File: [local] / sys / dev / usb / if_uath.c (download)
Revision 1.1.1.1 (vendor branch), Tue Mar 4 16:14:28 2008 UTC (16 years, 6 months ago) by nbrk
Branch: OPENBSD_4_2_BASE, MAIN
CVS Tags: jornada-partial-support-wip, HEAD Changes since 1.1: +0 -0 lines
Import of OpenBSD 4.2 release kernel tree with initial code to support
Jornada 720/728, StrongARM 1110-based handheld PC.
At this point kernel roots on NFS and boots into vfs_mountroot() and traps.
What is supported:
- glass console, Jornada framebuffer (jfb) works in 16bpp direct color mode
(needs some palette tweaks for non black/white/blue colors, i think)
- saic, SA11x0 interrupt controller (needs cleanup)
- sacom, SA11x0 UART (supported only as boot console for now)
- SA11x0 GPIO controller fully supported (but can't handle multiple interrupt
handlers on one gpio pin)
- sassp, SSP port on SA11x0 that attaches spibus
- Jornada microcontroller (jmcu) to control kbd, battery, etc throught
the SPI bus (wskbd attaches on jmcu, but not tested)
- tod functions seem work
- initial code for SA-1111 (chip companion) : this is TODO
Next important steps, i think:
- gpio and intc on sa1111
- pcmcia support for sa11x0 (and sa1111 help logic)
- REAL root on nfs when we have PCMCIA support (we may use any of supported pccard NICs)
- root on wd0! (using already supported PCMCIA-ATA)
|
/* $OpenBSD: if_uath.c,v 1.27 2007/07/18 18:10:31 damien Exp $ */
/*-
* Copyright (c) 2006
* Damien Bergamini <damien.bergamini@free.fr>
*
* Permission to use, copy, modify, and distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
/*-
* Driver for Atheros AR5005UG/AR5005UX chipsets.
* http://www.atheros.com/pt/bulletins/AR5005UGBulletin.pdf
* http://www.atheros.com/pt/bulletins/AR5005UXBulletin.pdf
*
* IMPORTANT NOTICE:
* This driver was written without any documentation or support from Atheros
* Communications. It is based on a black-box analysis of the Windows binary
* driver. It handles both pre and post-firmware devices.
*/
#include "bpfilter.h"
#include <sys/param.h>
#include <sys/sockio.h>
#include <sys/sysctl.h>
#include <sys/mbuf.h>
#include <sys/kernel.h>
#include <sys/socket.h>
#include <sys/systm.h>
#include <sys/malloc.h>
#include <sys/timeout.h>
#include <sys/conf.h>
#include <sys/device.h>
#include <machine/bus.h>
#include <machine/endian.h>
#include <machine/intr.h>
#if NBPFILTER > 0
#include <net/bpf.h>
#endif
#include <net/if.h>
#include <net/if_arp.h>
#include <net/if_dl.h>
#include <net/if_media.h>
#include <net/if_types.h>
#include <netinet/in.h>
#include <netinet/in_systm.h>
#include <netinet/in_var.h>
#include <netinet/if_ether.h>
#include <netinet/ip.h>
#include <net80211/ieee80211_var.h>
#include <net80211/ieee80211_radiotap.h>
#include <dev/rndvar.h>
#include <crypto/arc4.h>
#include <dev/usb/usb.h>
#include <dev/usb/usbdi.h>
#include <dev/usb/usbdivar.h> /* needs_reattach() */
#include <dev/usb/usbdi_util.h>
#include <dev/usb/usbdevs.h>
#include <dev/usb/if_uathreg.h>
#include <dev/usb/if_uathvar.h>
#ifdef USB_DEBUG
#define UATH_DEBUG
#endif
#ifdef UATH_DEBUG
#define DPRINTF(x) do { if (uath_debug) printf x; } while (0)
#define DPRINTFN(n, x) do { if (uath_debug >= (n)) printf x; } while (0)
int uath_debug = 1;
#else
#define DPRINTF(x)
#define DPRINTFN(n, x)
#endif
/*-
* Various supported device vendors/products.
* UB51: AR5005UG 802.11b/g, UB52: AR5005UX 802.11a/b/g
*/
#define UATH_DEV(v, p, f) \
{ { USB_VENDOR_##v, USB_PRODUCT_##v##_##p }, (f) }, \
{ { USB_VENDOR_##v, USB_PRODUCT_##v##_##p##_NF }, \
(f) | UATH_FLAG_PRE_FIRMWARE }
#define UATH_DEV_UG(v, p) UATH_DEV(v, p, 0)
#define UATH_DEV_UX(v, p) UATH_DEV(v, p, UATH_FLAG_ABG)
static const struct uath_type {
struct usb_devno dev;
unsigned int flags;
#define UATH_FLAG_PRE_FIRMWARE (1 << 0)
#define UATH_FLAG_ABG (1 << 1)
} uath_devs[] = {
UATH_DEV_UG(ATHEROS, AR5523),
UATH_DEV_UG(ATHEROS2, AR5523_1),
UATH_DEV_UG(ATHEROS2, AR5523_2),
UATH_DEV_UX(ATHEROS2, AR5523_3),
UATH_DEV_UG(CONCEPTRONIC, AR5523_1),
UATH_DEV_UX(CONCEPTRONIC, AR5523_2),
UATH_DEV_UX(DLINK, DWLAG122),
UATH_DEV_UX(DLINK, DWLAG132),
UATH_DEV_UG(DLINK, DWLG132),
UATH_DEV_UG(GIGASET, AR5523),
UATH_DEV_UG(GIGASET, SMCWUSBTG),
UATH_DEV_UG(GLOBALSUN, AR5523_1),
UATH_DEV_UX(GLOBALSUN, AR5523_2),
UATH_DEV_UX(NETGEAR, WG111U),
UATH_DEV_UG(NETGEAR3, WG111T),
UATH_DEV_UG(NETGEAR3, WPN111),
UATH_DEV_UG(UMEDIA, AR5523_1),
UATH_DEV_UX(UMEDIA, AR5523_2),
UATH_DEV_UG(UMEDIA, TEW444UBEU),
UATH_DEV_UG(WISTRONNEWEB, AR5523_1),
UATH_DEV_UX(WISTRONNEWEB, AR5523_2),
UATH_DEV_UG(ZCOM, AR5523)
};
#define uath_lookup(v, p) \
((const struct uath_type *)usb_lookup(uath_devs, v, p))
void uath_attachhook(void *);
int uath_open_pipes(struct uath_softc *);
void uath_close_pipes(struct uath_softc *);
int uath_alloc_tx_data_list(struct uath_softc *);
void uath_free_tx_data_list(struct uath_softc *);
int uath_alloc_rx_data_list(struct uath_softc *);
void uath_free_rx_data_list(struct uath_softc *);
void uath_free_rx_data(caddr_t, u_int, void *);
int uath_alloc_tx_cmd_list(struct uath_softc *);
void uath_free_tx_cmd_list(struct uath_softc *);
int uath_alloc_rx_cmd_list(struct uath_softc *);
void uath_free_rx_cmd_list(struct uath_softc *);
int uath_media_change(struct ifnet *);
void uath_stat(void *);
void uath_next_scan(void *);
void uath_task(void *);
int uath_newstate(struct ieee80211com *, enum ieee80211_state, int);
#ifdef UATH_DEBUG
void uath_dump_cmd(const uint8_t *, int, char);
#endif
int uath_cmd(struct uath_softc *, uint32_t, const void *, int, void *,
int);
int uath_cmd_write(struct uath_softc *, uint32_t, const void *, int, int);
int uath_cmd_read(struct uath_softc *, uint32_t, const void *, int, void *,
int);
int uath_write_reg(struct uath_softc *, uint32_t, uint32_t);
int uath_write_multi(struct uath_softc *, uint32_t, const void *, int);
int uath_read_reg(struct uath_softc *, uint32_t, uint32_t *);
int uath_read_eeprom(struct uath_softc *, uint32_t, void *);
void uath_cmd_rxeof(usbd_xfer_handle, usbd_private_handle, usbd_status);
void uath_data_rxeof(usbd_xfer_handle, usbd_private_handle, usbd_status);
void uath_data_txeof(usbd_xfer_handle, usbd_private_handle, usbd_status);
int uath_tx_null(struct uath_softc *);
int uath_tx_data(struct uath_softc *, struct mbuf *,
struct ieee80211_node *);
void uath_start(struct ifnet *);
void uath_watchdog(struct ifnet *);
int uath_ioctl(struct ifnet *, u_long, caddr_t);
int uath_query_eeprom(struct uath_softc *);
int uath_reset(struct uath_softc *);
int uath_reset_tx_queues(struct uath_softc *);
int uath_wme_init(struct uath_softc *);
int uath_set_chan(struct uath_softc *, struct ieee80211_channel *);
int uath_set_key(struct uath_softc *, const struct ieee80211_key *, int);
int uath_set_keys(struct uath_softc *);
int uath_set_rates(struct uath_softc *, const struct ieee80211_rateset *);
int uath_set_rxfilter(struct uath_softc *, uint32_t, uint32_t);
int uath_set_led(struct uath_softc *, int, int);
int uath_switch_channel(struct uath_softc *, struct ieee80211_channel *);
int uath_init(struct ifnet *);
void uath_stop(struct ifnet *, int);
int uath_loadfirmware(struct uath_softc *, const u_char *, int);
int uath_activate(struct device *, enum devact);
int uath_match(struct device *, void *, void *);
void uath_attach(struct device *, struct device *, void *);
int uath_detach(struct device *, int);
int uath_activate(struct device *, enum devact);
struct cfdriver uath_cd = {
NULL, "uath", DV_DULL
};
const struct cfattach uath_ca = {
sizeof(struct uath_softc),
uath_match,
uath_attach,
uath_detach,
uath_activate,
};
int
uath_match(struct device *parent, void *match, void *aux)
{
struct usb_attach_arg *uaa = aux;
if (uaa->iface != NULL)
return UMATCH_NONE;
return (uath_lookup(uaa->vendor, uaa->product) != NULL) ?
