Annotation of sys/dev/pci/if_pcn.c, Revision 1.1
1.1 ! nbrk 1: /* $OpenBSD: if_pcn.c,v 1.15 2006/11/09 14:25:23 reyk Exp $ */
! 2: /* $NetBSD: if_pcn.c,v 1.26 2005/05/07 09:15:44 is Exp $ */
! 3:
! 4: /*
! 5: * Copyright (c) 2001 Wasabi Systems, Inc.
! 6: * All rights reserved.
! 7: *
! 8: * Written by Jason R. Thorpe for Wasabi Systems, Inc.
! 9: *
! 10: * Redistribution and use in source and binary forms, with or without
! 11: * modification, are permitted provided that the following conditions
! 12: * are met:
! 13: * 1. Redistributions of source code must retain the above copyright
! 14: * notice, this list of conditions and the following disclaimer.
! 15: * 2. Redistributions in binary form must reproduce the above copyright
! 16: * notice, this list of conditions and the following disclaimer in the
! 17: * documentation and/or other materials provided with the distribution.
! 18: * 3. All advertising materials mentioning features or use of this software
! 19: * must display the following acknowledgement:
! 20: * This product includes software developed for the NetBSD Project by
! 21: * Wasabi Systems, Inc.
! 22: * 4. The name of Wasabi Systems, Inc. may not be used to endorse
! 23: * or promote products derived from this software without specific prior
! 24: * written permission.
! 25: *
! 26: * THIS SOFTWARE IS PROVIDED BY WASABI SYSTEMS, INC. ``AS IS'' AND
! 27: * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
! 28: * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
! 29: * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL WASABI SYSTEMS, INC
! 30: * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
! 31: * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
! 32: * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
! 33: * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
! 34: * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
! 35: * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
! 36: * POSSIBILITY OF SUCH DAMAGE.
! 37: */
! 38:
! 39: /*
! 40: * Device driver for the AMD PCnet-PCI series of Ethernet
! 41: * chips:
! 42: *
! 43: * * Am79c970 PCnet-PCI Single-Chip Ethernet Controller for PCI
! 44: * Local Bus
! 45: *
! 46: * * Am79c970A PCnet-PCI II Single-Chip Full-Duplex Ethernet Controller
! 47: * for PCI Local Bus
! 48: *
! 49: * * Am79c971 PCnet-FAST Single-Chip Full-Duplex 10/100Mbps
! 50: * Ethernet Controller for PCI Local Bus
! 51: *
! 52: * * Am79c972 PCnet-FAST+ Enhanced 10/100Mbps PCI Ethernet Controller
! 53: * with OnNow Support
! 54: *
! 55: * * Am79c973/Am79c975 PCnet-FAST III Single-Chip 10/100Mbps PCI
! 56: * Ethernet Controller with Integrated PHY
! 57: *
! 58: * This also supports the virtual PCnet-PCI Ethernet interface found
! 59: * in VMware.
! 60: *
! 61: * TODO:
! 62: *
! 63: * * Split this into bus-specific and bus-independent portions.
! 64: * The core could also be used for the ILACC (Am79900) 32-bit
! 65: * Ethernet chip (XXX only if we use an ILACC-compatible SWSTYLE).
! 66: */
! 67:
! 68: #if 0
! 69: #include <sys/cdefs.h>
! 70: __KERNEL_RCSID(0, "$NetBSD: if_pcn.c,v 1.26 2005/05/07 09:15:44 is Exp $");
! 71: #endif
! 72:
! 73: #include "bpfilter.h"
! 74:
! 75: #include <sys/param.h>
! 76: #include <sys/systm.h>
! 77: #include <sys/timeout.h>
! 78: #include <sys/mbuf.h>
! 79: #include <sys/malloc.h>
! 80: #include <sys/kernel.h>
! 81: #include <sys/socket.h>
! 82: #include <sys/ioctl.h>
! 83: #include <sys/errno.h>
! 84: #include <sys/device.h>
! 85: #include <sys/queue.h>
! 86:
! 87: #include <net/if.h>
! 88: #include <net/if_dl.h>
! 89:
! 90: #ifdef INET
! 91: #include <netinet/in.h>
! 92: #include <netinet/in_systm.h>
! 93: #include <netinet/in_var.h>
! 94: #include <netinet/ip.h>
! 95: #include <netinet/if_ether.h>
! 96: #endif
! 97:
! 98: #include <net/if_media.h>
! 99:
! 100: #if NBPFILTER > 0
! 101: #include <net/bpf.h>
! 102: #endif
! 103:
! 104: #include <machine/bus.h>
! 105: #include <machine/intr.h>
! 106: #include <machine/endian.h>
! 107:
! 108: #include <dev/mii/mii.h>
! 109: #include <dev/mii/miivar.h>
! 110:
! 111: #include <dev/ic/am79900reg.h>
! 112: #include <dev/ic/lancereg.h>
! 113:
! 114: #include <dev/pci/pcireg.h>
! 115: #include <dev/pci/pcivar.h>
! 116: #include <dev/pci/pcidevs.h>
! 117:
! 118: /*
! 119: * Register definitions for the AMD PCnet-PCI series of Ethernet
! 120: * chips.
! 121: *
! 122: * These are only the registers that we access directly from PCI
! 123: * space. Everything else (accessed via the RAP + RDP/BDP) is
! 124: * defined in <dev/ic/lancereg.h>.
! 125: */
! 126:
! 127: /*
! 128: * PCI configuration space.
! 129: */
! 130:
! 131: #define PCN_PCI_CBIO (PCI_MAPREG_START + 0x00)
! 132: #define PCN_PCI_CBMEM (PCI_MAPREG_START + 0x04)
! 133:
! 134: /*
! 135: * I/O map in Word I/O mode.
! 136: */
! 137:
! 138: #define PCN16_APROM 0x00
! 139: #define PCN16_RDP 0x10
! 140: #define PCN16_RAP 0x12
! 141: #define PCN16_RESET 0x14
! 142: #define PCN16_BDP 0x16
! 143:
! 144: /*
! 145: * I/O map in DWord I/O mode.
! 146: */
! 147:
! 148: #define PCN32_APROM 0x00
! 149: #define PCN32_RDP 0x10
! 150: #define PCN32_RAP 0x14
! 151: #define PCN32_RESET 0x18
! 152: #define PCN32_BDP 0x1c
! 153:
! 154: /*
! 155: * Transmit descriptor list size. This is arbitrary, but allocate
! 156: * enough descriptors for 128 pending transmissions, and 4 segments
! 157: * per packet. This MUST work out to a power of 2.
! 158: *
! 159: * NOTE: We can't have any more than 512 Tx descriptors, SO BE CAREFUL!
! 160: *
! 161: * So we play a little trick here. We give each packet up to 16
! 162: * DMA segments, but only allocate the max of 512 descriptors. The
! 163: * transmit logic can deal with this, we just are hoping to sneak by.
! 164: */
! 165: #define PCN_NTXSEGS 16
! 166:
! 167: #define PCN_TXQUEUELEN 128
! 168: #define PCN_TXQUEUELEN_MASK (PCN_TXQUEUELEN - 1)
! 169: #define PCN_NTXDESC 512
! 170: #define PCN_NTXDESC_MASK (PCN_NTXDESC - 1)
! 171: #define PCN_NEXTTX(x) (((x) + 1) & PCN_NTXDESC_MASK)
! 172: #define PCN_NEXTTXS(x) (((x) + 1) & PCN_TXQUEUELEN_MASK)
! 173:
! 174: /* Tx interrupt every N + 1 packets. */
! 175: #define PCN_TXINTR_MASK 7
! 176:
! 177: /*
! 178: * Receive descriptor list size. We have one Rx buffer per incoming
! 179: * packet, so this logic is a little simpler.
! 180: */
! 181: #define PCN_NRXDESC 128
! 182: #define PCN_NRXDESC_MASK (PCN_NRXDESC - 1)
! 183: #define PCN_NEXTRX(x) (((x) + 1) & PCN_NRXDESC_MASK)
! 184:
! 185: /*
! 186: * Control structures are DMA'd to the PCnet chip. We allocate them in
! 187: * a single clump that maps to a single DMA segment to make several things
! 188: * easier.
! 189: */
! 190: struct pcn_control_data {
! 191: /* The transmit descriptors. */
! 192: struct letmd pcd_txdescs[PCN_NTXDESC];
! 193:
! 194: /* The receive descriptors. */
! 195: struct lermd pcd_rxdescs[PCN_NRXDESC];
! 196:
! 197: /* The init block. */
! 198: struct leinit pcd_initblock;
! 199: };
! 200:
! 201: #define PCN_CDOFF(x) offsetof(struct pcn_control_data, x)
! 202: #define PCN_CDTXOFF(x) PCN_CDOFF(pcd_txdescs[(x)])
! 203: #define PCN_CDRXOFF(x) PCN_CDOFF(pcd_rxdescs[(x)])
! 204: #define PCN_CDINITOFF PCN_CDOFF(pcd_initblock)
! 205:
! 206: /*
! 207: * Software state for transmit jobs.
! 208: */
! 209: struct pcn_txsoft {
! 210: struct mbuf *txs_mbuf; /* head of our mbuf chain */
! 211: bus_dmamap_t txs_dmamap; /* our DMA map */
! 212: int txs_firstdesc; /* first descriptor in packet */
! 213: int txs_lastdesc; /* last descriptor in packet */
! 214: };
! 215:
! 216: /*
! 217: * Software state for receive jobs.
! 218: */
! 219: struct pcn_rxsoft {
! 220: struct mbuf *rxs_mbuf; /* head of our mbuf chain */
! 221: bus_dmamap_t rxs_dmamap; /* our DMA map */
! 222: };
! 223:
! 224: /*
! 225: * Description of Rx FIFO watermarks for various revisions.
! 226: */
! 227: static const char * const pcn_79c970_rcvfw[] = {
! 228: "16 bytes",
! 229: "64 bytes",
! 230: "128 bytes",
! 231: NULL,
! 232: };
! 233:
! 234: static const char * const pcn_79c971_rcvfw[] = {
! 235: "16 bytes",
! 236: "64 bytes",
! 237: "112 bytes",
! 238: NULL,
! 239: };
! 240:
! 241: /*
! 242: * Description of Tx start points for various revisions.
! 243: */
! 244: static const char * const pcn_79c970_xmtsp[] = {
! 245: "8 bytes",
! 246: "64 bytes",
! 247: "128 bytes",
! 248: "248 bytes",
! 249: };
! 250:
! 251: static const char * const pcn_79c971_xmtsp[] = {
! 252: "20 bytes",
! 253: "64 bytes",
! 254: "128 bytes",
! 255: "248 bytes",
! 256: };
! 257:
! 258: static const char * const pcn_79c971_xmtsp_sram[] = {
! 259: "44 bytes",
! 260: "64 bytes",
! 261: "128 bytes",
! 262: "store-and-forward",
! 263: };
! 264:
! 265: /*
! 266: * Description of Tx FIFO watermarks for various revisions.
! 267: */
! 268: static const char * const pcn_79c970_xmtfw[] = {
! 269: "16 bytes",
! 270: "64 bytes",
! 271: "128 bytes",
! 272: NULL,
! 273: };
! 274:
! 275: static const char * const pcn_79c971_xmtfw[] = {
! 276: "16 bytes",
! 277: "64 bytes",
! 278: "108 bytes",
! 279: NULL,
! 280: };
! 281:
! 282: /*
! 283: * Software state per device.
