x005 /* Alarm 2 Interrupt Status */
! 45: #define Bt8370_ISR5 0x006 /* Error Interrupt Status */
! 46: #define Bt8370_ISR4 0x007 /* Counter Overflow Interrupt Status */
! 47: #define Bt8370_ISR3 0x008 /* Timer Interrupt Status */
! 48: #define Bt8370_ISR2 0x009 /* Data Link 1 Interrupt Status */
! 49: #define Bt8370_ISR1 0x00A /* Data Link 2 Interrupt Status */
! 50: #define Bt8370_ISR0 0x00B /* Pattern Interrupt Status */
! 51: /* Interrupt Enable */
! 52: #define Bt8370_IER7 0x00C /* Alarm 1 Interrupt Enable register */
! 53: #define Bt8370_IER6 0x00D /* Alarm 2 Interrupt Enable register */
! 54: #define Bt8370_IER5 0x00E /* Error Interrupt Enable register */
! 55: #define Bt8370_IER4 0x00F /* Count Overflow Interrupt Enable register */
! 56: #define Bt8370_IER3 0x010 /* Timer Interrupt Enable register */
! 57: #define Bt8370_IER2 0x011 /* Data Link 1 Interrupt Enable register */
! 58: #define Bt8370_IER1 0x012 /* Date Link 2 Interrupt Enable register */
! 59: #define Bt8370_IER0 0x013 /* Pattern Interrupt Enable register */
! 60: /* Primary */
! 61: #define Bt8370_LOOP 0x014 /* Loopback Configuration register */
! 62: #define LOOP_PLOOP 0x08 /* Remote Payload Loopback */
! 63: #define LOOP_LLOOP 0x04 /* Remote Line Loopback */
! 64: #define LOOP_FLOOP 0x02 /* Local Framer Loopback */
! 65: #define LOOP_ALOOP 0x01 /* Local Analog Loopback */
! 66: #define Bt8370_DL3_TS 0x015 /* External Data Link Channel */
! 67: #define Bt8370_DL3_BIT 0x016 /* External Data Link Bit */
! 68: #define Bt8370_FSTAT 0x017 /* Offline Framer Status */
! 69: #define FSTAT_INVALID 0x10 /* No candidate */
! 70: #define FSTAT_FOUND 0x08 /* Frame Search Successful */
! 71: #define FSTAT_TIMEOUT 0x04 /* Framer Search Timeout */
! 72: #define FSTAT_ACTIVE 0x02 /* Framer Active */
! 73: #define FSTAT_RXTXN 0x01 /* RX/TX Reframe Operation */
! 74: #define Bt8370_PIO 0x018 /* Programmable Input/Output */
! 75: #define PIO_ONESEC_IO 0x80 /* */
! 76: #define PIO_RDL_IO 0x40 /* */
! 77: #define PIO_TDL_IO 0x20 /* */
! 78: #define PIO_INDY_IO 0x10 /* */
! 79: #define PIO_RFSYNC_IO 0x08 /* */
! 80: #define PIO_RMSYNC_IO 0x04 /* */
! 81: #define PIO_TFSYNC_IO 0x02 /* */
! 82: #define PIO_TMSYNC_IO 0x01 /* */
! 83: #define Bt8370_POE 0x019 /* Programmable Output Enable */
! 84: #define POE_TDL_OE 0x20 /* */
! 85: #define POE_RDL_OE 0x10 /* */
! 86: #define POE_INDY_OE 0x08 /* */
! 87: #define POE_TCKO_OE 0x04 /* */
! 88: #define POE_CLADO_OE 0x02 /* */
! 89: #define POE_RCKO_OE 0x01 /* */
! 90: #define Bt8370_CMUX 0x01A /* Clock Input Mux */