UMATCH_VENDOR_PRODUCT : UMATCH_NONE;
}
void
uath_attachhook(void *xsc)
{
struct uath_softc *sc = xsc;
u_char *fw;
size_t size;
int error;
if ((error = loadfirmware("uath-ar5523", &fw, &size)) != 0) {
printf("%s: could not read firmware (error=%d)\n",
sc->sc_dev.dv_xname, error);
return;
}
error = uath_loadfirmware(sc, fw, size);
free(fw, M_DEVBUF);
if (error == 0) {
usb_port_status_t status;
/*
* Hack alert: the device doesn't always gracefully detach
* from the bus after a firmware upload. We need to force
* a port reset and a re-exploration on the parent hub.
*/
usbd_reset_port(sc->sc_uhub, sc->sc_port, &status);
usb_needs_reattach(sc->sc_udev);
} else {
printf("%s: could not load firmware (error=%s)\n",
sc->sc_dev.dv_xname, usbd_errstr(error));
}
}
void
uath_attach(struct device *parent, struct device *self, void *aux)
{
struct uath_softc *sc = (struct uath_softc *)self;
struct usb_attach_arg *uaa = aux;
struct ieee80211com *ic = &sc->sc_ic;
struct ifnet *ifp = &ic->ic_if;
usbd_status error;
char *devinfop;
int i;
sc->sc_udev = uaa->device;
sc->sc_uhub = uaa->device->myhub;
sc->sc_port = uaa->port;
devinfop = usbd_devinfo_alloc(uaa->device, 0);
printf("\n%s: %s\n", sc->sc_dev.dv_xname, devinfop);
usbd_devinfo_free(devinfop);
sc->sc_flags = uath_lookup(uaa->vendor, uaa->product)->flags;
if (usbd_set_config_no(sc->sc_udev, UATH_CONFIG_NO, 0) != 0) {
printf("%s: could not set configuration no\n",
sc->sc_dev.dv_xname);
return;
}
/* get the first interface handle */
error = usbd_device2interface_handle(sc->sc_udev, UATH_IFACE_INDEX,
&sc->sc_iface);
if (error != 0) {
printf("%s: could not get interface handle\n",
sc->sc_dev.dv_xname);
return;
}
/*
* We must open the pipes early because they're used to upload the
* firmware (pre-firmware devices) or to send firmware commands.
*/
if (uath_open_pipes(sc) != 0) {
printf("%s: could not open pipes\n", sc->sc_dev.dv_xname);
return;
}
if (sc->sc_flags & UATH_FLAG_PRE_FIRMWARE) {
if (rootvp == NULL)
mountroothook_establish(uath_attachhook, sc);
else
uath_attachhook(sc);
return;
}
/*
* Only post-firmware devices here.
*/
usb_init_task(&sc->sc_task, uath_task, sc);
timeout_set(&sc->scan_to, uath_next_scan, sc);
timeout_set(&sc->stat_to, uath_stat, sc);
/*
* Allocate xfers for firmware commands.
*/
if (uath_alloc_tx_cmd_list(sc) != 0) {
printf("%s: could not allocate Tx command list\n",
sc->sc_dev.dv_xname);
goto fail1;
}
if (uath_alloc_rx_cmd_list(sc) != 0) {
printf("%s: could not allocate Rx command list\n",
sc->sc_dev.dv_xname);
goto fail2;
}
/*
* Queue Rx command xfers.
*/
for (i = 0; i < UATH_RX_CMD_LIST_COUNT; i++) {
struct uath_rx_cmd *cmd = &sc->rx_cmd[i];
usbd_setup_xfer(cmd->xfer, sc->cmd_rx_pipe, cmd, cmd->buf,
UATH_MAX_RXCMDSZ, USBD_SHORT_XFER_OK | USBD_NO_COPY,
USBD_NO_TIMEOUT, uath_cmd_rxeof);
error = usbd_transfer(cmd->xfer);
if (error != USBD_IN_PROGRESS && error != 0) {
printf("%s: could not queue Rx command xfer\n",
sc->sc_dev.dv_xname);
goto fail3;
}
}
/*
* We're now ready to send/receive firmware commands.
*/
if (uath_reset(sc) != 0) {
printf("%s: could not initialize adapter\n",
sc->sc_dev.dv_xname);
goto fail3;
}
if (uath_query_eeprom(sc) != 0) {
printf("%s: could not read EEPROM\n", sc->sc_dev.dv_xname);
goto fail3;
}
printf("%s: MAC/BBP AR5523, RF AR%c112, address %s\n",
sc->sc_dev.dv_xname, (sc->sc_flags & UATH_FLAG_ABG) ? '5': '2',
ether_sprintf(ic->ic_myaddr));
/*
* Allocate xfers for Tx/Rx data pipes.
*/
if (uath_alloc_tx_data_list(sc) != 0) {
printf("%s: could not allocate Tx data list\n",
sc->sc_dev.dv_xname);
goto fail3;
}
if (uath_alloc_rx_data_list(sc) != 0) {
printf("%s: could not allocate Rx data list\n",
sc->sc_dev.dv_xname);
goto fail4;
}
ic->ic_phytype = IEEE80211_T_OFDM; /* not only, but not used */
ic->ic_opmode = IEEE80211_M_STA; /* default to BSS mode */
ic->ic_state = IEEE80211_S_INIT;
/* set device capabilities */
ic->ic_caps =
IEEE80211_C_TXPMGT | /* tx power management */
IEEE80211_C_SHPREAMBLE | /* short preamble supported */
IEEE80211_C_SHSLOT | /* short slot time supported */
IEEE80211_C_WEP; /* h/w WEP */
/* set supported .11b and .11g rates */
ic->ic_sup_rates[IEEE80211_MODE_11B] = ieee80211_std_rateset_11b;
ic->ic_sup_rates[IEEE80211_MODE_11G] = ieee80211_std_rateset_11g;
/* set supported .11b and .11g channels (1 through 14) */
for (i = 1; i <= 14; i++) {
ic->ic_channels[i].ic_freq =
ieee80211_ieee2mhz(i, IEEE80211_CHAN_2GHZ);
ic->ic_channels[i].ic_flags =
IEEE80211_CHAN_CCK | IEEE80211_CHAN_OFDM |
IEEE80211_CHAN_DYN | IEEE80211_CHAN_2GHZ;
}
ifp->if_softc = sc;
ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
ifp->if_init = uath_init;
ifp->if_ioctl = uath_ioctl;
ifp->if_start = uath_start;
ifp->if_watchdog = uath_watchdog;
IFQ_SET_READY(&ifp->if_snd);
memcpy(ifp->if_xname, sc->sc_dev.dv_xname, IFNAMSIZ);
if_attach(ifp);
ieee80211_ifattach(ifp);
/* override state transition machine */
sc->sc_newstate = ic->ic_newstate;
ic->ic_newstate = uath_newstate;
ieee80211_media_init(ifp, uath_media_change, ieee80211_media_status);
#if NBPFILTER > 0
bpfattach(&sc->sc_drvbpf, ifp, DLT_IEEE802_11_RADIO,
sizeof (struct ieee80211_frame) + IEEE80211_RADIOTAP_HDRLEN);
sc->sc_rxtap_len = sizeof sc->sc_rxtapu;
sc->sc_rxtap.wr_ihdr.it_len = htole16(sc->sc_rxtap_len);
sc->sc_rxtap.wr_ihdr.it_present = htole32(UATH_RX_RADIOTAP_PRESENT);
sc->sc_txtap_len = sizeof sc->sc_txtapu;
sc->sc_txtap.wt_ihdr.it_len = htole16(sc->sc_txtap_len);
sc->sc_txtap.wt_ihdr.it_present = htole32(UATH_TX_RADIOTAP_PRESENT);
#endif
usbd_add_drv_event(USB_EVENT_DRIVER_ATTACH, sc->sc_udev,
&sc->sc_dev);
return;
fail4: uath_free_tx_data_list(sc);
fail3: uath_free_rx_cmd_list(sc);
fail2: uath_free_tx_cmd_list(sc);
fail1: uath_close_pipes(sc);
}
int
uath_detach(struct device *self, int flags)
{
struct uath_softc *sc = (struct uath_softc *)self;
struct ifnet *ifp = &sc->sc_ic.ic_if;
int s;
s = splnet();
if (sc->sc_flags & UATH_FLAG_PRE_FIRMWARE) {
uath_close_pipes(sc);
splx(s);
return 0;
}
/* post-firmware device */
usb_rem_task(sc->sc_udev, &sc->sc_task);
timeout_del(&sc->scan_to);
timeout_del(&sc->stat_to);
ieee80211_ifdetach(ifp); /* free all nodes */
if_detach(ifp);
sc->sc_dying = 1;
DPRINTF(("reclaiming %d references\n", sc->sc_refcnt));
while (sc->sc_refcnt > 0)
(void)tsleep(UATH_COND_NOREF(sc), 0, "uathdet", 0);
DPRINTF(("all references reclaimed\n"));
/* abort and free xfers */
uath_free_tx_data_list(sc);
uath_free_rx_data_list(sc);
uath_free_tx_cmd_list(sc);
uath_free_rx_cmd_list(sc);
/* close Tx/Rx pipes */
uath_close_pipes(sc);
splx(s);
usbd_add_drv_event(USB_EVENT_DRIVER_DETACH, sc->sc_udev,
&sc->sc_dev);
return 0;
}
int
uath_open_pipes(struct uath_softc *sc)
{
int error;
/*
* XXX pipes numbers are hardcoded because we don't have any way
* to distinguish the data pipes from the firmware command pipes
* (both are bulk pipes) using the endpoints descriptors.
