Annotation of sys/dev/pci/if_vge.c, Revision 1.1.1.1
1.1 nbrk 1: /* $OpenBSD: if_vge.c,v 1.33 2007/05/01 11:28:06 canacar Exp $ */
2: /* $FreeBSD: if_vge.c,v 1.3 2004/09/11 22:13:25 wpaul Exp $ */
3: /*
4: * Copyright (c) 2004
5: * Bill Paul <wpaul@windriver.com>. All rights reserved.
6: *
7: * Redistribution and use in source and binary forms, with or without
8: * modification, are permitted provided that the following conditions
9: * are met:
10: * 1. Redistributions of source code must retain the above copyright
11: * notice, this list of conditions and the following disclaimer.
12: * 2. Redistributions in binary form must reproduce the above copyright
13: * notice, this list of conditions and the following disclaimer in the
14: * documentation and/or other materials provided with the distribution.
15: * 3. All advertising materials mentioning features or use of this software
16: * must display the following acknowledgement:
17: * This product includes software developed by Bill Paul.
18: * 4. Neither the name of the author nor the names of any co-contributors
19: * may be used to endorse or promote products derived from this software
20: * without specific prior written permission.
21: *
22: * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
23: * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
24: * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
25: * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
26: * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
27: * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
28: * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
29: * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
30: * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
31: * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
32: * THE POSSIBILITY OF SUCH DAMAGE.
33: */
34:
35: /*
36: * VIA Networking Technologies VT612x PCI gigabit ethernet NIC driver.
37: *
38: * Written by Bill Paul <wpaul@windriver.com>
39: * Senior Networking Software Engineer
40: * Wind River Systems
41: *
42: * Ported to OpenBSD by Peter Valchev <pvalchev@openbsd.org>
43: */
44:
45: /*
46: * The VIA Networking VT6122 is a 32bit, 33/66MHz PCI device that
47: * combines a tri-speed ethernet MAC and PHY, with the following
48: * features:
49: *
50: * o Jumbo frame support up to 16K
51: * o Transmit and receive flow control
52: * o IPv4 checksum offload
53: * o VLAN tag insertion and stripping
54: * o TCP large send
55: * o 64-bit multicast hash table filter
56: * o 64 entry CAM filter
57: * o 16K RX FIFO and 48K TX FIFO memory
58: * o Interrupt moderation
59: *
60: * The VT6122 supports up to four transmit DMA queues. The descriptors
61: * in the transmit ring can address up to 7 data fragments; frames which
62: * span more than 7 data buffers must be coalesced, but in general the
63: * BSD TCP/IP stack rarely generates frames more than 2 or 3 fragments
64: * long. The receive descriptors address only a single buffer.
65: *
66: * There are two peculiar design issues with the VT6122. One is that
67: * receive data buffers must be aligned on a 32-bit boundary. This is
68: * not a problem where the VT6122 is used as a LOM device in x86-based
69: * systems, but on architectures that generate unaligned access traps, we
70: * have to do some copying.
71: *
72: * The other issue has to do with the way 64-bit addresses are handled.
73: * The DMA descriptors only allow you to specify 48 bits of addressing
74: * information. The remaining 16 bits are specified using one of the
75: * I/O registers. If you only have a 32-bit system, then this isn't
76: * an issue, but if you have a 64-bit system and more than 4GB of
77: * memory, you must have to make sure your network data buffers reside
78: * in the same 48-bit 'segment.'
79: *
80: * Special thanks to Ryan Fu at VIA Networking for providing documentation
81: * and sample NICs for testing.
82: */
83:
84: #include "bpfilter.h"
85: #include "vlan.h"
86:
87: #include <sys/param.h>
88: #include <sys/endian.h>
89: #include <sys/systm.h>
90: #include <sys/sockio.h>
91: #include <sys/mbuf.h>
92: #include <sys/malloc.h>
93: #include <sys/kernel.h>
94: #include <sys/device.h>
95: #include <sys/timeout.h>
96: #include <sys/socket.h>
97:
98: #include <net/if.h>
99: #include <net/if_dl.h>
100: #include <net/if_media.h>
101:
102: #ifdef INET
103: #include <netinet/in.h>
104: #include <netinet/in_systm.h>
105: #include <netinet/in_var.h>
106: #include <netinet/ip.h>
107: #include <netinet/if_ether.h>
108: #endif
109:
110: #if NVLAN > 0
111: #include <net/if_types.h>
112: #include <net/if_vlan_var.h>
113: #endif
114:
115: #if NBPFILTER > 0
116: #include <net/bpf.h>
117: #endif
118:
119: #include <dev/mii/mii.h>
120: #include <dev/mii/miivar.h>
121:
122: #include <dev/pci/pcireg.h>
123: #include <dev/pci/pcivar.h>
124: #include <dev/pci/pcidevs.h>
125:
126: #include <dev/pci/if_vgereg.h>
127: #include <dev/pci/if_vgevar.h>
128:
129: int vge_probe (struct device *, void *, void *);
130: void vge_attach (struct device *, struct device *, void *);
131:
132: int vge_encap (struct vge_softc *, struct mbuf *, int);
133:
134: int vge_allocmem (struct vge_softc *);
135: int vge_newbuf (struct vge_softc *, int, struct mbuf *);
136: int vge_rx_list_init (struct vge_softc *);
137: int vge_tx_list_init (struct vge_softc *);
138: void vge_rxeof (struct vge_softc *);
139: void vge_txeof (struct vge_softc *);
140: int vge_intr (void *);
141: void vge_tick (void *);
142: void vge_start (struct ifnet *);
143: int vge_ioctl (struct ifnet *, u_long, caddr_t);
144: int vge_init (struct ifnet *);
145: void vge_stop (struct vge_softc *);
146: void vge_watchdog (struct ifnet *);
147: int vge_ifmedia_upd (struct ifnet *);
148: void vge_ifmedia_sts (struct ifnet *, struct ifmediareq *);
149:
150: #ifdef VGE_EEPROM
151: void vge_eeprom_getword (struct vge_softc *, int, u_int16_t *);
152: #endif
153: void vge_read_eeprom (struct vge_softc *, caddr_t, int, int, int);
154:
155: void vge_miipoll_start (struct vge_softc *);
156: void vge_miipoll_stop (struct vge_softc *);
157: int vge_miibus_readreg (struct device *, int, int);
158: void vge_miibus_writereg (struct device *, int, int, int);
159: void vge_miibus_statchg (struct device *);
160:
161: void vge_cam_clear (struct vge_softc *);
162: int vge_cam_set (struct vge_softc *, uint8_t *);
163: void vge_setmulti (struct vge_softc *);
164: void vge_reset (struct vge_softc *);
165:
166: struct cfattach vge_ca = {
167: sizeof(struct vge_softc), vge_probe, vge_attach
168: };
169:
170: struct cfdriver vge_cd = {
171: 0, "vge", DV_IFNET
172: };
173:
174: #define VGE_PCI_LOIO 0x10
175: #define VGE_PCI_LOMEM 0x14
176:
177: int vge_debug = 0;
178: #define DPRINTF(x) if (vge_debug) printf x
179: #define DPRINTFN(n, x) if (vge_debug >= (n)) printf x
180:
181: const struct pci_matchid vge_devices[] = {
182: { PCI_VENDOR_VIATECH, PCI_PRODUCT_VIATECH_VT612x },
183: };
184:
185: #ifdef VGE_EEPROM
186: /*
187: * Read a word of data stored in the EEPROM at address 'addr.'
188: */
189: void
190: vge_eeprom_getword(struct vge_softc *sc, int addr, u_int16_t *dest)
191: {
192: int i;
193: u_int16_t word = 0;
194:
195: /*
196: * Enter EEPROM embedded programming mode. In order to
197: * access the EEPROM at all, we first have to set the
198: * EELOAD bit in the CHIPCFG2 register.
199: */
200: CSR_SETBIT_1(sc, VGE_CHIPCFG2, VGE_CHIPCFG2_EELOAD);
201: CSR_SETBIT_1(sc, VGE_EECSR, VGE_EECSR_EMBP/*|VGE_EECSR_ECS*/);
202:
203: /* Select the address of the word we want to read */
204: CSR_WRITE_1(sc, VGE_EEADDR, addr);
205:
206: /* Issue read command */
207: CSR_SETBIT_1(sc, VGE_EECMD, VGE_EECMD_ERD);
208:
209: /* Wait for the done bit to be set. */
210: for (i = 0; i < VGE_TIMEOUT; i++) {
211: if (CSR_READ_1(sc, VGE_EECMD) & VGE_EECMD_EDONE)
212: break;
213: }
214:
215: if (i == VGE_TIMEOUT) {
216: printf("%s: EEPROM read timed out\n", sc->vge_dev.dv_xname);
217: *dest = 0;
218: return;
219: }
220:
221: /* Read the result */
222: word = CSR_READ_2(sc, VGE_EERDDAT);
223:
224: /* Turn off EEPROM access mode. */
225: CSR_CLRBIT_1(sc, VGE_EECSR, VGE_EECSR_EMBP/*|VGE_EECSR_ECS*/);
226: CSR_CLRBIT_1(sc, VGE_CHIPCFG2, VGE_CHIPCFG2_EELOAD);
227:
228: *dest = word;
229: }
230: #endif
231:
232: /*
233: * Read a sequence of words from the EEPROM.
