Annotation of sys/uvm/uvm_vnode.c, Revision 1.1
1.1 ! nbrk 1: /* $OpenBSD: uvm_vnode.c,v 1.49 2007/06/05 00:38:24 deraadt Exp $ */
! 2: /* $NetBSD: uvm_vnode.c,v 1.36 2000/11/24 20:34:01 chs Exp $ */
! 3:
! 4: /*
! 5: * Copyright (c) 1997 Charles D. Cranor and Washington University.
! 6: * Copyright (c) 1991, 1993
! 7: * The Regents of the University of California.
! 8: * Copyright (c) 1990 University of Utah.
! 9: *
! 10: * All rights reserved.
! 11: *
! 12: * This code is derived from software contributed to Berkeley by
! 13: * the Systems Programming Group of the University of Utah Computer
! 14: * Science Department.
! 15: *
! 16: * Redistribution and use in source and binary forms, with or without
! 17: * modification, are permitted provided that the following conditions
! 18: * are met:
! 19: * 1. Redistributions of source code must retain the above copyright
! 20: * notice, this list of conditions and the following disclaimer.
! 21: * 2. Redistributions in binary form must reproduce the above copyright
! 22: * notice, this list of conditions and the following disclaimer in the
! 23: * documentation and/or other materials provided with the distribution.
! 24: * 3. All advertising materials mentioning features or use of this software
! 25: * must display the following acknowledgement:
! 26: * This product includes software developed by Charles D. Cranor,
! 27: * Washington University, the University of California, Berkeley and
! 28: * its contributors.
! 29: * 4. Neither the name of the University nor the names of its contributors
! 30: * may be used to endorse or promote products derived from this software
! 31: * without specific prior written permission.
! 32: *
! 33: * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
! 34: * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
! 35: * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
! 36: * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
! 37: * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
! 38: * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
! 39: * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
! 40: * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
! 41: * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
! 42: * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
! 43: * SUCH DAMAGE.
! 44: *
! 45: * @(#)vnode_pager.c 8.8 (Berkeley) 2/13/94
! 46: * from: Id: uvm_vnode.c,v 1.1.2.26 1998/02/02 20:38:07 chuck Exp
! 47: */
! 48:
! 49: /*
! 50: * uvm_vnode.c: the vnode pager.
! 51: */
! 52:
! 53: #include <sys/param.h>
! 54: #include <sys/systm.h>
! 55: #include <sys/proc.h>
! 56: #include <sys/malloc.h>
! 57: #include <sys/vnode.h>
! 58: #include <sys/disklabel.h>
! 59: #include <sys/ioctl.h>
! 60: #include <sys/fcntl.h>
! 61: #include <sys/conf.h>
! 62: #include <sys/rwlock.h>
! 63:
! 64: #include <miscfs/specfs/specdev.h>
! 65:
! 66: #include <uvm/uvm.h>
! 67: #include <uvm/uvm_vnode.h>
! 68:
! 69: /*
! 70: * private global data structure
! 71: *
! 72: * we keep a list of writeable active vnode-backed VM objects for sync op.
! 73: * we keep a simpleq of vnodes that are currently being sync'd.
! 74: */
! 75:
! 76: LIST_HEAD(uvn_list_struct, uvm_vnode);
! 77: struct uvn_list_struct uvn_wlist; /* writeable uvns */
! 78:
! 79: SIMPLEQ_HEAD(uvn_sq_struct, uvm_vnode);
! 80: struct uvn_sq_struct uvn_sync_q; /* sync'ing uvns */
! 81: struct rwlock uvn_sync_lock; /* locks sync operation */
! 82:
! 83: /*
! 84: * functions
! 85: */
! 86:
! 87: void uvn_cluster(struct uvm_object *, voff_t,
! 88: voff_t *, voff_t *);
! 89: void uvn_detach(struct uvm_object *);
! 90: boolean_t uvn_flush(struct uvm_object *, voff_t,
! 91: voff_t, int);
! 92: int uvn_get(struct uvm_object *, voff_t,
! 93: vm_page_t *, int *, int,
! 94: vm_prot_t, int, int);
! 95: void uvn_init(void);
! 96: int uvn_io(struct uvm_vnode *, vm_page_t *,
! 97: int, int, int);
! 98: int uvn_put(struct uvm_object *, vm_page_t *,
! 99: int, boolean_t);
! 100: void uvn_reference(struct uvm_object *);
! 101: boolean_t uvn_releasepg(struct vm_page *,
! 102: struct vm_page **);
! 103:
! 104: /*
! 105: * master pager structure
! 106: */
! 107:
! 108: struct uvm_pagerops uvm_vnodeops = {
! 109: uvn_init,
! 110: uvn_reference,
! 111: uvn_detach,
! 112: NULL, /* no specialized fault routine required */
! 113: uvn_flush,
! 114: uvn_get,
! 115: uvn_put,
! 116: uvn_cluster,
! 117: uvm_mk_pcluster, /* use generic version of this: see uvm_pager.c */
! 118: uvn_releasepg,
! 119: };
! 120:
! 121: /*
! 122: * the ops!
