Annotation of sys/dev/usb/usbdivar.h, Revision 1.1
1.1 ! nbrk 1: /* $OpenBSD: usbdivar.h,v 1.32 2007/06/15 11:41:48 mbalmer Exp $ */
! 2: /* $NetBSD: usbdivar.h,v 1.70 2002/07/11 21:14:36 augustss Exp $ */
! 3: /* $FreeBSD: src/sys/dev/usb/usbdivar.h,v 1.11 1999/11/17 22:33:51 n_hibma Exp $ */
! 4:
! 5: /*
! 6: * Copyright (c) 1998 The NetBSD Foundation, Inc.
! 7: * All rights reserved.
! 8: *
! 9: * This code is derived from software contributed to The NetBSD Foundation
! 10: * by Lennart Augustsson (lennart@augustsson.net) at
! 11: * Carlstedt Research & Technology.
! 12: *
! 13: * Redistribution and use in source and binary forms, with or without
! 14: * modification, are permitted provided that the following conditions
! 15: * are met:
! 16: * 1. Redistributions of source code must retain the above copyright
! 17: * notice, this list of conditions and the following disclaimer.
! 18: * 2. Redistributions in binary form must reproduce the above copyright
! 19: * notice, this list of conditions and the following disclaimer in the
! 20: * documentation and/or other materials provided with the distribution.
! 21: * 3. All advertising materials mentioning features or use of this software
! 22: * must display the following acknowledgement:
! 23: * This product includes software developed by the NetBSD
! 24: * Foundation, Inc. and its contributors.
! 25: * 4. Neither the name of The NetBSD Foundation nor the names of its
! 26: * contributors may be used to endorse or promote products derived
! 27: * from this software without specific prior written permission.
! 28: *
! 29: * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
! 30: * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
! 31: * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
! 32: * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
! 33: * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
! 34: * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
! 35: * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
! 36: * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
! 37: * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
! 38: * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
! 39: * POSSIBILITY OF SUCH DAMAGE.
! 40: */
! 41:
! 42: /* From usb_mem.h */
! 43: struct usb_dma_block;
! 44: typedef struct {
! 45: struct usb_dma_block *block;
! 46: u_int offs;
! 47: } usb_dma_t;
! 48:
! 49: struct usbd_xfer;
! 50: struct usbd_pipe;
! 51:
! 52: struct usbd_endpoint {
! 53: usb_endpoint_descriptor_t *edesc;
! 54: int refcnt;
! 55: int savedtoggle;
! 56: };
! 57:
! 58: struct usbd_bus_methods {
! 59: usbd_status (*open_pipe)(struct usbd_pipe *pipe);
! 60: void (*soft_intr)(void *);
! 61: void (*do_poll)(struct usbd_bus *);
! 62: usbd_status (*allocm)(struct usbd_bus *, usb_dma_t *,
! 63: u_int32_t bufsize);
! 64: void (*freem)(struct usbd_bus *, usb_dma_t *);
! 65: struct usbd_xfer * (*allocx)(struct usbd_bus *);
! 66: void (*freex)(struct usbd_bus *, struct usbd_xfer *);
! 67: };
! 68:
! 69: struct usbd_pipe_methods {
! 70: usbd_status (*transfer)(usbd_xfer_handle xfer);
! 71: usbd_status (*start)(usbd_xfer_handle xfer);
! 72: void (*abort)(usbd_xfer_handle xfer);
! 73: void (*close)(usbd_pipe_handle pipe);
! 74: void (*cleartoggle)(usbd_pipe_handle pipe);
! 75: void (*done)(usbd_xfer_handle xfer);
! 76: };
! 77:
! 78: struct usbd_tt {
! 79: struct usbd_hub *hub;
! 80: };
! 81:
! 82: struct usbd_port {
! 83: usb_port_status_t status;
! 84: u_int16_t power; /* mA of current on port */
! 85: u_int8_t portno;
! 86: u_int8_t restartcnt;
! 87: #define USBD_RESTART_MAX 5
! 88: u_int8_t reattach;
! 89: struct usbd_device *device; /* Connected device */
! 90: struct usbd_device *parent; /* The ports hub */
! 91: struct usbd_tt *tt; /* Transaction translator (if any) */
! 92: };
! 93:
! 94: struct usbd_hub {
! 95: usbd_status (*explore)(usbd_device_handle hub);
