Annotation of sys/dev/pci/if_lmc_media.c, Revision 1.1
1.1 ! nbrk 1: /* $OpenBSD: if_lmc_media.c,v 1.16 2005/11/07 00:29:21 brad Exp $ */
! 2: /* $Id: if_lmc_media.c,v 1.16 2005/11/07 00:29:21 brad Exp $ */
! 3:
! 4: /*-
! 5: * Copyright (c) 1997-1999 LAN Media Corporation (LMC)
! 6: * All rights reserved. www.lanmedia.com
! 7: *
! 8: * This code is written by Michael Graff <graff@vix.com> for LMC.
! 9: * The code is derived from permitted modifications to software created
! 10: * by Matt Thomas (matt@3am-software.com).
! 11: *
! 12: * Redistribution and use in source and binary forms, with or without
! 13: * modification, are permitted provided that the following conditions
! 14: * are met:
! 15: * 1. Redistributions of source code must retain the above copyright
! 16: * notice, this list of conditions and the following disclaimer.
! 17: * 2. Redistributions in binary form must reproduce the above
! 18: * copyright notice, this list of conditions and the following disclaimer
! 19: * in the documentation and/or other materials provided with the
! 20: * distribution.
! 21: * 3. All marketing or advertising materials mentioning features or
! 22: * use of this software must display the following acknowledgement:
! 23: * This product includes software developed by LAN Media Corporation
! 24: * and its contributors.
! 25: * 4. Neither the name of LAN Media Corporation nor the names of its
! 26: * contributors may be used to endorse or promote products derived
! 27: * from this software without specific prior written permission.
! 28: *
! 29: * THIS SOFTWARE IS PROVIDED BY LAN MEDIA CORPORATION AND CONTRIBUTORS
! 30: * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
! 31: * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
! 32: * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
! 33: * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
! 34: * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
! 35: * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
! 36: * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
! 37: * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
! 38: * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
! 39: * THE POSSIBILITY OF SUCH DAMAGE.
! 40: */
! 41:
! 42: #include "bpfilter.h"
! 43:
! 44: #include <sys/param.h>
! 45: #include <sys/systm.h>
! 46: #include <sys/mbuf.h>
! 47: #include <sys/socket.h>
! 48: #include <sys/ioctl.h>
! 49: #include <sys/errno.h>
! 50: #include <sys/malloc.h>
! 51: #include <sys/kernel.h>
! 52: #include <sys/proc.h> /* only for declaration of wakeup() used by vm.h */
! 53: #include <sys/device.h>
! 54:
! 55: #include <dev/pci/pcidevs.h>
! 56:
! 57: #include <net/if.h>
! 58: #include <net/if_types.h>
! 59: #include <net/if_dl.h>
! 60: #include <net/netisr.h>
! 61:
! 62: #if NBPFILTER > 0
! 63: #include <net/bpf.h>
! 64: #endif
! 65:
! 66: #include <net/if_sppp.h>
! 67:
! 68: #include <machine/bus.h>
! 69:
! 70: #include <dev/pci/pcireg.h>
! 71: #include <dev/pci/pcivar.h>
! 72: #include <dev/ic/dc21040reg.h>
! 73:
! 74: #include <dev/pci/if_lmc_types.h>
! 75: #include <dev/pci/if_lmcioctl.h>
! 76: #include <dev/pci/if_lmcvar.h>
! 77:
! 78: /*
! 79: * For lack of a better place, put the T1 cable stuff here.
! 80: */
! 81: char *lmc_t1_cables[] = {
! 82: "V.10/RS423", "EIA530A", "reserved", "X.21", "V.35",
! 83: "EIA449/EIA530/V.36", "V.28/EIA232", "none", NULL
! 84: };
! 85:
! 86: /*
! 87: * protocol independent method.
! 88: */
! 89: static void lmc_set_protocol(lmc_softc_t * const, lmc_ctl_t *);
! 90:
! 91: /*
! 92: * media independent methods to check on media status, link, light LEDs,
! 93: * etc.
! 94: */
! 95: static void lmc_ds3_init(lmc_softc_t * const);
! 96: static void lmc_ds3_default(lmc_softc_t * const);
! 97: static void lmc_ds3_set_status(lmc_softc_t * const, lmc_ctl_t *);
! 98: static void lmc_ds3_set_100ft(lmc_softc_t * const, int);
! 99: static int lmc_ds3_get_link_status(lmc_softc_t * const);
! 100: static void lmc_ds3_set_crc_length(lmc_softc_t * const, int);
! 101: static void lmc_ds3_set_scram(lmc_softc_t * const, int);
! 102: static void lmc_ds3_watchdog(lmc_softc_t * const);
! 103:
! 104: static void lmc_hssi_init(lmc_softc_t * const);
! 105: static void lmc_hssi_default(lmc_softc_t * const);
! 106: static void lmc_hssi_set_status(lmc_softc_t * const, lmc_ctl_t *);
! 107: static void lmc_hssi_set_clock(lmc_softc_t * const, int);
! 108: static int lmc_hssi_get_link_status(lmc_softc_t * const);
! 109: static void lmc_hssi_set_link_status(lmc_softc_t * const, int);
! 110: static void lmc_hssi_set_crc_length(lmc_softc_t * const, int);
! 111: static void lmc_hssi_watchdog(lmc_softc_t * const);
! 112:
! 113: static void lmc_ssi_init(lmc_softc_t * const);
! 114: static void lmc_ssi_default(lmc_softc_t * const);
! 115: static void lmc_ssi_set_status(lmc_softc_t * const, lmc_ctl_t *);
! 116: static void lmc_ssi_set_clock(lmc_softc_t * const, int);
! 117: static void lmc_ssi_set_speed(lmc_softc_t * const, lmc_ctl_t *);
! 118: static int lmc_ssi_get_link_status(lmc_softc_t * const);
! 119: static void lmc_ssi_set_link_status(lmc_softc_t * const, int);
! 120: static void lmc_ssi_set_crc_length(lmc_softc_t * const, int);
! 121: static void lmc_ssi_watchdog(lmc_softc_t * const);
! 122:
! 123: static void lmc_t1_init(lmc_softc_t * const);
! 124: static void lmc_t1_default(lmc_softc_t * const);
! 125: static void lmc_t1_set_status(lmc_softc_t * const, lmc_ctl_t *);
! 126: static int lmc_t1_get_link_status(lmc_softc_t * const);
! 127: static void lmc_t1_set_circuit_type(lmc_softc_t * const, int);