! 91: #define CMUX_RSBCKI_RSBCKI 0x00 /* */
! 92: #define CMUX_RSBCKI_TSBCKI 0x40 /* */
! 93: #define CMUX_RSBCKI_CLADI 0x80 /* */
! 94: #define CMUX_RSBCKI_CLADO 0xC0 /* */
! 95: #define CMUX_TSBCKI_TSBCKI 0x00 /* */
! 96: #define CMUX_TSBCKI_RSBCKI 0x10 /* */
! 97: #define CMUX_TSBCKI_CLADI 0x20 /* */
! 98: #define CMUX_TSBCKI_CLADO 0x30 /* */
! 99: #define CMUX_CLADI_CLADI 0x00 /* */
! 100: #define CMUX_CLADI_RCKO 0x04 /* */
! 101: #define CMUX_CLADI_TSBCKI 0x08 /* */
! 102: #define CMUX_CLADI_TCKI 0x0C /* */
! 103: #define CMUX_TCKI_TCKI 0x00 /* */
! 104: #define CMUX_TCKI_RCKO 0x01 /* */
! 105: #define CMUX_TCKI_RSBCKI 0x02 /* */
! 106: #define CMUX_TCKI_CLADO 0x03 /* */
! 107: #define Bt8370_TMUX 0x01B /* Test Mux Configuration */
! 108: #define Bt8370_TEST 0x01C /* Test Configuration */
! 109: /* Receive LIU (RLIU) */
! 110: #define Bt8370_LIU_CR 0x020 /* LIU Configuration */
! 111: #define LIU_CR_RST_LIU 0x80 /* Reset RLIU */
! 112: #define LIU_CR_SQUELCH 0x40 /* Enable Squelch */
! 113: #define LIU_CR_FORCE_VGA 0x20 /* Internal Variable Gain Amp */
! 114: #define LIU_CR_RDIGI 0x10 /* Enable Receive Digital Inputs */
! 115: #define LIU_CR_ATTN0 0x00 /* Bridge Attenuation 0db */
! 116: #define LIU_CR_ATTN10 0x04 /* Bridge Attenuation -10db */
! 117: #define LIU_CR_ATTN20 0x08 /* Bridge Attenuation -20db */
! 118: #define LIU_CR_ATTN30 0x0C /* Bridge Attenuation -30db */
! 119: #define LIU_CR_MAGIC 0x01 /* This one must be enabled */
! 120: #define Bt8370_RSTAT 0x021 /* Receive LIU Status */
! 121: #define RSTAT_CPDERR 0x80 /* CLAD Phase detector lost lock */
! 122: #define RSTAT_JMPTY 0x40 /* JAT Empty/Full */
! 123: #define RSTAT_ZCSUB 0x20 /* ZCS detected */
! 124: #define RSTAT_EXZ 0x10 /* Excessive Zeros */
! 125: #define RSTAT_BPV 0x08 /* Bipolar Violations */
! 126: #define RSTAT_EYEOPEN 0x02 /* Equalization State */
! 127: #define RSTAT_PRE_EQ 0x01 /* Pre-Equalizer Status */
! 128: #define Bt8370_RLIU_CR 0x022 /* Receive LIU Configuration */
! 129: #define RLIU_CR_FRZ_SHORT 0x80 /* Freeze Equalizer for short lines */
! 130: #define RLIU_CR_HI_CLICE 0x40 /* High Clock Slicer Threshold */
! 131: #define RLIU_CR_AGC32 0x00 /* AGC Observation Window 32bit */
! 132: #define RLIU_CR_AGC128 0x10 /* AGC Observation Window 128bit */
! 133: #define RLIU_CR_AGC512 0x20 /* AGC Observation Window 512bit */
! 134: #define RLIU_CR_AGC2048 0x30 /* AGC Observation Window 2048bit */
! 135: #define RLIU_CR_EQ_FRZ 0x08 /* Freeze EQ Coefficients */
! 136: #define RLIU_CR_OOR_BLOCK 0x04 /* Disable automatic RLBO */
! 137: #define RLIU_CR_RLBO 0x02 /* Receiver Line Build Out */