*/
error = usbd_open_pipe(sc->sc_iface, 0x01, USBD_EXCLUSIVE_USE,
&sc->cmd_tx_pipe);
if (error != 0) {
printf("%s: could not open Tx command pipe: %s\n",
sc->sc_dev.dv_xname, usbd_errstr(error));
goto fail;
}
error = usbd_open_pipe(sc->sc_iface, 0x02, USBD_EXCLUSIVE_USE,
&sc->data_tx_pipe);
if (error != 0) {
printf("%s: could not open Tx data pipe: %s\n",
sc->sc_dev.dv_xname, usbd_errstr(error));
goto fail;
}
error = usbd_open_pipe(sc->sc_iface, 0x81, USBD_EXCLUSIVE_USE,
&sc->cmd_rx_pipe);
if (error != 0) {
printf("%s: could not open Rx command pipe: %s\n",
sc->sc_dev.dv_xname, usbd_errstr(error));
goto fail;
}
error = usbd_open_pipe(sc->sc_iface, 0x82, USBD_EXCLUSIVE_USE,
&sc->data_rx_pipe);
if (error != 0) {
printf("%s: could not open Rx data pipe: %s\n",
sc->sc_dev.dv_xname, usbd_errstr(error));
goto fail;
}
return 0;
fail: uath_close_pipes(sc);
return error;
}
void
uath_close_pipes(struct uath_softc *sc)
{
/* assumes no transfers are pending on the pipes */
if (sc->data_tx_pipe != NULL)
usbd_close_pipe(sc->data_tx_pipe);
if (sc->data_rx_pipe != NULL)
usbd_close_pipe(sc->data_rx_pipe);
if (sc->cmd_tx_pipe != NULL)
usbd_close_pipe(sc->cmd_tx_pipe);
if (sc->cmd_rx_pipe != NULL)
usbd_close_pipe(sc->cmd_rx_pipe);
}
int
uath_alloc_tx_data_list(struct uath_softc *sc)
{
int i, error;
for (i = 0; i < UATH_TX_DATA_LIST_COUNT; i++) {
struct uath_tx_data *data = &sc->tx_data[i];
data->sc = sc; /* backpointer for callbacks */
data->xfer = usbd_alloc_xfer(sc->sc_udev);
if (data->xfer == NULL) {
printf("%s: could not allocate xfer\n",
sc->sc_dev.dv_xname);
error = ENOMEM;
goto fail;
}
data->buf = usbd_alloc_buffer(data->xfer, UATH_MAX_TXBUFSZ);
if (data->buf == NULL) {
printf("%s: could not allocate xfer buffer\n",
sc->sc_dev.dv_xname);
error = ENOMEM;
goto fail;
}
}
return 0;
fail: uath_free_tx_data_list(sc);
return error;
}
void
uath_free_tx_data_list(struct uath_softc *sc)
{
int i;
/* make sure no transfers are pending */
usbd_abort_pipe(sc->data_tx_pipe);
for (i = 0; i < UATH_TX_DATA_LIST_COUNT; i++)
if (sc->tx_data[i].xfer != NULL)
usbd_free_xfer(sc->tx_data[i].xfer);
}
int
uath_alloc_rx_data_list(struct uath_softc *sc)
{
int i, error;
SLIST_INIT(&sc->rx_freelist);
for (i = 0; i < UATH_RX_DATA_POOL_COUNT; i++) {
struct uath_rx_data *data = &sc->rx_data[i];
data->sc = sc; /* backpointer for callbacks */
data->xfer = usbd_alloc_xfer(sc->sc_udev);
if (data->xfer == NULL) {
printf("%s: could not allocate xfer\n",
sc->sc_dev.dv_xname);
error = ENOMEM;
goto fail;
}
data->buf = usbd_alloc_buffer(data->xfer, sc->rxbufsz);
if (data->buf == NULL) {
printf("%s: could not allocate xfer buffer\n",
sc->sc_dev.dv_xname);
error = ENOMEM;
goto fail;
}
SLIST_INSERT_HEAD(&sc->rx_freelist, data, next);
}
return 0;
fail: uath_free_rx_data_list(sc);
return error;
}
void
uath_free_rx_data_list(struct uath_softc *sc)
{
int i;
/* make sure no transfers are pending */
usbd_abort_pipe(sc->data_rx_pipe);
for (i = 0; i < UATH_RX_DATA_POOL_COUNT; i++)
if (sc->rx_data[i].xfer != NULL)
usbd_free_xfer(sc->rx_data[i].xfer);
}
void
uath_free_rx_data(caddr_t buf, u_int size, void *arg)
{
struct uath_rx_data *data = arg;
struct uath_softc *sc = data->sc;
/* put the buffer back in the free list */
SLIST_INSERT_HEAD(&sc->rx_freelist, data, next);
/* release reference to softc */
if (--sc->sc_refcnt == 0 && sc->sc_dying)
wakeup(UATH_COND_NOREF(sc));
}
int
uath_alloc_tx_cmd_list(struct uath_softc *sc)
{
int i, error;
for (i = 0; i < UATH_TX_CMD_LIST_COUNT; i++) {
struct uath_tx_cmd *cmd = &sc->tx_cmd[i];
cmd->sc = sc; /* backpointer for callbacks */
cmd->xfer = usbd_alloc_xfer(sc->sc_udev);
if (cmd->xfer == NULL) {
printf("%s: could not allocate xfer\n",
sc->sc_dev.dv_xname);
error = ENOMEM;
goto fail;
}
cmd->buf = usbd_alloc_buffer(cmd->xfer, UATH_MAX_TXCMDSZ);
if (cmd->buf == NULL) {
printf("%s: could not allocate xfer buffer\n",
sc->sc_dev.dv_xname);
error = ENOMEM;
goto fail;
}
}
return 0;
fail: uath_free_tx_cmd_list(sc);
return error;
}
void
uath_free_tx_cmd_list(struct uath_softc *sc)
{
int i;
/* make sure no transfers are pending */
usbd_abort_pipe(sc->cmd_tx_pipe);
for (i = 0; i < UATH_TX_CMD_LIST_COUNT; i++)
if (sc->tx_cmd[i].xfer != NULL)
usbd_free_xfer(sc->tx_cmd[i].xfer);
}
int
uath_alloc_rx_cmd_list(struct uath_softc *sc)
{
int i, error;
for (i = 0; i < UATH_RX_CMD_LIST_COUNT; i++) {
struct uath_rx_cmd *cmd = &sc->rx_cmd[i];
cmd->sc = sc; /* backpointer for callbacks */
cmd->xfer = usbd_alloc_xfer(sc->sc_udev);
if (cmd->xfer == NULL) {
printf("%s: could not allocate xfer\n",
sc->sc_dev.dv_xname);
error = ENOMEM;
goto fail;
}
cmd->buf = usbd_alloc_buffer(cmd->xfer, UATH_MAX_RXCMDSZ);
if (cmd->buf == NULL) {
printf("%s: could not allocate xfer buffer\n",
sc->sc_dev.dv_xname);
error = ENOMEM;
goto fail;
}
}
return 0;
fail: uath_free_rx_cmd_list(sc);
return error;
}
void
uath_free_rx_cmd_list(struct uath_softc *sc)
{
int i;
/* make sure no transfers are pending */
usbd_abort_pipe(sc->cmd_rx_pipe);
for (i = 0; i < UATH_RX_CMD_LIST_COUNT; i++)
if (sc->rx_cmd[i].xfer != NULL)
usbd_free_xfer(sc->rx_cmd[i].xfer);
}
int
uath_media_change(struct ifnet *ifp)
{
int error;
error = ieee80211_media_change(ifp);
if (error != ENETRESET)
return error;
if ((ifp->if_flags & (IFF_UP | IFF_RUNNING)) == (IFF_UP | IFF_RUNNING))
uath_init(ifp);
return 0;
}
/*
* This function is called periodically (every second) when associated to
* query device statistics.
*/
void
uath_stat(void *arg)
{
struct uath_softc *sc = arg;
int error;
/*
* Send request for statistics asynchronously. The timer will be
* restarted when we'll get the stats notification.
*/
error = uath_cmd_write(sc, UATH_CMD_STATS, NULL, 0,
UATH_CMD_FLAG_ASYNC);
if (error != 0) {
printf("%s: could not query statistics (error=%d)\n",
sc->sc_dev.dv_xname, error);
}
}
/*
* This function is called periodically (every 250ms) during scanning to
* switch from one channel to another.