! 123: */
! 124:
! 125: /*
! 126: * uvn_init
! 127: *
! 128: * init pager private data structures.
! 129: */
! 130:
! 131: void
! 132: uvn_init(void)
! 133: {
! 134:
! 135: LIST_INIT(&uvn_wlist);
! 136: /* note: uvn_sync_q init'd in uvm_vnp_sync() */
! 137: rw_init(&uvn_sync_lock, "uvnsync");
! 138: }
! 139:
! 140: /*
! 141: * uvn_attach
! 142: *
! 143: * attach a vnode structure to a VM object. if the vnode is already
! 144: * attached, then just bump the reference count by one and return the
! 145: * VM object. if not already attached, attach and return the new VM obj.
! 146: * the "accessprot" tells the max access the attaching thread wants to
! 147: * our pages.
! 148: *
! 149: * => caller must _not_ already be holding the lock on the uvm_object.
! 150: * => in fact, nothing should be locked so that we can sleep here.
! 151: * => note that uvm_object is first thing in vnode structure, so their
! 152: * pointers are equiv.
! 153: */
! 154:
! 155: struct uvm_object *
! 156: uvn_attach(arg, accessprot)
! 157: void *arg;
! 158: vm_prot_t accessprot;
! 159: {
! 160: struct vnode *vp = arg;
! 161: struct uvm_vnode *uvn = &vp->v_uvm;
! 162: struct vattr vattr;
! 163: int oldflags, result;
! 164: struct partinfo pi;
! 165: u_quad_t used_vnode_size;
! 166: UVMHIST_FUNC("uvn_attach"); UVMHIST_CALLED(maphist);
! 167:
! 168: UVMHIST_LOG(maphist, "(vn=%p)", arg,0,0,0);
! 169:
! 170: used_vnode_size = (u_quad_t)0; /* XXX gcc -Wuninitialized */
! 171:
! 172: /*
! 173: * first get a lock on the uvn.
! 174: */
! 175: simple_lock(&uvn->u_obj.vmobjlock);
! 176: while (uvn->u_flags & UVM_VNODE_BLOCKED) {
! 177: printf("uvn_attach: blocked at %p flags 0x%x\n",
! 178: uvn, uvn->u_flags);
! 179: uvn->u_flags |= UVM_VNODE_WANTED;
! 180: UVMHIST_LOG(maphist, " SLEEPING on blocked vn",0,0,0,0);
! 181: UVM_UNLOCK_AND_WAIT(uvn, &uvn->u_obj.vmobjlock, FALSE,
! 182: "uvn_attach", 0);
! 183: simple_lock(&uvn->u_obj.vmobjlock);
! 184: UVMHIST_LOG(maphist," WOKE UP",0,0,0,0);
! 185: }
! 186:
! 187: /*
! 188: * if we're mapping a BLK device, make sure it is a disk.
! 189: */
! 190: if (vp->v_type == VBLK && bdevsw[major(vp->v_rdev)].d_type != D_DISK) {
! 191: simple_unlock(&uvn->u_obj.vmobjlock); /* drop lock */
! 192: UVMHIST_LOG(maphist,"<- done (VBLK not D_DISK!)", 0,0,0,0);
! 193: return(NULL);
! 194: }
! 195:
! 196: /*
! 197: * now we have lock and uvn must not be in a blocked state.
! 198: * first check to see if it is already active, in which case
! 199: * we can bump the reference count, check to see if we need to
! 200: * add it to the writeable list, and then return.
