File: [local] / sys / dev / raidframe / rf_engine.c (download)
Revision 1.1.1.1 (vendor branch), Tue Mar 4 16:09:47 2008 UTC (16 years, 4 months ago) by nbrk
Branch: OPENBSD_4_2_BASE, MAIN
CVS Tags: jornada-partial-support-wip, HEAD Changes since 1.1: +0 -0 lines
Import of OpenBSD 4.2 release kernel tree with initial code to support
Jornada 720/728, StrongARM 1110-based handheld PC.
At this point kernel roots on NFS and boots into vfs_mountroot() and traps.
What is supported:
- glass console, Jornada framebuffer (jfb) works in 16bpp direct color mode
(needs some palette tweaks for non black/white/blue colors, i think)
- saic, SA11x0 interrupt controller (needs cleanup)
- sacom, SA11x0 UART (supported only as boot console for now)
- SA11x0 GPIO controller fully supported (but can't handle multiple interrupt
handlers on one gpio pin)
- sassp, SSP port on SA11x0 that attaches spibus
- Jornada microcontroller (jmcu) to control kbd, battery, etc throught
the SPI bus (wskbd attaches on jmcu, but not tested)
- tod functions seem work
- initial code for SA-1111 (chip companion) : this is TODO
Next important steps, i think:
- gpio and intc on sa1111
- pcmcia support for sa11x0 (and sa1111 help logic)
- REAL root on nfs when we have PCMCIA support (we may use any of supported pccard NICs)
- root on wd0! (using already supported PCMCIA-ATA)
|
/* $OpenBSD: rf_engine.c,v 1.15 2003/04/27 11:22:54 ho Exp $ */
/* $NetBSD: rf_engine.c,v 1.10 2000/08/20 16:51:03 thorpej Exp $ */
/*
* Copyright (c) 1995 Carnegie-Mellon University.
* All rights reserved.
*
* Author: William V. Courtright II, Mark Holland, Rachad Youssef
*
* Permission to use, copy, modify and distribute this software and
* its documentation is hereby granted, provided that both the copyright
* notice and this permission notice appear in all copies of the
* software, derivative works or modified versions, and any portions
* thereof, and that both notices appear in supporting documentation.
*
* CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS "AS IS"
* CONDITION. CARNEGIE MELLON DISCLAIMS ANY LIABILITY OF ANY KIND
* FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE.
*
* Carnegie Mellon requests users of this software to return to
*
* Software Distribution Coordinator or Software.Distribution@CS.CMU.EDU
* School of Computer Science
* Carnegie Mellon University
* Pittsburgh PA 15213-3890
*
* any improvements or extensions that they make and grant Carnegie the
* rights to redistribute these changes.
*/
/****************************************************************************
* *
* engine.c -- Code for DAG execution engine. *
* *
* Modified to work as follows (holland): *
* A user-thread calls into DispatchDAG, which fires off the nodes that *
* are direct successors to the header node. DispatchDAG then returns, *
* and the rest of the I/O continues asynchronously. As each node *
* completes, the node execution function calls FinishNode(). FinishNode *
* scans the list of successors to the node and increments the antecedent *
* counts. Each node that becomes enabled is placed on a central node *
* queue. A dedicated dag-execution thread grabs nodes off of this *
* queue and fires them. *
* *
* NULL nodes are never fired. *
* *
* Terminator nodes are never fired, but rather cause the callback *
* associated with the DAG to be invoked. *
* *
* If a node fails, the dag either rolls forward to the completion or *
* rolls back, undoing previously-completed nodes and fails atomically. *
* The direction of recovery is determined by the location of the failed *
* node in the graph. If the failure occurred before the commit node in *
* the graph, backward recovery is used. Otherwise, forward recovery is *
* used. *
* *
****************************************************************************/
#include "rf_threadstuff.h"
#include <sys/errno.h>
#include "rf_dag.h"
#include "rf_engine.h"
#include "rf_etimer.h"
#include "rf_general.h"
#include "rf_dagutils.h"
#include "rf_shutdown.h"
#include "rf_raid.h"
int rf_BranchDone(RF_DagNode_t *);
int rf_NodeReady(RF_DagNode_t *);
void rf_FireNode(RF_DagNode_t *);
void rf_FireNodeArray(int, RF_DagNode_t **);
void rf_FireNodeList(RF_DagNode_t *);
void rf_PropagateResults(RF_DagNode_t *, int);
void rf_ProcessNode(RF_DagNode_t *, int);
void rf_DAGExecutionThread(RF_ThreadArg_t);
#ifdef RAID_AUTOCONFIG
#define RF_ENGINE_PID 10
void rf_DAGExecutionThread_pre(RF_ThreadArg_t);
extern pid_t lastpid;
#endif /* RAID_AUTOCONFIG */
void **rf_hook_cookies;
extern int numraid;
#define DO_INIT(_l_,_r_) \
do { \
int _rc; \
_rc = rf_create_managed_mutex(_l_, &(_r_)->node_queue_mutex); \
if (_rc) { \
return(_rc); \
} \
_rc = rf_create_managed_cond(_l_, &(_r_)->node_queue_cond); \
if (_rc) { \
return(_rc); \
} \
} while (0)
/*
* Synchronization primitives for this file. DO_WAIT should be enclosed
* in a while loop.