! 138: #define RLIU_CR_LONG_EYE 0x01 /* Eye Open Timeout 8192bit */
! 139: #define Bt8370_LPF 0x023 /* RPLL Low Pass Filter */
! 140: #define Bt8370_VGA_MAX 0x024 /* Variable Gain Amplifier Maximum */
! 141: #define Bt8370_EQ_DAT 0x025 /* Equalizer Coefficient Data register */
! 142: #define Bt8370_EQ_PTR 0x026 /* Equalizer Coefficient Table Pointer */
! 143: #define Bt8370_DSLICE 0x027 /* Data Slicer Threshold */
! 144: #define Bt8370_EQ_OUT 0x028 /* Equalizer Output Levels */
! 145: #define Bt8370_VGA 0x029 /* Variable Gain Amplifier Status */
! 146: #define Bt8370_PRE_EQ 0x02A /* Pre-Equalizer */
! 147: #define Bt8370_COEFF 0x030 /* -037 *//* LMS Adjusted Equalizer Coefficient Status */
! 148: #define Bt8370_GAIN 0x038 /* -03C *//* Equalizer Gain Thresholds */
! 149: /* Digital Reveiver (RCVR) */
! 150: #define Bt8370_RCR0 0x040 /* Receiver Configuration */
! 151: #define RCR0_HDB3 0x00 /* */
! 152: #define RCR0_B8ZS 0x00 /* */
! 153: #define RCR0_AMI 0x80 /* */
! 154: #define RCR0_RABORT 0x40 /* */
! 155: #define RCR0_RFORCE 0x20 /* */
! 156: #define RCR0_LFA_FAS 0x18 /* 3 consecutive FAS Errors */
! 157: #define RCR0_LFA_FASCRC 0x08 /* 3 consecutive FAS or 915 CRC Errors */
! 158: #define RCR0_LFA_26F 0x08 /* 2 out of 6 F bit Errors */
! 159: #define RCR0_RZCS_BPV 0x00 /* */
! 160: #define RCR0_RZCS_NBPV 0x01 /* */
! 161: #define Bt8370_RPATT 0x041 /* Receive Test Pattern Configuration */
! 162: #define Bt8370_RLB 0x042 /* Receive Loopback Code Detector Configuration */
! 163: #define Bt8370_LBA 0x043 /* Loopback Activate Code Pattern */
! 164: #define Bt8370_LBD 0x044 /* Loopback Deactivate Code Pattern */
! 165: #define Bt8370_RALM 0x045 /* Receive Alarm Signal Configuration */
! 166: #define RALM_FSNFAS 0x20 /* Include FS/NFAS in FERR and FRED */
! 167: #define Bt8370_LATCH 0x046 /* Alarm/Error/Counter Latch Configuration */
! 168: #define LATCH_STOPCNT 0x08 /* Stop Error Counter during RLOF,RLOS,RAIS */
! 169: #define Bt8370_ALM1 0x047 /* Alarm 1 Status */
! 170: #define ALM1_RMYEL 0x80 /* Receive Multifram Yellow Alarm */
! 171: #define ALM1_RYEL 0x40 /* Receive Yellow Alarm */
! 172: #define ALM1_RAIS 0x10 /* Reveive Alarm Indication Signal */
! 173: #define ALM1_RALOS 0x09 /* Receive Analog Loss of Signal */
! 174: #define ALM1_RLOS 0x04 /* Receive Loss of Signal */
! 175: #define ALM1_RLOF 0x02 /* Receive Loss of Frame Alignment */
! 176: #define ALM1_SIGFRZ 0x01 /* Signalling Freeze */
! 177: #define Bt8370_ALM2 0x048 /* Alarm 2 Status */
! 178: #define ALM2_LOOPDN 0x80 /* */
