File: [local] / sys / dev / usb / uhub.c (download)
Revision 1.1.1.1 (vendor branch), Tue Mar 4 16:14:26 2008 UTC (16 years, 6 months ago) by nbrk
Branch: OPENBSD_4_2_BASE, MAIN
CVS Tags: jornada-partial-support-wip, HEAD Changes since 1.1: +0 -0 lines
Import of OpenBSD 4.2 release kernel tree with initial code to support
Jornada 720/728, StrongARM 1110-based handheld PC.
At this point kernel roots on NFS and boots into vfs_mountroot() and traps.
What is supported:
- glass console, Jornada framebuffer (jfb) works in 16bpp direct color mode
(needs some palette tweaks for non black/white/blue colors, i think)
- saic, SA11x0 interrupt controller (needs cleanup)
- sacom, SA11x0 UART (supported only as boot console for now)
- SA11x0 GPIO controller fully supported (but can't handle multiple interrupt
handlers on one gpio pin)
- sassp, SSP port on SA11x0 that attaches spibus
- Jornada microcontroller (jmcu) to control kbd, battery, etc throught
the SPI bus (wskbd attaches on jmcu, but not tested)
- tod functions seem work
- initial code for SA-1111 (chip companion) : this is TODO
Next important steps, i think:
- gpio and intc on sa1111
- pcmcia support for sa11x0 (and sa1111 help logic)
- REAL root on nfs when we have PCMCIA support (we may use any of supported pccard NICs)
- root on wd0! (using already supported PCMCIA-ATA)
|
/* $OpenBSD: uhub.c,v 1.47 2007/06/14 10:11:16 mbalmer Exp $ */
/* $NetBSD: uhub.c,v 1.64 2003/02/08 03:32:51 ichiro Exp $ */
/* $FreeBSD: src/sys/dev/usb/uhub.c,v 1.18 1999/11/17 22:33:43 n_hibma Exp $ */
/*
* Copyright (c) 1998 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Lennart Augustsson (lennart@augustsson.net) at
* Carlstedt Research & Technology.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the NetBSD
* Foundation, Inc. and its contributors.
* 4. Neither the name of The NetBSD Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/*
* USB spec: http://www.usb.org/developers/docs/usbspec.zip
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/malloc.h>
#include <sys/device.h>
#include <sys/proc.h>
#include <machine/bus.h>
#include <dev/usb/usb.h>
#include <dev/usb/usbdi.h>
#include <dev/usb/usbdi_util.h>
#include <dev/usb/usbdivar.h>
#define UHUB_INTR_INTERVAL 255 /* ms */
#ifdef UHUB_DEBUG
#define DPRINTF(x) do { if (uhubdebug) printf x; } while (0)
#define DPRINTFN(n,x) do { if (uhubdebug>(n)) printf x; } while (0)
int uhubdebug = 0;
#else
#define DPRINTF(x)
#define DPRINTFN(n,x)
#endif
struct uhub_softc {
struct device sc_dev; /* base device */
usbd_device_handle sc_hub; /* USB device */
usbd_pipe_handle sc_ipipe; /* interrupt pipe */
u_int8_t sc_status[1]; /* XXX more ports */
u_char sc_running;
};
#define UHUB_PROTO(sc) ((sc)->sc_hub->ddesc.bDeviceProtocol)
#define UHUB_IS_HIGH_SPEED(sc) (UHUB_PROTO(sc) != UDPROTO_FSHUB)
#define UHUB_IS_SINGLE_TT(sc) (UHUB_PROTO(sc) == UDPROTO_HSHUBSTT)
usbd_status uhub_explore(usbd_device_handle hub);
void uhub_intr(usbd_xfer_handle, usbd_private_handle,usbd_status);
/*
* We need two attachment points:
* hub to usb and hub to hub
* Every other driver only connects to hubs
*/
int uhub_match(struct device *, void *, void *);
void uhub_attach(struct device *, struct device *, void *);
int uhub_detach(struct device *, int);
int uhub_activate(struct device *, enum devact);
struct cfdriver uhub_cd = {
NULL, "uhub", DV_DULL
};
const struct cfattach uhub_ca = {
sizeof(struct uhub_softc),
uhub_match,
uhub_attach,
uhub_detach,
uhub_activate,
};
struct cfattach uhub_uhub_ca = {
sizeof(struct uhub_softc), uhub_match, uhub_attach,
uhub_detach, uhub_activate
};
int
uhub_match(struct device *parent, void *match, void *aux)
{
struct usb_attach_arg *uaa = aux;
usb_device_descriptor_t *dd = usbd_get_device_descriptor(uaa->device);
DPRINTFN(5,("uhub_match, dd=%p\n", dd));
/*
* The subclass for hubs seems to be 0 for some and 1 for others,
* so we just ignore the subclass.