*/
/*
* XXX Is this spl-ing really necessary ?
*/
#define DO_LOCK(_r_) \
do { \
ks = splbio(); \
RF_LOCK_MUTEX((_r_)->node_queue_mutex); \
} while (0)
#define DO_UNLOCK(_r_) \
do { \
RF_UNLOCK_MUTEX((_r_)->node_queue_mutex); \
splx(ks); \
} while (0)
#define DO_WAIT(_r_) \
RF_WAIT_COND((_r_)->node_queue, (_r_)->node_queue_mutex)
/* XXX RF_SIGNAL_COND? */
#define DO_SIGNAL(_r_) \
RF_BROADCAST_COND((_r_)->node_queue)
void rf_ShutdownEngine(void *);
void
rf_ShutdownEngine(void *arg)
{
RF_Raid_t *raidPtr;
raidPtr = (RF_Raid_t *) arg;
raidPtr->shutdown_engine = 1;
DO_SIGNAL(raidPtr);
}
int
rf_ConfigureEngine(RF_ShutdownList_t **listp, RF_Raid_t *raidPtr,
RF_Config_t *cfgPtr)
{
int rc;
char raidname[16];
DO_INIT(listp, raidPtr);
raidPtr->node_queue = NULL;
raidPtr->dags_in_flight = 0;
rc = rf_init_managed_threadgroup(listp, &raidPtr->engine_tg);
if (rc)
return (rc);
/*
* We create the execution thread only once per system boot. No need
* to check return code b/c the kernel panics if it can't create the
* thread.
*/
if (rf_engineDebug) {
printf("raid%d: %s engine thread\n", raidPtr->raidid,
(initproc)?"Starting":"Creating");
}
if (rf_hook_cookies == NULL) {
rf_hook_cookies =
malloc(numraid * sizeof(void *),
M_RAIDFRAME, M_NOWAIT);
if (rf_hook_cookies == NULL)
return (ENOMEM);
bzero(rf_hook_cookies, numraid * sizeof(void *));
}
#ifdef RAID_AUTOCONFIG
if (initproc == NULL) {
rf_hook_cookies[raidPtr->raidid] =
startuphook_establish(rf_DAGExecutionThread_pre,
raidPtr);
} else {
#endif /* RAID_AUTOCONFIG */
snprintf(&raidname[0], 16, "raid%d", raidPtr->raidid);
if (RF_CREATE_THREAD(raidPtr->engine_thread,
rf_DAGExecutionThread, raidPtr, &raidname[0])) {
RF_ERRORMSG("RAIDFRAME: Unable to start engine"
" thread\n");
return (ENOMEM);
}
if (rf_engineDebug) {
printf("raid%d: Engine thread started\n",
raidPtr->raidid);
}
RF_THREADGROUP_STARTED(&raidPtr->engine_tg);
#ifdef RAID_AUTOCONFIG
}
#endif
/* XXX Something is missing here... */
#ifdef debug
printf("Skipping the WAIT_START !!!\n");
#endif
/* Engine thread is now running and waiting for work. */
if (rf_engineDebug) {
printf("raid%d: Engine thread running and waiting for events\n",
raidPtr->raidid);
}
rc = rf_ShutdownCreate(listp, rf_ShutdownEngine, raidPtr);
if (rc) {
RF_ERRORMSG3("Unable to add to shutdown list file %s line %d"
" rc=%d\n", __FILE__, __LINE__, rc);
rf_ShutdownEngine(NULL);
}
return (rc);
}
int
rf_BranchDone(RF_DagNode_t *node)
{
int i;
/*
* Return true if forward execution is completed for a node and it's
* succedents.
