File: [local] / sys / lib / libkern / arch / mips64 / bcopy.S (download)
Revision 1.1.1.1 (vendor branch), Tue Mar 4 16:15:13 2008 UTC (16 years, 6 months ago) by nbrk
Branch: OPENBSD_4_2_BASE, MAIN
CVS Tags: jornada-partial-support-wip, HEAD Changes since 1.1: +0 -0 lines
Import of OpenBSD 4.2 release kernel tree with initial code to support
Jornada 720/728, StrongARM 1110-based handheld PC.
At this point kernel roots on NFS and boots into vfs_mountroot() and traps.
What is supported:
- glass console, Jornada framebuffer (jfb) works in 16bpp direct color mode
(needs some palette tweaks for non black/white/blue colors, i think)
- saic, SA11x0 interrupt controller (needs cleanup)
- sacom, SA11x0 UART (supported only as boot console for now)
- SA11x0 GPIO controller fully supported (but can't handle multiple interrupt
handlers on one gpio pin)
- sassp, SSP port on SA11x0 that attaches spibus
- Jornada microcontroller (jmcu) to control kbd, battery, etc throught
the SPI bus (wskbd attaches on jmcu, but not tested)
- tod functions seem work
- initial code for SA-1111 (chip companion) : this is TODO
Next important steps, i think:
- gpio and intc on sa1111
- pcmcia support for sa11x0 (and sa1111 help logic)
- REAL root on nfs when we have PCMCIA support (we may use any of supported pccard NICs)
- root on wd0! (using already supported PCMCIA-ATA)
|
/* $OpenBSD: bcopy.S,v 1.4 2004/10/08 14:42:09 pefo Exp $ */
/*-
* Copyright (c) 1991, 1993
* The Regents of the University of California. All rights reserved.
*
* This code is derived from software contributed to Berkeley by
* Ralph Campbell.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include "DEFS.h"
/*
* memcpy(to, from, len)
* {ov}bcopy(from, to, len)
*/
LEAF(memcpy, 0)
.set noreorder
move v0, a0 # swap from and to
move a0, a1
move a1, v0
ALEAF(bcopy)
ALEAF(ovbcopy)
.set noreorder
PTR_ADDU t0, a0, a2 # t0 = end of s1 region
sltu t1, a1, t0
sltu t2, a0, a1
and t1, t1, t2 # t1 = true if from < to < (from+len)
beq t1, zero, forward # non overlapping, do forward copy
slt t2, a2, 12 # check for small copy
ble a2, zero, 2f
PTR_ADDU t1, a1, a2 # t1 = end of to region
1:
lb v1, -1(t0) # copy bytes backwards,
PTR_SUBU t0, t0, 1 # doesnt happen often so do slow way
PTR_SUBU t1, t1, 1
bne t0, a0, 1b
sb v1, 0(t1)
2:
j ra
nop
forward:
bne t2, zero, smallcpy # do a small bcopy
xor v1, a0, a1 # compare low two bits of addresses
and v1, v1, 3
PTR_SUBU a3, zero, a1 # compute # bytes to word align address
beq v1, zero, aligned # addresses can be word aligned
and a3, a3, 3
beq a3, zero, 1f
PTR_SUBU a2, a2, a3 # subtract from remaining count
LWHI v1, 0(a0) # get next 4 bytes (unaligned)
LWLO v1, 3(a0)
PTR_ADDU a0, a0, a3
SWHI v1, 0(a1) # store 1, 2, or 3 bytes to align a1
PTR_ADDU a1, a1, a3
1:
and v1, a2, 3 # compute number of words left
PTR_SUBU a3, a2, v1
move a2, v1
PTR_ADDU a3, a3, a0 # compute ending address
2:
LWHI v1, 0(a0) # copy words a0 unaligned, a1 aligned
LWLO v1, 3(a0)
PTR_ADDU a0, a0, 4
sw v1, 0(a1)
PTR_ADDU a1, a1, 4
bne a0, a3, 2b
nop # We have to do this mmu-bug.
b smallcpy
nop
aligned:
beq a3, zero, 1f
PTR_SUBU a2, a2, a3 # subtract from remaining count
LWHI v1, 0(a0) # copy 1, 2, or 3 bytes to align
PTR_ADDU a0, a0, a3
SWHI v1, 0(a1)
PTR_ADDU a1, a1, a3
1:
and v1, a2, 3 # compute number of whole words left
PTR_SUBU a3, a2, v1
move a2, v1
PTR_ADDU a3, a3, a0 # compute ending address
2:
lw v1, 0(a0) # copy words
PTR_ADDU a0, a0, 4
sw v1, 0(a1)
bne a0, a3, 2b
PTR_ADDU a1, a1, 4
smallcpy:
ble a2, zero, 2f
PTR_ADDU a3, a2, a0 # compute ending address
1:
lbu v1, 0(a0) # copy bytes
PTR_ADDU a0, a0, 1
sb v1, 0(a1)
bne a0, a3, 1b
PTR_ADDU a1, a1, 1 # MMU BUG ? can not do -1(a1) at 0x80000000!!
2:
j ra
nop
END(memcpy)