*/
if (uaa->iface == NULL && dd->bDeviceClass == UDCLASS_HUB)
return (UMATCH_DEVCLASS_DEVSUBCLASS);
return (UMATCH_NONE);
}
void
uhub_attach(struct device *parent, struct device *self, void *aux)
{
struct uhub_softc *sc = (struct uhub_softc *)self;
struct usb_attach_arg *uaa = aux;
usbd_device_handle dev = uaa->device;
char *devinfop;
usbd_status err;
struct usbd_hub *hub = NULL;
usb_device_request_t req;
usb_hub_descriptor_t hubdesc;
int p, port, nports, nremov, pwrdly;
usbd_interface_handle iface;
usb_endpoint_descriptor_t *ed;
struct usbd_tt *tts = NULL;
DPRINTFN(1,("uhub_attach\n"));
sc->sc_hub = dev;
devinfop = usbd_devinfo_alloc(dev, 0);
printf(": %s\n", devinfop);
usbd_devinfo_free(devinfop);
err = usbd_set_config_index(dev, 0, 1);
if (err) {
DPRINTF(("%s: configuration failed, error=%s\n",
sc->sc_dev.dv_xname, usbd_errstr(err)));
return;
}
if (dev->depth > USB_HUB_MAX_DEPTH) {
printf("%s: hub depth (%d) exceeded, hub ignored\n",
sc->sc_dev.dv_xname, USB_HUB_MAX_DEPTH);
return;
}
/* Get hub descriptor. */
req.bmRequestType = UT_READ_CLASS_DEVICE;
req.bRequest = UR_GET_DESCRIPTOR;
USETW2(req.wValue, UDESC_HUB, 0);
USETW(req.wIndex, 0);
USETW(req.wLength, USB_HUB_DESCRIPTOR_SIZE);
DPRINTFN(1,("usb_init_hub: getting hub descriptor\n"));
err = usbd_do_request(dev, &req, &hubdesc);
nports = hubdesc.bNbrPorts;
if (!err && nports > 7) {
USETW(req.wLength, USB_HUB_DESCRIPTOR_SIZE + (nports+1) / 8);
err = usbd_do_request(dev, &req, &hubdesc);
}
if (err) {
DPRINTF(("%s: getting hub descriptor failed, error=%s\n",
sc->sc_dev.dv_xname, usbd_errstr(err)));
return;
}
for (nremov = 0, port = 1; port <= nports; port++)
if (!UHD_NOT_REMOV(&hubdesc, port))
nremov++;
#ifdef UHUB_DEBUG
printf("%s: %d port%s with %d removable, %s powered",
sc->sc_dev.dv_xname, nports, nports != 1 ? "s" : "",
nremov, dev->self_powered ? "self" : "bus");
if (dev->depth > 0 && UHUB_IS_HIGH_SPEED(sc)) {
printf(", %s transaction translator%s",
UHUB_IS_SINGLE_TT(sc) ? "single" : "multiple",
UHUB_IS_SINGLE_TT(sc) ? "" : "s");
}
printf("\n");
#endif
if (nports == 0) {
printf("%s: no ports, hub ignored\n", sc->sc_dev.dv_xname);
goto bad;
}
hub = malloc(sizeof(*hub) + (nports-1) * sizeof(struct usbd_port),
M_USBDEV, M_NOWAIT);
if (hub == NULL)
return;
dev->hub = hub;
dev->hub->hubsoftc = sc;
hub->explore = uhub_explore;
hub->hubdesc = hubdesc;
DPRINTFN(1,("usbhub_init_hub: selfpowered=%d, parent=%p, "
"parent->selfpowered=%d\n",
dev->self_powered, dev->powersrc->parent,
dev->powersrc->parent ?