*/
switch (node->status) {
case rf_wait:
/* Should never be called in this state. */
RF_PANIC();
break;
case rf_fired:
/* Node is currently executing, so we're not done. */
return (RF_FALSE);
case rf_good:
/* For each succedent. */
for (i = 0; i < node->numSuccedents; i++)
/* Recursively check branch. */
if (!rf_BranchDone(node->succedents[i]))
return RF_FALSE;
return RF_TRUE; /*
* Node and all succedent branches aren't in
* fired state.
*/
break;
case rf_bad:
/* Succedents can't fire. */
return (RF_TRUE);
case rf_recover:
/* Should never be called in this state. */
RF_PANIC();
break;
case rf_undone:
case rf_panic:
/* XXX Need to fix this case. */
/* For now, assume that we're done. */
return (RF_TRUE);
break;
default:
/* Illegal node status. */
RF_PANIC();
break;
}
}
int
rf_NodeReady(RF_DagNode_t *node)
{
int ready;
switch (node->dagHdr->status) {
case rf_enable:
case rf_rollForward:
if ((node->status == rf_wait) &&
(node->numAntecedents == node->numAntDone))
ready = RF_TRUE;
else
ready = RF_FALSE;
break;
case rf_rollBackward:
RF_ASSERT(node->numSuccDone <= node->numSuccedents);
RF_ASSERT(node->numSuccFired <= node->numSuccedents);
RF_ASSERT(node->numSuccFired <= node->numSuccDone);
if ((node->status == rf_good) &&
(node->numSuccDone == node->numSuccedents))
ready = RF_TRUE;
else
ready = RF_FALSE;
break;
default:
printf("Execution engine found illegal DAG status"
" in rf_NodeReady\n");
RF_PANIC();
break;
}
return (ready);
}
/*
* User context and dag-exec-thread context:
* Fire a node. The node's status field determines which function, do or undo,
* to be fired.
* This routine assumes that the node's status field has alread been set to
* "fired" or "recover" to indicate the direction of execution.
*/
void
rf_FireNode(RF_DagNode_t *node)
{
switch (node->status) {
case rf_fired:
/* Fire the do function of a node. */
if (rf_engineDebug>1) {
printf("raid%d: Firing node 0x%lx (%s)\n",
node->dagHdr->raidPtr->raidid,
(unsigned long) node, node->name);
}
if (node->flags & RF_DAGNODE_FLAG_YIELD) {
#if (defined(__NetBSD__) || defined(__OpenBSD__)) && defined(_KERNEL)
/* thread_block(); */
/* printf("Need to block the thread here...\n"); */
/*
* XXX thread_block is actually mentioned in
* /usr/include/vm/vm_extern.h
*/
#else
thread_block();
#endif
}
(*(node->doFunc)) (node);
break;
case rf_recover:
/* Fire the undo function of a node. */
if (rf_engineDebug>1) {
printf("raid%d: Firing (undo) node 0x%lx (%s)\n",
node->dagHdr->raidPtr->raidid,
(unsigned long) node, node->name);
}
if (node->flags & RF_DAGNODE_FLAG_YIELD) {
#if (defined(__NetBSD__) || defined(__OpenBSD__)) && defined(_KERNEL)
/* thread_block(); */
/* printf("Need to block the thread here...\n"); */
/*
* XXX thread_block is actually mentioned in
* /usr/include/vm/vm_extern.h
*/
#else
thread_block();
#endif
}
(*(node->undoFunc)) (node);
break;
default:
RF_PANIC();
break;
}
}
/*
* User context:
* Attempt to fire each node in a linear array.
* The entire list is fired atomically.