! 284: */
! 285: struct pcn_softc {
! 286: struct device sc_dev; /* generic device information */
! 287: bus_space_tag_t sc_st; /* bus space tag */
! 288: bus_space_handle_t sc_sh; /* bus space handle */
! 289: bus_dma_tag_t sc_dmat; /* bus DMA tag */
! 290: struct arpcom sc_arpcom; /* Ethernet common data */
! 291: void *sc_sdhook; /* shutdown hook */
! 292:
! 293: /* Points to our media routines, etc. */
! 294: const struct pcn_variant *sc_variant;
! 295:
! 296: void *sc_ih; /* interrupt cookie */
! 297:
! 298: struct mii_data sc_mii; /* MII/media information */
! 299:
! 300: struct timeout sc_tick_timeout; /* tick timeout */
! 301:
! 302: bus_dmamap_t sc_cddmamap; /* control data DMA map */
! 303: #define sc_cddma sc_cddmamap->dm_segs[0].ds_addr
! 304:
! 305: /* Software state for transmit and receive descriptors. */
! 306: struct pcn_txsoft sc_txsoft[PCN_TXQUEUELEN];
! 307: struct pcn_rxsoft sc_rxsoft[PCN_NRXDESC];
! 308:
! 309: /* Control data structures */
! 310: struct pcn_control_data *sc_control_data;
! 311: #define sc_txdescs sc_control_data->pcd_txdescs
! 312: #define sc_rxdescs sc_control_data->pcd_rxdescs
! 313: #define sc_initblock sc_control_data->pcd_initblock
! 314:
! 315: const char * const *sc_rcvfw_desc; /* Rx FIFO watermark info */
! 316: int sc_rcvfw;
! 317:
! 318: const char * const *sc_xmtsp_desc; /* Tx start point info */
! 319: int sc_xmtsp;
! 320:
! 321: const char * const *sc_xmtfw_desc; /* Tx FIFO watermark info */
! 322: int sc_xmtfw;
! 323:
! 324: int sc_flags; /* misc. flags; see below */
! 325: int sc_swstyle; /* the software style in use */
! 326:
! 327: int sc_txfree; /* number of free Tx descriptors */
! 328: int sc_txnext; /* next ready Tx descriptor */
! 329:
! 330: int sc_txsfree; /* number of free Tx jobs */
! 331: int sc_txsnext; /* next free Tx job */
! 332: int sc_txsdirty; /* dirty Tx jobs */
! 333:
! 334: int sc_rxptr; /* next ready Rx descriptor/job */
! 335:
! 336: uint32_t sc_csr5; /* prototype CSR5 register */
! 337: uint32_t sc_mode; /* prototype MODE register */
! 338: };
! 339:
! 340: /* sc_flags */
! 341: #define PCN_F_HAS_MII 0x0001 /* has MII */
! 342:
! 343: #define PCN_CDTXADDR(sc, x) ((sc)->sc_cddma + PCN_CDTXOFF((x)))
! 344: #define PCN_CDRXADDR(sc, x) ((sc)->sc_cddma + PCN_CDRXOFF((x)))
! 345: #define PCN_CDINITADDR(sc) ((sc)->sc_cddma + PCN_CDINITOFF)
! 346:
! 347: #define PCN_CDTXSYNC(sc, x, n, ops) \
! 348: do { \
! 349: int __x, __n; \
! 350: \
! 351: __x = (x); \
! 352: __n = (n); \
! 353: \
! 354: /* If it will wrap around, sync to the end of the ring. */ \
! 355: if ((__x + __n) > PCN_NTXDESC) { \
! 356: bus_dmamap_sync((sc)->sc_dmat, (sc)->sc_cddmamap, \
! 357: PCN_CDTXOFF(__x), sizeof(struct letmd) * \
! 358: (PCN_NTXDESC - __x), (ops)); \
! 359: __n -= (PCN_NTXDESC - __x); \
! 360: __x = 0; \
! 361: } \
! 362: \
! 363: /* Now sync whatever is left. */ \
! 364: bus_dmamap_sync((sc)->sc_dmat, (sc)->sc_cddmamap, \
! 365: PCN_CDTXOFF(__x), sizeof(struct letmd) * __n, (ops)); \
! 366: } while (/*CONSTCOND*/0)
! 367:
! 368: #define PCN_CDRXSYNC(sc, x, ops) \
! 369: bus_dmamap_sync((sc)->sc_dmat, (sc)->sc_cddmamap, \
! 370: PCN_CDRXOFF((x)), sizeof(struct lermd), (ops))
! 371:
! 372: #define PCN_CDINITSYNC(sc, ops) \
! 373: bus_dmamap_sync((sc)->sc_dmat, (sc)->sc_cddmamap, \
! 374: PCN_CDINITOFF, sizeof(struct leinit), (ops))
! 375:
! 376: #define PCN_INIT_RXDESC(sc, x) \
! 377: do { \
! 378: struct pcn_rxsoft *__rxs = &(sc)->sc_rxsoft[(x)]; \
! 379: struct lermd *__rmd = &(sc)->sc_rxdescs[(x)]; \
! 380: struct mbuf *__m = __rxs->rxs_mbuf; \
! 381: \
! 382: /* \
! 383: * Note: We scoot the packet forward 2 bytes in the buffer \
! 384: * so that the payload after the Ethernet header is aligned \
! 385: * to a 4-byte boundary. \
! 386: */ \
! 387: __m->m_data = __m->m_ext.ext_buf + 2; \
! 388: \
! 389: if ((sc)->sc_swstyle == LE_B20_SSTYLE_PCNETPCI3) { \
! 390: __rmd->rmd2 = \
! 391: htole32(__rxs->rxs_dmamap->dm_segs[0].ds_addr + 2); \
! 392: __rmd->rmd0 = 0; \
! 393: } else { \
! 394: __rmd->rmd2 = 0; \
! 395: __rmd->rmd0 = \
! 396: htole32(__rxs->rxs_dmamap->dm_segs[0].ds_addr + 2); \
! 397: } \
! 398: __rmd->rmd1 = htole32(LE_R1_OWN|LE_R1_ONES| \
! 399: (LE_BCNT(MCLBYTES - 2) & LE_R1_BCNT_MASK)); \
! 400: PCN_CDRXSYNC((sc), (x), BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE);\
! 401: } while(/*CONSTCOND*/0)
! 402:
! 403: void pcn_start(struct ifnet *);
! 404: void pcn_watchdog(struct ifnet *);
! 405: int pcn_ioctl(struct ifnet *, u_long, caddr_t);
! 406: int pcn_init(struct ifnet *);
! 407: void pcn_stop(struct ifnet *, int);
! 408:
! 409: void pcn_shutdown(void *);
! 410:
! 411: void pcn_reset(struct pcn_softc *);
! 412: void pcn_rxdrain(struct pcn_softc *);
! 413: int pcn_add_rxbuf(struct pcn_softc *, int);
! 414: void pcn_tick(void *);
! 415:
! 416: void pcn_spnd(struct pcn_softc *);
! 417:
! 418: void pcn_set_filter(struct pcn_softc *);
! 419:
! 420: int pcn_intr(void *);
! 421: void pcn_txintr(struct pcn_softc *);
! 422: int pcn_rxintr(struct pcn_softc *);
! 423:
! 424: int pcn_mii_readreg(struct device *, int, int);
! 425: void pcn_mii_writereg(struct device *, int, int, int);
! 426: void pcn_mii_statchg(struct device *);
! 427:
! 428: void pcn_79c970_mediainit(struct pcn_softc *);
! 429: int pcn_79c970_mediachange(struct ifnet *);
! 430: void pcn_79c970_mediastatus(struct ifnet *, struct ifmediareq *);
! 431:
! 432: void pcn_79c971_mediainit(struct pcn_softc *);
! 433: int pcn_79c971_mediachange(struct ifnet *);
! 434: void pcn_79c971_mediastatus(struct ifnet *, struct ifmediareq *);
! 435:
! 436: /*
! 437: * Description of a PCnet-PCI variant. Used to select media access
! 438: * method, mostly, and to print a nice description of the chip.
! 439: */
! 440: static const struct pcn_variant {
! 441: const char *pcv_desc;
! 442: void (*pcv_mediainit)(struct pcn_softc *);
! 443: uint16_t pcv_chipid;
! 444: } pcn_variants[] = {
! 445: { "Am79c970",
! 446: pcn_79c970_mediainit,
! 447: PARTID_Am79c970 },
! 448:
! 449: { "Am79c970A",
! 450: pcn_79c970_mediainit,
! 451: PARTID_Am79c970A },
! 452:
! 453: { "Am79c971",
! 454: pcn_79c971_mediainit,
! 455: PARTID_Am79c971 },
! 456:
! 457: { "Am79c972",
! 458: pcn_79c971_mediainit,
! 459: PARTID_Am79c972 },
! 460:
! 461: { "Am79c973",
! 462: pcn_79c971_mediainit,
! 463: PARTID_Am79c973 },
! 464:
! 465: { "Am79c975",
! 466: pcn_79c971_mediainit,
! 467: PARTID_Am79c975 },
! 468:
! 469: { "Am79c976",
! 470: pcn_79c971_mediainit,
! 471: PARTID_Am79c976 },
! 472:
! 473: { "Am79c978",
! 474: pcn_79c971_mediainit,
! 475: PARTID_Am79c978 },
! 476:
! 477: { "Unknown",
! 478: pcn_79c971_mediainit,
! 479: 0 },
! 480: };
! 481:
! 482: int pcn_copy_small = 0;
! 483:
! 484: int pcn_match(struct device *, void *, void *);
! 485: void pcn_attach(struct device *, struct device *, void *);
! 486:
! 487: struct cfattach pcn_ca = {
! 488: sizeof(struct pcn_softc), pcn_match, pcn_attach,
! 489: };
! 490:
! 491: const struct pci_matchid pcn_devices[] = {
! 492: { PCI_VENDOR_AMD, PCI_PRODUCT_AMD_PCNET_PCI },
! 493: { PCI_VENDOR_AMD, PCI_PRODUCT_AMD_PCHOME_PCI }
! 494: };
! 495:
! 496: struct cfdriver pcn_cd = {
! 497: 0, "pcn", DV_IFNET
! 498: };
! 499:
! 500: /*
! 501: * Routines to read and write the PCnet-PCI CSR/BCR space.
! 502: */
! 503:
! 504: static __inline uint32_t
! 505: pcn_csr_read(struct pcn_softc *sc, int reg)
! 506: {
! 507:
! 508: bus_space_write_4(sc->sc_st, sc->sc_sh, PCN32_RAP, reg);
! 509: return (bus_space_read_4(sc->sc_st, sc->sc_sh, PCN32_RDP));
! 510: }
! 511:
! 512: static __inline void
! 513: pcn_csr_write(struct pcn_softc *sc, int reg, uint32_t val)
! 514: {
! 515:
! 516: bus_space_write_4(sc->sc_st, sc->sc_sh, PCN32_RAP, reg);
! 517: bus_space_write_4(sc->sc_st, sc->sc_sh, PCN32_RDP, val);
! 518: }
! 519:
! 520: static __inline uint32_t
! 521: pcn_bcr_read(struct pcn_softc *sc, int reg)
! 522: {
! 523:
! 524: bus_space_write_4(sc->sc_st, sc->sc_sh, PCN32_RAP, reg);
! 525: return (bus_space_read_4(sc->sc_st, sc->sc_sh, PCN32_BDP));
! 526: }
! 527:
! 528: static __inline void
! 529: pcn_bcr_write(struct pcn_softc *sc, int reg, uint32_t val)
! 530: {
! 531:
! 532: bus_space_write_4(sc->sc_st, sc->sc_sh, PCN32_RAP, reg);
! 533: bus_space_write_4(sc->sc_st, sc->sc_sh, PCN32_BDP, val);
! 534: }
! 535:
! 536: static const struct pcn_variant *
! 537: pcn_lookup_variant(uint16_t chipid)
! 538: {
! 539: const struct pcn_variant *pcv;
! 540:
! 541: for (pcv = pcn_variants; pcv->pcv_chipid != 0; pcv++) {
! 542: if (chipid == pcv->pcv_chipid)
! 543: return (pcv);
! 544: }
! 545:
! 546: /*
! 547: * This covers unknown chips, which we simply treat like
! 548: * a generic PCnet-FAST.
! 549: */
! 550: return (pcv);
! 551: }
! 552:
! 553: int
! 554: pcn_match(struct device *parent, void *match, void *aux)
! 555: {
! 556: struct pci_attach_args *pa = aux;
! 557:
! 558: /*
! 559: * IBM makes a PCI variant of this card which shows up as a
! 560: * Trident Microsystems 4DWAVE DX (ethernet network, revision 0x25)
! 561: * this card is truly a pcn card, so we have a special case match for
! 562: * it.