234: */
235: void
236: vge_read_eeprom(struct vge_softc *sc, caddr_t dest, int off, int cnt,
237: int swap)
238: {
239: int i;
240: #ifdef VGE_EEPROM
241: u_int16_t word = 0, *ptr;
242:
243: for (i = 0; i < cnt; i++) {
244: vge_eeprom_getword(sc, off + i, &word);
245: ptr = (u_int16_t *)(dest + (i * 2));
246: if (swap)
247: *ptr = ntohs(word);
248: else
249: *ptr = word;
250: }
251: #else
252: for (i = 0; i < ETHER_ADDR_LEN; i++)
253: dest[i] = CSR_READ_1(sc, VGE_PAR0 + i);
254: #endif
255: }
256:
257: void
258: vge_miipoll_stop(struct vge_softc *sc)
259: {
260: int i;
261:
262: CSR_WRITE_1(sc, VGE_MIICMD, 0);
263:
264: for (i = 0; i < VGE_TIMEOUT; i++) {
265: DELAY(1);
266: if (CSR_READ_1(sc, VGE_MIISTS) & VGE_MIISTS_IIDL)
267: break;
268: }
269:
270: if (i == VGE_TIMEOUT)
271: printf("%s: failed to idle MII autopoll\n", sc->vge_dev.dv_xname);
272: }
273:
274: void
275: vge_miipoll_start(struct vge_softc *sc)
276: {
277: int i;
278:
279: /* First, make sure we're idle. */
280:
281: CSR_WRITE_1(sc, VGE_MIICMD, 0);
282: CSR_WRITE_1(sc, VGE_MIIADDR, VGE_MIIADDR_SWMPL);
283:
284: for (i = 0; i < VGE_TIMEOUT; i++) {
285: DELAY(1);
286: if (CSR_READ_1(sc, VGE_MIISTS) & VGE_MIISTS_IIDL)
287: break;
288: }
289:
290: if (i == VGE_TIMEOUT) {
291: printf("%s: failed to idle MII autopoll\n", sc->vge_dev.dv_xname);
292: return;
293: }
294:
295: /* Now enable auto poll mode. */
296:
297: CSR_WRITE_1(sc, VGE_MIICMD, VGE_MIICMD_MAUTO);
298:
299: /* And make sure it started. */
300:
301: for (i = 0; i < VGE_TIMEOUT; i++) {
302: DELAY(1);
303: if ((CSR_READ_1(sc, VGE_MIISTS) & VGE_MIISTS_IIDL) == 0)
304: break;
305: }
306:
307: if (i == VGE_TIMEOUT)
308: printf("%s: failed to start MII autopoll\n", sc->vge_dev.dv_xname);
309: }
310:
311: int
312: vge_miibus_readreg(struct device *dev, int phy, int reg)
313: {
314: struct vge_softc *sc = (struct vge_softc *)dev;
315: int i, s;
316: u_int16_t rval = 0;
317:
318: if (phy != (CSR_READ_1(sc, VGE_MIICFG) & 0x1F))
319: return(0);
320:
321: s = splnet();
322:
323: vge_miipoll_stop(sc);
324:
325: /* Specify the register we want to read. */
326: CSR_WRITE_1(sc, VGE_MIIADDR, reg);
327:
328: /* Issue read command. */
329: CSR_SETBIT_1(sc, VGE_MIICMD, VGE_MIICMD_RCMD);
330:
331: /* Wait for the read command bit to self-clear. */
332: for (i = 0; i < VGE_TIMEOUT; i++) {
333: DELAY(1);
334: if ((CSR_READ_1(sc, VGE_MIICMD) & VGE_MIICMD_RCMD) == 0)
335: break;
336: }
337:
338: if (i == VGE_TIMEOUT)
339: printf("%s: MII read timed out\n", sc->vge_dev.dv_xname);
340: else
341: rval = CSR_READ_2(sc, VGE_MIIDATA);
342:
343: vge_miipoll_start(sc);
344: splx(s);
345:
346: return (rval);
347: }
348:
349: void
350: vge_miibus_writereg(struct device *dev, int phy, int reg, int data)
351: {
352: struct vge_softc *sc = (struct vge_softc *)dev;
353: int i, s;
354:
355: if (phy != (CSR_READ_1(sc, VGE_MIICFG) & 0x1F))
356: return;
357:
358: s = splnet();
359: vge_miipoll_stop(sc);
360:
361: /* Specify the register we want to write. */
362: CSR_WRITE_1(sc, VGE_MIIADDR, reg);
363:
364: /* Specify the data we want to write. */
365: CSR_WRITE_2(sc, VGE_MIIDATA, data);
366:
367: /* Issue write command. */
368: CSR_SETBIT_1(sc, VGE_MIICMD, VGE_MIICMD_WCMD);
369:
370: /* Wait for the write command bit to self-clear. */
371: for (i = 0; i < VGE_TIMEOUT; i++) {
372: DELAY(1);
373: if ((CSR_READ_1(sc, VGE_MIICMD) & VGE_MIICMD_WCMD) == 0)
374: break;
375: }
376:
377: if (i == VGE_TIMEOUT) {
378: printf("%s: MII write timed out\n", sc->vge_dev.dv_xname);
379: }
380:
381: vge_miipoll_start(sc);
382: splx(s);
383: }
384:
385: void
386: vge_cam_clear(struct vge_softc *sc)
387: {
388: int i;
389:
390: /*
391: * Turn off all the mask bits. This tells the chip
392: * that none of the entries in the CAM filter are valid.
393: * desired entries will be enabled as we fill the filter in.
394: */
395:
396: CSR_CLRBIT_1(sc, VGE_CAMCTL, VGE_CAMCTL_PAGESEL);
397: CSR_SETBIT_1(sc, VGE_CAMCTL, VGE_PAGESEL_CAMMASK);
398: CSR_WRITE_1(sc, VGE_CAMADDR, VGE_CAMADDR_ENABLE);
399: for (i = 0; i < 8; i++)
400: CSR_WRITE_1(sc, VGE_CAM0 + i, 0);
401:
402: /* Clear the VLAN filter too. */
403:
404: CSR_WRITE_1(sc, VGE_CAMADDR, VGE_CAMADDR_ENABLE|VGE_CAMADDR_AVSEL|0);
405: for (i = 0; i < 8; i++)
406: CSR_WRITE_1(sc, VGE_CAM0 + i, 0);
407:
408: CSR_WRITE_1(sc, VGE_CAMADDR, 0);
409: CSR_CLRBIT_1(sc, VGE_CAMCTL, VGE_CAMCTL_PAGESEL);
410: CSR_SETBIT_1(sc, VGE_CAMCTL, VGE_PAGESEL_MAR);
411:
412: sc->vge_camidx = 0;
413: }
414:
415: int
416: vge_cam_set(struct vge_softc *sc, uint8_t *addr)
417: {
418: int i, error = 0;
419:
420: if (sc->vge_camidx == VGE_CAM_MAXADDRS)
421: return(ENOSPC);
422:
423: /* Select the CAM data page. */
424: CSR_CLRBIT_1(sc, VGE_CAMCTL, VGE_CAMCTL_PAGESEL);
425: CSR_SETBIT_1(sc, VGE_CAMCTL, VGE_PAGESEL_CAMDATA);
426:
427: /* Set the filter entry we want to update and enable writing. */
428: CSR_WRITE_1(sc, VGE_CAMADDR, VGE_CAMADDR_ENABLE|sc->vge_camidx);
429:
430: /* Write the address to the CAM registers */
431: for (i = 0; i < ETHER_ADDR_LEN; i++)
432: CSR_WRITE_1(sc, VGE_CAM0 + i, addr[i]);
433:
434: /* Issue a write command. */
435: CSR_SETBIT_1(sc, VGE_CAMCTL, VGE_CAMCTL_WRITE);
436:
437: /* Wake for it to clear. */
438: for (i = 0; i < VGE_TIMEOUT; i++) {
439: DELAY(1);
440: if ((CSR_READ_1(sc, VGE_CAMCTL) & VGE_CAMCTL_WRITE) == 0)
441: break;
442: }
443:
444: if (i == VGE_TIMEOUT) {
445: printf("%s: setting CAM filter failed\n", sc->vge_dev.dv_xname);
446: error = EIO;
447: goto fail;
448: }
449:
450: /* Select the CAM mask page. */
451: CSR_CLRBIT_1(sc, VGE_CAMCTL, VGE_CAMCTL_PAGESEL);
452: CSR_SETBIT_1(sc, VGE_CAMCTL, VGE_PAGESEL_CAMMASK);
453:
454: /* Set the mask bit that enables this filter. */
455: CSR_SETBIT_1(sc, VGE_CAM0 + (sc->vge_camidx/8),
456: 1<<(sc->vge_camidx & 7));
457:
458: sc->vge_camidx++;
459:
460: fail:
461: /* Turn off access to CAM. */
462: CSR_WRITE_1(sc, VGE_CAMADDR, 0);
463: CSR_CLRBIT_1(sc, VGE_CAMCTL, VGE_CAMCTL_PAGESEL);
464: CSR_SETBIT_1(sc, VGE_CAMCTL, VGE_PAGESEL_MAR);
465:
466: return (error);
467: }
468:
469: /*
470: * Program the multicast filter. We use the 64-entry CAM filter
471: * for perfect filtering. If there's more than 64 multicast addresses,
472: * we use the hash filter instead.
473: */
474: void
475: vge_setmulti(struct vge_softc *sc)
476: {
477: struct arpcom *ac = &sc->arpcom;
478: struct ifnet *ifp = &ac->ac_if;
479: struct ether_multi *enm;
480: struct ether_multistep step;
481: int error;
482: u_int32_t h = 0, hashes[2] = { 0, 0 };
483:
484: /* First, zot all the multicast entries. */
485: vge_cam_clear(sc);
486: CSR_WRITE_4(sc, VGE_MAR0, 0);
487: CSR_WRITE_4(sc, VGE_MAR1, 0);
488: ifp->if_flags &= ~IFF_ALLMULTI;
489:
490: /*
491: * If the user wants allmulti or promisc mode, enable reception
492: * of all multicast frames.