*/
void
rf_FireNodeArray(int numNodes, RF_DagNode_t **nodeList)
{
RF_DagStatus_t dstat;
RF_DagNode_t *node;
int i, j;
/* First, mark all nodes which are ready to be fired. */
for (i = 0; i < numNodes; i++) {
node = nodeList[i];
dstat = node->dagHdr->status;
RF_ASSERT((node->status == rf_wait) ||
(node->status == rf_good));
if (rf_NodeReady(node)) {
if ((dstat == rf_enable) || (dstat == rf_rollForward)) {
RF_ASSERT(node->status == rf_wait);
if (node->commitNode)
node->dagHdr->numCommits++;
node->status = rf_fired;
for (j = 0; j < node->numAntecedents; j++)
node->antecedents[j]->numSuccFired++;
} else {
RF_ASSERT(dstat == rf_rollBackward);
RF_ASSERT(node->status == rf_good);
/* Only one commit node per graph. */
RF_ASSERT(node->commitNode == RF_FALSE);
node->status = rf_recover;
}
}
}
/* Now, fire the nodes. */
for (i = 0; i < numNodes; i++) {
if ((nodeList[i]->status == rf_fired) ||
(nodeList[i]->status == rf_recover))
rf_FireNode(nodeList[i]);
}
}
/*
* User context:
* Attempt to fire each node in a linked list.
* The entire list is fired atomically.
*/
void
rf_FireNodeList(RF_DagNode_t *nodeList)
{
RF_DagNode_t *node, *next;
RF_DagStatus_t dstat;
int j;
if (nodeList) {
/* First, mark all nodes which are ready to be fired. */
for (node = nodeList; node; node = next) {
next = node->next;
dstat = node->dagHdr->status;
RF_ASSERT((node->status == rf_wait) ||
(node->status == rf_good));
if (rf_NodeReady(node)) {
if ((dstat == rf_enable) ||
(dstat == rf_rollForward)) {
RF_ASSERT(node->status == rf_wait);
if (node->commitNode)
node->dagHdr->numCommits++;
node->status = rf_fired;
for (j = 0; j < node->numAntecedents;
j++)
node->antecedents[j]
->numSuccFired++;
} else {
RF_ASSERT(dstat == rf_rollBackward);
RF_ASSERT(node->status == rf_good);
/* Only one commit node per graph. */
RF_ASSERT(node->commitNode == RF_FALSE);
node->status = rf_recover;
}
}
}
/* Now, fire the nodes. */
for (node = nodeList; node; node = next) {
next = node->next;
if ((node->status == rf_fired) ||
(node->status == rf_recover))
rf_FireNode(node);
}
}
}
/*
* Interrupt context:
* For each succedent,
* propagate required results from node to succedent.
* increment succedent's numAntDone.
* place newly-enable nodes on node queue for firing.
*
* To save context switches, we don't place NIL nodes on the node queue,
* but rather just process them as if they had fired. Note that NIL nodes
* that are the direct successors of the header will actually get fired by
* DispatchDAG, which is fine because no context switches are involved.
*
* Important: when running at user level, this can be called by any
* disk thread, and so the increment and check of the antecedent count
* must be locked. I used the node queue mutex and locked down the
* entire function, but this is certainly overkill.
*/
void
rf_PropagateResults(RF_DagNode_t *node, int context)
{
RF_DagNode_t *s, *a;
RF_Raid_t *raidPtr;
int i, ks;
/* A list of NIL nodes to be finished. */
RF_DagNode_t *finishlist = NULL;
/* List of nodes with failed truedata antecedents. */
RF_DagNode_t *skiplist = NULL;
RF_DagNode_t *firelist = NULL; /* A list of nodes to be fired. */
RF_DagNode_t *q = NULL, *qh = NULL, *next;
int j, skipNode;
raidPtr = node->dagHdr->raidPtr;
DO_LOCK(raidPtr);
/* Debug - validate fire counts. */
for (i = 0; i < node->numAntecedents; i++) {
a = *(node->antecedents + i);
RF_ASSERT(a->numSuccFired >= a->numSuccDone);
RF_ASSERT(a->numSuccFired <= a->numSuccedents);
a->numSuccDone++;
}
switch (node->dagHdr->status) {
case rf_enable:
case rf_rollForward:
for (i = 0; i < node->numSuccedents; i++) {
s = *(node->succedents + i);
RF_ASSERT(s->status == rf_wait);
(s->numAntDone)++;
if (s->numAntDone == s->numAntecedents) {
/* Look for NIL nodes. */
if (s->doFunc == rf_NullNodeFunc) {
/*
* Don't fire NIL nodes, just process
* them.
