Annotation of sys/netinet/if_ether.h, Revision 1.1.1.1
1.1 nbrk 1: /* $OpenBSD: if_ether.h,v 1.39 2007/05/16 09:24:07 dlg Exp $ */
2: /* $NetBSD: if_ether.h,v 1.22 1996/05/11 13:00:00 mycroft Exp $ */
3:
4: /*
5: * Copyright (c) 1982, 1986, 1993
6: * The Regents of the University of California. All rights reserved.
7: *
8: * Redistribution and use in source and binary forms, with or without
9: * modification, are permitted provided that the following conditions
10: * are met:
11: * 1. Redistributions of source code must retain the above copyright
12: * notice, this list of conditions and the following disclaimer.
13: * 2. Redistributions in binary form must reproduce the above copyright
14: * notice, this list of conditions and the following disclaimer in the
15: * documentation and/or other materials provided with the distribution.
16: * 3. Neither the name of the University nor the names of its contributors
17: * may be used to endorse or promote products derived from this software
18: * without specific prior written permission.
19: *
20: * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
21: * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
22: * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
23: * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
24: * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
25: * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
26: * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
27: * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
28: * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
29: * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
30: * SUCH DAMAGE.
31: *
32: * @(#)if_ether.h 8.1 (Berkeley) 6/10/93
33: */
34:
35: #ifndef _NETINET_IF_ETHER_H_
36: #define _NETINET_IF_ETHER_H_
37:
38: /*
39: * Some basic Ethernet constants.
40: */
41: #define ETHER_ADDR_LEN 6 /* Ethernet address length */
42: #define ETHER_TYPE_LEN 2 /* Ethernet type field length */
43: #define ETHER_CRC_LEN 4 /* Ethernet CRC length */
44: #define ETHER_HDR_LEN ((ETHER_ADDR_LEN * 2) + ETHER_TYPE_LEN)
45: #define ETHER_MIN_LEN 64 /* Minimum frame length, CRC included */
46: #define ETHER_MAX_LEN 1518 /* Maximum frame length, CRC included */
47: #define ETHER_MAX_DIX_LEN 1536 /* Maximum DIX frame length */
48:
49: /*
50: * Some Ethernet extensions.
51: */
52: #define ETHER_VLAN_ENCAP_LEN 4 /* len of 802.1Q VLAN encapsulation */
53:
54: /*
55: * Mbuf adjust factor to force 32-bit alignment of IP header.
56: * Drivers should do m_adj(m, ETHER_ALIGN) when setting up a
57: * receive so the upper layers get the IP header properly aligned
58: * past the 14-byte Ethernet header.
59: */
60: #define ETHER_ALIGN 2 /* driver adjust for IP hdr alignment */
61:
62: /*
63: * Ethernet address - 6 octets
64: */
65: struct ether_addr {
66: u_int8_t ether_addr_octet[ETHER_ADDR_LEN];
67: };
68:
69: /*
70: * The length of the combined header.
71: */
72: struct ether_header {
73: u_int8_t ether_dhost[ETHER_ADDR_LEN];
74: u_int8_t ether_shost[ETHER_ADDR_LEN];
75: u_int16_t ether_type;
76: };
77:
78: #include <net/ethertypes.h>
79:
80: #define ETHER_IS_MULTICAST(addr) (*(addr) & 0x01) /* is address mcast/bcast? */
81:
82: #define ETHERMTU (ETHER_MAX_LEN - ETHER_HDR_LEN - ETHER_CRC_LEN)
83: #define ETHERMIN (ETHER_MIN_LEN - ETHER_HDR_LEN - ETHER_CRC_LEN)
84:
85: /*
86: * Ethernet CRC32 polynomials (big- and little-endian verions).
87: */
88: #define ETHER_CRC_POLY_LE 0xedb88320
89: #define ETHER_CRC_POLY_BE 0x04c11db6
90:
91: /*
92: * Ethernet-specific mbuf flags.
93: */
94: #define M_HASFCS M_LINK0 /* FCS included at end of frame */
95:
96: #ifdef _KERNEL
97: /*
98: * Macro to map an IP multicast address to an Ethernet multicast address.
99: * The high-order 25 bits of the Ethernet address are statically assigned,
100: * and the low-order 23 bits are taken from the low end of the IP address.
101: */
102: #define ETHER_MAP_IP_MULTICAST(ipaddr, enaddr) \
103: /* struct in_addr *ipaddr; */ \
104: /* u_int8_t enaddr[ETHER_ADDR_LEN]; */ \
105: { \
106: (enaddr)[0] = 0x01; \
107: (enaddr)[1] = 0x00; \
108: (enaddr)[2] = 0x5e; \
109: (enaddr)[3] = ((u_int8_t *)ipaddr)[1] & 0x7f; \
110: (enaddr)[4] = ((u_int8_t *)ipaddr)[2]; \
111: (enaddr)[5] = ((u_int8_t *)ipaddr)[3]; \
112: }
113:
114: /*
115: * Macro to map an IPv6 multicast address to an Ethernet multicast address.