493: */
494: if (ifp->if_flags & IFF_PROMISC) {
495: allmulti:
496: CSR_WRITE_4(sc, VGE_MAR0, 0xFFFFFFFF);
497: CSR_WRITE_4(sc, VGE_MAR1, 0xFFFFFFFF);
498: ifp->if_flags |= IFF_ALLMULTI;
499: return;
500: }
501:
502: /* Now program new ones */
503: ETHER_FIRST_MULTI(step, ac, enm);
504: while (enm != NULL) {
505: if (bcmp(enm->enm_addrlo, enm->enm_addrhi, ETHER_ADDR_LEN))
506: goto allmulti;
507:
508: error = vge_cam_set(sc, enm->enm_addrlo);
509: if (error)
510: break;
511:
512: ETHER_NEXT_MULTI(step, enm);
513: }
514:
515: /* If there were too many addresses, use the hash filter. */
516: if (error) {
517: vge_cam_clear(sc);
518:
519: ETHER_FIRST_MULTI(step, ac, enm);
520: while (enm != NULL) {
521: h = ether_crc32_be(enm->enm_addrlo,
522: ETHER_ADDR_LEN) >> 26;
523: hashes[h >> 5] |= 1 << (h & 0x1f);
524:
525: ETHER_NEXT_MULTI(step, enm);
526: }
527:
528: CSR_WRITE_4(sc, VGE_MAR0, hashes[0]);
529: CSR_WRITE_4(sc, VGE_MAR1, hashes[1]);
530: }
531: }
532:
533: void
534: vge_reset(struct vge_softc *sc)
535: {
536: int i;
537:
538: CSR_WRITE_1(sc, VGE_CRS1, VGE_CR1_SOFTRESET);
539:
540: for (i = 0; i < VGE_TIMEOUT; i++) {
541: DELAY(5);
542: if ((CSR_READ_1(sc, VGE_CRS1) & VGE_CR1_SOFTRESET) == 0)
543: break;
544: }
545:
546: if (i == VGE_TIMEOUT) {
547: printf("%s: soft reset timed out", sc->vge_dev.dv_xname);
548: CSR_WRITE_1(sc, VGE_CRS3, VGE_CR3_STOP_FORCE);
549: DELAY(2000);
550: }
551:
552: DELAY(5000);
553:
554: CSR_SETBIT_1(sc, VGE_EECSR, VGE_EECSR_RELOAD);
555:
556: for (i = 0; i < VGE_TIMEOUT; i++) {
557: DELAY(5);
558: if ((CSR_READ_1(sc, VGE_EECSR) & VGE_EECSR_RELOAD) == 0)
559: break;
560: }
561:
562: if (i == VGE_TIMEOUT) {
563: printf("%s: EEPROM reload timed out\n", sc->vge_dev.dv_xname);
564: return;
565: }
566:
567: CSR_CLRBIT_1(sc, VGE_CHIPCFG0, VGE_CHIPCFG0_PACPI);
568: }
569:
570: /*
571: * Probe for a VIA gigabit chip. Check the PCI vendor and device
572: * IDs against our list and return a device name if we find a match.
573: */
574: int
575: vge_probe(struct device *dev, void *match, void *aux)
576: {
577: return (pci_matchbyid((struct pci_attach_args *)aux, vge_devices,
578: sizeof(vge_devices)/sizeof(vge_devices[0])));
579: }
580:
581: /*
582: * Allocate memory for RX/TX rings
583: */
584: int
585: vge_allocmem(struct vge_softc *sc)
586: {
587: int nseg, rseg;
588: int i, error;
589:
590: nseg = 32;
591:
592: /* Allocate DMA'able memory for the TX ring */
593:
594: error = bus_dmamap_create(sc->sc_dmat, VGE_TX_LIST_SZ, 1,
595: VGE_TX_LIST_SZ, 0, BUS_DMA_ALLOCNOW,
596: &sc->vge_ldata.vge_tx_list_map);
597: if (error)
598: return (ENOMEM);
599: error = bus_dmamem_alloc(sc->sc_dmat, VGE_TX_LIST_SZ,
600: ETHER_ALIGN, 0,
601: &sc->vge_ldata.vge_tx_listseg, 1, &rseg, BUS_DMA_NOWAIT);
602: if (error) {
603: printf("%s: can't alloc TX list\n", sc->vge_dev.dv_xname);
604: return (ENOMEM);
605: }
606:
607: /* Load the map for the TX ring. */
608: error = bus_dmamem_map(sc->sc_dmat, &sc->vge_ldata.vge_tx_listseg,
609: 1, VGE_TX_LIST_SZ,
610: (caddr_t *)&sc->vge_ldata.vge_tx_list, BUS_DMA_NOWAIT);
611: memset(sc->vge_ldata.vge_tx_list, 0, VGE_TX_LIST_SZ);
612: if (error) {
613: printf("%s: can't map TX dma buffers\n",
614: sc->vge_dev.dv_xname);
615: bus_dmamem_free(sc->sc_dmat, &sc->vge_ldata.vge_tx_listseg, rseg);
616: return (ENOMEM);
617: }
618:
619: error = bus_dmamap_load(sc->sc_dmat, sc->vge_ldata.vge_tx_list_map,
620: sc->vge_ldata.vge_tx_list, VGE_TX_LIST_SZ, NULL, BUS_DMA_NOWAIT);
621: if (error) {
622: printf("%s: can't load TX dma map\n", sc->vge_dev.dv_xname);
623: bus_dmamap_destroy(sc->sc_dmat, sc->vge_ldata.vge_tx_list_map);
624: bus_dmamem_unmap(sc->sc_dmat, (caddr_t)sc->vge_ldata.vge_tx_list,
625: VGE_TX_LIST_SZ);
626: bus_dmamem_free(sc->sc_dmat, &sc->vge_ldata.vge_tx_listseg, rseg);
627: return (ENOMEM);
628: }
629:
630: /* Create DMA maps for TX buffers */
631:
632: for (i = 0; i < VGE_TX_DESC_CNT; i++) {
633: error = bus_dmamap_create(sc->sc_dmat, MCLBYTES * nseg, nseg,
634: MCLBYTES, 0, BUS_DMA_ALLOCNOW,
635: &sc->vge_ldata.vge_tx_dmamap[i]);
636: if (error) {
637: printf("%s: can't create DMA map for TX\n",
638: sc->vge_dev.dv_xname);
639: return (ENOMEM);
640: }
641: }
642:
643: /* Allocate DMA'able memory for the RX ring */
644:
645: error = bus_dmamap_create(sc->sc_dmat, VGE_RX_LIST_SZ, 1,
646: VGE_RX_LIST_SZ, 0, BUS_DMA_ALLOCNOW,
647: &sc->vge_ldata.vge_rx_list_map);
648: if (error)
649: return (ENOMEM);
650: error = bus_dmamem_alloc(sc->sc_dmat, VGE_RX_LIST_SZ, VGE_RING_ALIGN,
651: 0, &sc->vge_ldata.vge_rx_listseg, 1, &rseg, BUS_DMA_NOWAIT);
652: if (error) {
653: printf("%s: can't alloc RX list\n", sc->vge_dev.dv_xname);
654: return (ENOMEM);
655: }
656:
657: /* Load the map for the RX ring. */
658:
659: error = bus_dmamem_map(sc->sc_dmat, &sc->vge_ldata.vge_rx_listseg,
660: 1, VGE_RX_LIST_SZ,
661: (caddr_t *)&sc->vge_ldata.vge_rx_list, BUS_DMA_NOWAIT);
662: memset(sc->vge_ldata.vge_rx_list, 0, VGE_RX_LIST_SZ);
663: if (error) {
664: printf("%s: can't map RX dma buffers\n",
665: sc->vge_dev.dv_xname);
666: bus_dmamem_free(sc->sc_dmat, &sc->vge_ldata.vge_rx_listseg, rseg);
667: return (ENOMEM);
668: }
669: error = bus_dmamap_load(sc->sc_dmat, sc->vge_ldata.vge_rx_list_map,
670: sc->vge_ldata.vge_rx_list, VGE_RX_LIST_SZ, NULL, BUS_DMA_NOWAIT);
671: if (error) {
672: printf("%s: can't load RX dma map\n", sc->vge_dev.dv_xname);
673: bus_dmamap_destroy(sc->sc_dmat, sc->vge_ldata.vge_rx_list_map);
674: bus_dmamem_unmap(sc->sc_dmat, (caddr_t)sc->vge_ldata.vge_rx_list,
675: VGE_RX_LIST_SZ);
676: bus_dmamem_free(sc->sc_dmat, &sc->vge_ldata.vge_rx_listseg, rseg);
677: return (ENOMEM);
678: }
679:
680: /* Create DMA maps for RX buffers */
681:
682: for (i = 0; i < VGE_RX_DESC_CNT; i++) {
683: error = bus_dmamap_create(sc->sc_dmat, MCLBYTES * nseg, nseg,
684: MCLBYTES, 0, BUS_DMA_ALLOCNOW,
685: &sc->vge_ldata.vge_rx_dmamap[i]);
686: if (error) {
687: printf("%s: can't create DMA map for RX\n",
688: sc->vge_dev.dv_xname);
689: return (ENOMEM);
690: }
691: }
692:
693: return (0);
694: }
695:
696: /*
697: * Attach the interface. Allocate softc structures, do ifmedia
698: * setup and ethernet/BPF attach.
699: */
700: void
701: vge_attach(struct device *parent, struct device *self, void *aux)
702: {
703: u_char eaddr[ETHER_ADDR_LEN];
704: u_int16_t as[3];
705: struct vge_softc *sc = (struct vge_softc *)self;
706: struct pci_attach_args *pa = aux;
707: pci_chipset_tag_t pc = pa->pa_pc;
708: pci_intr_handle_t ih;
709: const char *intrstr = NULL;
710: struct ifnet *ifp;
711: int error = 0, i;
712: bus_size_t iosize;
713:
714: /*
715: * Map control/status registers.
716: */
717: if (pci_mapreg_map(pa, VGE_PCI_LOMEM, PCI_MAPREG_TYPE_MEM, 0,
718: &sc->vge_btag, &sc->vge_bhandle, NULL, &iosize, 0)) {
719: if (pci_mapreg_map(pa, VGE_PCI_LOIO, PCI_MAPREG_TYPE_IO, 0,
720: &sc->vge_btag, &sc->vge_bhandle, NULL, &iosize, 0)) {
721: printf(": can't map mem or i/o space\n");
722: return;
723: }
724: }
725:
726: /* Allocate interrupt */
727: if (pci_intr_map(pa, &ih)) {
728: printf(": couldn't map interrupt\n");
729: return;
730: }
731: intrstr = pci_intr_string(pc, ih);
732: sc->vge_intrhand = pci_intr_establish(pc, ih, IPL_NET, vge_intr, sc,
733: sc->vge_dev.dv_xname);
734: if (sc->vge_intrhand == NULL) {
735: printf(": couldn't establish interrupt");
736: if (intrstr != NULL)
737: printf(" at %s", intrstr);
738: return;
739: }
740: printf(": %s", intrstr);
741:
742: sc->sc_dmat = pa->pa_dmat;
743:
744: /* Reset the adapter. */
745: vge_reset(sc);
746:
747: /*
748: * Get station address from the EEPROM.