*/
s->next = finishlist;
finishlist = s;
} else {
/*
* Look to see if the node is to be
* skipped.
*/
skipNode = RF_FALSE;
for (j = 0; j < s->numAntecedents; j++)
if ((s->antType[j] ==
rf_trueData) &&
(s->antecedents[j]->status
== rf_bad))
skipNode = RF_TRUE;
if (skipNode) {
/*
* This node has one or more
* failed true data
* dependencies, so skip it.
*/
s->next = skiplist;
skiplist = s;
} else {
/*
* Add s to list of nodes (q)
* to execute.
*/
if (context != RF_INTR_CONTEXT)
{
/*
* We only have to
* enqueue if we're at
* intr context.
*/
/*
* Put node on a list to
* be fired after we
* unlock.
*/
s->next = firelist;
firelist = s;
} else {
/*
* Enqueue the node for
* the dag exec thread
* to fire.
*/
RF_ASSERT(rf_NodeReady(s));
if (q) {
q->next = s;
q = s;
} else {
qh = q = s;
qh->next = NULL;
}
}
}
}
}
}
if (q) {
/*
* Transfer our local list of nodes to the node
* queue.
*/
q->next = raidPtr->node_queue;
raidPtr->node_queue = qh;
DO_SIGNAL(raidPtr);
}
DO_UNLOCK(raidPtr);
for (; skiplist; skiplist = next) {
next = skiplist->next;
skiplist->status = rf_skipped;
for (i = 0; i < skiplist->numAntecedents; i++) {
skiplist->antecedents[i]->numSuccFired++;
}
if (skiplist->commitNode) {
skiplist->dagHdr->numCommits++;
}
rf_FinishNode(skiplist, context);
}
for (; finishlist; finishlist = next) {
/* NIL nodes: no need to fire them. */
next = finishlist->next;
finishlist->status = rf_good;
for (i = 0; i < finishlist->numAntecedents; i++) {
finishlist->antecedents[i]->numSuccFired++;
}
if (finishlist->commitNode)
finishlist->dagHdr->numCommits++;
/*
* Okay, here we're calling rf_FinishNode() on nodes
* that have the null function as their work proc.
* Such a node could be the terminal node in a DAG.
* If so, it will cause the DAG to complete, which will
* in turn free memory used by the DAG, which includes
* the node in question.
* Thus, we must avoid referencing the node at all
* after calling rf_FinishNode() on it.
*/
/* Recursive call. */
rf_FinishNode(finishlist, context);
}
/* Fire all nodes in firelist. */
rf_FireNodeList(firelist);
break;
case rf_rollBackward:
for (i = 0; i < node->numAntecedents; i++) {
a = *(node->antecedents + i);
RF_ASSERT(a->status == rf_good);
RF_ASSERT(a->numSuccDone <= a->numSuccedents);
RF_ASSERT(a->numSuccDone <= a->numSuccFired);
if (a->numSuccDone == a->numSuccFired) {
if (a->undoFunc == rf_NullNodeFunc) {
/*
* Don't fire NIL nodes, just process
* them.
*/
a->next = finishlist;
finishlist = a;
} else {
if (context != RF_INTR_CONTEXT) {
/*
* We only have to enqueue if
* we're at intr context.
*/
/*
* Put node on a list to
* be fired after we
* unlock.
*/
a->next = firelist;
firelist = a;
} else {
/*
* Enqueue the node for
* the dag exec thread
* to fire.
*/
RF_ASSERT(rf_NodeReady(a));
if (q) {
q->next = a;
q = a;
} else {
qh = q = a;
qh->next = NULL;
}
}
}
}
}
if (q) {
/*
* Transfer our local list of nodes to the node
* queue.
*/
q->next = raidPtr->node_queue;
raidPtr->node_queue = qh;
DO_SIGNAL(raidPtr);
}
DO_UNLOCK(raidPtr);
for (; finishlist; finishlist = next) {
/* NIL nodes: no need to fire them. */
next = finishlist->next;
finishlist->status = rf_good;
/*
* Okay, here we're calling rf_FinishNode() on nodes
* that have the null function as their work proc.