116: * The high-order 16 bits of the Ethernet address are statically assigned,
117: * and the low-order 32 bits are taken from the low end of the IPv6 address.
118: */
119: #define ETHER_MAP_IPV6_MULTICAST(ip6addr, enaddr) \
120: /* struct in6_addr *ip6addr; */ \
121: /* u_int8_t enaddr[ETHER_ADDR_LEN]; */ \
122: { \
123: (enaddr)[0] = 0x33; \
124: (enaddr)[1] = 0x33; \
125: (enaddr)[2] = ((u_int8_t *)ip6addr)[12]; \
126: (enaddr)[3] = ((u_int8_t *)ip6addr)[13]; \
127: (enaddr)[4] = ((u_int8_t *)ip6addr)[14]; \
128: (enaddr)[5] = ((u_int8_t *)ip6addr)[15]; \
129: }
130: #endif
131:
132: /*
133: * Ethernet Address Resolution Protocol.
134: *
135: * See RFC 826 for protocol description. Structure below is adapted
136: * to resolving internet addresses. Field names used correspond to
137: * RFC 826.
138: */
139: struct ether_arp {
140: struct arphdr ea_hdr; /* fixed-size header */
141: u_int8_t arp_sha[ETHER_ADDR_LEN]; /* sender hardware address */
142: u_int8_t arp_spa[4]; /* sender protocol address */
143: u_int8_t arp_tha[ETHER_ADDR_LEN]; /* target hardware address */
144: u_int8_t arp_tpa[4]; /* target protocol address */
145: };
146: #define arp_hrd ea_hdr.ar_hrd
147: #define arp_pro ea_hdr.ar_pro
148: #define arp_hln ea_hdr.ar_hln
149: #define arp_pln ea_hdr.ar_pln
150: #define arp_op ea_hdr.ar_op
151:
152: /*
153: * Structure shared between the ethernet driver modules and
154: * the address resolution code. For example, each ec_softc or il_softc
155: * begins with this structure.
156: */
157: struct arpcom {
158: struct ifnet ac_if; /* network-visible interface */
159: u_int8_t ac_enaddr[ETHER_ADDR_LEN]; /* ethernet hardware address */
160: char ac__pad[2]; /* pad for some machines */
161: LIST_HEAD(, ether_multi) ac_multiaddrs; /* list of multicast addrs */
162: int ac_multicnt; /* length of ac_multiaddrs */
163: int ac_multirangecnt; /* number of mcast ranges */
164:
165: };
166:
167: struct llinfo_arp {
168: LIST_ENTRY(llinfo_arp) la_list;
169: struct rtentry *la_rt;
170: struct mbuf *la_hold; /* last packet until resolved/timeout */
171: long la_asked; /* last time we QUERIED for this addr */
172: #define la_timer la_rt->rt_rmx.rmx_expire /* deletion time in seconds */
173: };
174:
175: struct sockaddr_inarp {
176: u_int8_t sin_len;
177: u_int8_t sin_family;
178: u_int16_t sin_port;
179: struct in_addr sin_addr;
180: struct in_addr sin_srcaddr;
181: u_int16_t sin_tos;
182: u_int16_t sin_other;
183: #define SIN_PROXY 1
184: };
185:
186: /*
187: * IP and ethernet specific routing flags
188: */
189: #define RTF_USETRAILERS RTF_PROTO1 /* use trailers */
190: #define RTF_ANNOUNCE RTF_PROTO2 /* announce new arp entry */
191: #define RTF_PERMANENT_ARP RTF_PROTO3 /* only manual overwrite of entry */
192:
193: #ifdef _KERNEL
194: extern u_int8_t etherbroadcastaddr[ETHER_ADDR_LEN];
195: extern u_int8_t ether_ipmulticast_min[ETHER_ADDR_LEN];
196: extern u_int8_t ether_ipmulticast_max[ETHER_ADDR_LEN];
197: extern struct ifqueue arpintrq;
198:
199: void arpwhohas(struct arpcom *, struct in_addr *);
200: void arpintr(void);
201: int arpresolve(struct arpcom *,
202: struct rtentry *, struct mbuf *, struct sockaddr *, u_char *);
203: void arp_ifinit(struct arpcom *, struct ifaddr *);
204: void arp_rtrequest(int, struct rtentry *, struct rt_addrinfo *);
205:
206: int ether_addmulti(struct ifreq *, struct arpcom *);
207: int ether_delmulti(struct ifreq *, struct arpcom *);
208: int ether_multiaddr(struct sockaddr *, u_int8_t[], u_int8_t[]);
209: #endif /* _KERNEL */
210:
211: /*
212: * Ethernet multicast address structure. There is one of these for each
213: * multicast address or range of multicast addresses that we are supposed
214: * to listen to on a particular interface. They are kept in a linked list,
215: * rooted in the interface's arpcom structure. (This really has nothing to
216: * do with ARP, or with the Internet address family, but this appears to be
217: * the minimally-disrupting place to put it.)