749: */
750: vge_read_eeprom(sc, (caddr_t)as, VGE_EE_EADDR, 3, 0);
751: for (i = 0; i < 3; i++) {
752: eaddr[(i * 2) + 0] = as[i] & 0xff;
753: eaddr[(i * 2) + 1] = as[i] >> 8;
754: }
755:
756: bcopy(eaddr, (char *)&sc->arpcom.ac_enaddr, ETHER_ADDR_LEN);
757:
758: printf(", address %s\n",
759: ether_sprintf(sc->arpcom.ac_enaddr));
760:
761: error = vge_allocmem(sc);
762:
763: if (error)
764: return;
765:
766: ifp = &sc->arpcom.ac_if;
767: ifp->if_softc = sc;
768: ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
769: ifp->if_ioctl = vge_ioctl;
770: ifp->if_start = vge_start;
771: ifp->if_watchdog = vge_watchdog;
772: ifp->if_init = vge_init;
773: ifp->if_baudrate = 1000000000;
774: #ifdef VGE_JUMBO
775: ifp->if_hardmtu = VGE_JUMBO_MTU;
776: #endif
777: IFQ_SET_MAXLEN(&ifp->if_snd, VGE_IFQ_MAXLEN);
778: IFQ_SET_READY(&ifp->if_snd);
779:
780: ifp->if_capabilities = IFCAP_VLAN_MTU | IFCAP_CSUM_IPv4 |
781: IFCAP_CSUM_TCPv4 | IFCAP_CSUM_UDPv4;
782:
783: #ifdef VGE_VLAN
784: ifp->if_capabilities |= IFCAP_VLAN_HWTAGGING;
785: #endif
786:
787: /* Set interface name */
788: strlcpy(ifp->if_xname, sc->vge_dev.dv_xname, IFNAMSIZ);
789:
790: /* Do MII setup */
791: sc->sc_mii.mii_ifp = ifp;
792: sc->sc_mii.mii_readreg = vge_miibus_readreg;
793: sc->sc_mii.mii_writereg = vge_miibus_writereg;
794: sc->sc_mii.mii_statchg = vge_miibus_statchg;
795: ifmedia_init(&sc->sc_mii.mii_media, 0,
796: vge_ifmedia_upd, vge_ifmedia_sts);
797: mii_attach(self, &sc->sc_mii, 0xffffffff, MII_PHY_ANY,
798: MII_OFFSET_ANY, 0);
799: if (LIST_FIRST(&sc->sc_mii.mii_phys) == NULL) {
800: printf("%s: no PHY found!\n", sc->vge_dev.dv_xname);
801: ifmedia_add(&sc->sc_mii.mii_media, IFM_ETHER|IFM_MANUAL,
802: 0, NULL);
803: ifmedia_set(&sc->sc_mii.mii_media, IFM_ETHER|IFM_MANUAL);
804: } else
805: ifmedia_set(&sc->sc_mii.mii_media, IFM_ETHER|IFM_AUTO);
806:
807: timeout_set(&sc->timer_handle, vge_tick, sc);
808:
809: /*
810: * Call MI attach routine.
811: */
812: if_attach(ifp);
813: ether_ifattach(ifp);
814: }
815:
816: int
817: vge_newbuf(struct vge_softc *sc, int idx, struct mbuf *m)
818: {
819: struct mbuf *m_new = NULL;
820: struct vge_rx_desc *r;
821: bus_dmamap_t rxmap = sc->vge_ldata.vge_rx_dmamap[idx];
822: int i;
823:
824: if (m == NULL) {
825: /* Allocate a new mbuf */
826: MGETHDR(m_new, M_DONTWAIT, MT_DATA);
827: if (m_new == NULL)
828: return (ENOBUFS);
829:
830: /* Allocate a cluster */
831: MCLGET(m_new, M_DONTWAIT);
832: if (!(m_new->m_flags & M_EXT)) {
833: m_freem(m_new);
834: return (ENOBUFS);
835: }
836: } else
837: m_new->m_data = m_new->m_ext.ext_buf;
838:
839: m_new->m_len = m_new->m_pkthdr.len = MCLBYTES;
840: /* Fix-up alignment so payload is doubleword-aligned */
841: /* XXX m_adj(m_new, ETHER_ALIGN); */
842:
843: if (bus_dmamap_load_mbuf(sc->sc_dmat, rxmap, m_new, BUS_DMA_NOWAIT))
844: return (ENOBUFS);
845:
846: if (rxmap->dm_nsegs > 1)
847: goto out;
848:
849: /* Map the segments into RX descriptors */
850: r = &sc->vge_ldata.vge_rx_list[idx];
851:
852: if (letoh32(r->vge_sts) & VGE_RDSTS_OWN) {
853: printf("%s: tried to map a busy RX descriptor\n",
854: sc->vge_dev.dv_xname);
855: goto out;
856: }
857: r->vge_buflen = htole16(VGE_BUFLEN(rxmap->dm_segs[0].ds_len) | VGE_RXDESC_I);
858: r->vge_addrlo = htole32(VGE_ADDR_LO(rxmap->dm_segs[0].ds_addr));
859: r->vge_addrhi = htole16(VGE_ADDR_HI(rxmap->dm_segs[0].ds_addr) & 0xFFFF);
860: r->vge_sts = htole32(0);
861: r->vge_ctl = htole32(0);
862:
863: /*
864: * Note: the manual fails to document the fact that for
865: * proper operation, the driver needs to replenish the RX
866: * DMA ring 4 descriptors at a time (rather than one at a
867: * time, like most chips). We can allocate the new buffers
868: * but we should not set the OWN bits until we're ready
869: * to hand back 4 of them in one shot.
870: */
871: #define VGE_RXCHUNK 4
872: sc->vge_rx_consumed++;
873: if (sc->vge_rx_consumed == VGE_RXCHUNK) {
874: for (i = idx; i != idx - sc->vge_rx_consumed; i--)
875: sc->vge_ldata.vge_rx_list[i].vge_sts |=
876: htole32(VGE_RDSTS_OWN);
877: sc->vge_rx_consumed = 0;
878: }
879:
880: sc->vge_ldata.vge_rx_mbuf[idx] = m_new;
881:
882: bus_dmamap_sync(sc->sc_dmat, rxmap, 0,
883: rxmap->dm_mapsize, BUS_DMASYNC_PREREAD);
884:
885: return (0);
886: out:
887: DPRINTF(("vge_newbuf: out of memory\n"));
888: if (m_new != NULL)
889: m_freem(m_new);
890: return (ENOMEM);
891: }
892:
893: int
894: vge_tx_list_init(struct vge_softc *sc)
895: {
896: bzero ((char *)sc->vge_ldata.vge_tx_list, VGE_TX_LIST_SZ);
897: bzero ((char *)&sc->vge_ldata.vge_tx_mbuf,
898: (VGE_TX_DESC_CNT * sizeof(struct mbuf *)));
899:
900: bus_dmamap_sync(sc->sc_dmat,
901: sc->vge_ldata.vge_tx_list_map, 0,
902: sc->vge_ldata.vge_tx_list_map->dm_mapsize,
903: BUS_DMASYNC_PREWRITE);
904: sc->vge_ldata.vge_tx_prodidx = 0;
905: sc->vge_ldata.vge_tx_considx = 0;
906: sc->vge_ldata.vge_tx_free = VGE_TX_DESC_CNT;
907:
908: return (0);
909: }
910:
911: /* Init RX descriptors and allocate mbufs with vge_newbuf()
912: * A ring is used, and last descriptor points to first. */
913: int
914: vge_rx_list_init(struct vge_softc *sc)
915: {
916: int i;
917:
918: bzero ((char *)sc->vge_ldata.vge_rx_list, VGE_RX_LIST_SZ);
919: bzero ((char *)&sc->vge_ldata.vge_rx_mbuf,
920: (VGE_RX_DESC_CNT * sizeof(struct mbuf *)));
921:
922: sc->vge_rx_consumed = 0;
923:
924: for (i = 0; i < VGE_RX_DESC_CNT; i++) {
925: if (vge_newbuf(sc, i, NULL) == ENOBUFS)
926: return (ENOBUFS);
927: }
928:
929: /* Flush the RX descriptors */
930:
931: bus_dmamap_sync(sc->sc_dmat,
932: sc->vge_ldata.vge_rx_list_map,
933: 0, sc->vge_ldata.vge_rx_list_map->dm_mapsize,
934: BUS_DMASYNC_PREWRITE|BUS_DMASYNC_PREREAD);
935:
936: sc->vge_ldata.vge_rx_prodidx = 0;
937: sc->vge_rx_consumed = 0;
938: sc->vge_head = sc->vge_tail = NULL;
939:
940: return (0);
941: }
942:
943: /*
944: * RX handler. We support the reception of jumbo frames that have
945: * been fragmented across multiple 2K mbuf cluster buffers.
946: */
947: void
948: vge_rxeof(struct vge_softc *sc)
949: {
950: struct mbuf *m;
951: struct ifnet *ifp;
952: int i, total_len;
953: int lim = 0;
954: struct vge_rx_desc *cur_rx;
955: u_int32_t rxstat, rxctl;
956:
957: ifp = &sc->arpcom.ac_if;
958: i = sc->vge_ldata.vge_rx_prodidx;
959:
960: /* Invalidate the descriptor memory */
961:
962: bus_dmamap_sync(sc->sc_dmat,
963: sc->vge_ldata.vge_rx_list_map,
964: 0, sc->vge_ldata.vge_rx_list_map->dm_mapsize,
965: BUS_DMASYNC_POSTREAD);
966:
967: while (!VGE_OWN(&sc->vge_ldata.vge_rx_list[i])) {
968: struct mbuf *m0 = NULL;
969:
970: cur_rx = &sc->vge_ldata.vge_rx_list[i];
971: m = sc->vge_ldata.vge_rx_mbuf[i];
972: total_len = VGE_RXBYTES(cur_rx);
973: rxstat = letoh32(cur_rx->vge_sts);
974: rxctl = letoh32(cur_rx->vge_ctl);
975:
976: /* Invalidate the RX mbuf and unload its map */
977:
978: bus_dmamap_sync(sc->sc_dmat,
979: sc->vge_ldata.vge_rx_dmamap[i],
980: 0, sc->vge_ldata.vge_rx_dmamap[i]->dm_mapsize,
981: BUS_DMASYNC_POSTWRITE);
982: bus_dmamap_unload(sc->sc_dmat,
983: sc->vge_ldata.vge_rx_dmamap[i]);
984:
985: /*
986: * If the 'start of frame' bit is set, this indicates
987: * either the first fragment in a multi-fragment receive,
988: * or an intermediate fragment. Either way, we want to
989: * accumulate the buffers.