! 201: */
! 202: if (uvn->u_flags & UVM_VNODE_VALID) { /* already active? */
! 203:
! 204: /* regain VREF if we were persisting */
! 205: if (uvn->u_obj.uo_refs == 0) {
! 206: VREF(vp);
! 207: UVMHIST_LOG(maphist," VREF (reclaim persisting vnode)",
! 208: 0,0,0,0);
! 209: }
! 210: uvn->u_obj.uo_refs++; /* bump uvn ref! */
! 211:
! 212: /* check for new writeable uvn */
! 213: if ((accessprot & VM_PROT_WRITE) != 0 &&
! 214: (uvn->u_flags & UVM_VNODE_WRITEABLE) == 0) {
! 215: LIST_INSERT_HEAD(&uvn_wlist, uvn, u_wlist);
! 216: /* we are now on wlist! */
! 217: uvn->u_flags |= UVM_VNODE_WRITEABLE;
! 218: }
! 219:
! 220: /* unlock and return */
! 221: simple_unlock(&uvn->u_obj.vmobjlock);
! 222: UVMHIST_LOG(maphist,"<- done, refcnt=%ld", uvn->u_obj.uo_refs,
! 223: 0, 0, 0);
! 224: return (&uvn->u_obj);
! 225: }
! 226:
! 227: /*
! 228: * need to call VOP_GETATTR() to get the attributes, but that could
! 229: * block (due to I/O), so we want to unlock the object before calling.
! 230: * however, we want to keep anyone else from playing with the object
! 231: * while it is unlocked. to do this we set UVM_VNODE_ALOCK which
! 232: * prevents anyone from attaching to the vnode until we are done with
! 233: * it.
! 234: */
! 235: uvn->u_flags = UVM_VNODE_ALOCK;
! 236: simple_unlock(&uvn->u_obj.vmobjlock); /* drop lock in case we sleep */
! 237: /* XXX: curproc? */
! 238:
! 239: if (vp->v_type == VBLK) {
! 240: /*
! 241: * We could implement this as a specfs getattr call, but:
! 242: *
! 243: * (1) VOP_GETATTR() would get the file system
! 244: * vnode operation, not the specfs operation.
! 245: *
! 246: * (2) All we want is the size, anyhow.
! 247: */
! 248: result = (*bdevsw[major(vp->v_rdev)].d_ioctl)(vp->v_rdev,
! 249: DIOCGPART, (caddr_t)&pi, FREAD, curproc);
! 250: if (result == 0) {
! 251: /* XXX should remember blocksize */
! 252: used_vnode_size = (u_quad_t)pi.disklab->d_secsize *
! 253: (u_quad_t)DL_GETPSIZE(pi.part);
! 254: }
! 255: } else {
! 256: result = VOP_GETATTR(vp, &vattr, curproc->p_ucred, curproc);
! 257: if (result == 0)
! 258: used_vnode_size = vattr.va_size;
! 259: }
! 260:
! 261: /* relock object */
! 262: simple_lock(&uvn->u_obj.vmobjlock);
! 263:
! 264: if (result != 0) {
! 265: if (uvn->u_flags & UVM_VNODE_WANTED)
! 266: wakeup(uvn);
! 267: uvn->u_flags = 0;
! 268: simple_unlock(&uvn->u_obj.vmobjlock); /* drop lock */
! 269: UVMHIST_LOG(maphist,"<- done (VOP_GETATTR FAILED!)", 0,0,0,0);
! 270: return(NULL);
! 271: }
! 272:
! 273: /*
! 274: * make sure that the newsize fits within a vaddr_t
! 275: * XXX: need to revise addressing data types
! 276: */
! 277: #ifdef DEBUG
! 278: if (vp->v_type == VBLK)
! 279: printf("used_vnode_size = %llu\n", (long long)used_vnode_size);
! 280: #endif
! 281:
! 282: /*
! 283: * now set up the uvn.
! 284: */
! 285: uvn->u_obj.pgops = &uvm_vnodeops;
! 286: TAILQ_INIT(&uvn->u_obj.memq);
! 287: uvn->u_obj.uo_npages = 0;
! 288: uvn->u_obj.uo_refs = 1; /* just us... */
! 289: oldflags = uvn->u_flags;
! 290: uvn->u_flags = UVM_VNODE_VALID|UVM_VNODE_CANPERSIST;
! 291: uvn->u_nio = 0;
! 292: uvn->u_size = used_vnode_size;
! 293:
! 294: /* if write access, we need to add it to the wlist */
! 295: if (accessprot & VM_PROT_WRITE) {
! 296: LIST_INSERT_HEAD(&uvn_wlist, uvn, u_wlist);
! 297: uvn->u_flags |= UVM_VNODE_WRITEABLE; /* we are on wlist! */
! 298: }
! 299:
! 300: /*
! 301: * add a reference to the vnode. this reference will stay as long
! 302: * as there is a valid mapping of the vnode. dropped when the
! 303: * reference count goes to zero [and we either free or persist].