! 179: #define ALM2_LOOPUP 0x40 /* */
! 180: #define ALM2_TSHORT 0x10 /* Transmit Short Circuit */
! 181: #define ALM2_TLOC 0x08 /* Transmit Loss of clock */
! 182: #define ALM2_TLOF 0x02 /* Transmit Loss of Frame alignment */
! 183: #define Bt8370_ALM3 0x049 /* Alarm 3 Status */
! 184: #define ALM3_RMAIS 0x40 /* Receive TS16 Alarm Indication */
! 185: #define ALM3_SEF 0x20 /* Severely Errored Frame */
! 186: #define ALM3_SRED 0x10 /* Loss of CAS Alignment */
! 187: #define ALM3_MRED 0x08 /* Loss of MFAS Alignment */
! 188: #define ALM3_FRED 0x04 /* Loss of T1/FAS Alignment */
! 189: #define ALM3_LOF1 0x02 /* Reason for Loss of Frame Alignment */
! 190: #define ALM3_LOF0 0x01 /* Reason for Loss of Frame Alignment */
! 191: /* Error/Alarm Counters */
! 192: #define Bt8370_FERR_LSB 0x050 /* Framing Bit Error Counter LSB */
! 193: #define Bt8370_FERR_MSB 0x051 /* ditto MSB */
! 194: #define Bt8370_CERR_LSB 0x052 /* CRC Error Counter LSB */
! 195: #define Bt8370_CERR_MSB 0x053 /* ditto MSB */
! 196: #define Bt8370_LCV_LSB 0x054 /* Line Code Violation Counter LSB*/
! 197: #define Bt8370_LCV_MSB 0x055 /* ditto MSB */
! 198: #define Bt8370_FEBE_LSB 0x056 /* Far End Block Error Counter LSB*/
! 199: #define Bt8370_FEBE_MSB 0x057 /* ditto MSB */
! 200: #define Bt8370_BERR_LSB 0x058 /* PRBS Bit Error Counter LSB */
! 201: #define Bt8370_BERR_MSB 0x059 /* ditto MSB */
! 202: /* Receive Sa-Byte */
! 203: #define Bt8370_RSA4 0x05B /* Receive Sa4 Byte Buffer */
! 204: #define Bt8370_RSA5 0x05C /* ditto Sa5 */
! 205: #define Bt8370_RSA6 0x05D /* ditto Sa6 */
! 206: #define Bt8370_RSA7 0x05E /* ditto Sa7 */
! 207: #define Bt8370_RSA8 0x05F /* ditto Sa8 */
! 208: /* Transmit LIU (TLIU) */
! 209: #define Bt8370_SHAPE 0x060 /* -067 *//* Transmit Pulse Shape Configuration */
! 210: #define Bt8370_TLIU_CR 0x068 /* Transmit LIU Configuration */
! 211: #define TLIU_CR_120 0x4C /* 120 Ohms, external term */
! 212: #define TLIU_CR_100 0x40 /* 100 Ohms, external term */
! 213: /* Digital Transmitter (XMTR) */
! 214: #define Bt8370_TCR0 0x070 /* Transmit Framer Configuration */
! 215: #define TCR0_FAS 0x00 /* FAS Only */
! 216: #define TCR0_MFAS 0x04 /* FAS + MFAS*/
! 217: #define TCR0_SF 0x04 /* SF Only */
! 218: #define TCR0_ESF 0x01 /* ESF Only */
! 219: #define TCR0_ESFCRC 0x0D /* ESF + Force CRC */
! 220: #define Bt8370_TCR1 0x071 /* Transmitter Configuration */
! 221: #define TCR1_TABORT 0x40 /* Disable TX Offline Framer */
! 222: #define TCR1_TFORCE 0x20 /* Force TX Reframe */
! 223: #define TCR1_HDB3 0x01 /* Line code HDB3 */
! 224: #define TCR1_B8ZS 0x01 /* Line code B8ZS */