! 128: static void lmc_t1_set_crc_length(lmc_softc_t * const, int);
! 129: static void lmc_t1_set_clock(lmc_softc_t * const, int);
! 130: static void lmc_t1_watchdog(lmc_softc_t * const);
! 131:
! 132: static void lmc_dummy_set_1(lmc_softc_t * const, int);
! 133: static void lmc_dummy_set2_1(lmc_softc_t * const, lmc_ctl_t *);
! 134:
! 135: static inline void write_av9110_bit(lmc_softc_t *, int);
! 136: static void write_av9110(lmc_softc_t *, u_int32_t, u_int32_t, u_int32_t,
! 137: u_int32_t, u_int32_t);
! 138:
! 139: lmc_media_t lmc_ds3_media = {
! 140: lmc_ds3_init, /* special media init stuff */
! 141: lmc_ds3_default, /* reset to default state */
! 142: lmc_ds3_set_status, /* reset status to state provided */
! 143: lmc_dummy_set_1, /* set clock source */
! 144: lmc_dummy_set2_1, /* set line speed */
! 145: lmc_ds3_set_100ft, /* set cable length */
! 146: lmc_ds3_set_scram, /* set scrambler */
! 147: lmc_ds3_get_link_status, /* get link status */
! 148: lmc_dummy_set_1, /* set link status */
! 149: lmc_ds3_set_crc_length, /* set CRC length */
! 150: lmc_dummy_set_1, /* set T1 or E1 circuit type */
! 151: lmc_ds3_watchdog
! 152: };
! 153:
! 154: lmc_media_t lmc_hssi_media = {
! 155: lmc_hssi_init, /* special media init stuff */
! 156: lmc_hssi_default, /* reset to default state */
! 157: lmc_hssi_set_status, /* reset status to state provided */
! 158: lmc_hssi_set_clock, /* set clock source */
! 159: lmc_dummy_set2_1, /* set line speed */
! 160: lmc_dummy_set_1, /* set cable length */
! 161: lmc_dummy_set_1, /* set scrambler */
! 162: lmc_hssi_get_link_status, /* get link status */
! 163: lmc_hssi_set_link_status, /* set link status */
! 164: lmc_hssi_set_crc_length, /* set CRC length */
! 165: lmc_dummy_set_1, /* set T1 or E1 circuit type */
! 166: lmc_hssi_watchdog
! 167: };
! 168:
! 169: lmc_media_t lmc_ssi_media = {
! 170: lmc_ssi_init, /* special media init stuff */
! 171: lmc_ssi_default, /* reset to default state */
! 172: lmc_ssi_set_status, /* reset status to state provided */
! 173: lmc_ssi_set_clock, /* set clock source */
! 174: lmc_ssi_set_speed, /* set line speed */
! 175: lmc_dummy_set_1, /* set cable length */
! 176: lmc_dummy_set_1, /* set scrambler */
! 177: lmc_ssi_get_link_status, /* get link status */
! 178: lmc_ssi_set_link_status, /* set link status */
! 179: lmc_ssi_set_crc_length, /* set CRC length */
! 180: lmc_dummy_set_1, /* set T1 or E1 circuit type */
! 181: lmc_ssi_watchdog
! 182: };
! 183:
! 184: lmc_media_t lmc_t1_media = {
! 185: lmc_t1_init, /* special media init stuff */
! 186: lmc_t1_default, /* reset to default state */
! 187: lmc_t1_set_status, /* reset status to state provided */
! 188: lmc_t1_set_clock, /* set clock source */
! 189: lmc_dummy_set2_1, /* set line speed */
! 190: lmc_dummy_set_1, /* set cable length */
! 191: lmc_dummy_set_1, /* set scrambler */
! 192: lmc_t1_get_link_status, /* get link status */
! 193: lmc_dummy_set_1, /* set link status */
! 194: lmc_t1_set_crc_length, /* set CRC length */
! 195: lmc_t1_set_circuit_type, /* set T1 or E1 circuit type */
! 196: lmc_t1_watchdog
! 197: };
! 198:
! 199: static void
! 200: lmc_dummy_set_1(lmc_softc_t * const sc, int a)
! 201: {
! 202: }
! 203:
! 204: static void
! 205: lmc_dummy_set2_1(lmc_softc_t * const sc, lmc_ctl_t *a)
! 206: {
! 207: }
! 208:
! 209: /*
! 210: * HSSI methods
! 211: */
! 212:
! 213: static void
! 214: lmc_hssi_init(lmc_softc_t * const sc)
! 215: {
! 216: sc->ictl.cardtype = LMC_CTL_CARDTYPE_LMC5200;
! 217:
! 218: lmc_gpio_mkoutput(sc, LMC_GEP_HSSI_CLOCK);
! 219: }
! 220:
! 221: static void
! 222: lmc_hssi_default(lmc_softc_t * const sc)
! 223: {
! 224: sc->lmc_miireg16 = LMC_MII16_LED_ALL;
! 225:
! 226: sc->lmc_media->set_link_status(sc, LMC_LINK_DOWN);
! 227: sc->lmc_media->set_clock_source(sc, LMC_CTL_CLOCK_SOURCE_EXT);
! 228: sc->lmc_media->set_crc_length(sc, LMC_CTL_CRC_LENGTH_16);
! 229: }
! 230:
! 231: /*
! 232: * Given a user provided state, set ourselves up to match it. This will
! 233: * always reset the card if needed.
! 234: */
! 235: static void
! 236: lmc_hssi_set_status(lmc_softc_t * const sc, lmc_ctl_t *ctl)
! 237: {
! 238: if (ctl == NULL) {
! 239: sc->lmc_media->set_clock_source(sc, sc->ictl.clock_source);
! 240: lmc_set_protocol(sc, NULL);
! 241:
! 242: return;
! 243: }
! 244:
! 245: /*
! 246: * check for change in clock source
! 247: */
! 248: if (ctl->clock_source && !sc->ictl.clock_source) {
! 249: sc->lmc_media->set_clock_source(sc, LMC_CTL_CLOCK_SOURCE_INT);
! 250: sc->lmc_timing = LMC_CTL_CLOCK_SOURCE_INT;
! 251: } else if (!ctl->clock_source && sc->ictl.clock_source) {
! 252: sc->lmc_timing = LMC_CTL_CLOCK_SOURCE_EXT;
! 253: sc->lmc_media->set_clock_source(sc, LMC_CTL_CLOCK_SOURCE_EXT);
! 254: }
! 255:
! 256: lmc_set_protocol(sc, ctl);
! 257: }
! 258:
! 259: /*
! 260: * 1 == internal, 0 == external
! 261: */
! 262: static void
! 263: lmc_hssi_set_clock(lmc_softc_t * const sc, int ie)
! 264: {
! 265: if (ie == LMC_CTL_CLOCK_SOURCE_EXT) {
! 266: sc->lmc_gpio |= LMC_GEP_HSSI_CLOCK;
! 267: LMC_CSR_WRITE(sc, csr_gp, sc->lmc_gpio);
! 268: sc->ictl.clock_source = LMC_CTL_CLOCK_SOURCE_EXT;
! 269: printf(LMC_PRINTF_FMT ": clock external\n",
! 270: LMC_PRINTF_ARGS);
! 271: } else {
! 272: sc->lmc_gpio &= ~(LMC_GEP_HSSI_CLOCK);
! 273: LMC_CSR_WRITE(sc, csr_gp, sc->lmc_gpio);
! 274: sc->ictl.clock_source = LMC_CTL_CLOCK_SOURCE_INT;
! 275: printf(LMC_PRINTF_FMT ": clock internal\n",
! 276: LMC_PRINTF_ARGS);
! 277: }
! 278: }
! 279:
! 280: /*
! 281: * return hardware link status.