! 304: */
! 305: VREF(vp);
! 306: simple_unlock(&uvn->u_obj.vmobjlock);
! 307: if (oldflags & UVM_VNODE_WANTED)
! 308: wakeup(uvn);
! 309:
! 310: UVMHIST_LOG(maphist,"<- done/VREF, ret %p", &uvn->u_obj,0,0,0);
! 311: return(&uvn->u_obj);
! 312: }
! 313:
! 314:
! 315: /*
! 316: * uvn_reference
! 317: *
! 318: * duplicate a reference to a VM object. Note that the reference
! 319: * count must already be at least one (the passed in reference) so
! 320: * there is no chance of the uvn being killed or locked out here.
! 321: *
! 322: * => caller must call with object unlocked.
! 323: * => caller must be using the same accessprot as was used at attach time
! 324: */
! 325:
! 326:
! 327: void
! 328: uvn_reference(uobj)
! 329: struct uvm_object *uobj;
! 330: {
! 331: #ifdef DEBUG
! 332: struct uvm_vnode *uvn = (struct uvm_vnode *) uobj;
! 333: #endif
! 334: UVMHIST_FUNC("uvn_reference"); UVMHIST_CALLED(maphist);
! 335:
! 336: simple_lock(&uobj->vmobjlock);
! 337: #ifdef DEBUG
! 338: if ((uvn->u_flags & UVM_VNODE_VALID) == 0) {
! 339: printf("uvn_reference: ref=%d, flags=0x%x\n", uvn->u_flags,
! 340: uobj->uo_refs);
! 341: panic("uvn_reference: invalid state");
! 342: }
! 343: #endif
! 344: uobj->uo_refs++;
! 345: UVMHIST_LOG(maphist, "<- done (uobj=%p, ref = %ld)",
! 346: uobj, uobj->uo_refs,0,0);
! 347: simple_unlock(&uobj->vmobjlock);
! 348: }
! 349:
! 350: /*
! 351: * uvn_detach
! 352: *
! 353: * remove a reference to a VM object.
! 354: *
! 355: * => caller must call with object unlocked and map locked.
! 356: * => this starts the detach process, but doesn't have to finish it
! 357: * (async i/o could still be pending).
! 358: */
! 359: void
! 360: uvn_detach(uobj)
! 361: struct uvm_object *uobj;
! 362: {
! 363: struct uvm_vnode *uvn;
! 364: struct vnode *vp;
! 365: int oldflags;
! 366: UVMHIST_FUNC("uvn_detach"); UVMHIST_CALLED(maphist);
! 367:
! 368: simple_lock(&uobj->vmobjlock);
! 369:
! 370: UVMHIST_LOG(maphist," (uobj=%p) ref=%ld", uobj,uobj->uo_refs,0,0);
! 371: uobj->uo_refs--; /* drop ref! */
! 372: if (uobj->uo_refs) { /* still more refs */
! 373: simple_unlock(&uobj->vmobjlock);
! 374: UVMHIST_LOG(maphist, "<- done (rc>0)", 0,0,0,0);
! 375: return;
! 376: }
! 377:
! 378: /*
! 379: * get other pointers ...
! 380: */
! 381:
! 382: uvn = (struct uvm_vnode *) uobj;
! 383: vp = (struct vnode *) uobj;
! 384:
! 385: /*
! 386: * clear VTEXT flag now that there are no mappings left (VTEXT is used
! 387: * to keep an active text file from being overwritten).
! 388: */
! 389: vp->v_flag &= ~VTEXT;
! 390:
! 391: /*
! 392: * we just dropped the last reference to the uvn. see if we can
! 393: * let it "stick around".
! 394: */
! 395:
! 396: if (uvn->u_flags & UVM_VNODE_CANPERSIST) {
! 397: /* won't block */
! 398: uvn_flush(uobj, 0, 0, PGO_DEACTIVATE|PGO_ALLPAGES);
! 399: simple_unlock(&uobj->vmobjlock);
! 400: vrele(vp); /* drop vnode reference */
! 401: UVMHIST_LOG(maphist,"<- done/vrele! (persist)", 0,0,0,0);
! 402: return;
! 403: }
! 404:
! 405: /*
! 406: * its a goner!