! 563: */
! 564: if (PCI_VENDOR(pa->pa_id) == PCI_VENDOR_TRIDENT &&
! 565: PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_TRIDENT_4DWAVE_DX &&
! 566: PCI_CLASS(pa->pa_class) == PCI_CLASS_NETWORK)
! 567: return(1);
! 568:
! 569: return (pci_matchbyid((struct pci_attach_args *)aux, pcn_devices,
! 570: sizeof(pcn_devices)/sizeof(pcn_devices[0])));
! 571: }
! 572:
! 573: void
! 574: pcn_attach(struct device *parent, struct device *self, void *aux)
! 575: {
! 576: struct pcn_softc *sc = (struct pcn_softc *) self;
! 577: struct pci_attach_args *pa = aux;
! 578: struct ifnet *ifp = &sc->sc_arpcom.ac_if;
! 579: pci_chipset_tag_t pc = pa->pa_pc;
! 580: pci_intr_handle_t ih;
! 581: const char *intrstr = NULL;
! 582: bus_space_tag_t iot, memt;
! 583: bus_space_handle_t ioh, memh;
! 584: bus_dma_segment_t seg;
! 585: int ioh_valid, memh_valid;
! 586: int i, rseg, error;
! 587: pcireg_t pmode;
! 588: uint32_t chipid, reg;
! 589: uint8_t enaddr[ETHER_ADDR_LEN];
! 590: int pmreg;
! 591:
! 592: timeout_set(&sc->sc_tick_timeout, pcn_tick, sc);
! 593:
! 594: /*
! 595: * Map the device.
! 596: */
! 597: ioh_valid = (pci_mapreg_map(pa, PCN_PCI_CBIO, PCI_MAPREG_TYPE_IO, 0,
! 598: &iot, &ioh, NULL, NULL, 0) == 0);
! 599: memh_valid = (pci_mapreg_map(pa, PCN_PCI_CBMEM,
! 600: PCI_MAPREG_TYPE_MEM|PCI_MAPREG_MEM_TYPE_32BIT, 0,
! 601: &memt, &memh, NULL, NULL, 0) == 0);
! 602:
! 603: if (memh_valid) {
! 604: sc->sc_st = memt;
! 605: sc->sc_sh = memh;
! 606: } else if (ioh_valid) {
! 607: sc->sc_st = iot;
! 608: sc->sc_sh = ioh;
! 609: } else {
! 610: printf(": unable to map device registers\n");
! 611: return;
! 612: }
! 613:
! 614: sc->sc_dmat = pa->pa_dmat;
! 615:
! 616: /* Get it out of power save mode, if needed. */
! 617: if (pci_get_capability(pc, pa->pa_tag, PCI_CAP_PWRMGMT, &pmreg, 0)) {
! 618: pmode = pci_conf_read(pc, pa->pa_tag, pmreg + PCI_PMCSR) &
! 619: PCI_PMCSR_STATE_MASK;
! 620: if (pmode == PCI_PMCSR_STATE_D3) {
! 621: /*
! 622: * The card has lost all configuration data in
! 623: * this state, so punt.
! 624: */
! 625: printf(": unable to wake from power state D3\n");
! 626: return;
! 627: }
! 628: if (pmode != PCI_PMCSR_STATE_D0) {
! 629: printf(": waking up from power date D%d",
! 630: pmode);
! 631: pci_conf_write(pc, pa->pa_tag, pmreg + PCI_PMCSR,
! 632: PCI_PMCSR_STATE_D0);
! 633: }
! 634: }
! 635:
! 636: /*
! 637: * Reset the chip to a known state. This also puts the
! 638: * chip into 32-bit mode.
! 639: */
! 640: pcn_reset(sc);
! 641:
! 642: #if !defined(PCN_NO_PROM)
! 643:
! 644: /*
! 645: * Read the Ethernet address from the EEPROM.
! 646: */
! 647: for (i = 0; i < ETHER_ADDR_LEN; i++)
! 648: enaddr[i] = bus_space_read_1(sc->sc_st, sc->sc_sh,
! 649: PCN32_APROM + i);
! 650: #else
! 651: /*
! 652: * The PROM is not used; instead we assume that the MAC address
! 653: * has been programmed into the device's physical address
! 654: * registers by the boot firmware
! 655: */
! 656:
! 657: for (i=0; i < 3; i++) {
! 658: uint32_t val;
! 659: val = pcn_csr_read(sc, LE_CSR12 + i);
! 660: enaddr[2*i] = val & 0x0ff;
! 661: enaddr[2*i+1] = (val >> 8) & 0x0ff;
! 662: }
! 663: #endif
! 664:
! 665: /*
! 666: * Now that the device is mapped, attempt to figure out what
! 667: * kind of chip we have. Note that IDL has all 32 bits of
! 668: * the chip ID when we're in 32-bit mode.
! 669: */
! 670: chipid = pcn_csr_read(sc, LE_CSR88);
! 671: sc->sc_variant = pcn_lookup_variant(CHIPID_PARTID(chipid));
! 672:
! 673: /*
! 674: * Map and establish our interrupt.
! 675: */
! 676: if (pci_intr_map(pa, &ih)) {
! 677: printf(": unable to map interrupt\n");
! 678: return;
! 679: }
! 680: intrstr = pci_intr_string(pc, ih);
! 681: sc->sc_ih = pci_intr_establish(pc, ih, IPL_NET, pcn_intr, sc,
! 682: self->dv_xname);
! 683: if (sc->sc_ih == NULL) {
! 684: printf(": unable to establish interrupt");
! 685: if (intrstr != NULL)
! 686: printf(" at %s", intrstr);
! 687: printf("\n");
! 688: return;
! 689: }
! 690:
! 691: /*
! 692: * Allocate the control data structures, and create and load the
! 693: * DMA map for it.
! 694: */
! 695: if ((error = bus_dmamem_alloc(sc->sc_dmat,
! 696: sizeof(struct pcn_control_data), PAGE_SIZE, 0, &seg, 1, &rseg,
! 697: 0)) != 0) {
! 698: printf(": unable to allocate control data, error = %d\n",
! 699: error);
! 700: return;
! 701: }
! 702:
! 703: if ((error = bus_dmamem_map(sc->sc_dmat, &seg, rseg,
! 704: sizeof(struct pcn_control_data), (caddr_t *)&sc->sc_control_data,
! 705: BUS_DMA_COHERENT)) != 0) {
! 706: printf(": unable to map control data, error = %d\n",
! 707: error);
! 708: goto fail_1;
! 709: }
! 710:
! 711: if ((error = bus_dmamap_create(sc->sc_dmat,
! 712: sizeof(struct pcn_control_data), 1,
! 713: sizeof(struct pcn_control_data), 0, 0, &sc->sc_cddmamap)) != 0) {
! 714: printf(": unable to create control data DMA map, "
! 715: "error = %d\n", error);
! 716: goto fail_2;
! 717: }
! 718:
! 719: if ((error = bus_dmamap_load(sc->sc_dmat, sc->sc_cddmamap,
! 720: sc->sc_control_data, sizeof(struct pcn_control_data), NULL,
! 721: 0)) != 0) {
! 722: printf(": unable to load control data DMA map, error = %d\n",
! 723: error);
! 724: goto fail_3;
! 725: }
! 726:
! 727: /* Create the transmit buffer DMA maps. */
! 728: for (i = 0; i < PCN_TXQUEUELEN; i++) {
! 729: if ((error = bus_dmamap_create(sc->sc_dmat, MCLBYTES,
! 730: PCN_NTXSEGS, MCLBYTES, 0, 0,
! 731: &sc->sc_txsoft[i].txs_dmamap)) != 0) {
! 732: printf(": unable to create tx DMA map %d, "
! 733: "error = %d\n", i, error);
! 734: goto fail_4;
! 735: }
! 736: }
! 737:
! 738: /* Create the receive buffer DMA maps. */
! 739: for (i = 0; i < PCN_NRXDESC; i++) {
! 740: if ((error = bus_dmamap_create(sc->sc_dmat, MCLBYTES, 1,
! 741: MCLBYTES, 0, 0, &sc->sc_rxsoft[i].rxs_dmamap)) != 0) {
! 742: printf(": unable to create rx DMA map %d, "
! 743: "error = %d\n", i, error);
! 744: goto fail_5;
! 745: }
! 746: sc->sc_rxsoft[i].rxs_mbuf = NULL;
! 747: }
! 748:
! 749: printf(", %s, rev %d: %s, address %s\n", sc->sc_variant->pcv_desc,
! 750: CHIPID_VER(chipid), intrstr, ether_sprintf(enaddr));
! 751:
! 752: /* Initialize our media structures. */
! 753: (*sc->sc_variant->pcv_mediainit)(sc);
! 754:
! 755: /*
! 756: * Initialize FIFO watermark info.
! 757: */
! 758: switch (sc->sc_variant->pcv_chipid) {
! 759: case PARTID_Am79c970:
! 760: case PARTID_Am79c970A:
! 761: sc->sc_rcvfw_desc = pcn_79c970_rcvfw;
! 762: sc->sc_xmtsp_desc = pcn_79c970_xmtsp;
! 763: sc->sc_xmtfw_desc = pcn_79c970_xmtfw;
! 764: break;
! 765:
! 766: default:
! 767: sc->sc_rcvfw_desc = pcn_79c971_rcvfw;
! 768: /*
! 769: * Read BCR25 to determine how much SRAM is
! 770: * on the board. If > 0, then we the chip
! 771: * uses different Start Point thresholds.
! 772: *
! 773: * Note BCR25 and BCR26 are loaded from the
! 774: * EEPROM on RST, and unaffected by S_RESET,
! 775: * so we don't really have to worry about
! 776: * them except for this.
! 777: */
! 778: reg = pcn_bcr_read(sc, LE_BCR25) & 0x00ff;
! 779: if (reg != 0)
! 780: sc->sc_xmtsp_desc = pcn_79c971_xmtsp_sram;
! 781: else
! 782: sc->sc_xmtsp_desc = pcn_79c971_xmtsp;
! 783: sc->sc_xmtfw_desc = pcn_79c971_xmtfw;
! 784: break;
! 785: }
! 786:
! 787: /*
! 788: * Set up defaults -- see the tables above for what these
! 789: * values mean.
! 790: *
! 791: * XXX How should we tune RCVFW and XMTFW?
! 792: */
! 793: sc->sc_rcvfw = 1; /* minimum for full-duplex */
! 794: sc->sc_xmtsp = 1;
! 795: sc->sc_xmtfw = 0;
! 796:
! 797: ifp = &sc->sc_arpcom.ac_if;
! 798: bcopy(enaddr, sc->sc_arpcom.ac_enaddr, ETHER_ADDR_LEN);
! 799: bcopy(sc->sc_dev.dv_xname, ifp->if_xname, IFNAMSIZ);
! 800: ifp->if_softc = sc;
! 801: ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
! 802: ifp->if_ioctl = pcn_ioctl;
! 803: ifp->if_start = pcn_start;
! 804: ifp->if_watchdog = pcn_watchdog;
! 805: IFQ_SET_MAXLEN(&ifp->if_snd, PCN_NTXDESC -1);
! 806: IFQ_SET_READY(&ifp->if_snd);
! 807:
! 808: /* Attach the interface. */
! 809: if_attach(ifp);
! 810: ether_ifattach(ifp);
! 811:
! 812: /* Make sure the interface is shutdown during reboot. */
! 813: sc->sc_sdhook = shutdownhook_establish(pcn_shutdown, sc);
! 814: if (sc->sc_sdhook == NULL)
! 815: printf("%s: WARNING: unable to establish shutdown hook\n",
! 816: sc->sc_dev.dv_xname);
! 817: return;
! 818:
! 819: /*
! 820: * Free any resources we've allocated during the failed attach
! 821: * attempt. Do this in reverse order and fall through.