! 282: * 0 == link is down, 1 == link is up.
! 283: */
! 284: static int
! 285: lmc_hssi_get_link_status(lmc_softc_t * const sc)
! 286: {
! 287: u_int16_t link_status;
! 288:
! 289: link_status = lmc_mii_readreg(sc, 0, 16);
! 290:
! 291: if ((link_status & LMC_MII16_HSSI_CA) == LMC_MII16_HSSI_CA)
! 292: return 1;
! 293: else
! 294: return 0;
! 295: }
! 296:
! 297: static void
! 298: lmc_hssi_set_link_status(lmc_softc_t * const sc, int state)
! 299: {
! 300: if (state == LMC_LINK_UP)
! 301: sc->lmc_miireg16 |= LMC_MII16_HSSI_TA;
! 302: else
! 303: sc->lmc_miireg16 &= ~LMC_MII16_HSSI_TA;
! 304:
! 305: lmc_mii_writereg(sc, 0, 16, sc->lmc_miireg16);
! 306: }
! 307:
! 308: /*
! 309: * 0 == 16bit, 1 == 32bit
! 310: */
! 311: static void
! 312: lmc_hssi_set_crc_length(lmc_softc_t * const sc, int state)
! 313: {
! 314: if (state == LMC_CTL_CRC_LENGTH_32) {
! 315: /* 32 bit */
! 316: sc->lmc_miireg16 |= LMC_MII16_HSSI_CRC;
! 317: sc->ictl.crc_length = LMC_CTL_CRC_LENGTH_32;
! 318: } else {
! 319: /* 16 bit */
! 320: sc->lmc_miireg16 &= ~LMC_MII16_HSSI_CRC;
! 321: sc->ictl.crc_length = LMC_CTL_CRC_LENGTH_16;
! 322: }
! 323:
! 324: lmc_mii_writereg(sc, 0, 16, sc->lmc_miireg16);
! 325: }
! 326:
! 327: static void
! 328: lmc_hssi_watchdog (lmc_softc_t * const sc)
! 329: {
! 330: /* HSSI is blank */
! 331: }
! 332:
! 333: static void
! 334: lmc_ds3_watchdog (lmc_softc_t * const sc)
! 335: {
! 336: sc->lmc_miireg16 = lmc_mii_readreg (sc, 0, 16);
! 337: if (sc->lmc_miireg16 & 0x0018)
! 338: {
! 339: printf("%s: AIS Received\n", sc->lmc_xname);
! 340: lmc_led_on (sc, LMC_DS3_LED1 | LMC_DS3_LED2);
! 341: }
! 342: }
! 343:
! 344: /*
! 345: * DS3 methods
! 346: */
! 347:
! 348: /*
! 349: * Set cable length
! 350: */
! 351: static void
! 352: lmc_ds3_set_100ft(lmc_softc_t * const sc, int ie)
! 353: {
! 354: if (ie == LMC_CTL_CABLE_LENGTH_GT_100FT) {
! 355: sc->lmc_miireg16 &= ~LMC_MII16_DS3_ZERO;
! 356: sc->ictl.cable_length = LMC_CTL_CABLE_LENGTH_GT_100FT;
! 357: } else if (ie == LMC_CTL_CABLE_LENGTH_LT_100FT) {
! 358: sc->lmc_miireg16 |= LMC_MII16_DS3_ZERO;
! 359: sc->ictl.cable_length = LMC_CTL_CABLE_LENGTH_LT_100FT;
! 360: }
! 361: lmc_mii_writereg(sc, 0, 16, sc->lmc_miireg16);
! 362: }
! 363:
! 364: static void
! 365: lmc_ds3_default(lmc_softc_t * const sc)
! 366: {
! 367: sc->lmc_miireg16 = LMC_MII16_LED_ALL;
! 368:
! 369: sc->lmc_media->set_link_status(sc, LMC_LINK_DOWN);
! 370: sc->lmc_media->set_cable_length(sc, LMC_CTL_CABLE_LENGTH_LT_100FT);
! 371: sc->lmc_media->set_scrambler(sc, LMC_CTL_OFF);
! 372: sc->lmc_media->set_crc_length(sc, LMC_CTL_CRC_LENGTH_16);
! 373: }
! 374:
! 375: /*
! 376: * Given a user provided state, set ourselves up to match it. This will
! 377: * always reset the card if needed.
! 378: */
! 379: static void
! 380: lmc_ds3_set_status(lmc_softc_t * const sc, lmc_ctl_t *ctl)
! 381: {
! 382: if (ctl == NULL) {
! 383: sc->lmc_media->set_cable_length(sc, sc->ictl.cable_length);
! 384: sc->lmc_media->set_scrambler(sc, sc->ictl.scrambler_onoff);
! 385: lmc_set_protocol(sc, NULL);
! 386:
! 387: return;
! 388: }
! 389:
! 390: /*
! 391: * check for change in cable length setting
! 392: */
! 393: if (ctl->cable_length && !sc->ictl.cable_length)
! 394: lmc_ds3_set_100ft(sc, LMC_CTL_CABLE_LENGTH_GT_100FT);
! 395: else if (!ctl->cable_length && sc->ictl.cable_length)
! 396: lmc_ds3_set_100ft(sc, LMC_CTL_CABLE_LENGTH_LT_100FT);
! 397:
! 398: /*
! 399: * Check for change in scrambler setting (requires reset)
! 400: */
! 401: if (ctl->scrambler_onoff && !sc->ictl.scrambler_onoff)
! 402: lmc_ds3_set_scram(sc, LMC_CTL_ON);
! 403: else if (!ctl->scrambler_onoff && sc->ictl.scrambler_onoff)
! 404: lmc_ds3_set_scram(sc, LMC_CTL_OFF);
! 405:
! 406: lmc_set_protocol(sc, ctl);
! 407: }
! 408:
! 409: static void
! 410: lmc_ds3_init(lmc_softc_t * const sc)
! 411: {
! 412: int i;
! 413:
! 414: sc->ictl.cardtype = LMC_CTL_CARDTYPE_LMC5245;
! 415:
! 416: /* writes zeros everywhere */
! 417: for (i = 0 ; i < 21 ; i++) {
! 418: lmc_mii_writereg(sc, 0, 17, i);
! 419: lmc_mii_writereg(sc, 0, 18, 0);
! 420: }
! 421:
! 422: /* set some essential bits */
! 423: lmc_mii_writereg(sc, 0, 17, 1);
! 424: lmc_mii_writereg(sc, 0, 18, 0x05); /* ser, xtx */
! 425:
! 426: lmc_mii_writereg(sc, 0, 17, 5);
! 427: lmc_mii_writereg(sc, 0, 18, 0x80); /* emode */
! 428:
! 429: lmc_mii_writereg(sc, 0, 17, 14);
! 430: lmc_mii_writereg(sc, 0, 18, 0x30); /* rcgen, tcgen */
! 431:
! 432: /* clear counters and latched bits */
! 433: for (i = 0 ; i < 21 ; i++) {
! 434: lmc_mii_writereg(sc, 0, 17, i);
! 435: lmc_mii_readreg(sc, 0, 18);
! 436: }
! 437: }
! 438:
! 439: /*
! 440: * 1 == DS3 payload scrambled, 0 == not scrambled
! 441: */
! 442: static void
! 443: lmc_ds3_set_scram(lmc_softc_t * const sc, int ie)
! 444: {
! 445: if (ie == LMC_CTL_ON) {
! 446: sc->lmc_miireg16 |= LMC_MII16_DS3_SCRAM;
! 447: sc->ictl.scrambler_onoff = LMC_CTL_ON;
! 448: } else {
! 449: sc->lmc_miireg16 &= ~LMC_MII16_DS3_SCRAM;
! 450: sc->ictl.scrambler_onoff = LMC_CTL_OFF;
! 451: }
! 452: lmc_mii_writereg(sc, 0, 16, sc->lmc_miireg16);
! 453: }
! 454:
! 455: /*
! 456: * return hardware link status.