! 407: */
! 408:
! 409: UVMHIST_LOG(maphist," its a goner (flushing)!", 0,0,0,0);
! 410:
! 411: uvn->u_flags |= UVM_VNODE_DYING;
! 412:
! 413: /*
! 414: * even though we may unlock in flush, no one can gain a reference
! 415: * to us until we clear the "dying" flag [because it blocks
! 416: * attaches]. we will not do that until after we've disposed of all
! 417: * the pages with uvn_flush(). note that before the flush the only
! 418: * pages that could be marked PG_BUSY are ones that are in async
! 419: * pageout by the daemon. (there can't be any pending "get"'s
! 420: * because there are no references to the object).
! 421: */
! 422:
! 423: (void) uvn_flush(uobj, 0, 0, PGO_CLEANIT|PGO_FREE|PGO_ALLPAGES);
! 424:
! 425: UVMHIST_LOG(maphist," its a goner (done flush)!", 0,0,0,0);
! 426:
! 427: /*
! 428: * given the structure of this pager, the above flush request will
! 429: * create the following state: all the pages that were in the object
! 430: * have either been free'd or they are marked PG_BUSY|PG_RELEASED.
! 431: * the PG_BUSY bit was set either by us or the daemon for async I/O.
! 432: * in either case, if we have pages left we can't kill the object
! 433: * yet because i/o is pending. in this case we set the "relkill"
! 434: * flag which will cause pgo_releasepg to kill the object once all
! 435: * the I/O's are done [pgo_releasepg will be called from the aiodone
! 436: * routine or from the page daemon].
! 437: */
! 438:
! 439: if (uobj->uo_npages) { /* I/O pending. iodone will free */
! 440: #ifdef DEBUG
! 441: /*
! 442: * XXXCDC: very unlikely to happen until we have async i/o
! 443: * so print a little info message in case it does.
! 444: */
! 445: printf("uvn_detach: vn %p has pages left after flush - "
! 446: "relkill mode\n", uobj);
! 447: #endif
! 448: uvn->u_flags |= UVM_VNODE_RELKILL;
! 449: simple_unlock(&uobj->vmobjlock);
! 450: UVMHIST_LOG(maphist,"<- done! (releasepg will kill obj)", 0, 0,
! 451: 0, 0);
! 452: return;
! 453: }
! 454:
! 455: /*
! 456: * kill object now. note that we can't be on the sync q because
! 457: * all references are gone.
! 458: */
! 459: if (uvn->u_flags & UVM_VNODE_WRITEABLE) {
! 460: LIST_REMOVE(uvn, u_wlist);
! 461: }
! 462: #ifdef DIAGNOSTIC
! 463: if (!TAILQ_EMPTY(&uobj->memq))
! 464: panic("uvn_deref: vnode VM object still has pages afer "
! 465: "syncio/free flush");
! 466: #endif
! 467: oldflags = uvn->u_flags;
! 468: uvn->u_flags = 0;
! 469: simple_unlock(&uobj->vmobjlock);
! 470:
! 471: /* wake up any sleepers */
! 472: if (oldflags & UVM_VNODE_WANTED)
! 473: wakeup(uvn);
! 474:
! 475: /*
! 476: * drop our reference to the vnode.
! 477: */
! 478: vrele(vp);
! 479: UVMHIST_LOG(maphist,"<- done (vrele) final", 0,0,0,0);
! 480:
! 481: return;
! 482: }
! 483:
! 484: /*
! 485: * uvm_vnp_terminate: external hook to clear out a vnode's VM
! 486: *
! 487: * called in two cases:
! 488: * [1] when a persisting vnode vm object (i.e. one with a zero reference
! 489: * count) needs to be freed so that a vnode can be reused. this
! 490: * happens under "getnewvnode" in vfs_subr.c. if the vnode from
! 491: * the free list is still attached (i.e. not VBAD) then vgone is
! 492: * called. as part of the vgone trace this should get called to
! 493: * free the vm object. this is the common case.
! 494: * [2] when a filesystem is being unmounted by force (MNT_FORCE,
! 495: * "umount -f") the vgone() function is called on active vnodes
! 496: * on the mounted file systems to kill their data (the vnodes become
! 497: * "dead" ones [see src/sys/miscfs/deadfs/...]). that results in a
! 498: * call here (even if the uvn is still in use -- i.e. has a non-zero
! 499: * reference count). this case happens at "umount -f" and during a
! 500: * "reboot/halt" operation.