218: */
219: struct ether_multi {
220: u_int8_t enm_addrlo[ETHER_ADDR_LEN]; /* low or only address of range */
221: u_int8_t enm_addrhi[ETHER_ADDR_LEN]; /* high or only address of range */
222: struct arpcom *enm_ac; /* back pointer to arpcom */
223: u_int enm_refcount; /* no. claims to this addr/range */
224: LIST_ENTRY(ether_multi) enm_list;
225: };
226:
227: /*
228: * Structure used by macros below to remember position when stepping through
229: * all of the ether_multi records.
230: */
231: struct ether_multistep {
232: struct ether_multi *e_enm;
233: };
234:
235: /*
236: * Macro for looking up the ether_multi record for a given range of Ethernet
237: * multicast addresses connected to a given arpcom structure. If no matching
238: * record is found, "enm" returns NULL.
239: */
240: #define ETHER_LOOKUP_MULTI(addrlo, addrhi, ac, enm) \
241: /* u_int8_t addrlo[ETHER_ADDR_LEN]; */ \
242: /* u_int8_t addrhi[ETHER_ADDR_LEN]; */ \
243: /* struct arpcom *ac; */ \
244: /* struct ether_multi *enm; */ \
245: { \
246: for ((enm) = LIST_FIRST(&(ac)->ac_multiaddrs); \
247: (enm) != LIST_END(&(ac)->ac_multiaddrs) && \
248: (bcmp((enm)->enm_addrlo, (addrlo), ETHER_ADDR_LEN) != 0 || \
249: bcmp((enm)->enm_addrhi, (addrhi), ETHER_ADDR_LEN) != 0); \
250: (enm) = LIST_NEXT((enm), enm_list)); \
251: }
252:
253: /*
254: * Macro to step through all of the ether_multi records, one at a time.
255: * The current position is remembered in "step", which the caller must
256: * provide. ETHER_FIRST_MULTI(), below, must be called to initialize "step"
257: * and get the first record. Both macros return a NULL "enm" when there
258: * are no remaining records.
259: */
260: #define ETHER_NEXT_MULTI(step, enm) \
261: /* struct ether_multistep step; */ \
262: /* struct ether_multi *enm; */ \
263: { \
264: if (((enm) = (step).e_enm) != NULL) \
265: (step).e_enm = LIST_NEXT((enm), enm_list); \
266: }
267:
268: #define ETHER_FIRST_MULTI(step, ac, enm) \
269: /* struct ether_multistep step; */ \
270: /* struct arpcom *ac; */ \
271: /* struct ether_multi *enm; */ \
272: { \
273: (step).e_enm = LIST_FIRST(&(ac)->ac_multiaddrs); \
274: ETHER_NEXT_MULTI((step), (enm)); \
275: }
276:
277: #ifdef _KERNEL
278:
279: extern struct ifnet *myip_ifp;
280:
281: int arpioctl(u_long, caddr_t);
282: void arprequest(struct ifnet *, u_int32_t *, u_int32_t *, u_int8_t *);
283: void revarpinput(struct mbuf *);
284: void in_revarpinput(struct mbuf *);
285: void revarprequest(struct ifnet *);
286: int revarpwhoarewe(struct ifnet *, struct in_addr *, struct in_addr *);
287: int revarpwhoami(struct in_addr *, struct ifnet *);
288: int db_show_arptab(void);
289:
290: u_int32_t ether_crc32_le(const u_int8_t *, size_t);
291: u_int32_t ether_crc32_be(const u_int8_t *, size_t);
292:
293: #else
294:
295: __BEGIN_DECLS
296: char *ether_ntoa(struct ether_addr *);
297: struct ether_addr *ether_aton(const char *);
298: int ether_ntohost(char *, struct ether_addr *);
299: int ether_hostton(const char *, struct ether_addr *);
300: int ether_line(const char *, struct ether_addr *, char *);
301: __END_DECLS
302:
303: #endif /* _KERNEL */
304: #endif /* _NETINET_IF_ETHER_H_ */
CVSweb