dev->powersrc->parent->self_powered : 0));
if (!dev->self_powered && dev->powersrc->parent != NULL &&
!dev->powersrc->parent->self_powered) {
printf("%s: bus powered hub connected to bus powered hub, "
"ignored\n", sc->sc_dev.dv_xname);
goto bad;
}
/* Set up interrupt pipe. */
err = usbd_device2interface_handle(dev, 0, &iface);
if (err) {
printf("%s: no interface handle\n", sc->sc_dev.dv_xname);
goto bad;
}
ed = usbd_interface2endpoint_descriptor(iface, 0);
if (ed == NULL) {
printf("%s: no endpoint descriptor\n", sc->sc_dev.dv_xname);
goto bad;
}
if ((ed->bmAttributes & UE_XFERTYPE) != UE_INTERRUPT) {
printf("%s: bad interrupt endpoint\n", sc->sc_dev.dv_xname);
goto bad;
}
err = usbd_open_pipe_intr(iface, ed->bEndpointAddress,
USBD_SHORT_XFER_OK, &sc->sc_ipipe, sc, sc->sc_status,
sizeof(sc->sc_status), uhub_intr, UHUB_INTR_INTERVAL);
if (err) {
printf("%s: cannot open interrupt pipe\n",
sc->sc_dev.dv_xname);
goto bad;
}
/* Wait with power off for a while. */
usbd_delay_ms(dev, USB_POWER_DOWN_TIME);
usbd_add_drv_event(USB_EVENT_DRIVER_ATTACH, dev, &sc->sc_dev);
/*
* To have the best chance of success we do things in the exact same
* order as Windoze98. This should not be necessary, but some
* devices do not follow the USB specs to the letter.
*
* These are the events on the bus when a hub is attached:
* Get device and config descriptors (see attach code)
* Get hub descriptor (see above)
* For all ports
* turn on power
* wait for power to become stable
* (all below happens in explore code)
* For all ports
* clear C_PORT_CONNECTION
* For all ports
* get port status
* if device connected
* wait 100 ms
* turn on reset
* wait
* clear C_PORT_RESET
* get port status
* proceed with device attachment
*/
if (UHUB_IS_HIGH_SPEED(sc)) {
tts = malloc((UHUB_IS_SINGLE_TT(sc) ? 1 : nports) *
sizeof (struct usbd_tt), M_USBDEV, M_NOWAIT);
if (!tts)
goto bad;
}
/* Set up data structures */
for (p = 0; p < nports; p++) {
struct usbd_port *up = &hub->ports[p];
up->device = NULL;
up->parent = dev;
up->portno = p+1;
if (dev->self_powered)
/* Self powered hub, give ports maximum current. */
up->power = USB_MAX_POWER;
else
up->power = USB_MIN_POWER;
up->restartcnt = 0;
up->reattach = 0;
if (UHUB_IS_HIGH_SPEED(sc)) {
up->tt = &tts[UHUB_IS_SINGLE_TT(sc) ? 0 : p];
up->tt->hub = hub;
} else {
up->tt = NULL;
}
}
/* XXX should check for none, individual, or ganged power? */
pwrdly = dev->hub->hubdesc.bPwrOn2PwrGood * UHD_PWRON_FACTOR
+ USB_EXTRA_POWER_UP_TIME;
for (port = 1; port <= nports; port++) {
/* Turn the power on. */
err = usbd_set_port_feature(dev, port, UHF_PORT_POWER);
if (err)
printf("%s: port %d power on failed, %s\n",
sc->sc_dev.dv_xname, port,
usbd_errstr(err));
DPRINTF(("usb_init_port: turn on port %d power\n", port));
}