* Such a node could be the first node in a DAG.
* If so, it will cause the DAG to complete, which will
* in turn free memory used by the DAG, which includes
* the node in question.
* Thus, we must avoid referencing the node at all
* after calling rf_FinishNode() on it.
*/
rf_FinishNode(finishlist, context);
/* Recursive call. */
}
/* Fire all nodes in firelist. */
rf_FireNodeList(firelist);
break;
default:
printf("Engine found illegal DAG status in"
" rf_PropagateResults()\n");
RF_PANIC();
break;
}
}
/*
* Process a fired node which has completed.
*/
void
rf_ProcessNode(RF_DagNode_t *node, int context)
{
RF_Raid_t *raidPtr;
raidPtr = node->dagHdr->raidPtr;
switch (node->status) {
case rf_good:
/* Normal case, don't need to do anything. */
break;
case rf_bad:
if ((node->dagHdr->numCommits > 0) ||
(node->dagHdr->numCommitNodes == 0)) {
/* Crossed commit barrier. */
node->dagHdr->status = rf_rollForward;
if (rf_engineDebug || 1) {
printf("raid%d: node (%s) returned fail,"
" rolling forward\n", raidPtr->raidid,
node->name);
}
} else {
/* Never reached commit barrier. */
node->dagHdr->status = rf_rollBackward;
if (rf_engineDebug || 1) {
printf("raid%d: node (%s) returned fail,"
" rolling backward\n", raidPtr->raidid,
node->name);
}
}
break;
case rf_undone:
/* Normal rollBackward case, don't need to do anything. */
break;
case rf_panic:
/* An undo node failed !!! */
printf("UNDO of a node failed !!!/n");
break;
default:
printf("node finished execution with an illegal status !!!\n");
RF_PANIC();
break;
}
/*
* Enqueue node's succedents (antecedents if rollBackward) for
* execution.
*/
rf_PropagateResults(node, context);
}
/*
* User context or dag-exec-thread context:
* This is the first step in post-processing a newly-completed node.
* This routine is called by each node execution function to mark the node
* as complete and fire off any successors that have been enabled.
*/
int
rf_FinishNode(RF_DagNode_t *node, int context)
{
/* As far as I can tell, retcode is not used -wvcii. */
int retcode = RF_FALSE;
node->dagHdr->numNodesCompleted++;
rf_ProcessNode(node, context);
return (retcode);
}
/*
* User context:
* Submit dag for execution, return non-zero if we have to wait for completion.
* If and only if we return non-zero, we'll cause cbFunc to get invoked with
* cbArg when the DAG has completed.
*
* For now we always return 1. If the DAG does not cause any I/O, then the
* callback may get invoked before DispatchDAG returns. There's code in state
* 5 of ContinueRaidAccess to handle this.
*
* All we do here is fire the direct successors of the header node. The DAG
* execution thread does the rest of the dag processing.
*/
int
rf_DispatchDAG(RF_DagHeader_t *dag, void (*cbFunc) (void *), void *cbArg)
{
RF_Raid_t *raidPtr;
raidPtr = dag->raidPtr;
if (dag->tracerec) {
RF_ETIMER_START(dag->tracerec->timer);
}
if (rf_engineDebug || rf_validateDAGDebug) {
if (rf_ValidateDAG(dag))
RF_PANIC();
}
if (rf_engineDebug>1) {
printf("raid%d: Entering DispatchDAG\n", raidPtr->raidid);
}
raidPtr->dags_in_flight++; /*
* Debug only: blow off proper
* locking.
*/
dag->cbFunc = cbFunc;
dag->cbArg = cbArg;
dag->numNodesCompleted = 0;
dag->status = rf_enable;
rf_FireNodeArray(dag->numSuccedents, dag->succedents);
return (1);
}
/*
* Dedicated kernel thread:
* The thread that handles all DAG node firing.
* To minimize locking and unlocking, we grab a copy of the entire node queue
* and then set the node queue to NULL before doing any firing of nodes.
* This way we only have to release the lock once. Of course, it's probably
* rare that there's more than one node in the queue at any one time, but it
* sometimes happens.