! 457: * 0 == link is down, 1 == link is up.
! 458: */
! 459: static int
! 460: lmc_ds3_get_link_status(lmc_softc_t * const sc)
! 461: {
! 462: u_int16_t link_status;
! 463:
! 464: lmc_mii_writereg(sc, 0, 17, 7);
! 465: link_status = lmc_mii_readreg(sc, 0, 18);
! 466:
! 467: if ((link_status & LMC_FRAMER_REG0_DLOS) == 0)
! 468: return 1;
! 469: else
! 470: return 0;
! 471: }
! 472:
! 473: /*
! 474: * 0 == 16bit, 1 == 32bit
! 475: */
! 476: static void
! 477: lmc_ds3_set_crc_length(lmc_softc_t * const sc, int state)
! 478: {
! 479: if (state == LMC_CTL_CRC_LENGTH_32) {
! 480: /* 32 bit */
! 481: sc->lmc_miireg16 |= LMC_MII16_DS3_CRC;
! 482: sc->ictl.crc_length = LMC_CTL_CRC_LENGTH_32;
! 483: } else {
! 484: /* 16 bit */
! 485: sc->lmc_miireg16 &= ~LMC_MII16_DS3_CRC;
! 486: sc->ictl.crc_length = LMC_CTL_CRC_LENGTH_16;
! 487: }
! 488:
! 489: lmc_mii_writereg(sc, 0, 16, sc->lmc_miireg16);
! 490: }
! 491:
! 492:
! 493: /*
! 494: * SSI methods
! 495: */
! 496:
! 497: static void
! 498: lmc_ssi_init(lmc_softc_t * const sc)
! 499: {
! 500: u_int16_t mii17;
! 501: int cable;
! 502:
! 503: sc->ictl.cardtype = LMC_CTL_CARDTYPE_LMC1000;
! 504:
! 505: mii17 = lmc_mii_readreg(sc, 0, 17);
! 506:
! 507: cable = (mii17 & LMC_MII17_SSI_CABLE_MASK) >> LMC_MII17_SSI_CABLE_SHIFT;
! 508: sc->ictl.cable_type = cable;
! 509:
! 510: lmc_gpio_mkoutput(sc, LMC_GEP_SSI_TXCLOCK);
! 511: }
! 512:
! 513: static void
! 514: lmc_ssi_default(lmc_softc_t * const sc)
! 515: {
! 516: sc->lmc_miireg16 = LMC_MII16_LED_ALL;
! 517:
! 518: /*
! 519: * make TXCLOCK always be an output
! 520: */
! 521: lmc_gpio_mkoutput(sc, LMC_GEP_SSI_TXCLOCK);
! 522:
! 523: sc->lmc_media->set_link_status(sc, LMC_LINK_DOWN);
! 524: sc->lmc_media->set_clock_source(sc, LMC_CTL_CLOCK_SOURCE_EXT);
! 525: sc->lmc_media->set_speed(sc, NULL);
! 526: sc->lmc_media->set_crc_length(sc, LMC_CTL_CRC_LENGTH_16);
! 527: }
! 528:
! 529: /*
! 530: * Given a user provided state, set ourselves up to match it. This will
! 531: * always reset the card if needed.
! 532: */
! 533: static void
! 534: lmc_ssi_set_status(lmc_softc_t * const sc, lmc_ctl_t *ctl)
! 535: {
! 536: if (ctl == NULL) {
! 537: sc->lmc_media->set_clock_source(sc, sc->ictl.clock_source);
! 538: sc->lmc_media->set_speed(sc, &sc->ictl);
! 539: lmc_set_protocol(sc, NULL);
! 540:
! 541: return;
! 542: }
! 543:
! 544: /*
! 545: * check for change in clock source
! 546: */
! 547: if (ctl->clock_source == LMC_CTL_CLOCK_SOURCE_INT
! 548: && sc->ictl.clock_source == LMC_CTL_CLOCK_SOURCE_EXT) {
! 549: sc->lmc_media->set_clock_source(sc, LMC_CTL_CLOCK_SOURCE_INT);
! 550: sc->lmc_timing = LMC_CTL_CLOCK_SOURCE_INT;
! 551: } else if (ctl->clock_source == LMC_CTL_CLOCK_SOURCE_EXT
! 552: && sc->ictl.clock_source == LMC_CTL_CLOCK_SOURCE_INT) {
! 553: sc->lmc_media->set_clock_source(sc, LMC_CTL_CLOCK_SOURCE_EXT);
! 554: sc->lmc_timing = LMC_CTL_CLOCK_SOURCE_EXT;
! 555: }
! 556:
! 557: if (ctl->clock_rate != sc->ictl.clock_rate)
! 558: sc->lmc_media->set_speed(sc, ctl);
! 559:
! 560: lmc_set_protocol(sc, ctl);
! 561: }
! 562:
! 563: /*
! 564: * 1 == internal, 0 == external
! 565: */
! 566: static void
! 567: lmc_ssi_set_clock(lmc_softc_t * const sc, int ie)
! 568: {
! 569: if (ie == LMC_CTL_CLOCK_SOURCE_EXT) {
! 570: sc->lmc_gpio &= ~(LMC_GEP_SSI_TXCLOCK);
! 571: LMC_CSR_WRITE(sc, csr_gp, sc->lmc_gpio);
! 572: sc->ictl.clock_source = LMC_CTL_CLOCK_SOURCE_EXT;
! 573: printf(LMC_PRINTF_FMT ": clock external\n",
! 574: LMC_PRINTF_ARGS);
! 575: } else {
! 576: sc->lmc_gpio |= LMC_GEP_SSI_TXCLOCK;
! 577: LMC_CSR_WRITE(sc, csr_gp, sc->lmc_gpio);
! 578: sc->ictl.clock_source = LMC_CTL_CLOCK_SOURCE_INT;
! 579: printf(LMC_PRINTF_FMT ": clock internal\n",
! 580: LMC_PRINTF_ARGS);
! 581: }
! 582: }
! 583:
! 584: static void
! 585: lmc_ssi_set_speed(lmc_softc_t * const sc, lmc_ctl_t *ctl)
! 586: {
! 587: lmc_ctl_t *ictl = &sc->ictl;
! 588: lmc_av9110_t *av;
! 589:
! 590: /* original settings for clock rate of:
! 591: * 100 KHz (8,25,0,0,2) were incorrect
! 592: * they should have been 80,125,1,3,3
! 593: * There are 17 param combinations to produce this freq.