*/
void
uath_next_scan(void *arg)
{
struct uath_softc *sc = arg;
struct ieee80211com *ic = &sc->sc_ic;
struct ifnet *ifp = &ic->ic_if;
if (ic->ic_state == IEEE80211_S_SCAN)
ieee80211_next_scan(ifp);
}
void
uath_task(void *arg)
{
struct uath_softc *sc = arg;
struct ieee80211com *ic = &sc->sc_ic;
enum ieee80211_state ostate;
ostate = ic->ic_state;
switch (sc->sc_state) {
case IEEE80211_S_INIT:
if (ostate == IEEE80211_S_RUN) {
/* turn link and activity LEDs off */
(void)uath_set_led(sc, UATH_LED_LINK, 0);
(void)uath_set_led(sc, UATH_LED_ACTIVITY, 0);
}
break;
case IEEE80211_S_SCAN:
if (uath_switch_channel(sc, ic->ic_bss->ni_chan) != 0) {
printf("%s: could not switch channel\n",
sc->sc_dev.dv_xname);
break;
}
timeout_add(&sc->scan_to, hz / 4);
break;
case IEEE80211_S_AUTH:
{
struct ieee80211_node *ni = ic->ic_bss;
struct uath_cmd_bssid bssid;
struct uath_cmd_0b cmd0b;
struct uath_cmd_0c cmd0c;
if (uath_switch_channel(sc, ni->ni_chan) != 0) {
printf("%s: could not switch channel\n",
sc->sc_dev.dv_xname);
break;
}
(void)uath_cmd_write(sc, UATH_CMD_24, NULL, 0, 0);
bzero(&bssid, sizeof bssid);
bssid.len = htobe32(IEEE80211_ADDR_LEN);
IEEE80211_ADDR_COPY(bssid.bssid, ni->ni_bssid);
(void)uath_cmd_write(sc, UATH_CMD_SET_BSSID, &bssid,
sizeof bssid, 0);
bzero(&cmd0b, sizeof cmd0b);
cmd0b.code = htobe32(2);
cmd0b.size = htobe32(sizeof (cmd0b.data));
(void)uath_cmd_write(sc, UATH_CMD_0B, &cmd0b, sizeof cmd0b, 0);
bzero(&cmd0c, sizeof cmd0c);
cmd0c.magic1 = htobe32(2);
cmd0c.magic2 = htobe32(7);
cmd0c.magic3 = htobe32(1);
(void)uath_cmd_write(sc, UATH_CMD_0C, &cmd0c, sizeof cmd0c, 0);
if (uath_set_rates(sc, &ni->ni_rates) != 0) {
printf("%s: could not set negotiated rate set\n",
sc->sc_dev.dv_xname);
break;
}
break;
}
case IEEE80211_S_ASSOC:
break;
case IEEE80211_S_RUN:
{
struct ieee80211_node *ni = ic->ic_bss;
struct uath_cmd_bssid bssid;
struct uath_cmd_xled xled;
uint32_t val;
if (ic->ic_opmode == IEEE80211_M_MONITOR) {
/* make both LEDs blink while monitoring */
bzero(&xled, sizeof xled);
xled.which = htobe32(0);
xled.rate = htobe32(1);
xled.mode = htobe32(2);
(void)uath_cmd_write(sc, UATH_CMD_SET_XLED, &xled,
sizeof xled, 0);
break;
}
/*
* Tx rate is controlled by firmware, report the maximum
* negotiated rate in ifconfig output.
*/
ni->ni_txrate = ni->ni_rates.rs_nrates - 1;
val = htobe32(1);
(void)uath_cmd_write(sc, UATH_CMD_2E, &val, sizeof val, 0);
bzero(&bssid, sizeof bssid);
bssid.flags1 = htobe32(0xc004);
bssid.flags2 = htobe32(0x003b);
bssid.len = htobe32(IEEE80211_ADDR_LEN);
IEEE80211_ADDR_COPY(bssid.bssid, ni->ni_bssid);
(void)uath_cmd_write(sc, UATH_CMD_SET_BSSID, &bssid,
sizeof bssid, 0);
/* turn link LED on */
(void)uath_set_led(sc, UATH_LED_LINK, 1);
/* make activity LED blink */
bzero(&xled, sizeof xled);
xled.which = htobe32(1);
xled.rate = htobe32(1);
xled.mode = htobe32(2);
(void)uath_cmd_write(sc, UATH_CMD_SET_XLED, &xled, sizeof xled,
0);
/* set state to associated */
val = htobe32(1);
(void)uath_cmd_write(sc, UATH_CMD_SET_STATE, &val, sizeof val,
0);
/* start statistics timer */
timeout_add(&sc->stat_to, hz);
break;
}
}
sc->sc_newstate(ic, sc->sc_state, sc->sc_arg);
}
int
uath_newstate(struct ieee80211com *ic, enum ieee80211_state nstate, int arg)
{
struct uath_softc *sc = ic->ic_softc;
usb_rem_task(sc->sc_udev, &sc->sc_task);
timeout_del(&sc->scan_to);
timeout_del(&sc->stat_to);
/* do it in a process context */
sc->sc_state = nstate;
sc->sc_arg = arg;
usb_add_task(sc->sc_udev, &sc->sc_task);
return 0;
}
#ifdef UATH_DEBUG
void
uath_dump_cmd(const uint8_t *buf, int len, char prefix)
{
int i;
for (i = 0; i < len; i++) {
if ((i % 16) == 0)
printf("\n%c ", prefix);
else if ((i % 4) == 0)
printf(" ");
printf("%02x", buf[i]);
}
printf("\n");
}
#endif
/*
* Low-level function to send read or write commands to the firmware.
*/
int
uath_cmd(struct uath_softc *sc, uint32_t code, const void *idata, int ilen,
void *odata, int flags)
{
struct uath_cmd_hdr *hdr;
struct uath_tx_cmd *cmd;
uint16_t xferflags;
int s, xferlen, error;
/* grab a xfer */
cmd = &sc->tx_cmd[sc->cmd_idx];
/* always bulk-out a multiple of 4 bytes */
xferlen = (sizeof (struct uath_cmd_hdr) + ilen + 3) & ~3;
hdr = (struct uath_cmd_hdr *)cmd->buf;
bzero(hdr, sizeof (struct uath_cmd_hdr));
hdr->len = htobe32(xferlen);
hdr->code = htobe32(code);
hdr->priv = sc->cmd_idx; /* don't care about endianness */
hdr->magic = htobe32((flags & UATH_CMD_FLAG_MAGIC) ? 1 << 24 : 0);
bcopy(idata, (uint8_t *)(hdr + 1), ilen);
#ifdef UATH_DEBUG
if (uath_debug >= 5) {
printf("sending command code=0x%02x flags=0x%x index=%u",
code, flags, sc->cmd_idx);
uath_dump_cmd(cmd->buf, xferlen, '+');
}
#endif
xferflags = USBD_FORCE_SHORT_XFER | USBD_NO_COPY;
if (!(flags & UATH_CMD_FLAG_READ)) {
if (!(flags & UATH_CMD_FLAG_ASYNC))
xferflags |= USBD_SYNCHRONOUS;
} else
s = splusb();
cmd->odata = odata;
usbd_setup_xfer(cmd->xfer, sc->cmd_tx_pipe, cmd, cmd->buf, xferlen,
xferflags, UATH_CMD_TIMEOUT, NULL);
error = usbd_transfer(cmd->xfer);
if (error != USBD_IN_PROGRESS && error != 0) {
if (flags & UATH_CMD_FLAG_READ)
splx(s);
printf("%s: could not send command 0x%x (error=%s)\n",
sc->sc_dev.dv_xname, code, usbd_errstr(error));
return error;
}
sc->cmd_idx = (sc->cmd_idx + 1) % UATH_TX_CMD_LIST_COUNT;
if (!(flags & UATH_CMD_FLAG_READ))
return 0; /* write: don't wait for reply */
/* wait at most two seconds for command reply */
error = tsleep(cmd, PCATCH, "uathcmd", 2 * hz);
cmd->odata = NULL; /* in case answer is received too late */
splx(s);
if (error != 0) {
printf("%s: timeout waiting for command reply\n",
sc->sc_dev.dv_xname);
}
return error;
}
int
uath_cmd_write(struct uath_softc *sc, uint32_t code, const void *data, int len,
int flags)
{
flags &= ~UATH_CMD_FLAG_READ;
return uath_cmd(sc, code, data, len, NULL, flags);
}
int
uath_cmd_read(struct uath_softc *sc, uint32_t code, const void *idata,
int ilen, void *odata, int flags)
{
flags |= UATH_CMD_FLAG_READ;
return uath_cmd(sc, code, idata, ilen, odata, flags);
}
int
uath_write_reg(struct uath_softc *sc, uint32_t reg, uint32_t val)
{
struct uath_write_mac write;
int error;
write.reg = htobe32(reg);
write.len = htobe32(0); /* 0 = single write */
*(uint32_t *)write.data = htobe32(val);
error = uath_cmd_write(sc, UATH_CMD_WRITE_MAC, &write,
3 * sizeof (uint32_t), 0);
if (error != 0) {
printf("%s: could not write register 0x%02x\n",
sc->sc_dev.dv_xname, reg);
}
