Annotation of sys/dev/pci/ichreg.h, Revision 1.1.1.1
1.1 nbrk 1: /* $OpenBSD: ichreg.h,v 1.7 2005/12/18 12:09:04 grange Exp $ */
2:
3: /*
4: * Copyright (c) 2004, 2005 Alexander Yurchenko <grange@openbsd.org>
5: *
6: * Permission to use, copy, modify, and distribute this software for any
7: * purpose with or without fee is hereby granted, provided that the above
8: * copyright notice and this permission notice appear in all copies.
9: *
10: * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
11: * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
12: * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
13: * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
14: * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
15: * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
16: * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
17: */
18:
19: #ifndef _DEV_PCI_ICHREG_H_
20: #define _DEV_PCI_ICHREG_H_
21:
22: /*
23: * Intel I/O Controller Hub (ICH) register definitions.
24: */
25:
26: /*
27: * LPC interface bridge registers.
28: */
29:
30: /* PCI configuration registers */
31: #define ICH_PMBASE 0x40 /* ACPI base address */
32: #define ICH_ACPI_CNTL 0x44 /* ACPI control */
33: #define ICH_ACPI_CNTL_ACPI_EN (1 << 4) /* ACPI enable */
34: #define ICH_GEN_PMCON1 0xa0 /* general PM configuration */
35: /* ICHx-M only */
36: #define ICH_GEN_PMCON1_SS_EN 0x08 /* enable SpeedStep */
37:
38: /* Power management I/O registers */
39: #define ICH_PM_TMR 0x08 /* PM timer */
40: /* ICHx-M only */
41: #define ICH_PM_CNTL 0x20 /* power management control */
42: #define ICH_PM_ARB_DIS 0x01 /* disable arbiter */
43: #define ICH_PM_SS_CNTL 0x50 /* SpeedStep control */
44: #define ICH_PM_SS_STATE_LOW 0x01 /* low power state */
45:
46: #define ICH_PMSIZE 128 /* ACPI I/O space size */
47:
48: /*
49: * SMBus controller registers.
50: */
51:
52: /* PCI configuration registers */
53: #define ICH_SMB_BASE 0x20 /* SMBus base address */
54: #define ICH_SMB_HOSTC 0x40 /* host configuration */
55: #define ICH_SMB_HOSTC_HSTEN (1 << 0) /* enable host controller */
56: #define ICH_SMB_HOSTC_SMIEN (1 << 1) /* generate SMI */
57: #define ICH_SMB_HOSTC_I2CEN (1 << 2) /* enable I2C commands */
58:
59: /* SMBus I/O registers */
60: #define ICH_SMB_HS 0x00 /* host status */
61: #define ICH_SMB_HS_BUSY (1 << 0) /* running a command */
62: #define ICH_SMB_HS_INTR (1 << 1) /* command completed */
63: #define ICH_SMB_HS_DEVERR (1 << 2) /* command error */
64: #define ICH_SMB_HS_BUSERR (1 << 3) /* transaction collision */
65: #define ICH_SMB_HS_FAILED (1 << 4) /* failed bus transaction */
66: #define ICH_SMB_HS_SMBAL (1 << 5) /* SMBALERT# asserted */
67: #define ICH_SMB_HS_INUSE (1 << 6) /* bus semaphore */
68: #define ICH_SMB_HS_BDONE (1 << 7) /* byte received/transmitted */
69: #define ICH_SMB_HS_BITS "\020\001BUSY\002INTR\003DEVERR\004BUSERR\005FAILED\006SMBAL\007INUSE\010BDONE"
70: #define ICH_SMB_HC 0x02 /* host control */
71: #define ICH_SMB_HC_INTREN (1 << 0) /* enable interrupts */
72: #define ICH_SMB_HC_KILL (1 << 1) /* kill current transaction */
73: #define ICH_SMB_HC_CMD_QUICK (0 << 2) /* QUICK command */
74: #define ICH_SMB_HC_CMD_BYTE (1 << 2) /* BYTE command */
75: #define ICH_SMB_HC_CMD_BDATA (2 << 2) /* BYTE DATA command */
76: #define ICH_SMB_HC_CMD_WDATA (3 << 2) /* WORD DATA command */
77: #define ICH_SMB_HC_CMD_PCALL (4 << 2) /* PROCESS CALL command */
78: #define ICH_SMB_HC_CMD_BLOCK (5 << 2) /* BLOCK command */
79: #define ICH_SMB_HC_CMD_I2CREAD (6 << 2) /* I2C READ command */
80: #define ICH_SMB_HC_CMD_BLOCKP (7 << 2) /* BLOCK PROCESS command */
81: #define ICH_SMB_HC_LASTB (1 << 5) /* last byte in block */