! 594: * For 1.5 MHz use 120,100,1,1,2 (226 param. combinations)
! 595: */
! 596: if (ctl == NULL) {
! 597: av = &ictl->cardspec.ssi;
! 598: ictl->clock_rate = 1500000;
! 599: av->f = ictl->clock_rate;
! 600: av->n = 120;
! 601: av->m = 100;
! 602: av->v = 1;
! 603: av->x = 1;
! 604: av->r = 2;
! 605:
! 606: write_av9110(sc, av->n, av->m, av->v, av->x, av->r);
! 607: return;
! 608: }
! 609:
! 610: av = &ctl->cardspec.ssi;
! 611:
! 612: if (av->f == 0)
! 613: return;
! 614:
! 615: ictl->clock_rate = av->f; /* really, this is the rate we are */
! 616: ictl->cardspec.ssi = *av;
! 617:
! 618: write_av9110(sc, av->n, av->m, av->v, av->x, av->r);
! 619: }
! 620:
! 621: /*
! 622: * return hardware link status.
! 623: * 0 == link is down, 1 == link is up.
! 624: */
! 625: static int
! 626: lmc_ssi_get_link_status(lmc_softc_t * const sc)
! 627: {
! 628: u_int16_t link_status;
! 629:
! 630: /*
! 631: * missing CTS? Hmm. If we require CTS on, we may never get the
! 632: * link to come up, so omit it in this test.
! 633: *
! 634: * Also, it seems that with a loopback cable, DCD isn't asserted,
! 635: * so just check for things like this:
! 636: * DSR _must_ be asserted.
! 637: * One of DCD or CTS must be asserted.
! 638: */
! 639:
! 640: #ifdef CONFIG_LMC_IGNORE_HARDWARE_HANDSHAKE
! 641: link_status = LMC_CSR_READ(sc, csr_gp_timer);
! 642: link_status = 0x0000ffff - ( link_status & 0x0000ffff);
! 643:
! 644: return( link_status );
! 645: #else
! 646:
! 647: link_status = lmc_mii_readreg(sc, 0, 16);
! 648:
! 649: if ((link_status & LMC_MII16_SSI_DSR) == 0)
! 650: return (0);
! 651:
! 652: if ((link_status & (LMC_MII16_SSI_CTS | LMC_MII16_SSI_DCD)) == 0)
! 653: return (0);
! 654:
! 655: return (1);
! 656: #endif
! 657: }
! 658:
! 659: static void
! 660: lmc_ssi_set_link_status(lmc_softc_t * const sc, int state)
! 661: {
! 662: if (state == LMC_LINK_UP) {
! 663: sc->lmc_miireg16 |= (LMC_MII16_SSI_DTR | LMC_MII16_SSI_RTS);
! 664: printf(LMC_PRINTF_FMT ": asserting DTR and RTS\n",
! 665: LMC_PRINTF_ARGS);
! 666: } else {
! 667: sc->lmc_miireg16 &= ~(LMC_MII16_SSI_DTR | LMC_MII16_SSI_RTS);
! 668: printf(LMC_PRINTF_FMT ": deasserting DTR and RTS\n",
! 669: LMC_PRINTF_ARGS);
! 670: }
! 671:
! 672: lmc_mii_writereg(sc, 0, 16, sc->lmc_miireg16);
! 673:
! 674: }
! 675:
! 676: /*
! 677: * 0 == 16bit, 1 == 32bit
! 678: */
! 679: static void
! 680: lmc_ssi_set_crc_length(lmc_softc_t * const sc, int state)
! 681: {
! 682: if (state == LMC_CTL_CRC_LENGTH_32) {
! 683: /* 32 bit */
! 684: sc->lmc_miireg16 |= LMC_MII16_SSI_CRC;
! 685: sc->ictl.crc_length = LMC_CTL_CRC_LENGTH_32;
! 686: sc->lmc_crcSize = LMC_CTL_CRC_BYTESIZE_4;
! 687:
! 688: } else {
! 689: /* 16 bit */
! 690: sc->lmc_miireg16 &= ~LMC_MII16_SSI_CRC;
! 691: sc->ictl.crc_length = LMC_CTL_CRC_LENGTH_16;
! 692: sc->lmc_crcSize = LMC_CTL_CRC_BYTESIZE_2;
! 693: }
! 694:
! 695: lmc_mii_writereg(sc, 0, 16, sc->lmc_miireg16);
! 696: }
! 697:
! 698: /*
! 699: * These are bits to program the ssi frequency generator
! 700: */
! 701: static inline void
! 702: write_av9110_bit(lmc_softc_t *sc, int c)
! 703: {
! 704: /*
! 705: * set the data bit as we need it.
! 706: */
! 707: sc->lmc_gpio &= ~(LMC_GEP_SERIALCLK);
! 708: if (c & 0x01)
! 709: sc->lmc_gpio |= LMC_GEP_SERIAL;
! 710: else
! 711: sc->lmc_gpio &= ~(LMC_GEP_SERIAL);
! 712: LMC_CSR_WRITE(sc, csr_gp, sc->lmc_gpio);
! 713:
! 714: /*
! 715: * set the clock to high
! 716: */
! 717: sc->lmc_gpio |= LMC_GEP_SERIALCLK;
! 718: LMC_CSR_WRITE(sc, csr_gp, sc->lmc_gpio);
! 719:
! 720: /*
! 721: * set the clock to low again.
! 722: */
! 723: sc->lmc_gpio &= ~(LMC_GEP_SERIALCLK);
! 724: LMC_CSR_WRITE(sc, csr_gp, sc->lmc_gpio);
! 725: }
! 726:
! 727: static void
! 728: write_av9110(lmc_softc_t *sc, u_int32_t n, u_int32_t m, u_int32_t v,
! 729: u_int32_t x, u_int32_t r)
! 730: {
! 731: int i;
! 732:
! 733: #if 0
! 734: printf(LMC_PRINTF_FMT ": speed %u, %d %d %d %d %d\n",
! 735: LMC_PRINTF_ARGS, sc->ictl.clock_rate,
! 736: n, m, v, x, r);
! 737: #endif
! 738:
! 739: sc->lmc_gpio |= LMC_GEP_SSI_GENERATOR;
! 740: sc->lmc_gpio &= ~(LMC_GEP_SERIAL | LMC_GEP_SERIALCLK);
! 741: LMC_CSR_WRITE(sc, csr_gp, sc->lmc_gpio);
! 742:
! 743: /*
! 744: * Set the TXCLOCK, GENERATOR, SERIAL, and SERIALCLK
! 745: * as outputs.