! 822: */
! 823: fail_5:
! 824: for (i = 0; i < PCN_NRXDESC; i++) {
! 825: if (sc->sc_rxsoft[i].rxs_dmamap != NULL)
! 826: bus_dmamap_destroy(sc->sc_dmat,
! 827: sc->sc_rxsoft[i].rxs_dmamap);
! 828: }
! 829: fail_4:
! 830: for (i = 0; i < PCN_TXQUEUELEN; i++) {
! 831: if (sc->sc_txsoft[i].txs_dmamap != NULL)
! 832: bus_dmamap_destroy(sc->sc_dmat,
! 833: sc->sc_txsoft[i].txs_dmamap);
! 834: }
! 835: bus_dmamap_unload(sc->sc_dmat, sc->sc_cddmamap);
! 836: fail_3:
! 837: bus_dmamap_destroy(sc->sc_dmat, sc->sc_cddmamap);
! 838: fail_2:
! 839: bus_dmamem_unmap(sc->sc_dmat, (caddr_t)sc->sc_control_data,
! 840: sizeof(struct pcn_control_data));
! 841: fail_1:
! 842: bus_dmamem_free(sc->sc_dmat, &seg, rseg);
! 843: }
! 844:
! 845: /*
! 846: * pcn_shutdown:
! 847: *
! 848: * Make sure the interface is stopped at reboot time.
! 849: */
! 850: void
! 851: pcn_shutdown(void *arg)
! 852: {
! 853: struct pcn_softc *sc = arg;
! 854:
! 855: pcn_stop(&sc->sc_arpcom.ac_if, 1);
! 856: pcn_reset(sc);
! 857: }
! 858:
! 859: /*
! 860: * pcn_start: [ifnet interface function]
! 861: *
! 862: * Start packet transmission on the interface.
! 863: */
! 864: void
! 865: pcn_start(struct ifnet *ifp)
! 866: {
! 867: struct pcn_softc *sc = ifp->if_softc;
! 868: struct mbuf *m0, *m;
! 869: struct pcn_txsoft *txs;
! 870: bus_dmamap_t dmamap;
! 871: int error, nexttx, lasttx = -1, ofree, seg;
! 872:
! 873: if ((ifp->if_flags & (IFF_RUNNING|IFF_OACTIVE)) != IFF_RUNNING)
! 874: return;
! 875:
! 876: /*
! 877: * Remember the previous number of free descriptors and
! 878: * the first descriptor we'll use.
! 879: */
! 880: ofree = sc->sc_txfree;
! 881:
! 882: /*
! 883: * Loop through the send queue, setting up transmit descriptors
! 884: * until we drain the queue, or use up all available transmit
! 885: * descriptors.
! 886: */
! 887: for (;;) {
! 888: /* Grab a packet off the queue. */
! 889: IFQ_POLL(&ifp->if_snd, m0);
! 890: if (m0 == NULL)
! 891: break;
! 892: m = NULL;
! 893:
! 894: /* Get a work queue entry. */
! 895: if (sc->sc_txsfree == 0)
! 896: break;
! 897:
! 898: txs = &sc->sc_txsoft[sc->sc_txsnext];
! 899: dmamap = txs->txs_dmamap;
! 900:
! 901: /*
! 902: * Load the DMA map. If this fails, the packet either
! 903: * didn't fit in the alloted number of segments, or we
! 904: * were short on resources. In this case, we'll copy
! 905: * and try again.
! 906: */
! 907: if (bus_dmamap_load_mbuf(sc->sc_dmat, dmamap, m0,
! 908: BUS_DMA_WRITE|BUS_DMA_NOWAIT) != 0) {
! 909: MGETHDR(m, M_DONTWAIT, MT_DATA);
! 910: if (m == NULL)
! 911: break;
! 912: if (m0->m_pkthdr.len > MHLEN) {
! 913: MCLGET(m, M_DONTWAIT);
! 914: if ((m->m_flags & M_EXT) == 0) {
! 915: m_freem(m);
! 916: break;
! 917: }
! 918: }
! 919: m_copydata(m0, 0, m0->m_pkthdr.len, mtod(m, caddr_t));
! 920: m->m_pkthdr.len = m->m_len = m0->m_pkthdr.len;
! 921: error = bus_dmamap_load_mbuf(sc->sc_dmat, dmamap,
! 922: m, BUS_DMA_WRITE|BUS_DMA_NOWAIT);
! 923: if (error)
! 924: break;
! 925: }
! 926:
! 927: /*
! 928: * Ensure we have enough descriptors free to describe
! 929: * the packet. Note, we always reserve one descriptor
! 930: * at the end of the ring as a termination point, to
! 931: * prevent wrap-around.
! 932: */
! 933: if (dmamap->dm_nsegs > (sc->sc_txfree - 1)) {
! 934: /*
! 935: * Not enough free descriptors to transmit this
! 936: * packet. We haven't committed anything yet,
! 937: * so just unload the DMA map, put the packet
! 938: * back on the queue, and punt. Notify the upper
! 939: * layer that there are not more slots left.
! 940: *
! 941: * XXX We could allocate an mbuf and copy, but
! 942: * XXX is it worth it?
! 943: */
! 944: ifp->if_flags |= IFF_OACTIVE;
! 945: bus_dmamap_unload(sc->sc_dmat, dmamap);
! 946: if (m != NULL)
! 947: m_freem(m);
! 948: break;
! 949: }
! 950:
! 951: IFQ_DEQUEUE(&ifp->if_snd, m0);
! 952: if (m != NULL) {
! 953: m_freem(m0);
! 954: m0 = m;
! 955: }
! 956:
! 957: /*
! 958: * WE ARE NOW COMMITTED TO TRANSMITTING THE PACKET.
! 959: */
! 960:
! 961: /* Sync the DMA map. */
! 962: bus_dmamap_sync(sc->sc_dmat, dmamap, 0, dmamap->dm_mapsize,
! 963: BUS_DMASYNC_PREWRITE);
! 964:
! 965: /*
! 966: * Initialize the transmit descriptors.
! 967: */
! 968: if (sc->sc_swstyle == LE_B20_SSTYLE_PCNETPCI3) {
! 969: for (nexttx = sc->sc_txnext, seg = 0;
! 970: seg < dmamap->dm_nsegs;
! 971: seg++, nexttx = PCN_NEXTTX(nexttx)) {
! 972: /*
! 973: * If this is the first descriptor we're
! 974: * enqueueing, don't set the OWN bit just
! 975: * yet. That could cause a race condition.
! 976: * We'll do it below.
! 977: */
! 978: sc->sc_txdescs[nexttx].tmd0 = 0;
! 979: sc->sc_txdescs[nexttx].tmd2 =
! 980: htole32(dmamap->dm_segs[seg].ds_addr);
! 981: sc->sc_txdescs[nexttx].tmd1 =
! 982: htole32(LE_T1_ONES |
! 983: (nexttx == sc->sc_txnext ? 0 : LE_T1_OWN) |
! 984: (LE_BCNT(dmamap->dm_segs[seg].ds_len) &
! 985: LE_T1_BCNT_MASK));
! 986: lasttx = nexttx;
! 987: }
! 988: } else {
! 989: for (nexttx = sc->sc_txnext, seg = 0;
! 990: seg < dmamap->dm_nsegs;
! 991: seg++, nexttx = PCN_NEXTTX(nexttx)) {
! 992: /*
! 993: * If this is the first descriptor we're
! 994: * enqueueing, don't set the OWN bit just
! 995: * yet. That could cause a race condition.
! 996: * We'll do it below.
! 997: */
! 998: sc->sc_txdescs[nexttx].tmd0 =
! 999: htole32(dmamap->dm_segs[seg].ds_addr);
! 1000: sc->sc_txdescs[nexttx].tmd2 = 0;
! 1001: sc->sc_txdescs[nexttx].tmd1 =
! 1002: htole32(LE_T1_ONES |
! 1003: (nexttx == sc->sc_txnext ? 0 : LE_T1_OWN) |
! 1004: (LE_BCNT(dmamap->dm_segs[seg].ds_len) &
! 1005: LE_T1_BCNT_MASK));
! 1006: lasttx = nexttx;
! 1007: }
! 1008: }
! 1009:
! 1010: KASSERT(lasttx != -1);
! 1011: /* Interrupt on the packet, if appropriate. */
! 1012: if ((sc->sc_txsnext & PCN_TXINTR_MASK) == 0)
! 1013: sc->sc_txdescs[lasttx].tmd1 |= htole32(LE_T1_LTINT);
! 1014:
! 1015: /* Set `start of packet' and `end of packet' appropriately. */
! 1016: sc->sc_txdescs[lasttx].tmd1 |= htole32(LE_T1_ENP);
! 1017: sc->sc_txdescs[sc->sc_txnext].tmd1 |=
! 1018: htole32(LE_T1_OWN|LE_T1_STP);
! 1019:
! 1020: /* Sync the descriptors we're using. */
! 1021: PCN_CDTXSYNC(sc, sc->sc_txnext, dmamap->dm_nsegs,
! 1022: BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE);
! 1023:
! 1024: /* Kick the transmitter. */
! 1025: pcn_csr_write(sc, LE_CSR0, LE_C0_INEA|LE_C0_TDMD);
! 1026:
! 1027: /*
! 1028: * Store a pointer to the packet so we can free it later,
! 1029: * and remember what txdirty will be once the packet is
! 1030: * done.
! 1031: */
! 1032: txs->txs_mbuf = m0;
! 1033: txs->txs_firstdesc = sc->sc_txnext;
! 1034: txs->txs_lastdesc = lasttx;
! 1035:
! 1036: /* Advance the tx pointer. */
! 1037: sc->sc_txfree -= dmamap->dm_nsegs;
! 1038: sc->sc_txnext = nexttx;
! 1039:
! 1040: sc->sc_txsfree--;
! 1041: sc->sc_txsnext = PCN_NEXTTXS(sc->sc_txsnext);
! 1042:
! 1043: #if NBPFILTER > 0
! 1044: /* Pass the packet to any BPF listeners. */
! 1045: if (ifp->if_bpf)
! 1046: bpf_mtap(ifp->if_bpf, m0, BPF_DIRECTION_OUT);
! 1047: #endif /* NBPFILTER > 0 */
! 1048: }
! 1049:
! 1050: if (sc->sc_txsfree == 0 || sc->sc_txfree == 0) {
! 1051: /* No more slots left; notify upper layer. */
! 1052: ifp->if_flags |= IFF_OACTIVE;
! 1053: }
! 1054:
! 1055: if (sc->sc_txfree != ofree) {
! 1056: /* Set a watchdog timer in case the chip flakes out. */
! 1057: ifp->if_timer = 5;
! 1058: }
! 1059: }
! 1060:
! 1061: /*
! 1062: * pcn_watchdog: [ifnet interface function]
! 1063: *
! 1064: * Watchdog timer handler.
! 1065: */
! 1066: void
! 1067: pcn_watchdog(struct ifnet *ifp)
! 1068: {
! 1069: struct pcn_softc *sc = ifp->if_softc;
! 1070:
! 1071: /*
! 1072: * Since we're not interrupting every packet, sweep
! 1073: * up before we report an error.
! 1074: */
! 1075: pcn_txintr(sc);
! 1076:
! 1077: if (sc->sc_txfree != PCN_NTXDESC) {
! 1078: printf("%s: device timeout (txfree %d txsfree %d)\n",
! 1079: sc->sc_dev.dv_xname, sc->sc_txfree, sc->sc_txsfree);
! 1080: ifp->if_oerrors++;
! 1081:
! 1082: /* Reset the interface. */
! 1083: (void) pcn_init(ifp);
! 1084: }
! 1085:
! 1086: /* Try to get more packets going. */
! 1087: pcn_start(ifp);
! 1088: }
! 1089:
! 1090: /*
! 1091: * pcn_ioctl: [ifnet interface function]
! 1092: *
! 1093: * Handle control requests from the operator.