! 225: #define TCR1_AMI 0x00 /* Line code AMI */
! 226: #define TCR1_3FAS 0x10 /* 3 consecutive FAS Errors */
! 227: #define TCR1_26F 0x10 /* 2 out of 6 Frame Bit Errors */
! 228: #define Bt8370_TFRM 0x072 /* Transmit Frame Format */
! 229: #define TFRM_MYEL 0x20 /* Insert MultiFrame Yellow Alarm */
! 230: #define TFRM_YEL 0x10 /* Insert Yellow Alarm */
! 231: #define TFRM_MF 0x08 /* Insert MultiFrame Alignment */
! 232: #define TFRM_FE 0x04 /* Insert FEBE */
! 233: #define TFRM_CRC 0x02 /* Insert CRC4 */
! 234: #define TFRM_FBIT 0x01 /* Insert F bit or FAS/NAS alignment */
! 235: #define Bt8370_TERROR 0x073 /* Transmit Error Insert */
! 236: #define Bt8370_TMAN 0x074 /* Transmit Manual Sa-Byte/FEBE Configuration */
! 237: #define TMAN_MALL 0xF8 /* All Sa Bytes Manual */
! 238: #define Bt8370_TALM 0x075 /* Transmit Alarm Signal Configuration */
! 239: #define TALM_AMYEL 0x20 /* Automatic MultiFrame Yellow Alarm transmit */
! 240: #define TALM_AYEL 0x10 /* Automatic Yellow Alarm transmit */
! 241: #define TALM_AAIS 0x08 /* Automatic AIS Alarm transmit */
! 242: #define Bt8370_TPATT 0x076 /* Transmit Test Pattern Configuration */
! 243: #define Bt8370_TLB 0x077 /* Transmit Inband Loopback Code Configuration */
! 244: #define Bt8370_LBP 0x078 /* Transmit Inband Loopback Code Pattern */
! 245: /* Transmit Sa-Byte */
! 246: #define Bt8370_TSA4 0x07B /* Transmit Sa4 Byte Buffer */
! 247: #define Bt8370_TSA5 0x07C /* ditto Sa5 */
! 248: #define Bt8370_TSA6 0x07D /* ditto Sa6 */
! 249: #define Bt8370_TSA7 0x07E /* ditto Sa7 */
! 250: #define Bt8370_TSA8 0x07F /* ditto Sa8 */
! 251: /* Clock Rate Adapter (CLAD) */
! 252: #define Bt8370_CLAD_CR 0x090 /* Clock Rate Adapter Configuration */
! 253: #define CLAD_CR_CEN 0x80 /* Enable CLAD phase detector */
! 254: #define CLAD_CR_XSEL_1X 0x00 /* Line rate multiplier 1X */
! 255: #define CLAD_CR_XSEL_2X 0x10 /* Line rate multiplier 2X */
! 256: #define CLAD_CR_XSEL_4X 0x20 /* Line rate multiplier 4X */
! 257: #define CLAD_CR_XSEL_8X 0x30 /* Line rate multiplier 8X */
! 258: #define CLAD_CR_LFGAIN 0x05 /* Loop filter gain */
! 259: #define Bt8370_CSEL 0x091 /* CLAD Frequency Select */
! 260: #define CSEL_VSEL_1536 0x60 /* 1536kHz */
! 261: #define CSEL_VSEL_1544 0x50 /* 1544kHz */
! 262: #define CSEL_VSEL_2048 0x10 /* 2048kHz */
! 263: #define CSEL_VSEL_4096 0x20 /* 4096kHz */
! 264: #define CSEL_VSEL_8192 0x30 /* 8192kHz */
! 265: #define CSEL_OSEL_1536 0x06 /* 1536kHz */
! 266: #define CSEL_OSEL_1544 0x05 /* 1544kHz */
! 267: #define CSEL_OSEL_2048 0x01 /* 2048kHz */