990: */
991: if (rxstat & VGE_RXPKT_SOF) {
992: DPRINTF(("vge_rxeof: SOF\n"));
993: m->m_len = MCLBYTES;
994: if (sc->vge_head == NULL)
995: sc->vge_head = sc->vge_tail = m;
996: else {
997: m->m_flags &= ~M_PKTHDR;
998: sc->vge_tail->m_next = m;
999: sc->vge_tail = m;
1000: }
1001: vge_newbuf(sc, i, NULL);
1002: VGE_RX_DESC_INC(i);
1003: continue;
1004: }
1005:
1006: /*
1007: * Bad/error frames will have the RXOK bit cleared.
1008: * However, there's one error case we want to allow:
1009: * if a VLAN tagged frame arrives and the chip can't
1010: * match it against the CAM filter, it considers this
1011: * a 'VLAN CAM filter miss' and clears the 'RXOK' bit.
1012: * We don't want to drop the frame though: our VLAN
1013: * filtering is done in software.
1014: */
1015: if (!(rxstat & VGE_RDSTS_RXOK) && !(rxstat & VGE_RDSTS_VIDM)
1016: && !(rxstat & VGE_RDSTS_CSUMERR)) {
1017: ifp->if_ierrors++;
1018: /*
1019: * If this is part of a multi-fragment packet,
1020: * discard all the pieces.
1021: */
1022: if (sc->vge_head != NULL) {
1023: m_freem(sc->vge_head);
1024: sc->vge_head = sc->vge_tail = NULL;
1025: }
1026: vge_newbuf(sc, i, m);
1027: VGE_RX_DESC_INC(i);
1028: continue;
1029: }
1030:
1031: /*
1032: * If allocating a replacement mbuf fails,
1033: * reload the current one.
1034: */
1035:
1036: if (vge_newbuf(sc, i, NULL) == ENOBUFS) {
1037: if (sc->vge_head != NULL) {
1038: m_freem(sc->vge_head);
1039: sc->vge_head = sc->vge_tail = NULL;
1040: }
1041:
1042: m0 = m_devget(mtod(m, char *) - ETHER_ALIGN,
1043: total_len - ETHER_CRC_LEN + ETHER_ALIGN,
1044: 0, ifp, NULL);
1045: vge_newbuf(sc, i, m);
1046: if (m0 == NULL) {
1047: ifp->if_ierrors++;
1048: continue;
1049: }
1050: m_adj(m0, ETHER_ALIGN);
1051: m = m0;
1052:
1053: VGE_RX_DESC_INC(i);
1054: continue;
1055: }
1056:
1057: VGE_RX_DESC_INC(i);
1058:
1059: if (sc->vge_head != NULL) {
1060: m->m_len = total_len % MCLBYTES;
1061: /*
1062: * Special case: if there's 4 bytes or less
1063: * in this buffer, the mbuf can be discarded:
1064: * the last 4 bytes is the CRC, which we don't
1065: * care about anyway.
1066: */
1067: if (m->m_len <= ETHER_CRC_LEN) {
1068: sc->vge_tail->m_len -=
1069: (ETHER_CRC_LEN - m->m_len);
1070: m_freem(m);
1071: } else {
1072: m->m_len -= ETHER_CRC_LEN;
1073: m->m_flags &= ~M_PKTHDR;
1074: sc->vge_tail->m_next = m;
1075: }
1076: m = sc->vge_head;
1077: sc->vge_head = sc->vge_tail = NULL;
1078: m->m_pkthdr.len = total_len - ETHER_CRC_LEN;
1079: } else
1080: m->m_pkthdr.len = m->m_len =
1081: (total_len - ETHER_CRC_LEN);
1082:
1083: #ifdef __STRICT_ALIGNMENT
1084: bcopy(m->m_data, m->m_data + ETHER_ALIGN,
1085: total_len);
1086: m->m_data += ETHER_ALIGN;
1087: #endif
1088: ifp->if_ipackets++;
1089: m->m_pkthdr.rcvif = ifp;
1090:
1091: /* Do RX checksumming */
1092:
1093: /* Check IP header checksum */
1094: if ((rxctl & VGE_RDCTL_IPPKT) &&
1095: (rxctl & VGE_RDCTL_IPCSUMOK))
1096: m->m_pkthdr.csum_flags |= M_IPV4_CSUM_IN_OK;
1097:
1098: /* Check TCP/UDP checksum */
1099: if ((rxctl & (VGE_RDCTL_TCPPKT|VGE_RDCTL_UDPPKT)) &&
1100: (rxctl & VGE_RDCTL_PROTOCSUMOK))
1101: m->m_pkthdr.csum_flags |= M_TCP_CSUM_IN_OK | M_UDP_CSUM_IN_OK;
1102:
1103: #if NBPFILTER > 0
1104: if (ifp->if_bpf)
1105: bpf_mtap(ifp->if_bpf, m, BPF_DIRECTION_IN);
1106: #endif
1107: ether_input_mbuf(ifp, m);
1108:
1109: lim++;
1110: if (lim == VGE_RX_DESC_CNT)
1111: break;
1112: }
1113:
1114: /* Flush the RX DMA ring */
1115: bus_dmamap_sync(sc->sc_dmat,
1116: sc->vge_ldata.vge_rx_list_map,
1117: 0, sc->vge_ldata.vge_rx_list_map->dm_mapsize,
1118: BUS_DMASYNC_PREWRITE|BUS_DMASYNC_PREREAD);
1119:
1120: sc->vge_ldata.vge_rx_prodidx = i;
1121: CSR_WRITE_2(sc, VGE_RXDESC_RESIDUECNT, lim);
1122: }
1123:
1124: void
1125: vge_txeof(struct vge_softc *sc)
1126: {
1127: struct ifnet *ifp;
1128: u_int32_t txstat;
1129: int idx;
1130:
1131: ifp = &sc->arpcom.ac_if;
1132: idx = sc->vge_ldata.vge_tx_considx;
1133:
1134: /* Invalidate the TX descriptor list */
1135:
1136: bus_dmamap_sync(sc->sc_dmat,
1137: sc->vge_ldata.vge_tx_list_map,
1138: 0, sc->vge_ldata.vge_tx_list_map->dm_mapsize,
1139: BUS_DMASYNC_POSTREAD);
1140:
1141: /* Transmitted frames can be now free'd from the TX list */
1142: while (idx != sc->vge_ldata.vge_tx_prodidx) {
1143: txstat = letoh32(sc->vge_ldata.vge_tx_list[idx].vge_sts);
1144: if (txstat & VGE_TDSTS_OWN)
1145: break;
1146:
1147: m_freem(sc->vge_ldata.vge_tx_mbuf[idx]);
1148: sc->vge_ldata.vge_tx_mbuf[idx] = NULL;
1149: bus_dmamap_unload(sc->sc_dmat,
1150: sc->vge_ldata.vge_tx_dmamap[idx]);
1151: if (txstat & (VGE_TDSTS_EXCESSCOLL|VGE_TDSTS_COLL))
1152: ifp->if_collisions++;
1153: if (txstat & VGE_TDSTS_TXERR)
1154: ifp->if_oerrors++;
1155: else
1156: ifp->if_opackets++;
1157:
1158: sc->vge_ldata.vge_tx_free++;
1159: VGE_TX_DESC_INC(idx);
1160: }
1161:
1162: /* No changes made to the TX ring, so no flush needed */
1163:
1164: if (idx != sc->vge_ldata.vge_tx_considx) {
1165: sc->vge_ldata.vge_tx_considx = idx;
1166: ifp->if_flags &= ~IFF_OACTIVE;
1167: ifp->if_timer = 0;
1168: }
1169:
1170: /*
1171: * If not all descriptors have been released reaped yet,
1172: * reload the timer so that we will eventually get another
1173: * interrupt that will cause us to re-enter this routine.
1174: * This is done in case the transmitter has gone idle.