82: #define ICH_SMB_HC_START (1 << 6) /* start transaction */
83: #define ICH_SMB_HC_PECEN (1 << 7) /* enable PEC */
84: #define ICH_SMB_HCMD 0x03 /* host command */
85: #define ICH_SMB_TXSLVA 0x04 /* transmit slave address */
86: #define ICH_SMB_TXSLVA_READ (1 << 0) /* read direction */
87: #define ICH_SMB_TXSLVA_ADDR(x) (((x) & 0x7f) << 1) /* 7-bit address */
88: #define ICH_SMB_HD0 0x05 /* host data 0 */
89: #define ICH_SMB_HD1 0x06 /* host data 1 */
90: #define ICH_SMB_HBDB 0x07 /* host block data byte */
91: #define ICH_SMB_PEC 0x08 /* PEC data */
92: #define ICH_SMB_RXSLVA 0x09 /* receive slave address */
93: #define ICH_SMB_SD 0x0a /* receive slave data */
94: #define ICH_SMB_SD_MSG0(x) ((x) & 0xff) /* data message byte 0 */
95: #define ICH_SMB_SD_MSG1(x) ((x) >> 8) /* data message byte 1 */
96: #define ICH_SMB_AS 0x0c /* auxiliary status */
97: #define ICH_SMB_AS_CRCE (1 << 0) /* CRC error */
98: #define ICH_SMB_AS_TCO (1 << 1) /* advanced TCO mode */
99: #define ICH_SMB_AC 0x0d /* auxiliary control */
100: #define ICH_SMB_AC_AAC (1 << 0) /* automatically append CRC */
101: #define ICH_SMB_AC_E32B (1 << 1) /* enable 32-byte buffer */
102: #define ICH_SMB_SMLPC 0x0e /* SMLink pin control */
103: #define ICH_SMB_SMLPC_LINK0 (1 << 0) /* SMLINK0 pin state */
104: #define ICH_SMB_SMLPC_LINK1 (1 << 1) /* SMLINK1 pin state */
105: #define ICH_SMB_SMLPC_CLKC (1 << 2) /* SMLINK0 pin is untouched */
106: #define ICH_SMB_SMBPC 0x0f /* SMBus pin control */
107: #define ICH_SMB_SMBPC_CLK (1 << 0) /* SMBCLK pin state */
108: #define ICH_SMB_SMBPC_DATA (1 << 1) /* SMBDATA pin state */
109: #define ICH_SMB_SMBPC_CLKC (1 << 2) /* SMBCLK pin is untouched */
110: #define ICH_SMB_SS 0x10 /* slave status */
111: #define ICH_SMB_SS_HN (1 << 0) /* Host Notify command */
112: #define ICH_SMB_SCMD 0x11 /* slave command */
113: #define ICH_SMB_SCMD_INTREN (1 << 0) /* enable interrupts on HN */
114: #define ICH_SMB_SCMD_WKEN (1 << 1) /* wake on HN */
115: #define ICH_SMB_SCMD_SMBALDS (1 << 2) /* disable SMBALERT# intr */
116: #define ICH_SMB_NDADDR 0x14 /* notify device address */
117: #define ICH_SMB_NDADDR_ADDR(x) ((x) >> 1) /* 7-bit address */
118: #define ICH_SMB_NDLOW 0x16 /* notify data low byte */
119: #define ICH_SMB_NDHIGH 0x17 /* notify data high byte */
120:
121: /*
122: * 6300ESB watchdog timer registers.
123: */
124:
125: /* PCI configuration registers */
126: #define ICH_WDT_BASE 0x10 /* memory space base address */
127: #define ICH_WDT_CONF 0x60 /* configuration register */
128: #define ICH_WDT_CONF_MASK 0xffff /* 16-bit register */
129: #define ICH_WDT_CONF_INT_MASK 0x3 /* interrupt type */
130: #define ICH_WDT_CONF_INT_IRQ 0x0 /* IRQ (APIC 1, INT 10) */
131: #define ICH_WDT_CONF_INT_SMI 0x2 /* SMI */
132: #define ICH_WDT_CONF_INT_DIS 0x3 /* disabled */
133: #define ICH_WDT_CONF_PRE (1 << 2) /* 2^5 clock divisor */
134: #define ICH_WDT_CONF_OUTDIS (1 << 5) /* WDT_TOUT# output disabled */
135: #define ICH_WDT_LOCK 0x68 /* lock register */
136: #define ICH_WDT_LOCK_LOCKED (1 << 0) /* register locked */
137: #define ICH_WDT_LOCK_ENABLED (1 << 1) /* WDT enabled */
138: #define ICH_WDT_LOCK_FREERUN (1 << 2) /* free running mode */
139:
140: /* Memory mapped registers */
141: #define ICH_WDT_PRE1 0x00 /* preload value 1 */
142: #define ICH_WDT_PRE2 0x04 /* preload value 2 */
143: #define ICH_WDT_GIS 0x08 /* general interrupt status */
144: #define ICH_WDT_GIS_ACTIVE (1 << 0) /* interrupt active */
145: #define ICH_WDT_RELOAD 0x0c /* reload register */
146: #define ICH_WDT_RELOAD_RLD (1 << 8) /* safe reload */
147: #define ICH_WDT_RELOAD_TIMEOUT (1 << 9) /* timeout occured */
148:
149: #endif /* !_DEV_PCI_ICHREG_H_ */
CVSweb