! 268: #define CSEL_OSEL_4096 0x02 /* 4096kHz */
! 269: #define CSEL_OSEL_8192 0x03 /* 8192kHz */
! 270: #define Bt8370_CPHASE 0x092 /* CLAD Phase Detector Scale Factor */
! 271: #define Bt8370_CTEST 0x093 /* CLAD Test */
! 272: /* Bit Oriented Protocol Transceiver (BOP) */
! 273: #define Bt8370_BOP 0x0A0 /* Bit Oriented Protocol Transceiver */
! 274: #define Bt8370_TBOP 0x0A1 /* Transmit BOP Code Word */
! 275: #define Bt8370_RBOP 0x0A2 /* Receive BOP Code Word */
! 276: #define Bt8370_BOP_STAT 0x0A3 /* BOP Status */
! 277: /* Data Link #1 */
! 278: #define Bt8370_DL1_TS 0x0A4 /* DL1 Time Slot Enable */
! 279: #define Bt8370_DL1_BIT 0x0A5 /* DL1 Bit Enable */
! 280: #define Bt8370_DL1_CTL 0x0A6 /* DL1 Control */
! 281: #define Bt8370_RDL1_FFC 0x0A7 /* RDL #1 FIFO Fill Control */
! 282: #define Bt8370_RDL1 0x0A8 /* Receive Data Link FIFO #1 */
! 283: #define Bt8370_RDL1_STAT 0x0A9 /* RDL #1 Status */
! 284: #define Bt8370_PRM1 0x0AA /* Performance Report Message */
! 285: #define Bt8370_TDL1_FEC 0x0AB /* TDL #1 FIFO Empty Control */
! 286: #define Bt8370_TDL1_EOM 0x0AC /* TDL #1 End of Message Control */
! 287: #define Bt8370_TDL1 0x0AD /* Transmit Data Link FIFO #1*/
! 288: #define Bt8370_TDL1_STAT 0x0AE /* TDL #1 Status */
! 289: /* Data Link #2 */
! 290: #define Bt8370_DL2_TS 0x0AF /* DL2 Time Slot Enable */
! 291: #define Bt8370_DL2_BIT 0x0B0 /* DL2 Bit Enable */
! 292: #define Bt8370_DL2_CTL 0x0B1 /* DL2 Control */
! 293: #define Bt8370_RDL2_FFC 0x0B2 /* RDL #2 FIFO Fill Control */
! 294: #define Bt8370_RDL2 0x0B3 /* Receive Data Link FIFO #2 */
! 295: #define Bt8370_RDL2_STAT 0x0B4 /* RDL #2 Status */
! 296: #define Bt8370_TDL2_FEC 0x0B6 /* TDL #2 FIFO Empty Control */
! 297: #define Bt8370_TDL2_EOM 0x0B7 /* TDL #2 End of Message Control */
! 298: #define Bt8370_TDL2 0x0B8 /* Transmit Data Link FIFO #2*/
! 299: #define Bt8370_TDL2_STAT 0x0B9 /* TDL #2 Status */
! 300: /* Test */
! 301: #define Bt8370_TEST1 0x0BA /* DLINK Test Configuration */
! 302: #define Bt8370_TEST2 0x0BB /* DLINK Test Status */
! 303: #define Bt8370_TEST3 0x0BC /* DLINK Test Status */
! 304: #define Bt8370_TEST4 0x0BD /* DLINK Test Control #1 or Configuration #2 */
! 305: #define Bt8370_TEST5 0x0BE /* DLINK Test Control #2 or Configuration #2 */
! 306: /* System Bus Interface (SBI) */
! 307: #define Bt8370_SBI_CR 0x0D0 /* System Bus Interface Configuration */
! 308: #define SBI_CR_X2CLK 0x80 /* Times 2 clock */
! 309: #define SBI_CR_SBI_OE 0x40 /* Enable SBI */
! 310: #define SBI_CR_1536 0x08 /* 1536, 24TS*/
! 311: #define SBI_CR_1544 0x07 /* 1544, 24TS + F bit */