1175: */
1176: if (sc->vge_ldata.vge_tx_free != VGE_TX_DESC_CNT)
1177: CSR_WRITE_1(sc, VGE_CRS1, VGE_CR1_TIMER0_ENABLE);
1178: }
1179:
1180: void
1181: vge_tick(void *xsc)
1182: {
1183: struct vge_softc *sc = xsc;
1184: struct ifnet *ifp = &sc->arpcom.ac_if;
1185: struct mii_data *mii = &sc->sc_mii;
1186: int s;
1187:
1188: s = splnet();
1189:
1190: mii_tick(mii);
1191:
1192: if (sc->vge_link) {
1193: if (!(mii->mii_media_status & IFM_ACTIVE)) {
1194: sc->vge_link = 0;
1195: ifp->if_link_state = LINK_STATE_DOWN;
1196: if_link_state_change(ifp);
1197: }
1198: } else {
1199: if (mii->mii_media_status & IFM_ACTIVE &&
1200: IFM_SUBTYPE(mii->mii_media_active) != IFM_NONE) {
1201: sc->vge_link = 1;
1202: if (mii->mii_media_status & IFM_FDX)
1203: ifp->if_link_state = LINK_STATE_FULL_DUPLEX;
1204: else if (mii->mii_media_status & IFM_HDX)
1205: ifp->if_link_state = LINK_STATE_HALF_DUPLEX;
1206: else
1207: ifp->if_link_state = LINK_STATE_UP;
1208: if_link_state_change(ifp);
1209: if (!IFQ_IS_EMPTY(&ifp->if_snd))
1210: vge_start(ifp);
1211: }
1212: }
1213: timeout_add(&sc->timer_handle, hz);
1214: splx(s);
1215: }
1216:
1217: int
1218: vge_intr(void *arg)
1219: {
1220: struct vge_softc *sc = arg;
1221: struct ifnet *ifp;
1222: u_int32_t status;
1223: int claimed = 0;
1224:
1225: ifp = &sc->arpcom.ac_if;
1226:
1227: if (!(ifp->if_flags & IFF_UP))
1228: return 0;
1229:
1230: /* Disable interrupts */
1231: CSR_WRITE_1(sc, VGE_CRC3, VGE_CR3_INT_GMSK);
1232:
1233: for (;;) {
1234: status = CSR_READ_4(sc, VGE_ISR);
1235: DPRINTFN(3, ("vge_intr: status=%#x\n", status));
1236:
1237: /* If the card has gone away the read returns 0xffffffff. */
1238: if (status == 0xFFFFFFFF)
1239: break;
1240:
1241: if (status) {
1242: CSR_WRITE_4(sc, VGE_ISR, status);
1243: }
1244:
1245: if ((status & VGE_INTRS) == 0)
1246: break;
1247:
1248: claimed = 1;
1249:
1250: if (status & (VGE_ISR_RXOK|VGE_ISR_RXOK_HIPRIO))
1251: vge_rxeof(sc);
1252:
1253: if (status & (VGE_ISR_RXOFLOW|VGE_ISR_RXNODESC)) {
1254: DPRINTFN(2, ("vge_intr: RX error, recovering\n"));
1255: vge_rxeof(sc);
1256: CSR_WRITE_1(sc, VGE_RXQCSRS, VGE_RXQCSR_RUN);
1257: CSR_WRITE_1(sc, VGE_RXQCSRS, VGE_RXQCSR_WAK);
1258: }
1259:
1260: if (status & (VGE_ISR_TXOK0|VGE_ISR_TIMER0))
1261: vge_txeof(sc);
1262:
1263: if (status & (VGE_ISR_TXDMA_STALL|VGE_ISR_RXDMA_STALL)) {
1264: DPRINTFN(2, ("DMA_STALL\n"));
1265: vge_init(ifp);
1266: }
1267:
1268: if (status & VGE_ISR_LINKSTS) {
1269: timeout_del(&sc->timer_handle);
1270: vge_tick(sc);
1271: }
1272: }
1273:
1274: /* Re-enable interrupts */
1275: CSR_WRITE_1(sc, VGE_CRS3, VGE_CR3_INT_GMSK);
1276:
1277: if (!IFQ_IS_EMPTY(&ifp->if_snd))
1278: vge_start(ifp);
1279:
1280: return (claimed);
1281: }
1282:
1283: /*
1284: * Encapsulate an mbuf chain into the TX ring by combining it w/
1285: * the descriptors.
1286: */
1287: int
1288: vge_encap(struct vge_softc *sc, struct mbuf *m_head, int idx)
1289: {
1290: struct ifnet *ifp = &sc->arpcom.ac_if;
1291: bus_dmamap_t txmap;
1292: struct vge_tx_desc *d = NULL;
1293: struct vge_tx_frag *f;
1294: struct mbuf *mnew = NULL;
1295: int error, frag;
1296: u_int32_t vge_flags;
1297: #if NVLAN > 0
1298: struct ifvlan *ifv = NULL;
1299:
1300: if ((m_head->m_flags & (M_PROTO1|M_PKTHDR)) == (M_PROTO1|M_PKTHDR) &&
1301: m_head->m_pkthdr.rcvif != NULL)
1302: ifv = m_head->m_pkthdr.rcvif->if_softc;
1303: #endif
1304:
1305: vge_flags = 0;
1306:
1307: if (m_head->m_pkthdr.csum_flags & M_IPV4_CSUM_OUT)
1308: vge_flags |= VGE_TDCTL_IPCSUM;
1309: if (m_head->m_pkthdr.csum_flags & M_TCPV4_CSUM_OUT)
1310: vge_flags |= VGE_TDCTL_TCPCSUM;
1311: if (m_head->m_pkthdr.csum_flags & M_UDPV4_CSUM_OUT)
1312: vge_flags |= VGE_TDCTL_UDPCSUM;
1313:
1314: txmap = sc->vge_ldata.vge_tx_dmamap[idx];
1315: repack:
1316: error = bus_dmamap_load_mbuf(sc->sc_dmat, txmap,
1317: m_head, BUS_DMA_NOWAIT);
1318: if (error) {
1319: printf("%s: can't map mbuf (error %d)\n",
1320: sc->vge_dev.dv_xname, error);
1321: return (ENOBUFS);
1322: }
1323:
1324: d = &sc->vge_ldata.vge_tx_list[idx];
1325: /* If owned by chip, fail */
1326: if (letoh32(d->vge_sts) & VGE_TDSTS_OWN)
1327: return (ENOBUFS);
1328:
1329: for (frag = 0; frag < txmap->dm_nsegs; frag++) {
1330: /* Check if we have used all 7 fragments. */
1331: if (frag == VGE_TX_FRAGS)
1332: break;
1333: f = &d->vge_frag[frag];
1334: f->vge_buflen = htole16(VGE_BUFLEN(txmap->dm_segs[frag].ds_len));
1335: f->vge_addrlo = htole32(VGE_ADDR_LO(txmap->dm_segs[frag].ds_addr));
1336: f->vge_addrhi = htole16(VGE_ADDR_HI(txmap->dm_segs[frag].ds_addr) & 0xFFFF);
1337: }
1338:
1339: /*
1340: * We used up all 7 fragments! Now what we have to do is
1341: * copy the data into a mbuf cluster and map that.
1342: */
1343: if (frag == VGE_TX_FRAGS) {
1344: MGETHDR(mnew, M_DONTWAIT, MT_DATA);
1345: if (mnew == NULL)
1346: return (ENOBUFS);
1347:
1348: if (m_head->m_pkthdr.len > MHLEN) {
1349: MCLGET(mnew, M_DONTWAIT);
1350: if (!(mnew->m_flags & M_EXT)) {
1351: m_freem(mnew);
1352: return (ENOBUFS);
1353: }
1354: }
1355: m_copydata(m_head, 0, m_head->m_pkthdr.len,
1356: mtod(mnew, caddr_t));
1357: mnew->m_pkthdr.len = mnew->m_len = m_head->m_pkthdr.len;
1358: IFQ_DEQUEUE(&ifp->if_snd, m_head);
1359: m_freem(m_head);
1360: m_head = mnew;
1361: goto repack;
1362: }
1363:
1364: /* This chip does not do auto-padding */
1365: if (m_head->m_pkthdr.len < VGE_MIN_FRAMELEN) {
1366: f = &d->vge_frag[frag];
1367:
1368: f->vge_buflen = htole16(VGE_BUFLEN(VGE_MIN_FRAMELEN -
1369: m_head->m_pkthdr.len));
1370: f->vge_addrlo = htole32(VGE_ADDR_LO(txmap->dm_segs[0].ds_addr));
1371: f->vge_addrhi = htole16(VGE_ADDR_HI(txmap->dm_segs[0].ds_addr) & 0xFFFF);
1372: m_head->m_pkthdr.len = VGE_MIN_FRAMELEN;
1373: frag++;
1374: }
1375: /* For some reason, we need to tell the card fragment + 1 */
1376: frag++;
1377:
1378: bus_dmamap_sync(sc->sc_dmat, txmap, 0, txmap->dm_mapsize,
1379: BUS_DMASYNC_PREWRITE);
1380:
1381: d->vge_sts = htole32(m_head->m_pkthdr.len << 16);
1382: d->vge_ctl = htole32(vge_flags|(frag << 28) | VGE_TD_LS_NORM);
1383:
1384: if (m_head->m_pkthdr.len > ETHERMTU + ETHER_HDR_LEN)
1385: d->vge_ctl |= htole32(VGE_TDCTL_JUMBO);
1386:
1387: sc->vge_ldata.vge_tx_dmamap[idx] = txmap;
1388: sc->vge_ldata.vge_tx_mbuf[idx] = m_head;
1389: sc->vge_ldata.vge_tx_free--;
1390: sc->vge_ldata.vge_tx_list[idx].vge_sts |= htole32(VGE_TDSTS_OWN);
1391:
1392: /*
1393: * Set up hardware VLAN tagging.
1394: */
1395: #if NVLAN > 0
1396: if (ifv != NULL) {
1397: sc->vge_ldata.vge_tx_list[idx].vge_ctl |=
1398: htole32(htons(ifv->ifv_tag) | VGE_TDCTL_VTAG);
1399: }
1400: #endif
1401:
1402: idx++;
1403: if (mnew == NULL) {
1404: /* if mbuf is coalesced, it is already dequeued */
1405: IFQ_DEQUEUE(&ifp->if_snd, m_head);
1406: }
1407: return (0);
1408: }
1409:
1410: /*
1411: * Main transmit routine.
1412: */
1413: void
1414: vge_start(struct ifnet *ifp)
1415: {
1416: struct vge_softc *sc;
1417: struct mbuf *m_head = NULL;
1418: int idx, pidx = 0;
1419:
1420: sc = ifp->if_softc;
1421:
1422: if (!sc->vge_link || ifp->if_flags & IFF_OACTIVE)
1423: return;
1424:
1425: if (IFQ_IS_EMPTY(&ifp->if_snd))
1426: return;
1427:
1428: idx = sc->vge_ldata.vge_tx_prodidx;
1429:
1430: pidx = idx - 1;
1431: if (pidx < 0)
1432: pidx = VGE_TX_DESC_CNT - 1;
1433:
1434: while (sc->vge_ldata.vge_tx_mbuf[idx] == NULL) {
1435: IFQ_POLL(&ifp->if_snd, m_head);
1436: if (m_head == NULL)
1437: break;
1438:
1439: /*
1440: * If there's a BPF listener, bounce a copy of this frame
1441: * to him.