! 746: */
! 747: lmc_gpio_mkoutput(sc, (LMC_GEP_SERIAL | LMC_GEP_SERIALCLK
! 748: | LMC_GEP_SSI_GENERATOR));
! 749:
! 750: sc->lmc_gpio &= ~(LMC_GEP_SSI_GENERATOR);
! 751: LMC_CSR_WRITE(sc, csr_gp, sc->lmc_gpio);
! 752:
! 753: /*
! 754: * a shifting we will go...
! 755: */
! 756: for (i = 0 ; i < 7 ; i++)
! 757: write_av9110_bit(sc, n >> i);
! 758: for (i = 0 ; i < 7 ; i++)
! 759: write_av9110_bit(sc, m >> i);
! 760: for (i = 0 ; i < 1 ; i++)
! 761: write_av9110_bit(sc, v >> i);
! 762: for (i = 0 ; i < 2 ; i++)
! 763: write_av9110_bit(sc, x >> i);
! 764: for (i = 0 ; i < 2 ; i++)
! 765: write_av9110_bit(sc, r >> i);
! 766: for (i = 0 ; i < 5 ; i++)
! 767: write_av9110_bit(sc, 0x17 >> i);
! 768:
! 769: /*
! 770: * stop driving serial-related signals
! 771: */
! 772: lmc_gpio_mkinput(sc,
! 773: (LMC_GEP_SERIAL | LMC_GEP_SERIALCLK
! 774: | LMC_GEP_SSI_GENERATOR));
! 775: }
! 776:
! 777: static void
! 778: lmc_ssi_watchdog (lmc_softc_t * const sc)
! 779: {
! 780: u_int16_t mii17;
! 781: struct ssicsr2 {
! 782: unsigned short dtr:1, dsr:1, rts:1, cable:3, crc:1, led0:1,
! 783: led1:1, led2:1, led3:1, fifo:1, ll:1, rl:1, tm:1, loop:1;
! 784: };
! 785: struct ssicsr2 *ssicsr;
! 786: mii17 = lmc_mii_readreg (sc, 0, 17);
! 787: ssicsr = (struct ssicsr2 *) &mii17;
! 788: if (ssicsr->cable == 7) {
! 789: lmc_led_off (sc, LMC_MII16_LED2);
! 790: }
! 791: else {
! 792: lmc_led_on (sc, LMC_MII16_LED2);
! 793: }
! 794:
! 795: }
! 796:
! 797:
! 798: /*
! 799: * T1 methods
! 800: */
! 801:
! 802: /*
! 803: * The framer regs are multiplexed through MII regs 17 & 18
! 804: * write the register address to MII reg 17 and the * data to MII reg 18. */
! 805: static void lmc_t1_write(lmc_softc_t * const sc, int a, int d)
! 806: {
! 807: lmc_mii_writereg(sc, 0, 17, a);
! 808: lmc_mii_writereg(sc, 0, 18, d);
! 809: }
! 810:
! 811: static int lmc_t1_read(lmc_softc_t * const sc, int a)
! 812: {
! 813: lmc_mii_writereg(sc, 0, 17, a);
! 814: return lmc_mii_readreg(sc, 0, 18);
! 815: }
! 816:
! 817: static void
! 818: lmc_t1_init(lmc_softc_t * const sc)
! 819: {
! 820: u_int16_t mii16;
! 821: int i;
! 822:
! 823: sc->ictl.cardtype = LMC_CTL_CARDTYPE_LMC1200;
! 824: mii16 = lmc_mii_readreg(sc, 0, 16);
! 825:
! 826: mii16 &= ~LMC_MII16_T1_XOE;
! 827: lmc_mii_writereg (sc, 0, 16, mii16);
! 828: sc->lmc_miireg16 = mii16;
! 829:
! 830: /* reset 8370 */
! 831: mii16 &= ~LMC_MII16_T1_RST;
! 832: lmc_mii_writereg(sc, 0, 16, mii16 | LMC_MII16_T1_RST);
! 833: lmc_mii_writereg(sc, 0, 16, mii16);
! 834:
! 835: /* set T1 or E1 line impedance */
! 836: /* mii16 &= ~LMC_MII16_T1_Z; */
! 837: mii16 |= LMC_MII16_T1_Z;
! 838: lmc_mii_writereg(sc, 0, 16, mii16);
! 839:
! 840: /* Standard LMC1200 init code */
! 841: lmc_t1_write(sc, 0x01, 0x1B); /* CR0 - primary control */
! 842: lmc_t1_write(sc, 0x02, 0x42); /* JAT_CR - jitter atten config */
! 843: lmc_t1_write(sc, 0x14, 0x00); /* LOOP - loopback config */
! 844: lmc_t1_write(sc, 0x15, 0x00); /* DL3_TS - xtrnl datalink timeslot */
! 845: lmc_t1_write(sc, 0x18, 0xFF); /* PIO - programmable I/O */
! 846: lmc_t1_write(sc, 0x19, 0x30); /* POE - programmable OE */
! 847: lmc_t1_write(sc, 0x1A, 0x0F); /* CMUX - clock input mux */
! 848: lmc_t1_write(sc, 0x20, 0x41); /* LIU_CR - RX LIU config */
! 849: lmc_t1_write(sc, 0x22, 0x76); /* RLIU_CR - RX LIU config */
! 850: lmc_t1_write(sc, 0x40, 0x03); /* RCR0 - RX config */
! 851: lmc_t1_write(sc, 0x45, 0x00); /* RALM - RX alarm config */
! 852: lmc_t1_write(sc, 0x46, 0x05); /* LATCH - RX alarm/err/cntr latch */
! 853: lmc_t1_write(sc, 0x68, 0x40); /* TLIU_CR - TX LIU config */
! 854: lmc_t1_write(sc, 0x70, 0x0D); /* TCR0 - TX framer config */
! 855: lmc_t1_write(sc, 0x71, 0x05); /* TCR1 - TX config */
! 856: lmc_t1_write(sc, 0x72, 0x0B); /* TFRM - TX frame format */
! 857: lmc_t1_write(sc, 0x73, 0x00); /* TERROR - TX error insert */
! 858: lmc_t1_write(sc, 0x74, 0x00); /* TMAN - TX manual Sa/FEBE config */
! 859: lmc_t1_write(sc, 0x75, 0x00); /* TALM - TX alarm signal config */
! 860: lmc_t1_write(sc, 0x76, 0x00); /* TPATT - TX test pattern config */
! 861: lmc_t1_write(sc, 0x77, 0x00); /* TLB - TX inband loopback confg */
! 862: lmc_t1_write(sc, 0x90, 0x05); /* CLAD_CR - clock rate adapter confg */
! 863: lmc_t1_write(sc, 0x91, 0x05); /* CSEL - clad freq sel */
! 864: lmc_t1_write(sc, 0xA6, 0x00); /* DL1_CTL - DL1 control */