return error;
}
int
uath_write_multi(struct uath_softc *sc, uint32_t reg, const void *data,
int len)
{
struct uath_write_mac write;
int error;
write.reg = htobe32(reg);
write.len = htobe32(len);
bcopy(data, write.data, len);
/* properly handle the case where len is zero (reset) */
error = uath_cmd_write(sc, UATH_CMD_WRITE_MAC, &write,
(len == 0) ? sizeof (uint32_t) : 2 * sizeof (uint32_t) + len, 0);
if (error != 0) {
printf("%s: could not write %d bytes to register 0x%02x\n",
sc->sc_dev.dv_xname, len, reg);
}
return error;
}
int
uath_read_reg(struct uath_softc *sc, uint32_t reg, uint32_t *val)
{
struct uath_read_mac read;
int error;
reg = htobe32(reg);
error = uath_cmd_read(sc, UATH_CMD_READ_MAC, ®, sizeof reg, &read,
0);
if (error != 0) {
printf("%s: could not read register 0x%02x\n",
sc->sc_dev.dv_xname, betoh32(reg));
return error;
}
*val = betoh32(*(uint32_t *)read.data);
return error;
}
int
uath_read_eeprom(struct uath_softc *sc, uint32_t reg, void *odata)
{
struct uath_read_mac read;
int len, error;
reg = htobe32(reg);
error = uath_cmd_read(sc, UATH_CMD_READ_EEPROM, ®, sizeof reg,
&read, 0);
if (error != 0) {
printf("%s: could not read EEPROM offset 0x%02x\n",
sc->sc_dev.dv_xname, betoh32(reg));
return error;
}
len = betoh32(read.len);
bcopy(read.data, odata, (len == 0) ? sizeof (uint32_t) : len);
return error;
}
void
uath_cmd_rxeof(usbd_xfer_handle xfer, usbd_private_handle priv,
usbd_status status)
{
struct uath_rx_cmd *cmd = priv;
struct uath_softc *sc = cmd->sc;
struct uath_cmd_hdr *hdr;
if (status != USBD_NORMAL_COMPLETION) {
if (status == USBD_STALLED)
usbd_clear_endpoint_stall_async(sc->cmd_rx_pipe);
return;
}
hdr = (struct uath_cmd_hdr *)cmd->buf;
#ifdef UATH_DEBUG
if (uath_debug >= 5) {
printf("received command code=0x%x index=%u len=%u",
betoh32(hdr->code), hdr->priv, betoh32(hdr->len));
uath_dump_cmd(cmd->buf, betoh32(hdr->len), '-');
}
#endif
switch (betoh32(hdr->code) & 0xff) {
/* reply to a read command */
default:
{
struct uath_tx_cmd *txcmd = &sc->tx_cmd[hdr->priv];
if (txcmd->odata != NULL) {
/* copy answer into caller's supplied buffer */
bcopy((uint8_t *)(hdr + 1), txcmd->odata,
betoh32(hdr->len) - sizeof (struct uath_cmd_hdr));
}
wakeup(txcmd); /* wake up caller */
break;
}
/* spontaneous firmware notifications */
case UATH_NOTIF_READY:
DPRINTF(("received device ready notification\n"));
wakeup(UATH_COND_INIT(sc));
break;
case UATH_NOTIF_TX:
/* this notification is sent when UATH_TX_NOTIFY is set */
DPRINTF(("received Tx notification\n"));
break;
case UATH_NOTIF_STATS:
DPRINTFN(2, ("received device statistics\n"));
timeout_add(&sc->stat_to, hz);
break;
}
/* setup a new transfer */
usbd_setup_xfer(xfer, sc->cmd_rx_pipe, cmd, cmd->buf, UATH_MAX_RXCMDSZ,
USBD_SHORT_XFER_OK | USBD_NO_COPY, USBD_NO_TIMEOUT,
uath_cmd_rxeof);
(void)usbd_transfer(xfer);
}
void
uath_data_rxeof(usbd_xfer_handle xfer, usbd_private_handle priv,
usbd_status status)
{
struct uath_rx_data *data = priv;
struct uath_softc *sc = data->sc;
struct ieee80211com *ic = &sc->sc_ic;
struct ifnet *ifp = &ic->ic_if;
struct ieee80211_frame *wh;
struct ieee80211_node *ni;
struct uath_rx_data *ndata;
struct uath_rx_desc *desc;
struct mbuf *m;
uint32_t hdr;
int s, len;
if (status != USBD_NORMAL_COMPLETION) {
if (status == USBD_NOT_STARTED || status == USBD_CANCELLED)
return;
if (status == USBD_STALLED)
usbd_clear_endpoint_stall_async(sc->data_rx_pipe);
ifp->if_ierrors++;
return;
}
usbd_get_xfer_status(xfer, NULL, NULL, &len, NULL);
if (len < UATH_MIN_RXBUFSZ) {
DPRINTF(("wrong xfer size (len=%d)\n", len));
ifp->if_ierrors++;
goto skip;
}
hdr = betoh32(*(uint32_t *)data->buf);
/* Rx descriptor is located at the end, 32-bit aligned */
desc = (struct uath_rx_desc *)
(data->buf + len - sizeof (struct uath_rx_desc));
if (betoh32(desc->len) > sc->rxbufsz) {
DPRINTF(("bad descriptor (len=%d)\n", betoh32(desc->len)));
ifp->if_ierrors++;
goto skip;
}
/* there's probably a "bad CRC" flag somewhere in the descriptor.. */
MGETHDR(m, M_DONTWAIT, MT_DATA);
if (m == NULL) {
ifp->if_ierrors++;
goto skip;
}
/* grab a new Rx buffer */
ndata = SLIST_FIRST(&sc->rx_freelist);
if (ndata == NULL) {
printf("%s: could not allocate Rx buffer\n",
sc->sc_dev.dv_xname);
m_freem(m);
ifp->if_ierrors++;
goto skip;
}
SLIST_REMOVE_HEAD(&sc->rx_freelist, next);
MEXTADD(m, data->buf, sc->rxbufsz, 0, uath_free_rx_data, data);
/* finalize mbuf */
m->m_pkthdr.rcvif = ifp;
m->m_data = data->buf + sizeof (uint32_t);
m->m_pkthdr.len = m->m_len = betoh32(desc->len) -
sizeof (struct uath_rx_desc) - IEEE80211_CRC_LEN;
data = ndata;
wh = mtod(m, struct ieee80211_frame *);
if ((wh->i_fc[1] & IEEE80211_FC1_WEP) &&
ic->ic_opmode != IEEE80211_M_MONITOR) {
/*
* Hardware decrypts the frame itself but leaves the WEP bit
* set in the 802.11 header and doesn't remove the IV and CRC
* fields.
*/
wh->i_fc[1] &= ~IEEE80211_FC1_WEP;
ovbcopy(wh, (caddr_t)wh + IEEE80211_WEP_IVLEN +
IEEE80211_WEP_KIDLEN, sizeof (struct ieee80211_frame));
m_adj(m, IEEE80211_WEP_IVLEN + IEEE80211_WEP_KIDLEN);
m_adj(m, -IEEE80211_WEP_CRCLEN);
wh = mtod(m, struct ieee80211_frame *);
}
#if NBPFILTER > 0
/* there are a lot more fields in the Rx descriptor */
if (sc->sc_drvbpf != NULL) {
struct mbuf mb;
struct uath_rx_radiotap_header *tap = &sc->sc_rxtap;
tap->wr_flags = 0;
tap->wr_chan_freq = htole16(betoh32(desc->freq));
tap->wr_chan_flags = htole16(ic->ic_bss->ni_chan->ic_flags);
tap->wr_dbm_antsignal = (int8_t)betoh32(desc->rssi);
mb.m_data = (caddr_t)tap;
mb.m_len = sc->sc_rxtap_len;
mb.m_next = m;
mb.m_nextpkt = NULL;
mb.m_type = 0;
mb.m_flags = 0;
bpf_mtap(sc->sc_drvbpf, &mb, BPF_DIRECTION_IN);
}
#endif
s = splnet();
sc->sc_refcnt++;
ni = ieee80211_find_rxnode(ic, wh);
ieee80211_input(ifp, m, ni, (int)betoh32(desc->rssi), 0);
/* node is no longer needed */
ieee80211_release_node(ic, ni);
splx(s);
skip: /* setup a new transfer */
usbd_setup_xfer(data->xfer, sc->data_rx_pipe, data, data->buf,
sc->rxbufsz, USBD_SHORT_XFER_OK | USBD_NO_COPY, USBD_NO_TIMEOUT,
uath_data_rxeof);
(void)usbd_transfer(data->xfer);
}
int
uath_tx_null(struct uath_softc *sc)
{
struct uath_tx_data *data;
struct uath_tx_desc *desc;
data = &sc->tx_data[sc->data_idx];
data->ni = NULL;
*(uint32_t *)data->buf = UATH_MAKECTL(1, sizeof (struct uath_tx_desc));
desc = (struct uath_tx_desc *)(data->buf + sizeof (uint32_t));
bzero(desc, sizeof (struct uath_tx_desc));