1442: */
1443: #if NBPFILTER > 0
1444: if (ifp->if_bpf)
1445: bpf_mtap(ifp->if_bpf, m_head, BPF_DIRECTION_OUT);
1446: #endif
1447:
1448: if (vge_encap(sc, m_head, idx)) {
1449: ifp->if_flags |= IFF_OACTIVE;
1450: break;
1451: }
1452:
1453: sc->vge_ldata.vge_tx_list[pidx].vge_frag[0].vge_buflen |=
1454: htole16(VGE_TXDESC_Q);
1455:
1456: pidx = idx;
1457: VGE_TX_DESC_INC(idx);
1458: }
1459:
1460: if (idx == sc->vge_ldata.vge_tx_prodidx) {
1461: return;
1462: }
1463:
1464: /* Flush the TX descriptors */
1465:
1466: bus_dmamap_sync(sc->sc_dmat,
1467: sc->vge_ldata.vge_tx_list_map,
1468: 0, sc->vge_ldata.vge_tx_list_map->dm_mapsize,
1469: BUS_DMASYNC_PREWRITE|BUS_DMASYNC_PREREAD);
1470:
1471: /* Issue a transmit command. */
1472: CSR_WRITE_2(sc, VGE_TXQCSRS, VGE_TXQCSR_WAK0);
1473:
1474: sc->vge_ldata.vge_tx_prodidx = idx;
1475:
1476: /*
1477: * Use the countdown timer for interrupt moderation.
1478: * 'TX done' interrupts are disabled. Instead, we reset the
1479: * countdown timer, which will begin counting until it hits
1480: * the value in the SSTIMER register, and then trigger an
1481: * interrupt. Each time we set the TIMER0_ENABLE bit, the
1482: * the timer count is reloaded. Only when the transmitter
1483: * is idle will the timer hit 0 and an interrupt fire.
1484: */
1485: CSR_WRITE_1(sc, VGE_CRS1, VGE_CR1_TIMER0_ENABLE);
1486:
1487: /*
1488: * Set a timeout in case the chip goes out to lunch.
1489: */
1490: ifp->if_timer = 5;
1491: }
1492:
1493: int
1494: vge_init(struct ifnet *ifp)
1495: {
1496: struct vge_softc *sc = ifp->if_softc;
1497: int i;
1498:
1499: /*
1500: * Cancel pending I/O and free all RX/TX buffers.
1501: */
1502: vge_stop(sc);
1503: vge_reset(sc);
1504:
1505: /* Initialize RX descriptors list */
1506: if (vge_rx_list_init(sc) == ENOBUFS) {
1507: printf("%s: init failed: no memory for RX buffers\n",
1508: sc->vge_dev.dv_xname);
1509: vge_stop(sc);
1510: return (ENOBUFS);
1511: }
1512: /* Initialize TX descriptors */
1513: if (vge_tx_list_init(sc) == ENOBUFS) {
1514: printf("%s: init failed: no memory for TX buffers\n",
1515: sc->vge_dev.dv_xname);
1516: vge_stop(sc);
1517: return (ENOBUFS);
1518: }
1519:
1520: /* Set our station address */
1521: for (i = 0; i < ETHER_ADDR_LEN; i++)
1522: CSR_WRITE_1(sc, VGE_PAR0 + i, sc->arpcom.ac_enaddr[i]);
1523:
1524: /*
1525: * Set receive FIFO threshold. Also allow transmission and
1526: * reception of VLAN tagged frames.
1527: */
1528: CSR_CLRBIT_1(sc, VGE_RXCFG, VGE_RXCFG_FIFO_THR|VGE_RXCFG_VTAGOPT);
1529: CSR_SETBIT_1(sc, VGE_RXCFG, VGE_RXFIFOTHR_128BYTES|VGE_VTAG_OPT2);
1530:
1531: /* Set DMA burst length */
1532: CSR_CLRBIT_1(sc, VGE_DMACFG0, VGE_DMACFG0_BURSTLEN);
1533: CSR_SETBIT_1(sc, VGE_DMACFG0, VGE_DMABURST_128);
1534:
1535: CSR_SETBIT_1(sc, VGE_TXCFG, VGE_TXCFG_ARB_PRIO|VGE_TXCFG_NONBLK);
1536:
1537: /* Set collision backoff algorithm */
1538: CSR_CLRBIT_1(sc, VGE_CHIPCFG1, VGE_CHIPCFG1_CRANDOM|
1539: VGE_CHIPCFG1_CAP|VGE_CHIPCFG1_MBA|VGE_CHIPCFG1_BAKOPT);
1540: CSR_SETBIT_1(sc, VGE_CHIPCFG1, VGE_CHIPCFG1_OFSET);
1541:
1542: /* Disable LPSEL field in priority resolution */
1543: CSR_SETBIT_1(sc, VGE_DIAGCTL, VGE_DIAGCTL_LPSEL_DIS);
1544:
1545: /*
1546: * Load the addresses of the DMA queues into the chip.
1547: * Note that we only use one transmit queue.
1548: */
1549:
1550: CSR_WRITE_4(sc, VGE_TXDESC_ADDR_LO0,
1551: VGE_ADDR_LO(sc->vge_ldata.vge_tx_listseg.ds_addr));
1552: CSR_WRITE_2(sc, VGE_TXDESCNUM, VGE_TX_DESC_CNT - 1);
1553:
1554: CSR_WRITE_4(sc, VGE_RXDESC_ADDR_LO,
1555: VGE_ADDR_LO(sc->vge_ldata.vge_rx_listseg.ds_addr));
1556: CSR_WRITE_2(sc, VGE_RXDESCNUM, VGE_RX_DESC_CNT - 1);
1557: CSR_WRITE_2(sc, VGE_RXDESC_RESIDUECNT, VGE_RX_DESC_CNT);
1558:
1559: /* Enable and wake up the RX descriptor queue */
1560: CSR_WRITE_1(sc, VGE_RXQCSRS, VGE_RXQCSR_RUN);
1561: CSR_WRITE_1(sc, VGE_RXQCSRS, VGE_RXQCSR_WAK);
1562:
1563: /* Enable the TX descriptor queue */
1564: CSR_WRITE_2(sc, VGE_TXQCSRS, VGE_TXQCSR_RUN0);
1565:
1566: /* Set up the receive filter -- allow large frames for VLANs. */
1567: CSR_WRITE_1(sc, VGE_RXCTL, VGE_RXCTL_RX_UCAST|VGE_RXCTL_RX_GIANT);
1568:
1569: /* If we want promiscuous mode, set the allframes bit. */
1570: if (ifp->if_flags & IFF_PROMISC) {
1571: CSR_SETBIT_1(sc, VGE_RXCTL, VGE_RXCTL_RX_PROMISC);
1572: }
1573:
1574: /* Set capture broadcast bit to capture broadcast frames. */
1575: if (ifp->if_flags & IFF_BROADCAST) {
1576: CSR_SETBIT_1(sc, VGE_RXCTL, VGE_RXCTL_RX_BCAST);
1577: }
1578:
1579: /* Set multicast bit to capture multicast frames. */
1580: if (ifp->if_flags & IFF_MULTICAST) {
1581: CSR_SETBIT_1(sc, VGE_RXCTL, VGE_RXCTL_RX_MCAST);
1582: }
1583:
1584: /* Init the cam filter. */
1585: vge_cam_clear(sc);
1586:
1587: /* Init the multicast filter. */
1588: vge_setmulti(sc);
1589:
1590: /* Enable flow control */
1591:
1592: CSR_WRITE_1(sc, VGE_CRS2, 0x8B);
1593:
1594: /* Enable jumbo frame reception (if desired) */
1595:
1596: /* Start the MAC. */
1597: CSR_WRITE_1(sc, VGE_CRC0, VGE_CR0_STOP);
1598: CSR_WRITE_1(sc, VGE_CRS1, VGE_CR1_NOPOLL);
1599: CSR_WRITE_1(sc, VGE_CRS0,
1600: VGE_CR0_TX_ENABLE|VGE_CR0_RX_ENABLE|VGE_CR0_START);
1601:
1602: /*
1603: * Configure one-shot timer for microsecond
1604: * resulution and load it for 500 usecs.
1605: */
1606: CSR_SETBIT_1(sc, VGE_DIAGCTL, VGE_DIAGCTL_TIMER0_RES);
1607: CSR_WRITE_2(sc, VGE_SSTIMER, 400);
1608:
1609: /*
1610: * Configure interrupt moderation for receive. Enable
1611: * the holdoff counter and load it, and set the RX
1612: * suppression count to the number of descriptors we
1613: * want to allow before triggering an interrupt.
1614: * The holdoff timer is in units of 20 usecs.
1615: */
1616:
1617: #ifdef notyet
1618: CSR_WRITE_1(sc, VGE_INTCTL1, VGE_INTCTL_TXINTSUP_DISABLE);
1619: /* Select the interrupt holdoff timer page. */
1620: CSR_CLRBIT_1(sc, VGE_CAMCTL, VGE_CAMCTL_PAGESEL);
1621: CSR_SETBIT_1(sc, VGE_CAMCTL, VGE_PAGESEL_INTHLDOFF);
1622: CSR_WRITE_1(sc, VGE_INTHOLDOFF, 10); /* ~200 usecs */
1623:
1624: /* Enable use of the holdoff timer. */
1625: CSR_WRITE_1(sc, VGE_CRS3, VGE_CR3_INT_HOLDOFF);
1626: CSR_WRITE_1(sc, VGE_INTCTL1, VGE_INTCTL_SC_RELOAD);
1627:
1628: /* Select the RX suppression threshold page. */
1629: CSR_CLRBIT_1(sc, VGE_CAMCTL, VGE_CAMCTL_PAGESEL);
1630: CSR_SETBIT_1(sc, VGE_CAMCTL, VGE_PAGESEL_RXSUPPTHR);
1631: CSR_WRITE_1(sc, VGE_RXSUPPTHR, 64); /* interrupt after 64 packets */
1632:
1633: /* Restore the page select bits. */
1634: CSR_CLRBIT_1(sc, VGE_CAMCTL, VGE_CAMCTL_PAGESEL);
1635: CSR_SETBIT_1(sc, VGE_CAMCTL, VGE_PAGESEL_MAR);
1636: #endif
1637:
1638: /*
1639: * Enable interrupts.