! 312: #define SBI_CR_2048 0x06 /* 2048, 32TS */
! 313: #define SBI_CR_4096_A 0x04 /* 4096 Group A */
! 314: #define SBI_CR_4096_B 0x05 /* 4096 Group B */
! 315: #define SBI_CR_8192_A 0x00 /* 8192 Group A */
! 316: #define SBI_CR_8192_B 0x01 /* 8192 Group B */
! 317: #define SBI_CR_8192_C 0x02 /* 8192 Group C */
! 318: #define SBI_CR_8192_D 0x03 /* 8192 Group D */
! 319: #define Bt8370_RSB_CR 0x0D1 /* Receive System Bus Configuration */
! 320: #define RSB_CR_BUS_RSB 0x80 /* Multiple devices on bus */
! 321: #define RSB_CR_SIG_OFF 0x40 /* Inhibit RPCMO Signal reinsertion */
! 322: #define RSB_CR_RPCM_NEG 0x20 /* RSB falling edge */
! 323: #define RSB_CR_RSYN_NEG 0x10 /* RFSYNC falling edge */
! 324: #define RSB_CR_BUS_FRZ 0x08 /* Multiple devices on bus */
! 325: #define RSB_CR_RSB_CTR 0x04 /* Force RSLIP Center */
! 326: #define RSB_CR_RSBI_NORMAL 0x00 /* Normal Slip Buffer Mode */
! 327: #define RSB_CR_RSBI_ELASTIC 0x02 /* Receive Slip Buffer Elastic Mode */
! 328: #define RSB_CR_RSBI_BYPASS 0x03 /* Bypass Slip Buffer */
! 329: #define Bt8370_RSYNC_BIT 0x0D2 /* Receive System Bus Sync Bit Offset */
! 330: #define Bt8370_RSYNC_TS 0x0D3 /* Receive System Bus Sync Time Slot Offset */
! 331: #define Bt8370_TSB_CR 0x0D4 /* Transmit System Bus Configuration */
! 332: #define TSB_CR_BUS_TSB 0x80 /* Bused TSB output */
! 333: #define TSB_CR_TPCM_NEG 0x20 /* TINDO falling edge */
! 334: #define TSB_CR_TSYN_NEG 0x10 /* TFSYNC falling edge */
! 335: #define TSB_CR_TSB_CTR 0x04 /* Force TSLIP Center */
! 336: #define TSB_CR_TSB_NORMAL 0x00 /* Normal Slip Buffer Mode */
! 337: #define TSB_CR_TSB_ELASTIC 0x02 /* Send Slip Buffer Elastic Mode */
! 338: #define TSB_CR_TSB_BYPASS 0x03 /* Bypass Slip Buffer */
! 339: #define Bt8370_TSYNC_BIT 0x0D5 /* Transmit System Bus Sync Bit Offset */
! 340: #define Bt8370_TSYNC_TS 0x0D6 /* Transmit System Bus Sync Time Slot Offset */
! 341: #define Bt8370_RSIG_CR 0x0D7 /* Receive Signaling Configuration */
! 342: #define RSIG_CR_FRZ_OFF 0x04 /* Manual Signaling Update FRZ */
! 343: #define RSIG_CR_THRU 0x01 /* Transparent Robbed Bit Signaling */
! 344: #define Bt8370_RSYNC_FRM 0x0D8 /* Signaling Reinsertion Frame Offset */
! 345: #define Bt8370_SSTAT 0x0D9 /* Slip Buffer Status */
! 346: #define SSTAT_TSDIR 0x80 /* Transmit Slip Direction */
! 347: #define SSTAT_TFSLIP 0x40 /* Controlled Slip Event */
! 348: #define SSTAT_TUSLIP 0x20 /* Uncontrolled Slip Event */
! 349: #define SSTAT_RSDIR 0x08 /* Receive Slip Direction */
! 350: #define SSTAT_RFSLIP 0x04 /* Controlled Slip Event */