! 1094: */
! 1095: int
! 1096: pcn_ioctl(struct ifnet *ifp, u_long cmd, caddr_t data)
! 1097: {
! 1098: struct pcn_softc *sc = ifp->if_softc;
! 1099: struct ifreq *ifr = (struct ifreq *) data;
! 1100: struct ifaddr *ifa = (struct ifaddr *)data;
! 1101: int s, error = 0;
! 1102:
! 1103: s = splnet();
! 1104:
! 1105: if ((error = ether_ioctl(ifp, &sc->sc_arpcom, cmd, data)) > 0) {
! 1106: /* Try to get more packets going. */
! 1107: pcn_start(ifp);
! 1108:
! 1109: splx(s);
! 1110: return (error);
! 1111: }
! 1112:
! 1113: switch (cmd) {
! 1114: case SIOCSIFADDR:
! 1115: ifp->if_flags |= IFF_UP;
! 1116:
! 1117: switch (ifa->ifa_addr->sa_family) {
! 1118: #ifdef INET
! 1119: case AF_INET:
! 1120: pcn_init(ifp);
! 1121: arp_ifinit(&sc->sc_arpcom, ifa);
! 1122: break;
! 1123: #endif
! 1124: default:
! 1125: pcn_init(ifp);
! 1126: break;
! 1127: }
! 1128: break;
! 1129:
! 1130: case SIOCSIFMTU:
! 1131: if (ifr->ifr_mtu > ETHERMTU || ifr->ifr_mtu < ETHERMIN)
! 1132: error = EINVAL;
! 1133: else if (ifp->if_mtu != ifr->ifr_mtu)
! 1134: ifp->if_mtu = ifr->ifr_mtu;
! 1135: break;
! 1136:
! 1137: case SIOCSIFFLAGS:
! 1138: /*
! 1139: * If interface is marked up and not running, then start it.
! 1140: * If it is marked down and running, stop it.
! 1141: * XXX If it's up then re-initialize it. This is so flags
! 1142: * such as IFF_PROMISC are handled.
! 1143: */
! 1144: if (ifp->if_flags & IFF_UP)
! 1145: pcn_init(ifp);
! 1146: else if (ifp->if_flags & IFF_RUNNING)
! 1147: pcn_stop(ifp, 1);
! 1148: break;
! 1149:
! 1150: case SIOCADDMULTI:
! 1151: case SIOCDELMULTI:
! 1152: error = (cmd == SIOCADDMULTI) ?
! 1153: ether_addmulti(ifr, &sc->sc_arpcom) :
! 1154: ether_delmulti(ifr, &sc->sc_arpcom);
! 1155:
! 1156: if (error == ENETRESET) {
! 1157: /*
! 1158: * Multicast list has changed; set the hardware
! 1159: * filter accordingly.
! 1160: */
! 1161: if (ifp->if_flags & IFF_RUNNING)
! 1162: error = pcn_init(ifp);
! 1163: else
! 1164: error = 0;
! 1165: }
! 1166: break;
! 1167:
! 1168: case SIOCSIFMEDIA:
! 1169: case SIOCGIFMEDIA:
! 1170: error = ifmedia_ioctl(ifp, ifr, &sc->sc_mii.mii_media, cmd);
! 1171: break;
! 1172:
! 1173: default:
! 1174: error = ENOTTY;
! 1175: }
! 1176:
! 1177: /* Try to get more packets going. */
! 1178: pcn_start(ifp);
! 1179:
! 1180: splx(s);
! 1181: return (error);
! 1182: }
! 1183:
! 1184: /*
! 1185: * pcn_intr:
! 1186: *
! 1187: * Interrupt service routine.
! 1188: */
! 1189: int
! 1190: pcn_intr(void *arg)
! 1191: {
! 1192: struct pcn_softc *sc = arg;
! 1193: struct ifnet *ifp = &sc->sc_arpcom.ac_if;
! 1194: uint32_t csr0;
! 1195: int wantinit, handled = 0;
! 1196:
! 1197: for (wantinit = 0; wantinit == 0;) {
! 1198: csr0 = pcn_csr_read(sc, LE_CSR0);
! 1199: if ((csr0 & LE_C0_INTR) == 0)
! 1200: break;
! 1201:
! 1202: /* ACK the bits and re-enable interrupts. */
! 1203: pcn_csr_write(sc, LE_CSR0, csr0 &
! 1204: (LE_C0_INEA|LE_C0_BABL|LE_C0_MISS|LE_C0_MERR|LE_C0_RINT|
! 1205: LE_C0_TINT|LE_C0_IDON));
! 1206:
! 1207: handled = 1;
! 1208:
! 1209: if (csr0 & LE_C0_RINT)
! 1210: wantinit = pcn_rxintr(sc);
! 1211:
! 1212: if (csr0 & LE_C0_TINT)
! 1213: pcn_txintr(sc);
! 1214:
! 1215: if (csr0 & LE_C0_ERR) {
! 1216: if (csr0 & LE_C0_BABL)
! 1217: ifp->if_oerrors++;
! 1218: if (csr0 & LE_C0_MISS)
! 1219: ifp->if_ierrors++;
! 1220: if (csr0 & LE_C0_MERR) {
! 1221: printf("%s: memory error\n",
! 1222: sc->sc_dev.dv_xname);
! 1223: wantinit = 1;
! 1224: break;
! 1225: }
! 1226: }
! 1227:
! 1228: if ((csr0 & LE_C0_RXON) == 0) {
! 1229: printf("%s: receiver disabled\n",
! 1230: sc->sc_dev.dv_xname);
! 1231: ifp->if_ierrors++;
! 1232: wantinit = 1;
! 1233: }
! 1234:
! 1235: if ((csr0 & LE_C0_TXON) == 0) {
! 1236: printf("%s: transmitter disabled\n",
! 1237: sc->sc_dev.dv_xname);
! 1238: ifp->if_oerrors++;
! 1239: wantinit = 1;
! 1240: }
! 1241: }
! 1242:
! 1243: if (handled) {
! 1244: if (wantinit)
! 1245: pcn_init(ifp);
! 1246:
! 1247: /* Try to get more packets going. */
! 1248: pcn_start(ifp);
! 1249: }
! 1250:
! 1251: return (handled);
! 1252: }
! 1253:
! 1254: /*
! 1255: * pcn_spnd:
! 1256: *
! 1257: * Suspend the chip.
! 1258: */
! 1259: void
! 1260: pcn_spnd(struct pcn_softc *sc)
! 1261: {
! 1262: int i;
! 1263:
! 1264: pcn_csr_write(sc, LE_CSR5, sc->sc_csr5 | LE_C5_SPND);
! 1265:
! 1266: for (i = 0; i < 10000; i++) {
! 1267: if (pcn_csr_read(sc, LE_CSR5) & LE_C5_SPND)
! 1268: return;
! 1269: delay(5);
! 1270: }
! 1271:
! 1272: printf("%s: WARNING: chip failed to enter suspended state\n",
! 1273: sc->sc_dev.dv_xname);
! 1274: }
! 1275:
! 1276: /*
! 1277: * pcn_txintr:
! 1278: *
! 1279: * Helper; handle transmit interrupts.
! 1280: */
! 1281: void
! 1282: pcn_txintr(struct pcn_softc *sc)
! 1283: {
! 1284: struct ifnet *ifp = &sc->sc_arpcom.ac_if;
! 1285: struct pcn_txsoft *txs;
! 1286: uint32_t tmd1, tmd2, tmd;
! 1287: int i, j;
! 1288:
! 1289: ifp->if_flags &= ~IFF_OACTIVE;
! 1290:
! 1291: /*
! 1292: * Go through our Tx list and free mbufs for those
! 1293: * frames which have been transmitted.
! 1294: */
! 1295: for (i = sc->sc_txsdirty; sc->sc_txsfree != PCN_TXQUEUELEN;
! 1296: i = PCN_NEXTTXS(i), sc->sc_txsfree++) {
! 1297: txs = &sc->sc_txsoft[i];
! 1298:
! 1299: PCN_CDTXSYNC(sc, txs->txs_firstdesc, txs->txs_dmamap->dm_nsegs,
! 1300: BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE);
! 1301:
! 1302: tmd1 = letoh32(sc->sc_txdescs[txs->txs_lastdesc].tmd1);
! 1303: if (tmd1 & LE_T1_OWN)
! 1304: break;
! 1305:
! 1306: /*
! 1307: * Slightly annoying -- we have to loop through the
! 1308: * descriptors we've used looking for ERR, since it
! 1309: * can appear on any descriptor in the chain.
! 1310: */
! 1311: for (j = txs->txs_firstdesc;; j = PCN_NEXTTX(j)) {
! 1312: tmd = letoh32(sc->sc_txdescs[j].tmd1);
! 1313: if (tmd & LE_T1_ERR) {
! 1314: ifp->if_oerrors++;
! 1315: if (sc->sc_swstyle == LE_B20_SSTYLE_PCNETPCI3)
! 1316: tmd2 = letoh32(sc->sc_txdescs[j].tmd0);
! 1317: else
! 1318: tmd2 = letoh32(sc->sc_txdescs[j].tmd2);
! 1319: if (tmd2 & LE_T2_UFLO) {
! 1320: if (sc->sc_xmtsp < LE_C80_XMTSP_MAX) {
! 1321: sc->sc_xmtsp++;
! 1322: printf("%s: transmit "
! 1323: "underrun; new threshold: "
! 1324: "%s\n",
! 1325: sc->sc_dev.dv_xname,
! 1326: sc->sc_xmtsp_desc[
! 1327: sc->sc_xmtsp]);
! 1328: pcn_spnd(sc);
! 1329: pcn_csr_write(sc, LE_CSR80,
! 1330: LE_C80_RCVFW(sc->sc_rcvfw) |
! 1331: LE_C80_XMTSP(sc->sc_xmtsp) |
! 1332: LE_C80_XMTFW(sc->sc_xmtfw));
! 1333: pcn_csr_write(sc, LE_CSR5,
! 1334: sc->sc_csr5);
! 1335: } else {
! 1336: printf("%s: transmit "
! 1337: "underrun\n",
! 1338: sc->sc_dev.dv_xname);
! 1339: }
! 1340: } else if (tmd2 & LE_T2_BUFF) {
! 1341: printf("%s: transmit buffer error\n",
! 1342: sc->sc_dev.dv_xname);
! 1343: }
! 1344: if (tmd2 & LE_T2_LCOL)
! 1345: ifp->if_collisions++;
! 1346: if (tmd2 & LE_T2_RTRY)
! 1347: ifp->if_collisions += 16;
! 1348: goto next_packet;
! 1349: }
! 1350: if (j == txs->txs_lastdesc)
! 1351: break;
! 1352: }
! 1353: if (tmd1 & LE_T1_ONE)
! 1354: ifp->if_collisions++;
! 1355: else if (tmd & LE_T1_MORE) {
! 1356: /* Real number is unknown. */
! 1357: ifp->if_collisions += 2;
! 1358: }
! 1359: ifp->if_opackets++;
! 1360: next_packet:
! 1361: sc->sc_txfree += txs->txs_dmamap->dm_nsegs;
! 1362: bus_dmamap_sync(sc->sc_dmat, txs->txs_dmamap,
! 1363: 0, txs->txs_dmamap->dm_mapsize, BUS_DMASYNC_POSTWRITE);
! 1364: bus_dmamap_unload(sc->sc_dmat, txs->txs_dmamap);
! 1365: m_freem(txs->txs_mbuf);
! 1366: txs->txs_mbuf = NULL;
! 1367: }
! 1368:
! 1369: /* Update the dirty transmit buffer pointer. */
! 1370: sc->sc_txsdirty = i;
! 1371:
! 1372: /*
! 1373: * If there are no more pending transmissions, cancel the watchdog
! 1374: * timer.
! 1375: */
! 1376: if (sc->sc_txsfree == PCN_TXQUEUELEN)
! 1377: ifp->if_timer = 0;
! 1378: }
! 1379:
! 1380: /*
! 1381: * pcn_rxintr:
! 1382: *
! 1383: * Helper; handle receive interrupts.