desc->len = htobe32(sizeof (struct uath_tx_desc));
desc->type = htobe32(UATH_TX_NULL);
usbd_setup_xfer(data->xfer, sc->data_tx_pipe, data, data->buf,
sizeof (uint32_t) + sizeof (struct uath_tx_desc), USBD_NO_COPY |
USBD_FORCE_SHORT_XFER, UATH_DATA_TIMEOUT, NULL);
if (usbd_sync_transfer(data->xfer) != 0)
return EIO;
sc->data_idx = (sc->data_idx + 1) % UATH_TX_DATA_LIST_COUNT;
return uath_cmd_write(sc, UATH_CMD_0F, NULL, 0, UATH_CMD_FLAG_ASYNC);
}
void
uath_data_txeof(usbd_xfer_handle xfer, usbd_private_handle priv,
usbd_status status)
{
struct uath_tx_data *data = priv;
struct uath_softc *sc = data->sc;
struct ieee80211com *ic = &sc->sc_ic;
struct ifnet *ifp = &ic->ic_if;
int s;
if (status != USBD_NORMAL_COMPLETION) {
if (status == USBD_NOT_STARTED || status == USBD_CANCELLED)
return;
printf("%s: could not transmit buffer: %s\n",
sc->sc_dev.dv_xname, usbd_errstr(status));
if (status == USBD_STALLED)
usbd_clear_endpoint_stall_async(sc->data_tx_pipe);
ifp->if_oerrors++;
return;
}
s = splnet();
ieee80211_release_node(ic, data->ni);
data->ni = NULL;
sc->tx_queued--;
ifp->if_opackets++;
sc->sc_tx_timer = 0;
ifp->if_flags &= ~IFF_OACTIVE;
uath_start(ifp);
splx(s);
}
int
uath_tx_data(struct uath_softc *sc, struct mbuf *m0, struct ieee80211_node *ni)
{
struct ieee80211com *ic = &sc->sc_ic;
struct uath_tx_data *data;
struct uath_tx_desc *desc;
const struct ieee80211_frame *wh;
int paylen, totlen, xferlen, error;
data = &sc->tx_data[sc->data_idx];
desc = (struct uath_tx_desc *)(data->buf + sizeof (uint32_t));
data->ni = ni;
#if NBPFILTER > 0
if (sc->sc_drvbpf != NULL) {
struct mbuf mb;
struct uath_tx_radiotap_header *tap = &sc->sc_txtap;
tap->wt_flags = 0;
tap->wt_chan_freq = htole16(ic->ic_bss->ni_chan->ic_freq);
tap->wt_chan_flags = htole16(ic->ic_bss->ni_chan->ic_flags);
mb.m_data = (caddr_t)tap;
mb.m_len = sc->sc_txtap_len;
mb.m_next = m0;
mb.m_nextpkt = NULL;
mb.m_type = 0;
mb.m_flags = 0;
bpf_mtap(sc->sc_drvbpf, &mb, BPF_DIRECTION_OUT);
}
#endif
paylen = m0->m_pkthdr.len;
xferlen = sizeof (uint32_t) + sizeof (struct uath_tx_desc) + paylen;
wh = mtod(m0, struct ieee80211_frame *);
if (wh->i_fc[1] & IEEE80211_FC1_WEP) {
uint8_t *frm = (uint8_t *)(desc + 1);
uint32_t iv;
/* h/w WEP: it's up to the host to fill the IV field */
bcopy(wh, frm, sizeof (struct ieee80211_frame));
frm += sizeof (struct ieee80211_frame);
/* insert IV: code copied from net80211 */
iv = (ic->ic_iv != 0) ? ic->ic_iv : arc4random();
if (iv >= 0x03ff00 && (iv & 0xf8ff00) == 0x00ff00)
iv += 0x000100;
ic->ic_iv = iv + 1;
*frm++ = iv & 0xff;
*frm++ = (iv >> 8) & 0xff;
*frm++ = (iv >> 16) & 0xff;
*frm++ = ic->ic_wep_txkey << 6;
m_copydata(m0, sizeof (struct ieee80211_frame),
m0->m_pkthdr.len - sizeof (struct ieee80211_frame), frm);
paylen += IEEE80211_WEP_IVLEN + IEEE80211_WEP_KIDLEN;
xferlen += IEEE80211_WEP_IVLEN + IEEE80211_WEP_KIDLEN;
totlen = xferlen + IEEE80211_WEP_CRCLEN;
} else {
m_copydata(m0, 0, m0->m_pkthdr.len, (uint8_t *)(desc + 1));
totlen = xferlen;
}
/* fill Tx descriptor */
*(uint32_t *)data->buf = UATH_MAKECTL(1, xferlen - sizeof (uint32_t));
desc->len = htobe32(totlen);
desc->priv = sc->data_idx; /* don't care about endianness */
desc->paylen = htobe32(paylen);
desc->type = htobe32(UATH_TX_DATA);
desc->flags = htobe32(0);
if (IEEE80211_IS_MULTICAST(wh->i_addr1)) {
desc->dest = htobe32(UATH_ID_BROADCAST);
desc->magic = htobe32(3);
} else {
desc->dest = htobe32(UATH_ID_BSS);
desc->magic = htobe32(1);
}
m_freem(m0); /* mbuf is no longer needed */
#ifdef UATH_DEBUG
if (uath_debug >= 6) {
printf("sending frame index=%u len=%d xferlen=%d",
sc->data_idx, paylen, xferlen);
uath_dump_cmd(data->buf, xferlen, '+');
}
#endif
usbd_setup_xfer(data->xfer, sc->data_tx_pipe, data, data->buf, xferlen,
USBD_FORCE_SHORT_XFER | USBD_NO_COPY, UATH_DATA_TIMEOUT,
uath_data_txeof);
error = usbd_transfer(data->xfer);
if (error != USBD_IN_PROGRESS && error != 0) {
ic->ic_if.if_oerrors++;
return error;
}
sc->data_idx = (sc->data_idx + 1) % UATH_TX_DATA_LIST_COUNT;
sc->tx_queued++;
return 0;
}
void
uath_start(struct ifnet *ifp)
{
struct uath_softc *sc = ifp->if_softc;
struct ieee80211com *ic = &sc->sc_ic;
struct ieee80211_node *ni;
struct mbuf *m0;
/*
* net80211 may still try to send management frames even if the
* IFF_RUNNING flag is not set...
*/
if ((ifp->if_flags & (IFF_RUNNING | IFF_OACTIVE)) != IFF_RUNNING)
return;
for (;;) {
IF_POLL(&ic->ic_mgtq, m0);
if (m0 != NULL) {
if (sc->tx_queued >= UATH_TX_DATA_LIST_COUNT) {
ifp->if_flags |= IFF_OACTIVE;
break;
}
IF_DEQUEUE(&ic->ic_mgtq, m0);
ni = (struct ieee80211_node *)m0->m_pkthdr.rcvif;
m0->m_pkthdr.rcvif = NULL;
#if NBPFILTER > 0
if (ic->ic_rawbpf != NULL)
bpf_mtap(ic->ic_rawbpf, m0, BPF_DIRECTION_OUT);
#endif
if (uath_tx_data(sc, m0, ni) != 0)
break;
} else {
if (ic->ic_state != IEEE80211_S_RUN)
break;
IFQ_POLL(&ifp->if_snd, m0);
if (m0 == NULL)
break;
if (sc->tx_queued >= UATH_TX_DATA_LIST_COUNT) {
ifp->if_flags |= IFF_OACTIVE;
break;
}
IFQ_DEQUEUE(&ifp->if_snd, m0);
#if NBPFILTER > 0
if (ifp->if_bpf != NULL)
bpf_mtap(ifp->if_bpf, m0, BPF_DIRECTION_OUT);
#endif
m0 = ieee80211_encap(ifp, m0, &ni);
if (m0 == NULL)
continue;
#if NBPFILTER > 0
if (ic->ic_rawbpf != NULL)
bpf_mtap(ic->ic_rawbpf, m0, BPF_DIRECTION_OUT);
#endif
if (uath_tx_data(sc, m0, ni) != 0) {
if (ni != NULL)
ieee80211_release_node(ic, ni);
ifp->if_oerrors++;
break;
}
}
sc->sc_tx_timer = 5;
ifp->if_timer = 1;
}
}
void
uath_watchdog(struct ifnet *ifp)
{
struct uath_softc *sc = ifp->if_softc;
ifp->if_timer = 0;
if (sc->sc_tx_timer > 0) {
if (--sc->sc_tx_timer == 0) {
printf("%s: device timeout\n", sc->sc_dev.dv_xname);
/*uath_init(ifp); XXX needs a process context! */
ifp->if_oerrors++;
return;
}
ifp->if_timer = 1;
}
ieee80211_watchdog(ifp);
}
int
uath_ioctl(struct ifnet *ifp, u_long cmd, caddr_t data)
{
struct uath_softc *sc = ifp->if_softc;
struct ieee80211com *ic = &sc->sc_ic;
struct ifaddr *ifa;
struct ifreq *ifr;
int s, error = 0;
s = splnet();
switch (cmd) {
case SIOCSIFADDR:
ifa = (struct ifaddr *)data;
ifp->if_flags |= IFF_UP;
#ifdef INET
if (ifa->ifa_addr->sa_family == AF_INET)
arp_ifinit(&ic->ic_ac, ifa);
#endif
/* FALLTHROUGH */
case SIOCSIFFLAGS:
if (ifp->if_flags & IFF_UP) {
if (!(ifp->if_flags & IFF_RUNNING))
uath_init(ifp);
} else {
if (ifp->if_flags & IFF_RUNNING)
uath_stop(ifp, 1);
}
break;
case SIOCADDMULTI:
case SIOCDELMULTI:
ifr = (struct ifreq *)data;
error = (cmd == SIOCADDMULTI) ?