*
* In the kernel, this thread runs at spl0 and is not swappable. I copied these
* characteristics from the aio_completion_thread.
*/
#ifdef RAID_AUTOCONFIG
void
rf_DAGExecutionThread_pre(RF_ThreadArg_t arg)
{
RF_Raid_t *raidPtr;
char raidname[16];
pid_t oldpid = lastpid;
raidPtr = (RF_Raid_t *) arg;
if (rf_engineDebug) {
printf("raid%d: Starting engine thread\n", raidPtr->raidid);
}
lastpid = RF_ENGINE_PID + raidPtr->raidid - 1;
snprintf(raidname, sizeof raidname, "raid%d", raidPtr->raidid);
if (RF_CREATE_THREAD(raidPtr->engine_thread, rf_DAGExecutionThread,
raidPtr, &raidname[0])) {
RF_ERRORMSG("RAIDFRAME: Unable to start engine thread\n");
return;
}
lastpid = oldpid;
if (rf_engineDebug) {
printf("raid%d: Engine thread started\n", raidPtr->raidid);
}
RF_THREADGROUP_STARTED(&raidPtr->engine_tg);
}
#endif /* RAID_AUTOCONFIG */
void
rf_DAGExecutionThread(RF_ThreadArg_t arg)
{
RF_DagNode_t *nd, *local_nq, *term_nq, *fire_nq;
RF_Raid_t *raidPtr;
int ks;
int s;
raidPtr = (RF_Raid_t *) arg;
while (!(&raidPtr->engine_tg)->created)
(void) tsleep((void *)&(&raidPtr->engine_tg)->created, PWAIT,
"raidinit", 0);
if (rf_engineDebug) {
printf("raid%d: Engine thread is running\n", raidPtr->raidid);
}
/* XXX What to put here ? XXX */
s = splbio();
RF_THREADGROUP_RUNNING(&raidPtr->engine_tg);
rf_hook_cookies[raidPtr->raidid] =
shutdownhook_establish(rf_shutdown_hook, (void *)raidPtr);
DO_LOCK(raidPtr);
while (!raidPtr->shutdown_engine) {
while (raidPtr->node_queue != NULL) {
local_nq = raidPtr->node_queue;
fire_nq = NULL;
term_nq = NULL;
raidPtr->node_queue = NULL;
DO_UNLOCK(raidPtr);
/* First, strip out the terminal nodes. */
while (local_nq) {
nd = local_nq;
local_nq = local_nq->next;
switch (nd->dagHdr->status) {
case rf_enable:
case rf_rollForward:
if (nd->numSuccedents == 0) {
/*
* End of the dag, add to
* callback list.
*/
nd->next = term_nq;
term_nq = nd;
} else {
/*
* Not the end, add to the
* fire queue.
*/
nd->next = fire_nq;
fire_nq = nd;
}
break;
case rf_rollBackward:
if (nd->numAntecedents == 0) {
/*
* End of the dag, add to the
* callback list.
*/
nd->next = term_nq;
term_nq = nd;
} else {
/*
* Not the end, add to the
* fire queue.
*/
nd->next = fire_nq;
fire_nq = nd;
}
break;
default:
RF_PANIC();
break;
}
}
/*
* Execute callback of dags which have reached the
* terminal node.
*/
while (term_nq) {
nd = term_nq;
term_nq = term_nq->next;
nd->next = NULL;
(nd->dagHdr->cbFunc) (nd->dagHdr->cbArg);
raidPtr->dags_in_flight--; /* Debug only. */
}
/* Fire remaining nodes. */
rf_FireNodeList(fire_nq);
DO_LOCK(raidPtr);
}
while (!raidPtr->shutdown_engine && raidPtr->node_queue == NULL)
DO_WAIT(raidPtr);
}
DO_UNLOCK(raidPtr);
if (rf_hook_cookies && rf_hook_cookies[raidPtr->raidid] != NULL) {
shutdownhook_disestablish(rf_hook_cookies[raidPtr->raidid]);
rf_hook_cookies[raidPtr->raidid] = NULL;
}
RF_THREADGROUP_DONE(&raidPtr->engine_tg);
splx(s);
kthread_exit(0);
}