! 1384: */
! 1385: int
! 1386: pcn_rxintr(struct pcn_softc *sc)
! 1387: {
! 1388: struct ifnet *ifp = &sc->sc_arpcom.ac_if;
! 1389: struct pcn_rxsoft *rxs;
! 1390: struct mbuf *m;
! 1391: uint32_t rmd1;
! 1392: int i, len;
! 1393:
! 1394: for (i = sc->sc_rxptr;; i = PCN_NEXTRX(i)) {
! 1395: rxs = &sc->sc_rxsoft[i];
! 1396:
! 1397: PCN_CDRXSYNC(sc, i, BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE);
! 1398:
! 1399: rmd1 = letoh32(sc->sc_rxdescs[i].rmd1);
! 1400:
! 1401: if (rmd1 & LE_R1_OWN)
! 1402: break;
! 1403:
! 1404: /*
! 1405: * Check for errors and make sure the packet fit into
! 1406: * a single buffer. We have structured this block of
! 1407: * code the way it is in order to compress it into
! 1408: * one test in the common case (no error).
! 1409: */
! 1410: if (__predict_false((rmd1 & (LE_R1_STP|LE_R1_ENP|LE_R1_ERR)) !=
! 1411: (LE_R1_STP|LE_R1_ENP))) {
! 1412: /* Make sure the packet is in a single buffer. */
! 1413: if ((rmd1 & (LE_R1_STP|LE_R1_ENP)) !=
! 1414: (LE_R1_STP|LE_R1_ENP)) {
! 1415: printf("%s: packet spilled into next buffer\n",
! 1416: sc->sc_dev.dv_xname);
! 1417: return (1); /* pcn_intr() will re-init */
! 1418: }
! 1419:
! 1420: /*
! 1421: * If the packet had an error, simple recycle the
! 1422: * buffer.
! 1423: */
! 1424: if (rmd1 & LE_R1_ERR) {
! 1425: ifp->if_ierrors++;
! 1426: /*
! 1427: * If we got an overflow error, chances
! 1428: * are there will be a CRC error. In
! 1429: * this case, just print the overflow
! 1430: * error, and skip the others.
! 1431: */
! 1432: if (rmd1 & LE_R1_OFLO)
! 1433: printf("%s: overflow error\n",
! 1434: sc->sc_dev.dv_xname);
! 1435: else {
! 1436: #define PRINTIT(x, str) \
! 1437: if (rmd1 & (x)) \
! 1438: printf("%s: %s\n", \
! 1439: sc->sc_dev.dv_xname, str);
! 1440: PRINTIT(LE_R1_FRAM, "framing error");
! 1441: PRINTIT(LE_R1_CRC, "CRC error");
! 1442: PRINTIT(LE_R1_BUFF, "buffer error");
! 1443: }
! 1444: #undef PRINTIT
! 1445: PCN_INIT_RXDESC(sc, i);
! 1446: continue;
! 1447: }
! 1448: }
! 1449:
! 1450: bus_dmamap_sync(sc->sc_dmat, rxs->rxs_dmamap, 0,
! 1451: rxs->rxs_dmamap->dm_mapsize, BUS_DMASYNC_POSTREAD);
! 1452:
! 1453: /*
! 1454: * No errors; receive the packet.
! 1455: */
! 1456: if (sc->sc_swstyle == LE_B20_SSTYLE_PCNETPCI3)
! 1457: len = letoh32(sc->sc_rxdescs[i].rmd0) & LE_R1_BCNT_MASK;
! 1458: else
! 1459: len = letoh32(sc->sc_rxdescs[i].rmd2) & LE_R1_BCNT_MASK;
! 1460:
! 1461: /*
! 1462: * The LANCE family includes the CRC with every packet;
! 1463: * trim it off here.
! 1464: */
! 1465: len -= ETHER_CRC_LEN;
! 1466:
! 1467: /*
! 1468: * If the packet is small enough to fit in a
! 1469: * single header mbuf, allocate one and copy
! 1470: * the data into it. This greatly reduces
! 1471: * memory consumption when we receive lots
! 1472: * of small packets.
! 1473: *
! 1474: * Otherwise, we add a new buffer to the receive
! 1475: * chain. If this fails, we drop the packet and
! 1476: * recycle the old buffer.
! 1477: */
! 1478: if (pcn_copy_small != 0 && len <= (MHLEN - 2)) {
! 1479: MGETHDR(m, M_DONTWAIT, MT_DATA);
! 1480: if (m == NULL)
! 1481: goto dropit;
! 1482: m->m_data += 2;
! 1483: memcpy(mtod(m, caddr_t),
! 1484: mtod(rxs->rxs_mbuf, caddr_t), len);
! 1485: PCN_INIT_RXDESC(sc, i);
! 1486: bus_dmamap_sync(sc->sc_dmat, rxs->rxs_dmamap, 0,
! 1487: rxs->rxs_dmamap->dm_mapsize,
! 1488: BUS_DMASYNC_PREREAD);
! 1489: } else {
! 1490: m = rxs->rxs_mbuf;
! 1491: if (pcn_add_rxbuf(sc, i) != 0) {
! 1492: dropit:
! 1493: ifp->if_ierrors++;
! 1494: PCN_INIT_RXDESC(sc, i);
! 1495: bus_dmamap_sync(sc->sc_dmat,
! 1496: rxs->rxs_dmamap, 0,
! 1497: rxs->rxs_dmamap->dm_mapsize,
! 1498: BUS_DMASYNC_PREREAD);
! 1499: continue;
! 1500: }
! 1501: }
! 1502:
! 1503: m->m_pkthdr.rcvif = ifp;
! 1504: m->m_pkthdr.len = m->m_len = len;
! 1505:
! 1506: #if NBPFILTER > 0
! 1507: /* Pass this up to any BPF listeners. */
! 1508: if (ifp->if_bpf)
! 1509: bpf_mtap(ifp->if_bpf, m, BPF_DIRECTION_IN);
! 1510: #endif /* NBPFILTER > 0 */
! 1511:
! 1512: /* Pass it on. */
! 1513: ether_input_mbuf(ifp, m);
! 1514: ifp->if_ipackets++;
! 1515: }
! 1516:
! 1517: /* Update the receive pointer. */
! 1518: sc->sc_rxptr = i;
! 1519: return (0);
! 1520: }
! 1521:
! 1522: /*
! 1523: * pcn_tick:
! 1524: *
! 1525: * One second timer, used to tick the MII.
! 1526: */
! 1527: void
! 1528: pcn_tick(void *arg)
! 1529: {
! 1530: struct pcn_softc *sc = arg;
! 1531: int s;
! 1532:
! 1533: s = splnet();
! 1534: mii_tick(&sc->sc_mii);
! 1535: splx(s);
! 1536:
! 1537: timeout_add(&sc->sc_tick_timeout, hz);
! 1538: }
! 1539:
! 1540: /*
! 1541: * pcn_reset:
! 1542: *
! 1543: * Perform a soft reset on the PCnet-PCI.
! 1544: */
! 1545: void
! 1546: pcn_reset(struct pcn_softc *sc)
! 1547: {
! 1548:
! 1549: /*
! 1550: * The PCnet-PCI chip is reset by reading from the
! 1551: * RESET register. Note that while the NE2100 LANCE
! 1552: * boards require a write after the read, the PCnet-PCI
! 1553: * chips do not require this.
! 1554: *
! 1555: * Since we don't know if we're in 16-bit or 32-bit
! 1556: * mode right now, issue both (it's safe) in the
! 1557: * hopes that one will succeed.
! 1558: */
! 1559: (void) bus_space_read_2(sc->sc_st, sc->sc_sh, PCN16_RESET);
! 1560: (void) bus_space_read_4(sc->sc_st, sc->sc_sh, PCN32_RESET);
! 1561:
! 1562: /* Wait 1ms for it to finish. */
! 1563: delay(1000);
! 1564:
! 1565: /*
! 1566: * Select 32-bit I/O mode by issuing a 32-bit write to the
! 1567: * RDP. Since the RAP is 0 after a reset, writing a 0
! 1568: * to RDP is safe (since it simply clears CSR0).
! 1569: */
! 1570: bus_space_write_4(sc->sc_st, sc->sc_sh, PCN32_RDP, 0);
! 1571: }
! 1572:
! 1573: /*
! 1574: * pcn_init: [ifnet interface function]
! 1575: *
! 1576: * Initialize the interface. Must be called at splnet().
! 1577: */
! 1578: int
! 1579: pcn_init(struct ifnet *ifp)
! 1580: {
! 1581: struct pcn_softc *sc = ifp->if_softc;
! 1582: struct pcn_rxsoft *rxs;
! 1583: uint8_t *enaddr = LLADDR(ifp->if_sadl);
! 1584: int i, error = 0;
! 1585: uint32_t reg;
! 1586:
! 1587: /* Cancel any pending I/O. */
! 1588: pcn_stop(ifp, 0);
! 1589:
! 1590: /* Reset the chip to a known state. */
! 1591: pcn_reset(sc);
! 1592:
! 1593: /*
! 1594: * On the Am79c970, select SSTYLE 2, and SSTYLE 3 on everything
! 1595: * else.
! 1596: *
! 1597: * XXX It'd be really nice to use SSTYLE 2 on all the chips,
! 1598: * because the structure layout is compatible with ILACC,
! 1599: * but the burst mode is only available in SSTYLE 3, and
! 1600: * burst mode should provide some performance enhancement.
! 1601: */
! 1602: if (sc->sc_variant->pcv_chipid == PARTID_Am79c970)
! 1603: sc->sc_swstyle = LE_B20_SSTYLE_PCNETPCI2;
! 1604: else
! 1605: sc->sc_swstyle = LE_B20_SSTYLE_PCNETPCI3;
! 1606: pcn_bcr_write(sc, LE_BCR20, sc->sc_swstyle);
! 1607:
! 1608: /* Initialize the transmit descriptor ring. */
! 1609: memset(sc->sc_txdescs, 0, sizeof(sc->sc_txdescs));
! 1610: PCN_CDTXSYNC(sc, 0, PCN_NTXDESC,
! 1611: BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE);
! 1612: sc->sc_txfree = PCN_NTXDESC;
! 1613: sc->sc_txnext = 0;
! 1614:
! 1615: /* Initialize the transmit job descriptors. */
! 1616: for (i = 0; i < PCN_TXQUEUELEN; i++)
! 1617: sc->sc_txsoft[i].txs_mbuf = NULL;
! 1618: sc->sc_txsfree = PCN_TXQUEUELEN;
! 1619: sc->sc_txsnext = 0;
! 1620: sc->sc_txsdirty = 0;
! 1621:
! 1622: /*
! 1623: * Initialize the receive descriptor and receive job
! 1624: * descriptor rings.
! 1625: */
! 1626: for (i = 0; i < PCN_NRXDESC; i++) {
! 1627: rxs = &sc->sc_rxsoft[i];
! 1628: if (rxs->rxs_mbuf == NULL) {
! 1629: if ((error = pcn_add_rxbuf(sc, i)) != 0) {
! 1630: printf("%s: unable to allocate or map rx "
! 1631: "buffer %d, error = %d\n",
! 1632: sc->sc_dev.dv_xname, i, error);
! 1633: /*
! 1634: * XXX Should attempt to run with fewer receive
! 1635: * XXX buffers instead of just failing.
! 1636: */
! 1637: pcn_rxdrain(sc);
! 1638: goto out;
! 1639: }
! 1640: } else
! 1641: PCN_INIT_RXDESC(sc, i);
! 1642: }
! 1643: sc->sc_rxptr = 0;
! 1644:
! 1645: /* Initialize MODE for the initialization block. */
! 1646: sc->sc_mode = 0;
! 1647: if (ifp->if_flags & IFF_PROMISC)
! 1648: sc->sc_mode |= LE_C15_PROM;
! 1649: if ((ifp->if_flags & IFF_BROADCAST) == 0)
! 1650: sc->sc_mode |= LE_C15_DRCVBC;
! 1651:
! 1652: /*
! 1653: * If we have MII, simply select MII in the MODE register,
! 1654: * and clear ASEL. Otherwise, let ASEL stand (for now),
! 1655: * and leave PORTSEL alone (it is ignored with ASEL is set).
! 1656: */
! 1657: if (sc->sc_flags & PCN_F_HAS_MII) {
! 1658: pcn_bcr_write(sc, LE_BCR2,
! 1659: pcn_bcr_read(sc, LE_BCR2) & ~LE_B2_ASEL);
! 1660: sc->sc_mode |= LE_C15_PORTSEL(PORTSEL_MII);
! 1661:
! 1662: /*
! 1663: * Disable MII auto-negotiation. We handle that in
! 1664: * our own MII layer.