/* Wait for stable power. Root hubs delay in their event thread. */
if (dev->powersrc->parent != NULL)
usbd_delay_ms(dev, pwrdly);
/* The usual exploration will finish the setup. */
sc->sc_running = 1;
return;
bad:
if (hub)
free(hub, M_USBDEV);
dev->hub = NULL;
}
usbd_status
uhub_explore(usbd_device_handle dev)
{
usb_hub_descriptor_t *hd = &dev->hub->hubdesc;
struct uhub_softc *sc = dev->hub->hubsoftc;
struct usbd_port *up;
usbd_status err;
int speed;
int port;
int change, status, reconnect;
DPRINTFN(10, ("uhub_explore dev=%p addr=%d\n", dev, dev->address));
if (!sc->sc_running)
return (USBD_NOT_STARTED);
/* Ignore hubs that are too deep. */
if (dev->depth > USB_HUB_MAX_DEPTH)
return (USBD_TOO_DEEP);
for(port = 1; port <= hd->bNbrPorts; port++) {
up = &dev->hub->ports[port-1];
err = usbd_get_port_status(dev, port, &up->status);
if (err) {
DPRINTF(("uhub_explore: get port status failed, "
"error=%s\n", usbd_errstr(err)));
continue;
}
status = UGETW(up->status.wPortStatus);
change = UGETW(up->status.wPortChange);
reconnect = up->reattach;
up->reattach = 0;
DPRINTFN(3,("uhub_explore: %s port %d status 0x%04x 0x%04x\n",
sc->sc_dev.dv_xname, port, status, change));
if (change & UPS_C_PORT_ENABLED) {
DPRINTF(("uhub_explore: C_PORT_ENABLED\n"));
usbd_clear_port_feature(dev, port, UHF_C_PORT_ENABLE);
if (change & UPS_C_CONNECT_STATUS) {
/* Ignore the port error if the device
vanished. */
} else if (status & UPS_PORT_ENABLED) {
printf("%s: illegal enable change, port %d\n",
sc->sc_dev.dv_xname, port);
} else {
/* Port error condition. */
if (up->restartcnt) /* no message first time */
printf("%s: port error, restarting "
"port %d\n",
sc->sc_dev.dv_xname, port);
if (up->restartcnt++ < USBD_RESTART_MAX)
goto disco;
else
printf("%s: port error, giving up "
"port %d\n",
sc->sc_dev.dv_xname, port);
}
}
if (!reconnect && !(change & UPS_C_CONNECT_STATUS)) {
DPRINTFN(3,("uhub_explore: port=%d !C_CONNECT_"
"STATUS\n", port));
/* No status change, just do recursive explore. */
if (up->device != NULL && up->device->hub != NULL)
up->device->hub->explore(up->device);
#if 0 && defined(DIAGNOSTIC)
if (up->device == NULL &&
(status & UPS_CURRENT_CONNECT_STATUS))
printf("%s: connected, no device\n",
sc->sc_dev.dv_xname);
#endif
continue;
}
/* We have a connect status change, handle it. */
DPRINTF(("uhub_explore: status change hub=%d port=%d\n",
dev->address, port));
usbd_clear_port_feature(dev, port, UHF_C_PORT_CONNECTION);
/*usbd_clear_port_feature(dev, port, UHF_C_PORT_ENABLE);*/
/*
* If there is already a device on the port the change status
* must mean that is has disconnected. Looking at the
* current connect status is not enough to figure this out
* since a new unit may have been connected before we handle
* the disconnect.
