File: [local] / sys / lib / libkern / arch / i386 / setjmp.S (download)
Revision 1.1.1.1 (vendor branch), Tue Mar 4 16:15:13 2008 UTC (16 years, 6 months ago) by nbrk
Branch: OPENBSD_4_2_BASE, MAIN
CVS Tags: jornada-partial-support-wip, HEAD Changes since 1.1: +0 -0 lines
Import of OpenBSD 4.2 release kernel tree with initial code to support
Jornada 720/728, StrongARM 1110-based handheld PC.
At this point kernel roots on NFS and boots into vfs_mountroot() and traps.
What is supported:
- glass console, Jornada framebuffer (jfb) works in 16bpp direct color mode
(needs some palette tweaks for non black/white/blue colors, i think)
- saic, SA11x0 interrupt controller (needs cleanup)
- sacom, SA11x0 UART (supported only as boot console for now)
- SA11x0 GPIO controller fully supported (but can't handle multiple interrupt
handlers on one gpio pin)
- sassp, SSP port on SA11x0 that attaches spibus
- Jornada microcontroller (jmcu) to control kbd, battery, etc throught
the SPI bus (wskbd attaches on jmcu, but not tested)
- tod functions seem work
- initial code for SA-1111 (chip companion) : this is TODO
Next important steps, i think:
- gpio and intc on sa1111
- pcmcia support for sa11x0 (and sa1111 help logic)
- REAL root on nfs when we have PCMCIA support (we may use any of supported pccard NICs)
- root on wd0! (using already supported PCMCIA-ATA)
|
/* $OpenBSD: setjmp.S,v 1.3 2003/06/02 23:28:08 millert Exp $ */
/* $NetBSD: setjmp.S,v 1.5 1994/10/26 06:39:14 cgd Exp $ */
/*-
* Copyright (c) 1990 The Regents of the University of California.
* All rights reserved.
*
* This code is derived from software contributed to Berkeley by
* William Jolitz.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @(#)setjmp.s 5.1 (Berkeley) 4/23/90
*/
/*
* C library -- _setjmp, _longjmp
*
* longjmp(a,v)
* will generate a "return(v)" from the last call to
* setjmp(a)
* by restoring registers from the stack.
* The previous signal state is restored.
*/
#include "DEFS.h"
#include "SYS.h"
ENTRY(setjmp)
pushl $0
call PIC_PLT(_sigblock)
popl %edx
movl 4(%esp),%ecx
movl 0(%esp),%edx
movl %edx, 0(%ecx)
movl %ebx, 4(%ecx)
movl %esp, 8(%ecx)
movl %ebp,12(%ecx)
movl %esi,16(%ecx)
movl %edi,20(%ecx)
movl %eax,24(%ecx)
xorl %eax,%eax
ret
ENTRY(longjmp)
movl 4(%esp),%edx
pushl 24(%edx)
call PIC_PLT(_sigsetmask)
popl %eax
movl 4(%esp),%edx
movl 8(%esp),%eax
movl 0(%edx),%ecx
movl 4(%edx),%ebx
movl 8(%edx),%esp
movl 12(%edx),%ebp
movl 16(%edx),%esi
movl 20(%edx),%edi
testl %eax,%eax
jnz 1f
incl %eax
1: movl %ecx,0(%esp)
ret