! 1665: */
! 1666: pcn_bcr_write(sc, LE_BCR32,
! 1667: pcn_bcr_read(sc, LE_BCR32) | LE_B32_DANAS);
! 1668: }
! 1669:
! 1670: /*
! 1671: * Set the Tx and Rx descriptor ring addresses in the init
! 1672: * block, the TLEN and RLEN other fields of the init block
! 1673: * MODE register.
! 1674: */
! 1675: sc->sc_initblock.init_rdra = htole32(PCN_CDRXADDR(sc, 0));
! 1676: sc->sc_initblock.init_tdra = htole32(PCN_CDTXADDR(sc, 0));
! 1677: sc->sc_initblock.init_mode = htole32(sc->sc_mode |
! 1678: ((ffs(PCN_NTXDESC) - 1) << 28) |
! 1679: ((ffs(PCN_NRXDESC) - 1) << 20));
! 1680:
! 1681: /* Set the station address in the init block. */
! 1682: sc->sc_initblock.init_padr[0] = htole32(enaddr[0] |
! 1683: (enaddr[1] << 8) | (enaddr[2] << 16) | (enaddr[3] << 24));
! 1684: sc->sc_initblock.init_padr[1] = htole32(enaddr[4] |
! 1685: (enaddr[5] << 8));
! 1686:
! 1687: /* Set the multicast filter in the init block. */
! 1688: pcn_set_filter(sc);
! 1689:
! 1690: /* Initialize CSR3. */
! 1691: pcn_csr_write(sc, LE_CSR3, LE_C3_MISSM|LE_C3_IDONM|LE_C3_DXSUFLO);
! 1692:
! 1693: /* Initialize CSR4. */
! 1694: pcn_csr_write(sc, LE_CSR4, LE_C4_DMAPLUS|LE_C4_APAD_XMT|
! 1695: LE_C4_MFCOM|LE_C4_RCVCCOM|LE_C4_TXSTRTM);
! 1696:
! 1697: /* Initialize CSR5. */
! 1698: sc->sc_csr5 = LE_C5_LTINTEN|LE_C5_SINTE;
! 1699: pcn_csr_write(sc, LE_CSR5, sc->sc_csr5);
! 1700:
! 1701: /*
! 1702: * If we have an Am79c971 or greater, initialize CSR7.
! 1703: *
! 1704: * XXX Might be nice to use the MII auto-poll interrupt someday.
! 1705: */
! 1706: switch (sc->sc_variant->pcv_chipid) {
! 1707: case PARTID_Am79c970:
! 1708: case PARTID_Am79c970A:
! 1709: /* Not available on these chips. */
! 1710: break;
! 1711:
! 1712: default:
! 1713: pcn_csr_write(sc, LE_CSR7, LE_C7_FASTSPNDE);
! 1714: break;
! 1715: }
! 1716:
! 1717: /*
! 1718: * On the Am79c970A and greater, initialize BCR18 to
! 1719: * enable burst mode.
! 1720: *
! 1721: * Also enable the "no underflow" option on the Am79c971 and
! 1722: * higher, which prevents the chip from generating transmit
! 1723: * underflows, yet sill provides decent performance. Note if
! 1724: * chip is not connected to external SRAM, then we still have
! 1725: * to handle underflow errors (the NOUFLO bit is ignored in
! 1726: * that case).
! 1727: */
! 1728: reg = pcn_bcr_read(sc, LE_BCR18);
! 1729: switch (sc->sc_variant->pcv_chipid) {
! 1730: case PARTID_Am79c970:
! 1731: break;
! 1732:
! 1733: case PARTID_Am79c970A:
! 1734: reg |= LE_B18_BREADE|LE_B18_BWRITE;
! 1735: break;
! 1736:
! 1737: default:
! 1738: reg |= LE_B18_BREADE|LE_B18_BWRITE|LE_B18_NOUFLO;
! 1739: break;
! 1740: }
! 1741: pcn_bcr_write(sc, LE_BCR18, reg);
! 1742:
! 1743: /*
! 1744: * Initialize CSR80 (FIFO thresholds for Tx and Rx).
! 1745: */
! 1746: pcn_csr_write(sc, LE_CSR80, LE_C80_RCVFW(sc->sc_rcvfw) |
! 1747: LE_C80_XMTSP(sc->sc_xmtsp) | LE_C80_XMTFW(sc->sc_xmtfw));
! 1748:
! 1749: /*
! 1750: * Send the init block to the chip, and wait for it
! 1751: * to be processed.
! 1752: */
! 1753: PCN_CDINITSYNC(sc, BUS_DMASYNC_PREWRITE);
! 1754: pcn_csr_write(sc, LE_CSR1, PCN_CDINITADDR(sc) & 0xffff);
! 1755: pcn_csr_write(sc, LE_CSR2, (PCN_CDINITADDR(sc) >> 16) & 0xffff);
! 1756: pcn_csr_write(sc, LE_CSR0, LE_C0_INIT);
! 1757: delay(100);
! 1758: for (i = 0; i < 10000; i++) {
! 1759: if (pcn_csr_read(sc, LE_CSR0) & LE_C0_IDON)
! 1760: break;
! 1761: delay(10);
! 1762: }
! 1763: PCN_CDINITSYNC(sc, BUS_DMASYNC_POSTWRITE);
! 1764: if (i == 10000) {
! 1765: printf("%s: timeout processing init block\n",
! 1766: sc->sc_dev.dv_xname);
! 1767: error = EIO;
! 1768: goto out;
! 1769: }
! 1770:
! 1771: /* Set the media. */
! 1772: (void) (*sc->sc_mii.mii_media.ifm_change)(ifp);
! 1773:
! 1774: /* Enable interrupts and external activity (and ACK IDON). */
! 1775: pcn_csr_write(sc, LE_CSR0, LE_C0_INEA|LE_C0_STRT|LE_C0_IDON);
! 1776:
! 1777: if (sc->sc_flags & PCN_F_HAS_MII) {
! 1778: /* Start the one second MII clock. */
! 1779: timeout_add(&sc->sc_tick_timeout, hz);
! 1780: }
! 1781:
! 1782: /* ...all done! */
! 1783: ifp->if_flags |= IFF_RUNNING;
! 1784: ifp->if_flags &= ~IFF_OACTIVE;
! 1785:
! 1786: out:
! 1787: if (error)
! 1788: printf("%s: interface not running\n", sc->sc_dev.dv_xname);
! 1789: return (error);
! 1790: }
! 1791:
! 1792: /*
! 1793: * pcn_rxdrain:
! 1794: *
! 1795: * Drain the receive queue.
! 1796: */
! 1797: void
! 1798: pcn_rxdrain(struct pcn_softc *sc)
! 1799: {
! 1800: struct pcn_rxsoft *rxs;
! 1801: int i;
! 1802:
! 1803: for (i = 0; i < PCN_NRXDESC; i++) {
! 1804: rxs = &sc->sc_rxsoft[i];
! 1805: if (rxs->rxs_mbuf != NULL) {
! 1806: bus_dmamap_unload(sc->sc_dmat, rxs->rxs_dmamap);
! 1807: m_freem(rxs->rxs_mbuf);
! 1808: rxs->rxs_mbuf = NULL;
! 1809: }
! 1810: }
! 1811: }
! 1812:
! 1813: /*
! 1814: * pcn_stop: [ifnet interface function]
! 1815: *
! 1816: * Stop transmission on the interface.
! 1817: */
! 1818: void
! 1819: pcn_stop(struct ifnet *ifp, int disable)
! 1820: {
! 1821: struct pcn_softc *sc = ifp->if_softc;
! 1822: struct pcn_txsoft *txs;
! 1823: int i;
! 1824:
! 1825: if (sc->sc_flags & PCN_F_HAS_MII) {
! 1826: /* Stop the one second clock. */
! 1827: timeout_del(&sc->sc_tick_timeout);
! 1828:
! 1829: /* Down the MII. */
! 1830: mii_down(&sc->sc_mii);
! 1831: }
! 1832:
! 1833: /* Mark the interface as down and cancel the watchdog timer. */
! 1834: ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE);
! 1835: ifp->if_timer = 0;
! 1836:
! 1837: /* Stop the chip. */
! 1838: pcn_csr_write(sc, LE_CSR0, LE_C0_STOP);
! 1839:
! 1840: /* Release any queued transmit buffers. */
! 1841: for (i = 0; i < PCN_TXQUEUELEN; i++) {
! 1842: txs = &sc->sc_txsoft[i];
! 1843: if (txs->txs_mbuf != NULL) {
! 1844: bus_dmamap_unload(sc->sc_dmat, txs->txs_dmamap);
! 1845: m_freem(txs->txs_mbuf);
! 1846: txs->txs_mbuf = NULL;
! 1847: }
! 1848: }
! 1849:
! 1850: if (disable)
! 1851: pcn_rxdrain(sc);
! 1852: }
! 1853:
! 1854: /*
! 1855: * pcn_add_rxbuf:
! 1856: *
! 1857: * Add a receive buffer to the indicated descriptor.
! 1858: */
! 1859: int
! 1860: pcn_add_rxbuf(struct pcn_softc *sc, int idx)
! 1861: {
! 1862: struct pcn_rxsoft *rxs = &sc->sc_rxsoft[idx];
! 1863: struct mbuf *m;
! 1864: int error;
! 1865:
! 1866: MGETHDR(m, M_DONTWAIT, MT_DATA);
! 1867: if (m == NULL)
! 1868: return (ENOBUFS);
! 1869:
! 1870: MCLGET(m, M_DONTWAIT);
! 1871: if ((m->m_flags & M_EXT) == 0) {
! 1872: m_freem(m);
! 1873: return (ENOBUFS);
! 1874: }
! 1875:
! 1876: if (rxs->rxs_mbuf != NULL)
! 1877: bus_dmamap_unload(sc->sc_dmat, rxs->rxs_dmamap);
! 1878:
! 1879: rxs->rxs_mbuf = m;
! 1880:
! 1881: error = bus_dmamap_load(sc->sc_dmat, rxs->rxs_dmamap,
! 1882: m->m_ext.ext_buf, m->m_ext.ext_size, NULL,
! 1883: BUS_DMA_READ|BUS_DMA_NOWAIT);
! 1884: if (error) {
! 1885: printf("%s: can't load rx DMA map %d, error = %d\n",
! 1886: sc->sc_dev.dv_xname, idx, error);
! 1887: panic("pcn_add_rxbuf");
! 1888: }
! 1889:
! 1890: bus_dmamap_sync(sc->sc_dmat, rxs->rxs_dmamap, 0,
! 1891: rxs->rxs_dmamap->dm_mapsize, BUS_DMASYNC_PREREAD);
! 1892:
! 1893: PCN_INIT_RXDESC(sc, idx);
! 1894:
! 1895: return (0);
! 1896: }
! 1897:
! 1898: /*
! 1899: * pcn_set_filter:
! 1900: *
! 1901: * Set up the receive filter.
! 1902: */
! 1903: void
! 1904: pcn_set_filter(struct pcn_softc *sc)
! 1905: {
! 1906: struct arpcom *ac = &sc->sc_arpcom;
! 1907: struct ifnet *ifp = &sc->sc_arpcom.ac_if;
! 1908: struct ether_multi *enm;
! 1909: struct ether_multistep step;
! 1910: uint32_t crc;
! 1911:
! 1912: /*
! 1913: * Set up the multicast address filter by passing all multicast
! 1914: * addresses through a CRC generator, and then using the high
! 1915: * order 6 bits as an index into the 64-bit logical address
! 1916: * filter. The high order bits select the word, while the rest
! 1917: * of the bits select the bit within the word.