1640: */
1641: CSR_WRITE_4(sc, VGE_IMR, VGE_INTRS);
1642: CSR_WRITE_4(sc, VGE_ISR, 0);
1643: CSR_WRITE_1(sc, VGE_CRS3, VGE_CR3_INT_GMSK);
1644:
1645: /* Restore BMCR state */
1646: mii_mediachg(&sc->sc_mii);
1647:
1648: ifp->if_flags |= IFF_RUNNING;
1649: ifp->if_flags &= ~IFF_OACTIVE;
1650:
1651: sc->vge_if_flags = 0;
1652: sc->vge_link = 0;
1653:
1654: if (!timeout_pending(&sc->timer_handle))
1655: timeout_add(&sc->timer_handle, hz);
1656:
1657: return (0);
1658: }
1659:
1660: /*
1661: * Set media options.
1662: */
1663: int
1664: vge_ifmedia_upd(struct ifnet *ifp)
1665: {
1666: struct vge_softc *sc = ifp->if_softc;
1667:
1668: return (mii_mediachg(&sc->sc_mii));
1669: }
1670:
1671: /*
1672: * Report current media status.
1673: */
1674: void
1675: vge_ifmedia_sts(struct ifnet *ifp, struct ifmediareq *ifmr)
1676: {
1677: struct vge_softc *sc = ifp->if_softc;
1678:
1679: mii_pollstat(&sc->sc_mii);
1680: ifmr->ifm_active = sc->sc_mii.mii_media_active;
1681: ifmr->ifm_status = sc->sc_mii.mii_media_status;
1682: }
1683:
1684: void
1685: vge_miibus_statchg(struct device *dev)
1686: {
1687: struct vge_softc *sc = (struct vge_softc *)dev;
1688: struct mii_data *mii;
1689: struct ifmedia_entry *ife;
1690:
1691: mii = &sc->sc_mii;
1692: ife = mii->mii_media.ifm_cur;
1693:
1694: /*
1695: * If the user manually selects a media mode, we need to turn
1696: * on the forced MAC mode bit in the DIAGCTL register. If the
1697: * user happens to choose a full duplex mode, we also need to
1698: * set the 'force full duplex' bit. This applies only to
1699: * 10Mbps and 100Mbps speeds. In autoselect mode, forced MAC
1700: * mode is disabled, and in 1000baseT mode, full duplex is
1701: * always implied, so we turn on the forced mode bit but leave
1702: * the FDX bit cleared.
1703: */
1704:
1705: switch (IFM_SUBTYPE(ife->ifm_media)) {
1706: case IFM_AUTO:
1707: CSR_CLRBIT_1(sc, VGE_DIAGCTL, VGE_DIAGCTL_MACFORCE);
1708: CSR_CLRBIT_1(sc, VGE_DIAGCTL, VGE_DIAGCTL_FDXFORCE);
1709: break;
1710: case IFM_1000_T:
1711: CSR_SETBIT_1(sc, VGE_DIAGCTL, VGE_DIAGCTL_MACFORCE);
1712: CSR_CLRBIT_1(sc, VGE_DIAGCTL, VGE_DIAGCTL_FDXFORCE);
1713: break;
1714: case IFM_100_TX:
1715: case IFM_10_T:
1716: CSR_SETBIT_1(sc, VGE_DIAGCTL, VGE_DIAGCTL_MACFORCE);
1717: if ((ife->ifm_media & IFM_GMASK) == IFM_FDX) {
1718: CSR_SETBIT_1(sc, VGE_DIAGCTL, VGE_DIAGCTL_FDXFORCE);
1719: } else {
1720: CSR_CLRBIT_1(sc, VGE_DIAGCTL, VGE_DIAGCTL_FDXFORCE);
1721: }
1722: break;
1723: default:
1724: printf("%s: unknown media type: %x\n",
1725: sc->vge_dev.dv_xname, IFM_SUBTYPE(ife->ifm_media));
1726: break;
1727: }
1728: }
1729:
1730: int
1731: vge_ioctl(struct ifnet *ifp, u_long command, caddr_t data)
1732: {
1733: struct vge_softc *sc = ifp->if_softc;
1734: struct ifreq *ifr = (struct ifreq *) data;
1735: struct ifaddr *ifa = (struct ifaddr *) data;
1736: int s, error = 0;
1737:
1738: s = splnet();
1739:
1740: if ((error = ether_ioctl(ifp, &sc->arpcom, command, data)) > 0) {
1741: splx(s);
1742: return (error);
1743: }
1744:
1745: switch (command) {
1746: case SIOCSIFADDR:
1747: ifp->if_flags |= IFF_UP;
1748: switch (ifa->ifa_addr->sa_family) {
1749: #ifdef INET
1750: case AF_INET:
1751: vge_init(ifp);
1752: arp_ifinit(&sc->arpcom, ifa);
1753: break;
1754: #endif
1755: default:
1756: vge_init(ifp);
1757: break;
1758: }
1759: break;
1760: case SIOCSIFMTU:
1761: if (ifr->ifr_mtu < ETHERMIN || ifr->ifr_mtu > ifp->if_hardmtu)
1762: error = EINVAL;
1763: else if (ifp->if_mtu != ifr->ifr_mtu)
1764: ifp->if_mtu = ifr->ifr_mtu;
1765: break;
1766: case SIOCSIFFLAGS:
1767: if (ifp->if_flags & IFF_UP) {
1768: if (ifp->if_flags & IFF_RUNNING &&
1769: ifp->if_flags & IFF_PROMISC &&
1770: !(sc->vge_if_flags & IFF_PROMISC)) {
1771: CSR_SETBIT_1(sc, VGE_RXCTL,
1772: VGE_RXCTL_RX_PROMISC);
1773: vge_setmulti(sc);
1774: } else if (ifp->if_flags & IFF_RUNNING &&
1775: !(ifp->if_flags & IFF_PROMISC) &&
1776: sc->vge_if_flags & IFF_PROMISC) {
1777: CSR_CLRBIT_1(sc, VGE_RXCTL,
1778: VGE_RXCTL_RX_PROMISC);
1779: vge_setmulti(sc);
1780: } else
1781: vge_init(ifp);
1782: } else {
1783: if (ifp->if_flags & IFF_RUNNING)
1784: vge_stop(sc);
1785: }
1786: sc->vge_if_flags = ifp->if_flags;
1787: break;
1788: case SIOCADDMULTI:
1789: case SIOCDELMULTI:
1790: error = (command == SIOCADDMULTI) ?
1791: ether_addmulti(ifr, &sc->arpcom) :
1792: ether_delmulti(ifr, &sc->arpcom);
1793:
1794: if (error == ENETRESET) {
1795: if (ifp->if_flags & IFF_RUNNING)
1796: vge_setmulti(sc);
1797: error = 0;
1798: }
1799: break;
1800: case SIOCGIFMEDIA:
1801: case SIOCSIFMEDIA:
1802: error = ifmedia_ioctl(ifp, ifr, &sc->sc_mii.mii_media, command);
1803: break;
1804: default:
1805: error = ENOTTY;
1806: break;
1807: }
1808:
1809: splx(s);
1810: return (error);
1811: }
1812:
1813: void
1814: vge_watchdog(struct ifnet *ifp)
1815: {
1816: struct vge_softc *sc = ifp->if_softc;
1817: int s;
1818:
1819: s = splnet();
1820: printf("%s: watchdog timeout\n", sc->vge_dev.dv_xname);
1821: ifp->if_oerrors++;
1822:
1823: vge_txeof(sc);
1824: vge_rxeof(sc);
1825:
1826: vge_init(ifp);
1827:
1828: splx(s);
1829: }
1830:
1831: /*
1832: * Stop the adapter and free any mbufs allocated to the
1833: * RX and TX lists.
1834: */
1835: void
1836: vge_stop(struct vge_softc *sc)
1837: {
1838: int i;
1839: struct ifnet *ifp;
1840:
1841: ifp = &sc->arpcom.ac_if;
1842: ifp->if_timer = 0;
1843: if (timeout_pending(&sc->timer_handle))
1844: timeout_del(&sc->timer_handle);
1845:
1846: ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE);
1847:
1848: CSR_WRITE_1(sc, VGE_CRC3, VGE_CR3_INT_GMSK);
1849: CSR_WRITE_1(sc, VGE_CRS0, VGE_CR0_STOP);
1850: CSR_WRITE_4(sc, VGE_ISR, 0xFFFFFFFF);
1851: CSR_WRITE_2(sc, VGE_TXQCSRC, 0xFFFF);
1852: CSR_WRITE_1(sc, VGE_RXQCSRC, 0xFF);
1853: CSR_WRITE_4(sc, VGE_RXDESC_ADDR_LO, 0);
1854:
1855: if (sc->vge_head != NULL) {
1856: m_freem(sc->vge_head);
1857: sc->vge_head = sc->vge_tail = NULL;
1858: }
1859:
1860: /* Free the TX list buffers. */
1861: for (i = 0; i < VGE_TX_DESC_CNT; i++) {
1862: if (sc->vge_ldata.vge_tx_mbuf[i] != NULL) {
1863: bus_dmamap_unload(sc->sc_dmat,
1864: sc->vge_ldata.vge_tx_dmamap[i]);
1865: m_freem(sc->vge_ldata.vge_tx_mbuf[i]);
1866: sc->vge_ldata.vge_tx_mbuf[i] = NULL;
1867: }
1868: }
1869:
1870: /* Free the RX list buffers. */
1871: for (i = 0; i < VGE_RX_DESC_CNT; i++) {
1872: if (sc->vge_ldata.vge_rx_mbuf[i] != NULL) {
1873: bus_dmamap_unload(sc->sc_dmat,
1874: sc->vge_ldata.vge_rx_dmamap[i]);
1875: m_freem(sc->vge_ldata.vge_rx_mbuf[i]);
1876: sc->vge_ldata.vge_rx_mbuf[i] = NULL;
1877: }
1878: }
1879: }
CVSweb