ether_addmulti(ifr, &ic->ic_ac) :
ether_delmulti(ifr, &ic->ic_ac);
if (error == ENETRESET)
error = 0;
break;
default:
error = ieee80211_ioctl(ifp, cmd, data);
}
if (error == ENETRESET) {
if ((ifp->if_flags & (IFF_UP | IFF_RUNNING)) ==
(IFF_UP | IFF_RUNNING))
uath_init(ifp);
error = 0;
}
splx(s);
return error;
}
int
uath_query_eeprom(struct uath_softc *sc)
{
uint32_t tmp;
int error;
/* retrieve MAC address */
error = uath_read_eeprom(sc, UATH_EEPROM_MACADDR, sc->sc_ic.ic_myaddr);
if (error != 0) {
printf("%s: could not read MAC address\n",
sc->sc_dev.dv_xname);
return error;
}
/* retrieve the maximum frame size that the hardware can receive */
error = uath_read_eeprom(sc, UATH_EEPROM_RXBUFSZ, &tmp);
if (error != 0) {
printf("%s: could not read maximum Rx buffer size\n",
sc->sc_dev.dv_xname);
return error;
}
sc->rxbufsz = betoh32(tmp) & 0xfff;
DPRINTF(("maximum Rx buffer size %d\n", sc->rxbufsz));
return 0;
}
int
uath_reset(struct uath_softc *sc)
{
struct uath_cmd_setup setup;
uint32_t reg, val;
int s, error;
/* init device with some voodoo incantations.. */
setup.magic1 = htobe32(1);
setup.magic2 = htobe32(5);
setup.magic3 = htobe32(200);
setup.magic4 = htobe32(27);
s = splusb();
error = uath_cmd_write(sc, UATH_CMD_SETUP, &setup, sizeof setup,
UATH_CMD_FLAG_ASYNC);
/* ..and wait until firmware notifies us that it is ready */
if (error == 0)
error = tsleep(UATH_COND_INIT(sc), PCATCH, "uathinit", 5 * hz);
splx(s);
if (error != 0)
return error;
/* read PHY registers */
for (reg = 0x09; reg <= 0x24; reg++) {
if (reg == 0x0b || reg == 0x0c)
continue;
DELAY(100);
if ((error = uath_read_reg(sc, reg, &val)) != 0)
return error;
DPRINTFN(2, ("reg 0x%02x=0x%08x\n", reg, val));
}
return error;
}
int
uath_reset_tx_queues(struct uath_softc *sc)
{
int ac, error;
for (ac = 0; ac < 4; ac++) {
const uint32_t qid = htobe32(UATH_AC_TO_QID(ac));
DPRINTF(("resetting Tx queue %d\n", UATH_AC_TO_QID(ac)));
error = uath_cmd_write(sc, UATH_CMD_RESET_QUEUE, &qid,
sizeof qid, 0);
if (error != 0)
break;
}
return error;
}
int
uath_wme_init(struct uath_softc *sc)
{
struct uath_qinfo qinfo;
int ac, error;
static const struct uath_wme_settings uath_wme_11g[4] = {
{ 7, 4, 10, 0, 0 }, /* Background */
{ 3, 4, 10, 0, 0 }, /* Best-Effort */
{ 3, 3, 4, 26, 0 }, /* Video */
{ 2, 2, 3, 47, 0 } /* Voice */
};
bzero(&qinfo, sizeof qinfo);
qinfo.size = htobe32(32);
qinfo.magic1 = htobe32(1); /* XXX ack policy? */
qinfo.magic2 = htobe32(1);
for (ac = 0; ac < 4; ac++) {
qinfo.qid = htobe32(UATH_AC_TO_QID(ac));
qinfo.ac = htobe32(ac);
qinfo.aifsn = htobe32(uath_wme_11g[ac].aifsn);
qinfo.logcwmin = htobe32(uath_wme_11g[ac].logcwmin);
qinfo.logcwmax = htobe32(uath_wme_11g[ac].logcwmax);
qinfo.txop = htobe32(UATH_TXOP_TO_US(
uath_wme_11g[ac].txop));
qinfo.acm = htobe32(uath_wme_11g[ac].acm);
DPRINTF(("setting up Tx queue %d\n", UATH_AC_TO_QID(ac)));
error = uath_cmd_write(sc, UATH_CMD_SET_QUEUE, &qinfo,
sizeof qinfo, 0);
if (error != 0)
break;
}
return error;
}
int
uath_set_chan(struct uath_softc *sc, struct ieee80211_channel *c)
{
struct uath_set_chan chan;
bzero(&chan, sizeof chan);
chan.flags = htobe32(0x1400);
chan.freq = htobe32(c->ic_freq);
chan.magic1 = htobe32(20);
chan.magic2 = htobe32(50);
chan.magic3 = htobe32(1);
DPRINTF(("switching to channel %d\n",
ieee80211_chan2ieee(&sc->sc_ic, c)));
return uath_cmd_write(sc, UATH_CMD_SET_CHAN, &chan, sizeof chan, 0);
}
int
uath_set_key(struct uath_softc *sc, const struct ieee80211_key *k, int index)
{
struct uath_cmd_crypto crypto;
int i;
bzero(&crypto, sizeof crypto);
crypto.keyidx = htobe32(index);
crypto.magic1 = htobe32(1);
crypto.size = htobe32(368);
crypto.mask = htobe32(0xffff);
crypto.flags = htobe32(0x80000068);
if (index != UATH_DEFAULT_KEY)
crypto.flags |= htobe32(index << 16);
memset(crypto.magic2, 0xff, sizeof crypto.magic2);
/*
* Each byte of the key must be XOR'ed with 10101010 before being
* transmitted to the firmware.
*/
for (i = 0; i < k->k_len; i++)
crypto.key[i] = k->k_key[i] ^ 0xaa;
DPRINTF(("setting crypto key index=%d len=%d\n", index, k->k_len));
return uath_cmd_write(sc, UATH_CMD_CRYPTO, &crypto, sizeof crypto, 0);
}
int
uath_set_keys(struct uath_softc *sc)
{
const struct ieee80211com *ic = &sc->sc_ic;
int i, error;
for (i = 0; i < IEEE80211_WEP_NKID; i++) {
const struct ieee80211_key *k = &ic->ic_nw_keys[i];
if (k->k_len > 0 && (error = uath_set_key(sc, k, i)) != 0)
return error;
}
return uath_set_key(sc, &ic->ic_nw_keys[ic->ic_wep_txkey],
UATH_DEFAULT_KEY);
}
int
uath_set_rates(struct uath_softc *sc, const struct ieee80211_rateset *rs)
{
struct uath_cmd_rates rates;
bzero(&rates, sizeof rates);
rates.magic1 = htobe32(0x02);
rates.size = htobe32(1 + sizeof rates.rates);
rates.nrates = rs->rs_nrates;
bcopy(rs->rs_rates, rates.rates, rs->rs_nrates);
DPRINTF(("setting supported rates nrates=%d\n", rs->rs_nrates));
return uath_cmd_write(sc, UATH_CMD_SET_RATES, &rates, sizeof rates, 0);
}
int
uath_set_rxfilter(struct uath_softc *sc, uint32_t filter, uint32_t flags)
{
struct uath_cmd_filter rxfilter;
rxfilter.filter = htobe32(filter);
rxfilter.flags = htobe32(flags);
DPRINTF(("setting Rx filter=0x%x flags=0x%x\n", filter, flags));
return uath_cmd_write(sc, UATH_CMD_SET_FILTER, &rxfilter,
sizeof rxfilter, 0);
}
int
uath_set_led(struct uath_softc *sc, int which, int on)
{
struct uath_cmd_led led;
led.which = htobe32(which);
led.state = htobe32(on ? UATH_LED_ON : UATH_LED_OFF);
DPRINTFN(2, ("switching %s led %s\n",
(which == UATH_LED_LINK) ? "link" : "activity",
on ? "on" : "off"));
return uath_cmd_write(sc, UATH_CMD_SET_LED, &led, sizeof led, 0);
}
int
uath_switch_channel(struct uath_softc *sc, struct ieee80211_channel *c)
{
uint32_t val;
int error;
/* set radio frequency */
if ((error = uath_set_chan(sc, c)) != 0) {
printf("%s: could not set channel\n", sc->sc_dev.dv_xname);
return error;
}
/* reset Tx rings */
if ((error = uath_reset_tx_queues(sc)) != 0) {
printf("%s: could not reset Tx queues\n",
sc->sc_dev.dv_xname);
return error;
}
/* set Tx rings WME properties */
if ((error = uath_wme_init(sc)) != 0) {
printf("%s: could not init Tx queues\n",
sc->sc_dev.dv_xname);
return error;
}
val = htobe32(0);
error = uath_cmd_write(sc, UATH_CMD_SET_STATE, &val, sizeof val, 0);
if (error != 0) {
printf("%s: could not set state\n", sc->sc_dev.dv_xname);
return error;
}
return uath_tx_null(sc);
}
int
uath_init(struct ifnet *ifp)
{
struct uath_softc *sc = ifp->if_softc;
struct ieee80211com *ic = &sc->sc_ic;
struct uath_cmd_31 cmd31;
uint32_t val;
int i, error;
/* reset data and command rings */
sc->tx_queued = sc->data_idx = sc->cmd_idx = 0;
val = htobe32(0);
(void)uath_cmd_write(sc, UATH_CMD_02, &val, sizeof val, 0);
/* set MAC address */
IEEE80211_ADDR_COPY(ic->ic_myaddr, LLADDR(ifp->if_sadl));
(void)uath_write_multi(sc, 0x13, ic->ic_myaddr, IEEE80211_ADDR_LEN);
(void)uath_write_reg(sc, 0x02, 0x00000001);
(void)uath_write_reg(sc, 0x0e, 0x0000003f);
(void)uath_write_reg(sc, 0x10, 0x00000001);
(void)uath_write_reg(sc, 0x06, 0x0000001e);
/*
* Queue Rx data xfers.