*/
disco:
if (up->device != NULL) {
/* Disconnected */
DPRINTF(("uhub_explore: device addr=%d disappeared "
"on port %d\n", up->device->address, port));
usb_disconnect_port(up, &sc->sc_dev);
usbd_clear_port_feature(dev, port,
UHF_C_PORT_CONNECTION);
}
if (!(status & UPS_CURRENT_CONNECT_STATUS)) {
/* Nothing connected, just ignore it. */
DPRINTFN(3,("uhub_explore: port=%d !CURRENT_CONNECT"
"_STATUS\n", port));
continue;
}
/* Connected */
if (!(status & UPS_PORT_POWER))
printf("%s: strange, connected port %d has no power\n",
sc->sc_dev.dv_xname, port);
/* Wait for maximum device power up time. */
usbd_delay_ms(dev, USB_PORT_POWERUP_DELAY);
/* Reset port, which implies enabling it. */
if (usbd_reset_port(dev, port, &up->status)) {
printf("%s: port %d reset failed\n",
sc->sc_dev.dv_xname, port);
continue;
}
/* Get port status again, it might have changed during reset */
err = usbd_get_port_status(dev, port, &up->status);
if (err) {
DPRINTF(("uhub_explore: get port status failed, "
"error=%s\n", usbd_errstr(err)));
continue;
}
status = UGETW(up->status.wPortStatus);
change = UGETW(up->status.wPortChange);
if (!(status & UPS_CURRENT_CONNECT_STATUS)) {
/* Nothing connected, just ignore it. */
#ifdef UHUB_DEBUG
printf("%s: port %d, device disappeared after reset\n",
sc->sc_dev.dv_xname, port);
#endif
continue;
}
/* Figure out device speed */
if (status & UPS_HIGH_SPEED)
speed = USB_SPEED_HIGH;
else if (status & UPS_LOW_SPEED)
speed = USB_SPEED_LOW;
else
speed = USB_SPEED_FULL;
/* Get device info and set its address. */
err = usbd_new_device(&sc->sc_dev, dev->bus,
dev->depth + 1, speed, port, up);
/* XXX retry a few times? */
if (err) {
DPRINTFN(-1,("uhub_explore: usbd_new_device failed, "
"error=%s\n", usbd_errstr(err)));
/* Avoid addressing problems by disabling. */
/* usbd_reset_port(dev, port, &up->status); */
/*
* The unit refused to accept a new address, or had
* some other serious problem. Since we cannot leave
* at 0 we have to disable the port instead.
*/
printf("%s: device problem, disabling port %d\n",
sc->sc_dev.dv_xname, port);
usbd_clear_port_feature(dev, port, UHF_PORT_ENABLE);
} else {
/* The port set up succeeded, reset error count. */
up->restartcnt = 0;
if (up->device->hub)
up->device->hub->explore(up->device);
}
}
return (USBD_NORMAL_COMPLETION);
}
int
uhub_activate(struct device *self, enum devact act)
{
struct uhub_softc *sc = (struct uhub_softc *)self;
struct usbd_hub *hub = sc->sc_hub->hub;
usbd_device_handle dev;
int nports, port, i;
switch (act) {
case DVACT_ACTIVATE:
break;
case DVACT_DEACTIVATE:
if (hub == NULL) /* malfunctioning hub */
break;
nports = hub->hubdesc.bNbrPorts;
for(port = 0; port < nports; port++) {
dev = hub->ports[port].device;
if (dev != NULL && dev->subdevs != NULL) {
for (i = 0; dev->subdevs[i] != NULL; i++)
config_deactivate(dev->subdevs[i]);
}
}
break;
}
return (0);
}
/*
* Called from process context when the hub is gone.
* Detach all devices on active ports.
*/
int
uhub_detach(struct device *self, int flags)
{
struct uhub_softc *sc = (struct uhub_softc *)self;
struct usbd_hub *hub = sc->sc_hub->hub;
struct usbd_port *rup;
int port, nports;
DPRINTF(("uhub_detach: sc=%p flags=%d\n", sc, flags));
if (hub == NULL) /* Must be partially working */
return (0);
usbd_abort_pipe(sc->sc_ipipe);
usbd_close_pipe(sc->sc_ipipe);
nports = hub->hubdesc.bNbrPorts;
for(port = 0; port < nports; port++) {
rup = &hub->ports[port];
if (rup->device)
usb_disconnect_port(rup, self);
}
usbd_add_drv_event(USB_EVENT_DRIVER_DETACH, sc->sc_hub,
&sc->sc_dev);
if (hub->ports[0].tt)
free(hub->ports[0].tt, M_USBDEV);
free(hub, M_USBDEV);
sc->sc_hub->hub = NULL;
return (0);
}
/*
* Hub interrupt.
* This an indication that some port has changed status.
* Notify the bus event handler thread that we need
* to be explored again.
*/
void
uhub_intr(usbd_xfer_handle xfer, usbd_private_handle addr, usbd_status status)
{
struct uhub_softc *sc = addr;
DPRINTFN(5,("uhub_intr: sc=%p\n", sc));
if (status == USBD_STALLED)
usbd_clear_endpoint_stall_async(sc->sc_ipipe);
else if (status == USBD_NORMAL_COMPLETION)
usb_needs_explore(sc->sc_hub);
}