! 96: void *hubsoftc;
! 97: usb_hub_descriptor_t hubdesc;
! 98: struct usbd_port ports[1];
! 99: };
! 100:
! 101: struct usb_softc;
! 102:
! 103: /*****/
! 104:
! 105: struct usbd_bus {
! 106: /* Filled by HC driver */
! 107: struct device bdev; /* base device, host adapter */
! 108: struct usbd_bus_methods *methods;
! 109: u_int32_t pipe_size; /* size of a pipe struct */
! 110: /* Filled by usb driver */
! 111: struct usbd_device *root_hub;
! 112: usbd_device_handle devices[USB_MAX_DEVICES];
! 113: char needs_explore;/* a hub a signalled a change */
! 114: char use_polling;
! 115: struct usb_softc *usbctl;
! 116: struct usb_device_stats stats;
! 117: int intr_context;
! 118: u_int no_intrs;
! 119: int usbrev; /* USB revision */
! 120: #define USBREV_UNKNOWN 0
! 121: #define USBREV_PRE_1_0 1
! 122: #define USBREV_1_0 2
! 123: #define USBREV_1_1 3
! 124: #define USBREV_2_0 4
! 125: #define USBREV_STR { "unknown", "pre 1.0", "1.0", "1.1", "2.0" }
! 126:
! 127: #ifdef __HAVE_GENERIC_SOFT_INTERRUPTS
! 128: void *soft; /* soft interrupt cookie */
! 129: #endif
! 130: bus_dma_tag_t dmatag; /* DMA tag */
! 131: };
! 132:
! 133: struct usbd_device {
! 134: struct usbd_bus *bus; /* our controller */
! 135: struct usbd_pipe *default_pipe; /* pipe 0 */
! 136: u_int8_t address; /* device address */
! 137: u_int8_t config; /* current configuration # */
! 138: u_int8_t depth; /* distance from root hub */
! 139: u_int8_t speed; /* low/full/high speed */
! 140: u_int8_t self_powered; /* flag for self powered */
! 141: u_int16_t power; /* mA the device uses */
! 142: int16_t langid; /* language for strings */
! 143: #define USBD_NOLANG (-1)
! 144: usb_event_cookie_t cookie; /* unique connection id */
! 145: struct usbd_port *powersrc; /* upstream hub port, or 0 */
! 146: struct usbd_device *myhub; /* upstream hub */
! 147: struct usbd_port *myhsport; /* closest high speed port */
! 148: struct usbd_endpoint def_ep; /* for pipe 0 */
! 149: usb_endpoint_descriptor_t def_ep_desc; /* for pipe 0 */
! 150: struct usbd_interface *ifaces; /* array of all interfaces */
! 151: usb_device_descriptor_t ddesc; /* device descriptor */
! 152: usb_config_descriptor_t *cdesc; /* full config descr */
! 153: const struct usbd_quirks *quirks; /* device quirks, always set */
! 154: struct usbd_hub *hub; /* only if this is a hub */
! 155: struct device **subdevs; /* sub-devices, 0 terminated */
! 156: };
! 157:
! 158: struct usbd_interface {
! 159: struct usbd_device *device;
! 160: usb_interface_descriptor_t *idesc;
! 161: int index;
! 162: int altindex;
! 163: struct usbd_endpoint *endpoints;
! 164: void *priv;
! 165: LIST_HEAD(, usbd_pipe) pipes;
! 166: };
! 167:
! 168: struct usbd_pipe {
! 169: struct usbd_interface *iface;
! 170: struct usbd_device *device;
! 171: struct usbd_endpoint *endpoint;
! 172: int refcnt;
! 173: char running;
! 174: char aborting;
! 175: SIMPLEQ_HEAD(, usbd_xfer) queue;
! 176: LIST_ENTRY(usbd_pipe) next;
! 177:
! 178: usbd_xfer_handle intrxfer; /* used for repeating requests */
! 179: char repeat;
! 180: int interval;
! 181:
! 182: /* Filled by HC driver. */
! 183: struct usbd_pipe_methods *methods;
! 184: };
! 185:
! 186: struct usbd_xfer {
! 187: struct usbd_pipe *pipe;
! 188: void *priv;
! 189: void *buffer;
! 190: u_int32_t length;
! 191: u_int32_t actlen;
! 192: u_int16_t flags;
! 193: u_int32_t timeout;
! 194: usbd_status status;
! 195: usbd_callback callback;
! 196: __volatile char done;
! 197: #ifdef DIAGNOSTIC
! 198: u_int32_t busy_free;
! 199: #define XFER_FREE 0x46524545
! 200: #define XFER_BUSY 0x42555359
! 201: #define XFER_ONQU 0x4f4e5155
! 202: #endif
! 203:
! 204: /* For control pipe */
! 205: usb_device_request_t request;
! 206:
! 207: /* For isoc */
! 208: u_int16_t *frlengths;
! 209: int nframes;
! 210:
! 211: /* For memory allocation */
! 212: struct usbd_device *device;
! 213: usb_dma_t dmabuf;
! 214:
! 215: int rqflags;
! 216: #define URQ_REQUEST 0x01
! 217: #define URQ_AUTO_DMABUF 0x10
! 218: #define URQ_DEV_DMABUF 0x20
! 219:
! 220: SIMPLEQ_ENTRY(usbd_xfer) next;
! 221:
! 222: void *hcpriv; /* private use by the HC driver */
! 223:
! 224: struct timeout timeout_handle;
! 225: };
! 226:
! 227: void usbd_init(void);
! 228: void usbd_finish(void);
! 229:
! 230: #ifdef USB_DEBUG
! 231: void usbd_dump_iface(struct usbd_interface *iface);
! 232: void usbd_dump_device(struct usbd_device *dev);
! 233: void usbd_dump_endpoint(struct usbd_endpoint *endp);
! 234: void usbd_dump_queue(usbd_pipe_handle pipe);
! 235: void usbd_dump_pipe(usbd_pipe_handle pipe);
! 236: #endif
! 237:
! 238: /* Routines from usb_subr.c */
! 239: int usbctlprint(void *, const char *);
! 240: void usb_delay_ms(usbd_bus_handle, u_int);
! 241: usbd_status usbd_reset_port(usbd_device_handle dev,
! 242: int port, usb_port_status_t *ps);
! 243: usbd_status usbd_setup_pipe(usbd_device_handle dev,
! 244: usbd_interface_handle iface, struct usbd_endpoint *, int,
! 245: usbd_pipe_handle *pipe);
! 246: usbd_status usbd_new_device(struct device *parent, usbd_bus_handle bus,
! 247: int depth, int lowspeed, int port, struct usbd_port *);
! 248: void usbd_remove_device(usbd_device_handle, struct usbd_port *);
! 249: int usbd_printBCD(char *cp, size_t len, int bcd);
! 250: usbd_status usbd_fill_iface_data(usbd_device_handle dev, int i, int a);
! 251: void usb_free_device(usbd_device_handle);
! 252:
! 253: usbd_status usb_insert_transfer(usbd_xfer_handle xfer);
! 254: void usb_transfer_complete(usbd_xfer_handle xfer);
! 255: void usb_disconnect_port(struct usbd_port *up, struct device *);
! 256:
! 257: /* Routines from usb.c */
! 258: void usb_needs_explore(usbd_device_handle);
! 259: void usb_needs_reattach(usbd_device_handle);
! 260: void usb_schedsoftintr(struct usbd_bus *);
! 261:
! 262: /*
! 263: * XXX This check is extremely bogus. Bad Bad Bad.
! 264: */
! 265: #if defined(DIAGNOSTIC) && 0
! 266: #define SPLUSBCHECK \
! 267: do { int _s = splusb(), _su = splusb(); \
! 268: if (!cold && _s != _su) printf("SPLUSBCHECK failed 0x%x!=0x%x, %s:%d\n", \
! 269: _s, _su, __FILE__, __LINE__); \
! 270: splx(_s); \
! 271: } while (0)
! 272: #else
! 273: #define SPLUSBCHECK
! 274: #endif
! 275:
! 276: /* Locator stuff. */
! 277:
! 278: /* XXX these values are used to statically bind some elements in the USB tree
! 279: * to specific driver instances. This should be somehow emulated in FreeBSD
! 280: * but can be done later on.
! 281: * The values are copied from the files.usb file in the NetBSD sources.
! 282: */
! 283: #define UHUBCF_PORT_DEFAULT -1
! 284: #define UHUBCF_CONFIGURATION_DEFAULT -1
! 285: #define UHUBCF_INTERFACE_DEFAULT -1
! 286: #define UHUBCF_VENDOR_DEFAULT -1
! 287: #define UHUBCF_PRODUCT_DEFAULT -1
! 288: #define UHUBCF_RELEASE_DEFAULT -1
! 289:
! 290: #define UHUBCF_PORT 0
! 291: #define UHUBCF_CONFIGURATION 1
! 292: #define UHUBCF_INTERFACE 2
! 293: #define UHUBCF_VENDOR 3
! 294: #define UHUBCF_PRODUCT 4
! 295: #define UHUBCF_RELEASE 5
! 296:
! 297: #define uhubcf_port cf_loc[UHUBCF_PORT]
! 298: #define uhubcf_configuration cf_loc[UHUBCF_CONFIGURATION]
! 299: #define uhubcf_interface cf_loc[UHUBCF_INTERFACE]
! 300: #define uhubcf_vendor cf_loc[UHUBCF_VENDOR]
! 301: #define uhubcf_product cf_loc[UHUBCF_PRODUCT]
! 302: #define uhubcf_release cf_loc[UHUBCF_RELEASE]
! 303: #define UHUB_UNK_PORT UHUBCF_PORT_DEFAULT /* wildcarded 'port' */
! 304: #define UHUB_UNK_CONFIGURATION UHUBCF_CONFIGURATION_DEFAULT /* wildcarded 'configuration' */
! 305: #define UHUB_UNK_INTERFACE UHUBCF_INTERFACE_DEFAULT /* wildcarded 'interface' */
! 306: #define UHUB_UNK_VENDOR UHUBCF_VENDOR_DEFAULT /* wildcarded 'vendor' */
! 307: #define UHUB_UNK_PRODUCT UHUBCF_PRODUCT_DEFAULT /* wildcarded 'product' */
! 308: #define UHUB_UNK_RELEASE UHUBCF_RELEASE_DEFAULT /* wildcarded 'release' */
CVSweb