! 865: lmc_t1_write(sc, 0xB1, 0x00); /* DL2_CTL - DL2 control */
! 866: lmc_t1_write(sc, 0xD0, 0x47); /* SBI_CR - sys bus iface config */
! 867: lmc_t1_write(sc, 0xD1, 0x70); /* RSB_CR - RX sys bus config */
! 868: lmc_t1_write(sc, 0xD4, 0x30); /* TSB_CR - TX sys bus config */
! 869: for (i=0; i<32; i++)
! 870: {
! 871: lmc_t1_write(sc, 0x0E0+i, 0x00); /*SBCn sysbus perchannel ctl */
! 872: lmc_t1_write(sc, 0x100+i, 0x00); /* TPCn - TX per-channel ctl */
! 873: lmc_t1_write(sc, 0x180+i, 0x00); /* RPCn - RX per-channel ctl */
! 874: }
! 875: for (i=1; i<25; i++)
! 876: { lmc_t1_write(sc, 0x0E0+i, 0x0D);
! 877: /* SBCn - sys bus per-channel ctl */
! 878: }
! 879:
! 880: mii16 |= LMC_MII16_T1_XOE;
! 881: lmc_mii_writereg(sc, 0, 16, mii16);
! 882: sc->lmc_miireg16 = mii16;
! 883: }
! 884:
! 885: static void lmc_t1_default(lmc_softc_t * const sc)
! 886: {
! 887: sc->lmc_miireg16 = LMC_MII16_LED_ALL;
! 888: sc->lmc_media->set_link_status(sc, LMC_LINK_DOWN);
! 889: sc->lmc_media->set_circuit_type(sc, LMC_CTL_CIRCUIT_TYPE_T1);
! 890: sc->lmc_media->set_crc_length(sc, LMC_CTL_CRC_LENGTH_16);
! 891: }
! 892:
! 893: /*
! 894: * Given a user provided state, set ourselves up to match it. This will
! 895: * always reset the card if needed.
! 896: */
! 897:
! 898: static void
! 899: lmc_t1_set_status(lmc_softc_t * const sc, lmc_ctl_t *ctl){
! 900: if (ctl == NULL) {
! 901: sc->lmc_media->set_circuit_type(sc, sc->ictl.circuit_type);
! 902: lmc_set_protocol(sc, NULL);
! 903:
! 904: return;
! 905: }
! 906:
! 907: /*
! 908: * check for change in circuit type
! 909: */
! 910:
! 911: if (ctl->circuit_type == LMC_CTL_CIRCUIT_TYPE_T1
! 912: && sc->ictl.circuit_type == LMC_CTL_CIRCUIT_TYPE_E1)
! 913: sc->lmc_media->set_circuit_type(sc,LMC_CTL_CIRCUIT_TYPE_E1 );
! 914: else if (ctl->circuit_type == LMC_CTL_CIRCUIT_TYPE_E1
! 915: && sc->ictl.circuit_type == LMC_CTL_CIRCUIT_TYPE_T1)
! 916: sc->lmc_media->set_circuit_type(sc, LMC_CTL_CIRCUIT_TYPE_T1);
! 917: lmc_set_protocol(sc, ctl);
! 918: }
! 919:
! 920: /*
! 921: * return hardware link status.
! 922: * 0 == link is down, 1 == link is up.
! 923: */
! 924:
! 925: static int
! 926: lmc_t1_get_link_status(lmc_softc_t * const sc){
! 927: u_int16_t link_status;
! 928: lmc_mii_writereg(sc, 0, 17, T1FRAMER_ALARM1_STATUS );
! 929: link_status = lmc_mii_readreg(sc, 0, 18);
! 930:
! 931: /*
! 932: * LMC 1200 LED definitions
! 933: * led0 yellow = far-end adapter is in Red alarm condition
! 934: * led1 blue = received an Alarm Indication signal (upstream failure)
! 935: * led2 Green = power to adapter, Gate Array loaded & driver attached
! 936: * led3 red = Loss of Signal (LOS) or out of frame (OOF) conditions
! 937: * detected on T3 receive signal
! 938: */
! 939:
! 940: /* detect a change in Blue alarm indication signal */
! 941:
! 942: if( (sc->t1_alarm1_status & T1F_RAIS) != (link_status & T1F_RAIS) )
! 943: {
! 944: if( link_status & T1F_RAIS )
! 945: { /* turn on blue LED */
! 946: printf("%s: link status: RAIS turn ON Blue %x\n", sc->lmc_xname, link_status); /* DEBUG */
! 947: lmc_led_on(sc, LMC_DS3_LED1);
! 948: }
! 949: else
! 950: { /* turn off blue LED */
! 951: printf("%s: link status: RAIS turn OFF Blue %x\n", sc->lmc_xname, link_status ); /* DEBUG */
! 952: lmc_led_off(sc, LMC_DS3_LED1);
! 953: }
! 954: }
! 955: /*
! 956: * T1F_RYEL wiggles quite a bit,
! 957: * taking it out until I understand why -baz 6/22/99
! 958: */
! 959: /* Yellow alarm indication */
! 960: if( (sc->t1_alarm1_status & T1F_RMYEL) !=
! 961: (link_status & T1F_RMYEL) )
! 962: {
! 963: if( (link_status & (T1F_RYEL | T1F_RMYEL)) == 0 )
! 964: {
! 965: /* turn off yellow LED */
! 966: printf("%s: link status: RYEL turn OFF Yellow %x\n", sc->lmc_xname, link_status); /* DEBUG */
! 967: lmc_led_off(sc, LMC_DS3_LED0);
! 968:
! 969: }
! 970: else
! 971: {
! 972: /* turn on yellow LED */
! 973: printf("%s: link status: RYEL turn ON Yellow %x\n", sc->lmc_xname, link_status); /* DEBUG */
! 974: lmc_led_on(sc, LMC_DS3_LED0);
! 975: }
! 976: }
! 977:
! 978:
! 979: sc->t1_alarm1_status = link_status;
! 980:
! 981: lmc_mii_writereg(sc, 0, 17, T1FRAMER_ALARM2_STATUS );
! 982: sc->t1_alarm2_status = lmc_mii_readreg(sc, 0, 18);
! 983:
! 984: /* link status based upon T1 receive loss of frame or
! 985: * loss of signal - RED alarm indication */
! 986: if ((link_status & (T1F_RLOF | T1F_RLOS)) == 0)
! 987: return 1;
! 988: else