! 1918: */
! 1919:
! 1920: if (ifp->if_flags & IFF_ALLMULTI || ifp->if_flags & IFF_PROMISC)
! 1921: goto allmulti;
! 1922:
! 1923: sc->sc_initblock.init_ladrf[0] =
! 1924: sc->sc_initblock.init_ladrf[1] =
! 1925: sc->sc_initblock.init_ladrf[2] =
! 1926: sc->sc_initblock.init_ladrf[3] = 0;
! 1927:
! 1928: ETHER_FIRST_MULTI(step, ac, enm);
! 1929: while (enm != NULL) {
! 1930: if (memcmp(enm->enm_addrlo, enm->enm_addrhi, ETHER_ADDR_LEN)) {
! 1931: /*
! 1932: * We must listen to a range of multicast addresses.
! 1933: * For now, just accept all multicasts, rather than
! 1934: * trying to set only those filter bits needed to match
! 1935: * the range. (At this time, the only use of address
! 1936: * ranges is for IP multicast routing, for which the
! 1937: * range is big enough to require all bits set.)
! 1938: */
! 1939: goto allmulti;
! 1940: }
! 1941:
! 1942: crc = ether_crc32_le(enm->enm_addrlo, ETHER_ADDR_LEN);
! 1943:
! 1944: /* Just want the 6 most significant bits. */
! 1945: crc >>= 26;
! 1946:
! 1947: /* Set the corresponding bit in the filter. */
! 1948: sc->sc_initblock.init_ladrf[crc >> 4] |=
! 1949: htole16(1 << (crc & 0xf));
! 1950:
! 1951: ETHER_NEXT_MULTI(step, enm);
! 1952: }
! 1953:
! 1954: ifp->if_flags &= ~IFF_ALLMULTI;
! 1955: return;
! 1956:
! 1957: allmulti:
! 1958: ifp->if_flags |= IFF_ALLMULTI;
! 1959: sc->sc_initblock.init_ladrf[0] =
! 1960: sc->sc_initblock.init_ladrf[1] =
! 1961: sc->sc_initblock.init_ladrf[2] =
! 1962: sc->sc_initblock.init_ladrf[3] = 0xffff;
! 1963: }
! 1964:
! 1965: /*
! 1966: * pcn_79c970_mediainit:
! 1967: *
! 1968: * Initialize media for the Am79c970.
! 1969: */
! 1970: void
! 1971: pcn_79c970_mediainit(struct pcn_softc *sc)
! 1972: {
! 1973: ifmedia_init(&sc->sc_mii.mii_media, IFM_IMASK, pcn_79c970_mediachange,
! 1974: pcn_79c970_mediastatus);
! 1975:
! 1976: ifmedia_add(&sc->sc_mii.mii_media, IFM_ETHER|IFM_10_5,
! 1977: PORTSEL_AUI, NULL);
! 1978: if (sc->sc_variant->pcv_chipid == PARTID_Am79c970A)
! 1979: ifmedia_add(&sc->sc_mii.mii_media, IFM_ETHER|IFM_10_5|IFM_FDX,
! 1980: PORTSEL_AUI, NULL);
! 1981:
! 1982: ifmedia_add(&sc->sc_mii.mii_media, IFM_ETHER|IFM_10_T,
! 1983: PORTSEL_10T, NULL);
! 1984: if (sc->sc_variant->pcv_chipid == PARTID_Am79c970A)
! 1985: ifmedia_add(&sc->sc_mii.mii_media, IFM_ETHER|IFM_10_T|IFM_FDX,
! 1986: PORTSEL_10T, NULL);
! 1987:
! 1988: ifmedia_add(&sc->sc_mii.mii_media, IFM_ETHER|IFM_AUTO,
! 1989: 0, NULL);
! 1990: if (sc->sc_variant->pcv_chipid == PARTID_Am79c970A)
! 1991: ifmedia_add(&sc->sc_mii.mii_media, IFM_ETHER|IFM_AUTO|IFM_FDX,
! 1992: 0, NULL);
! 1993:
! 1994: ifmedia_set(&sc->sc_mii.mii_media, IFM_ETHER|IFM_AUTO);
! 1995: }
! 1996:
! 1997: /*
! 1998: * pcn_79c970_mediastatus: [ifmedia interface function]
! 1999: *
! 2000: * Get the current interface media status (Am79c970 version).
! 2001: */
! 2002: void
! 2003: pcn_79c970_mediastatus(struct ifnet *ifp, struct ifmediareq *ifmr)
! 2004: {
! 2005: struct pcn_softc *sc = ifp->if_softc;
! 2006:
! 2007: /*
! 2008: * The currently selected media is always the active media.
! 2009: * Note: We have no way to determine what media the AUTO
! 2010: * process picked.
! 2011: */
! 2012: ifmr->ifm_active = sc->sc_mii.mii_media.ifm_media;
! 2013: }
! 2014:
! 2015: /*
! 2016: * pcn_79c970_mediachange: [ifmedia interface function]
! 2017: *
! 2018: * Set hardware to newly-selected media (Am79c970 version).
! 2019: */
! 2020: int
! 2021: pcn_79c970_mediachange(struct ifnet *ifp)
! 2022: {
! 2023: struct pcn_softc *sc = ifp->if_softc;
! 2024: uint32_t reg;
! 2025:
! 2026: if (IFM_SUBTYPE(sc->sc_mii.mii_media.ifm_media) == IFM_AUTO) {
! 2027: /*
! 2028: * CSR15:PORTSEL doesn't matter. Just set BCR2:ASEL.
! 2029: */
! 2030: reg = pcn_bcr_read(sc, LE_BCR2);
! 2031: reg |= LE_B2_ASEL;
! 2032: pcn_bcr_write(sc, LE_BCR2, reg);
! 2033: } else {
! 2034: /*
! 2035: * Clear BCR2:ASEL and set the new CSR15:PORTSEL value.
! 2036: */
! 2037: reg = pcn_bcr_read(sc, LE_BCR2);
! 2038: reg &= ~LE_B2_ASEL;
! 2039: pcn_bcr_write(sc, LE_BCR2, reg);
! 2040:
! 2041: reg = pcn_csr_read(sc, LE_CSR15);
! 2042: reg = (reg & ~LE_C15_PORTSEL(PORTSEL_MASK)) |
! 2043: LE_C15_PORTSEL(sc->sc_mii.mii_media.ifm_cur->ifm_data);
! 2044: pcn_csr_write(sc, LE_CSR15, reg);
! 2045: }
! 2046:
! 2047: if ((sc->sc_mii.mii_media.ifm_media & IFM_FDX) != 0) {
! 2048: reg = LE_B9_FDEN;
! 2049: if (IFM_SUBTYPE(sc->sc_mii.mii_media.ifm_media) == IFM_10_5)
! 2050: reg |= LE_B9_AUIFD;
! 2051: pcn_bcr_write(sc, LE_BCR9, reg);
! 2052: } else
! 2053: pcn_bcr_write(sc, LE_BCR9, 0);
! 2054:
! 2055: return (0);
! 2056: }
! 2057:
! 2058: /*
! 2059: * pcn_79c971_mediainit:
! 2060: *
! 2061: * Initialize media for the Am79c971.
! 2062: */
! 2063: void
! 2064: pcn_79c971_mediainit(struct pcn_softc *sc)
! 2065: {
! 2066: struct ifnet *ifp = &sc->sc_arpcom.ac_if;
! 2067:
! 2068: /* We have MII. */
! 2069: sc->sc_flags |= PCN_F_HAS_MII;
! 2070:
! 2071: /*
! 2072: * The built-in 10BASE-T interface is mapped to the MII
! 2073: * on the PCNet-FAST. Unfortunately, there's no EEPROM
! 2074: * word that tells us which PHY to use.
! 2075: * This driver used to ignore all but the first PHY to
! 2076: * answer, but this code was removed to support multiple
! 2077: * external PHYs. As the default instance will be the first
! 2078: * one to answer, no harm is done by letting the possibly
! 2079: * non-connected internal PHY show up.
! 2080: */
! 2081:
! 2082: /* Initialize our media structures and probe the MII. */
! 2083: sc->sc_mii.mii_ifp = ifp;
! 2084: sc->sc_mii.mii_readreg = pcn_mii_readreg;
! 2085: sc->sc_mii.mii_writereg = pcn_mii_writereg;
! 2086: sc->sc_mii.mii_statchg = pcn_mii_statchg;
! 2087: ifmedia_init(&sc->sc_mii.mii_media, 0, pcn_79c971_mediachange,
! 2088: pcn_79c971_mediastatus);
! 2089:
! 2090: mii_attach(&sc->sc_dev, &sc->sc_mii, 0xffffffff, MII_PHY_ANY,
! 2091: MII_OFFSET_ANY, 0);
! 2092: if (LIST_FIRST(&sc->sc_mii.mii_phys) == NULL) {
! 2093: ifmedia_add(&sc->sc_mii.mii_media, IFM_ETHER|IFM_NONE, 0, NULL);
! 2094: ifmedia_set(&sc->sc_mii.mii_media, IFM_ETHER|IFM_NONE);
! 2095: } else
! 2096: ifmedia_set(&sc->sc_mii.mii_media, IFM_ETHER|IFM_AUTO);
! 2097: }
! 2098:
! 2099: /*
! 2100: * pcn_79c971_mediastatus: [ifmedia interface function]
! 2101: *
! 2102: * Get the current interface media status (Am79c971 version).
! 2103: */
! 2104: void
! 2105: pcn_79c971_mediastatus(struct ifnet *ifp, struct ifmediareq *ifmr)
! 2106: {
! 2107: struct pcn_softc *sc = ifp->if_softc;
! 2108:
! 2109: mii_pollstat(&sc->sc_mii);
! 2110: ifmr->ifm_status = sc->sc_mii.mii_media_status;
! 2111: ifmr->ifm_active = sc->sc_mii.mii_media_active;
! 2112: }
! 2113:
! 2114: /*
! 2115: * pcn_79c971_mediachange: [ifmedia interface function]
! 2116: *
! 2117: * Set hardware to newly-selected media (Am79c971 version).
! 2118: */
! 2119: int
! 2120: pcn_79c971_mediachange(struct ifnet *ifp)
! 2121: {
! 2122: struct pcn_softc *sc = ifp->if_softc;
! 2123:
! 2124: if (ifp->if_flags & IFF_UP)
! 2125: mii_mediachg(&sc->sc_mii);
! 2126: return (0);
! 2127: }
! 2128:
! 2129: /*
! 2130: * pcn_mii_readreg: [mii interface function]
! 2131: *
! 2132: * Read a PHY register on the MII.
! 2133: */
! 2134: int
! 2135: pcn_mii_readreg(struct device *self, int phy, int reg)
! 2136: {
! 2137: struct pcn_softc *sc = (void *) self;
! 2138: uint32_t rv;
! 2139:
! 2140: pcn_bcr_write(sc, LE_BCR33, reg | (phy << PHYAD_SHIFT));
! 2141: rv = pcn_bcr_read(sc, LE_BCR34) & LE_B34_MIIMD;
! 2142: if (rv == 0xffff)
! 2143: return (0);
! 2144:
! 2145: return (rv);
! 2146: }
! 2147:
! 2148: /*
! 2149: * pcn_mii_writereg: [mii interface function]
! 2150: *
! 2151: * Write a PHY register on the MII.
! 2152: */
! 2153: void
! 2154: pcn_mii_writereg(struct device *self, int phy, int reg, int val)
! 2155: {
! 2156: struct pcn_softc *sc = (void *) self;
! 2157:
! 2158: pcn_bcr_write(sc, LE_BCR33, reg | (phy << PHYAD_SHIFT));
! 2159: pcn_bcr_write(sc, LE_BCR34, val);
! 2160: }
! 2161:
! 2162: /*
! 2163: * pcn_mii_statchg: [mii interface function]
! 2164: *
! 2165: * Callback from MII layer when media changes.
! 2166: */
! 2167: void
! 2168: pcn_mii_statchg(struct device *self)
! 2169: {
! 2170: struct pcn_softc *sc = (void *) self;
! 2171:
! 2172: if ((sc->sc_mii.mii_media_active & IFM_FDX) != 0)
! 2173: pcn_bcr_write(sc, LE_BCR9, LE_B9_FDEN);
! 2174: else
! 2175: pcn_bcr_write(sc, LE_BCR9, 0);
! 2176: }
CVSweb