*/
for (i = 0; i < UATH_RX_DATA_LIST_COUNT; i++) {
struct uath_rx_data *data = SLIST_FIRST(&sc->rx_freelist);
usbd_setup_xfer(data->xfer, sc->data_rx_pipe, data, data->buf,
sc->rxbufsz, USBD_SHORT_XFER_OK | USBD_NO_COPY,
USBD_NO_TIMEOUT, uath_data_rxeof);
error = usbd_transfer(data->xfer);
if (error != USBD_IN_PROGRESS && error != 0) {
printf("%s: could not queue Rx transfer\n",
sc->sc_dev.dv_xname);
goto fail;
}
SLIST_REMOVE_HEAD(&sc->rx_freelist, next);
}
error = uath_cmd_read(sc, UATH_CMD_07, 0, NULL, &val,
UATH_CMD_FLAG_MAGIC);
if (error != 0) {
printf("%s: could not send read command 07h\n",
sc->sc_dev.dv_xname);
goto fail;
}
DPRINTF(("command 07h return code: %x\n", betoh32(val)));
/* set default channel */
ic->ic_bss->ni_chan = ic->ic_ibss_chan;
if ((error = uath_set_chan(sc, ic->ic_bss->ni_chan)) != 0) {
printf("%s: could not set channel\n", sc->sc_dev.dv_xname);
goto fail;
}
if ((error = uath_wme_init(sc)) != 0) {
printf("%s: could not setup WME parameters\n",
sc->sc_dev.dv_xname);
goto fail;
}
/* init MAC registers */
(void)uath_write_reg(sc, 0x19, 0x00000000);
(void)uath_write_reg(sc, 0x1a, 0x0000003c);
(void)uath_write_reg(sc, 0x1b, 0x0000003c);
(void)uath_write_reg(sc, 0x1c, 0x00000000);
(void)uath_write_reg(sc, 0x1e, 0x00000000);
(void)uath_write_reg(sc, 0x1f, 0x00000003);
(void)uath_write_reg(sc, 0x0c, 0x00000000);
(void)uath_write_reg(sc, 0x0f, 0x00000002);
(void)uath_write_reg(sc, 0x0a, 0x00000007); /* XXX retry? */
(void)uath_write_reg(sc, 0x09, ic->ic_rtsthreshold);
val = htobe32(4);
(void)uath_cmd_write(sc, UATH_CMD_27, &val, sizeof val, 0);
(void)uath_cmd_write(sc, UATH_CMD_27, &val, sizeof val, 0);
(void)uath_cmd_write(sc, UATH_CMD_1B, NULL, 0, 0);
if ((error = uath_set_keys(sc)) != 0) {
printf("%s: could not set crypto keys\n",
sc->sc_dev.dv_xname);
goto fail;
}
/* enable Rx */
(void)uath_set_rxfilter(sc, 0x0000, 4);
(void)uath_set_rxfilter(sc, 0x0817, 1);
cmd31.magic1 = htobe32(0xffffffff);
cmd31.magic2 = htobe32(0xffffffff);
(void)uath_cmd_write(sc, UATH_CMD_31, &cmd31, sizeof cmd31, 0);
ifp->if_flags &= ~IFF_OACTIVE;
ifp->if_flags |= IFF_RUNNING;
if (ic->ic_opmode == IEEE80211_M_MONITOR)
ieee80211_new_state(ic, IEEE80211_S_RUN, -1);
else
ieee80211_new_state(ic, IEEE80211_S_SCAN, -1);
return 0;
fail: uath_stop(ifp, 1);
return error;
}
void
uath_stop(struct ifnet *ifp, int disable)
{
struct uath_softc *sc = ifp->if_softc;
struct ieee80211com *ic = &sc->sc_ic;
uint32_t val;
int s;
s = splusb();
sc->sc_tx_timer = 0;
ifp->if_timer = 0;
ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE);
ieee80211_new_state(ic, IEEE80211_S_INIT, -1); /* free all nodes */
val = htobe32(0);
(void)uath_cmd_write(sc, UATH_CMD_SET_STATE, &val, sizeof val, 0);
(void)uath_cmd_write(sc, UATH_CMD_RESET, NULL, 0, 0);
val = htobe32(0);
(void)uath_cmd_write(sc, UATH_CMD_15, &val, sizeof val, 0);
#if 0
(void)uath_cmd_read(sc, UATH_CMD_SHUTDOWN, NULL, 0, NULL,
UATH_CMD_FLAG_MAGIC);
#endif
/* abort any pending transfers */
usbd_abort_pipe(sc->data_tx_pipe);
usbd_abort_pipe(sc->data_rx_pipe);
usbd_abort_pipe(sc->cmd_tx_pipe);
splx(s);
}
/*
* Load the MIPS R4000 microcode into the device. Once the image is loaded,
* the device will detach itself from the bus and reattach later with a new
* product Id (a la ezusb). XXX this could also be implemented in userland
* through /dev/ugen.
*/
int
uath_loadfirmware(struct uath_softc *sc, const u_char *fw, int len)
{
usbd_xfer_handle ctlxfer, txxfer, rxxfer;
struct uath_fwblock *txblock, *rxblock;
uint8_t *txdata;
int error = 0;
if ((ctlxfer = usbd_alloc_xfer(sc->sc_udev)) == NULL) {
printf("%s: could not allocate Tx control xfer\n",
sc->sc_dev.dv_xname);
error = USBD_NOMEM;
goto fail1;
}
txblock = usbd_alloc_buffer(ctlxfer, sizeof (struct uath_fwblock));
if (txblock == NULL) {
printf("%s: could not allocate Tx control block\n",
sc->sc_dev.dv_xname);
error = USBD_NOMEM;
goto fail2;
}
if ((txxfer = usbd_alloc_xfer(sc->sc_udev)) == NULL) {
printf("%s: could not allocate Tx xfer\n",
sc->sc_dev.dv_xname);
error = USBD_NOMEM;
goto fail2;
}
txdata = usbd_alloc_buffer(txxfer, UATH_MAX_FWBLOCK_SIZE);
if (txdata == NULL) {
printf("%s: could not allocate Tx buffer\n",
sc->sc_dev.dv_xname);
error = USBD_NOMEM;
goto fail3;
}
if ((rxxfer = usbd_alloc_xfer(sc->sc_udev)) == NULL) {
printf("%s: could not allocate Rx control xfer\n",
sc->sc_dev.dv_xname);
error = USBD_NOMEM;
goto fail3;
}
rxblock = usbd_alloc_buffer(rxxfer, sizeof (struct uath_fwblock));
if (rxblock == NULL) {
printf("%s: could not allocate Rx control block\n",
sc->sc_dev.dv_xname);
error = USBD_NOMEM;
goto fail4;
}
bzero(txblock, sizeof (struct uath_fwblock));
txblock->flags = htobe32(UATH_WRITE_BLOCK);
txblock->total = htobe32(len);
while (len > 0) {
int mlen = min(len, UATH_MAX_FWBLOCK_SIZE);
txblock->remain = htobe32(len - mlen);
txblock->len = htobe32(mlen);
DPRINTF(("sending firmware block: %d bytes remaining\n",
len - mlen));
/* send firmware block meta-data */
usbd_setup_xfer(ctlxfer, sc->cmd_tx_pipe, sc, txblock,
sizeof (struct uath_fwblock), USBD_NO_COPY,
UATH_CMD_TIMEOUT, NULL);
if ((error = usbd_sync_transfer(ctlxfer)) != 0) {
printf("%s: could not send firmware block info\n",
sc->sc_dev.dv_xname);
break;
}
/* send firmware block data */
bcopy(fw, txdata, mlen);
usbd_setup_xfer(txxfer, sc->data_tx_pipe, sc, txdata, mlen,
USBD_NO_COPY, UATH_DATA_TIMEOUT, NULL);
if ((error = usbd_sync_transfer(txxfer)) != 0) {
printf("%s: could not send firmware block data\n",
sc->sc_dev.dv_xname);
break;
}
/* wait for ack from firmware */
usbd_setup_xfer(rxxfer, sc->cmd_rx_pipe, sc, rxblock,
sizeof (struct uath_fwblock), USBD_SHORT_XFER_OK |
USBD_NO_COPY, UATH_CMD_TIMEOUT, NULL);
if ((error = usbd_sync_transfer(rxxfer)) != 0) {
printf("%s: could not read firmware answer\n",
sc->sc_dev.dv_xname);
break;
}
DPRINTFN(2, ("rxblock flags=0x%x total=%d\n",
betoh32(rxblock->flags), betoh32(rxblock->rxtotal)));
fw += mlen;
len -= mlen;
}
fail4: usbd_free_xfer(rxxfer);
fail3: usbd_free_xfer(txxfer);
fail2: usbd_free_xfer(ctlxfer);
fail1: return error;
}
int
uath_activate(struct device *self, enum devact act)
{
switch (act) {
case DVACT_ACTIVATE:
break;
case DVACT_DEACTIVATE:
break;
}
return 0;
}