! 989: return 0;
! 990: }
! 991:
! 992: /*
! 993: * 1 == T1 Circuit Type , 0 == E1 Circuit Type
! 994: */
! 995: static void
! 996: lmc_t1_set_circuit_type(lmc_softc_t * const sc, int ie)
! 997: {
! 998: if (ie == LMC_CTL_CIRCUIT_TYPE_T1)
! 999: {
! 1000: sc->lmc_miireg16 |= LMC_MII16_T1_Z;
! 1001: sc->ictl.circuit_type = LMC_CTL_CIRCUIT_TYPE_T1;
! 1002: } else { sc->lmc_miireg16 &= ~LMC_MII16_T1_Z;
! 1003: sc->ictl.scrambler_onoff = LMC_CTL_CIRCUIT_TYPE_E1;
! 1004: }
! 1005: lmc_mii_writereg(sc, 0, 16, sc->lmc_miireg16);
! 1006: }
! 1007:
! 1008: /*
! 1009: * 0 == 16bit, 1 == 32bit */
! 1010: static void
! 1011: lmc_t1_set_crc_length(lmc_softc_t * const sc, int state)
! 1012: {
! 1013: if (state == LMC_CTL_CRC_LENGTH_32) {
! 1014: /* 32 bit */
! 1015: sc->lmc_miireg16 |= LMC_MII16_T1_CRC;
! 1016: sc->ictl.crc_length = LMC_CTL_CRC_LENGTH_32;
! 1017: sc->lmc_crcSize = LMC_CTL_CRC_BYTESIZE_4;
! 1018:
! 1019: } else {
! 1020: /* 16 bit */
! 1021: sc->lmc_miireg16 &= ~LMC_MII16_T1_CRC;
! 1022: sc->ictl.crc_length = LMC_CTL_CRC_LENGTH_16;
! 1023: sc->lmc_crcSize = LMC_CTL_CRC_BYTESIZE_2;
! 1024:
! 1025: }
! 1026:
! 1027: lmc_mii_writereg(sc, 0, 16, sc->lmc_miireg16);
! 1028: }
! 1029:
! 1030: /*
! 1031: * 1 == internal, 0 == external
! 1032: */
! 1033: static void
! 1034: lmc_t1_set_clock (lmc_softc_t * const sc, int ie)
! 1035: {
! 1036: if (ie == LMC_CTL_CLOCK_SOURCE_EXT) {
! 1037: sc->lmc_gpio &= ~(LMC_GEP_SSI_TXCLOCK);
! 1038: LMC_CSR_WRITE (sc, csr_gp, sc->lmc_gpio);
! 1039: sc->ictl.clock_source = LMC_CTL_CLOCK_SOURCE_EXT;
! 1040: printf (LMC_PRINTF_FMT ": clock external\n", LMC_PRINTF_ARGS);
! 1041: }
! 1042: else {
! 1043: sc->lmc_gpio |= LMC_GEP_SSI_TXCLOCK;
! 1044: LMC_CSR_WRITE (sc, csr_gp, sc->lmc_gpio);
! 1045: sc->ictl.clock_source = LMC_CTL_CLOCK_SOURCE_INT;
! 1046: printf (LMC_PRINTF_FMT ": clock internal\n", LMC_PRINTF_ARGS);
! 1047: }
! 1048: }
! 1049:
! 1050: static void
! 1051: lmc_t1_watchdog(lmc_softc_t * const sc)
! 1052: {
! 1053: int t1stat;
! 1054:
! 1055: /* read alarm 1 status (receive) */
! 1056: t1stat = lmc_t1_read (sc, 0x47);
! 1057: /* blue alarm -- RAIS */
! 1058: if (t1stat & 0x08) {
! 1059: if (sc->lmc_blue != 1)
! 1060: printf ("%s: AIS Received\n", sc->lmc_xname);
! 1061: lmc_led_on (sc, LMC_DS3_LED1 | LMC_DS3_LED2);
! 1062: sc->lmc_blue = 1;
! 1063: } else {
! 1064: if (sc->lmc_blue == 1)
! 1065: printf ("%s: AIS ok\n", sc->lmc_xname);
! 1066: lmc_led_off (sc, LMC_DS3_LED1);
! 1067: lmc_led_on (sc, LMC_DS3_LED2);
! 1068: sc->lmc_blue = 0;
! 1069: }
! 1070:
! 1071: /* Red alarm -- LOS | LOF */
! 1072: if (t1stat & 0x04) {
! 1073: /* Only print the error once */
! 1074: if (sc->lmc_red != 1)
! 1075: printf ("%s: Red Alarm\n", sc->lmc_xname);
! 1076: lmc_led_on (sc, LMC_DS3_LED2 | LMC_DS3_LED3);
! 1077: sc->lmc_red = 1;
! 1078: } else {
! 1079: if (sc->lmc_red == 1)
! 1080: printf ("%s: Red Alarm ok\n", sc->lmc_xname);
! 1081: lmc_led_off (sc, LMC_DS3_LED3);
! 1082: lmc_led_on (sc, LMC_DS3_LED2);
! 1083: sc->lmc_red = 0;
! 1084: }
! 1085:
! 1086: /* check for Receive Multiframe Yellow Alarm
! 1087: * Ignore Receive Yellow Alarm
! 1088: */
! 1089: if (t1stat & 0x80) {
! 1090: if (sc->lmc_yel != 1) {
! 1091: printf ("%s: Receive Yellow Alarm\n", sc->lmc_xname);
! 1092: }
! 1093: lmc_led_on (sc, LMC_DS3_LED0 | LMC_DS3_LED2);
! 1094: sc->lmc_yel = 1;
! 1095: }
! 1096: else {
! 1097: if (sc->lmc_yel == 1)
! 1098: printf ("%s: Yellow Alarm ok\n", sc->lmc_xname);
! 1099: lmc_led_off (sc, LMC_DS3_LED0);
! 1100: lmc_led_on (sc, LMC_DS3_LED2);
! 1101: sc->lmc_yel = 0;
! 1102: }
! 1103: }
! 1104:
! 1105:
! 1106: static void
! 1107: lmc_set_protocol(lmc_softc_t * const sc, lmc_ctl_t *ctl)
! 1108: {
! 1109: if (ctl == 0) {
! 1110: sc->ictl.keepalive_onoff = LMC_CTL_ON;
! 1111:
! 1112: return;
! 1113: }
! 1114:
! 1115: if (ctl->keepalive_onoff != sc->ictl.keepalive_onoff) {
! 1116: switch (ctl->keepalive_onoff) {
! 1117: case LMC_CTL_ON:
! 1118: printf(LMC_PRINTF_FMT ": enabling keepalive\n",
! 1119: LMC_PRINTF_ARGS);
! 1120: sc->ictl.keepalive_onoff = LMC_CTL_ON;
! 1121: sc->lmc_sppp.pp_flags = PP_CISCO | PP_KEEPALIVE;
! 1122: break;
! 1123: case LMC_CTL_OFF:
! 1124: printf(LMC_PRINTF_FMT ": disabling keepalive\n",
! 1125: LMC_PRINTF_ARGS);
! 1126: sc->ictl.keepalive_onoff = LMC_CTL_OFF;
! 1127: sc->lmc_sppp.pp_flags = PP_CISCO;
! 1128: }
! 1129: }
! 1130: }
CVSweb