! 351: #define SSTAT_RUSLIP 0x02 /* Uncontrolled Slip Event */
! 352: #define Bt8370_STACK 0x0DA /* Receive Signaling Stack */
! 353: #define Bt8370_RPHASE 0x0DB /* RSLIP Phase Status */
! 354: #define Bt8370_TPHASE 0x0DC /* TSLIP Phase Status */
! 355: #define Bt8370_PERR 0x0DD /* RAM Parity Status */
! 356: #define Bt8370_SBCn 0x0E0 /* -0FF *//* System Bus Per-Channel Control */
! 357: #define SBCn_INSERT 0x40 /* Insert RX Signaling on RPCMO */
! 358: #define SBCn_SIG_LP 0x20 /* Local Signaling Loopback */
! 359: #define SBCn_RLOOP 0x10 /* Local Loopback */
! 360: #define SBCn_RINDO 0x08 /* Activate RINDO time slot indicator */
! 361: #define SBCn_TINDO 0x04 /* Activate TINDO time slot indicator */
! 362: #define SBCn_TSIG_AB 0x02 /* AB Signaling */
! 363: #define SBCn_ASSIGN 0x01 /* Enable System Bus Time Slot */
! 364: /* Buffer Memory */
! 365: #define Bt8370_TPCn 0x100 /* Transmit Per-Channel Control */
! 366: #define TPCn_CLEAR 0x00 /* Clear Channel Mode */
! 367: #define TPCn_EMFBIT 0x80 /* TB7ZS/EMFBIT */
! 368: #define TPCn_TLOOP 0x40 /* Remote DS0 Channel Loopback */
! 369: #define TPCn_TIDLE 0x20 /* Transmit Idle */
! 370: #define TPCn_TLOCAL 0x10 /* Transmit Local Signaling */
! 371: #define TPCn_TSIGA 0x08 /* ABCD signaling value */
! 372: #define TPCn_TSIGB 0x04 /* ABCD signaling value */
! 373: #define TPCn_TSIGC 0x02 /* ABCD signaling value */
! 374: #define TPCn_TSIGD 0x01 /* ABCD signaling value */
! 375: #define TPCn_TSIGO TPCn_TSIGA /* Transmit Signaling Output */
! 376: #define TPCn_RSIGO TPCn_TSIGB /* Receive Signaling Output */
! 377: #define Bt8370_TSIGn 0x120 /* Transmit Signaling Buffer */
! 378: #define Bt8370_TSLIP_LOn 0x140 /* Transmit PCM Slip Buffer */
! 379: #define Bt8370_TSLIP_HIn 0x160 /* Transmit PCM Slip Buffer */
! 380: #define Bt8370_RPCn 0x180 /* Receive Per-Channel Control */
! 381: #define RPCn_CLEAR 0x00 /* Clear Channel Mode */
! 382: #define RPCn_RSIG_AB 0x80 /* AB Signaling */
! 383: #define RPCn_RIDLE 0x40 /* Time Slot Idle */
! 384: #define RPCn_SIG_STK 0x20 /* Receive Signal Stack */
! 385: #define RPCn_RLOCAL 0x10 /* Enable Local Signaling Output */
! 386: #define RPCn_RSIGA 0x08 /* Local Receive Signaling */
! 387: #define RPCn_RSIGB 0x04 /* Local Receive Signaling */
! 388: #define RPCn_RSIGC 0x02 /* Local Receive Signaling */
! 389: #define RPCn_RSIGD 0x01 /* Local Receive Signaling */
! 390: #define Bt8370_RSIGn 0x1A0 /* Receive Signaling Buffer */
! 391: #define Bt8370_RSLIP_LOn 0x1C0 /* Receive PCM Slip Buffer */
! 392: #define Bt8370_RSLIP_HIn 0x1E0 /* Receive PCM Slip Buffer */
CVSweb