! 501: *
! 502: * => the caller must XLOCK and VOP_LOCK the vnode before calling us
! 503: * [protects us from getting a vnode that is already in the DYING
! 504: * state...]
! 505: * => unlike uvn_detach, this function must not return until all the
! 506: * uvn's pages are disposed of.
! 507: * => in case [2] the uvn is still alive after this call, but all I/O
! 508: * ops will fail (due to the backing vnode now being "dead"). this
! 509: * will prob. kill any process using the uvn due to pgo_get failing.
! 510: */
! 511:
! 512: void
! 513: uvm_vnp_terminate(vp)
! 514: struct vnode *vp;
! 515: {
! 516: struct uvm_vnode *uvn = &vp->v_uvm;
! 517: int oldflags;
! 518: UVMHIST_FUNC("uvm_vnp_terminate"); UVMHIST_CALLED(maphist);
! 519:
! 520: /*
! 521: * lock object and check if it is valid
! 522: */
! 523: simple_lock(&uvn->u_obj.vmobjlock);
! 524: UVMHIST_LOG(maphist, " vp=%p, ref=%ld, flag=0x%lx", vp,
! 525: uvn->u_obj.uo_refs, uvn->u_flags, 0);
! 526: if ((uvn->u_flags & UVM_VNODE_VALID) == 0) {
! 527: simple_unlock(&uvn->u_obj.vmobjlock);
! 528: UVMHIST_LOG(maphist, "<- done (not active)", 0, 0, 0, 0);
! 529: return;
! 530: }
! 531:
! 532: /*
! 533: * must be a valid uvn that is not already dying (because XLOCK
! 534: * protects us from that). the uvn can't in the ALOCK state
! 535: * because it is valid, and uvn's that are in the ALOCK state haven't
! 536: * been marked valid yet.
! 537: */
! 538:
! 539: #ifdef DEBUG
! 540: /*
! 541: * debug check: are we yanking the vnode out from under our uvn?
! 542: */
! 543: if (uvn->u_obj.uo_refs) {
! 544: printf("uvm_vnp_terminate(%p): terminating active vnode "
! 545: "(refs=%d)\n", uvn, uvn->u_obj.uo_refs);
! 546: }
! 547: #endif
! 548:
! 549: /*
! 550: * it is possible that the uvn was detached and is in the relkill
! 551: * state [i.e. waiting for async i/o to finish so that releasepg can
! 552: * kill object]. we take over the vnode now and cancel the relkill.
! 553: * we want to know when the i/o is done so we can recycle right
! 554: * away. note that a uvn can only be in the RELKILL state if it
! 555: * has a zero reference count.
! 556: */
! 557:
! 558: if (uvn->u_flags & UVM_VNODE_RELKILL)
! 559: uvn->u_flags &= ~UVM_VNODE_RELKILL; /* cancel RELKILL */
! 560:
! 561: /*
! 562: * block the uvn by setting the dying flag, and then flush the
! 563: * pages. (note that flush may unlock object while doing I/O, but
! 564: * it will re-lock it before it returns control here).
! 565: *
! 566: * also, note that we tell I/O that we are already VOP_LOCK'd so
! 567: * that uvn_io doesn't attempt to VOP_LOCK again.
! 568: *
! 569: * XXXCDC: setting VNISLOCKED on an active uvn which is being terminated
! 570: * due to a forceful unmount might not be a good idea. maybe we
! 571: * need a way to pass in this info to uvn_flush through a
! 572: * pager-defined PGO_ constant [currently there are none].
! 573: */
! 574: uvn->u_flags |= UVM_VNODE_DYING|UVM_VNODE_VNISLOCKED;
! 575:
! 576: (void) uvn_flush(&uvn->u_obj, 0, 0, PGO_CLEANIT|PGO_FREE|PGO_ALLPAGES);
! 577:
! 578: /*
! 579: * as we just did a flush we expect all the pages to be gone or in
! 580: * the process of going. sleep to wait for the rest to go [via iosync].
! 581: */
! 582:
! 583: while (uvn->u_obj.uo_npages) {
! 584: #ifdef DEBUG
! 585: struct vm_page *pp;
! 586: TAILQ_FOREACH(pp, &uvn->u_obj.memq, listq) {
! 587: if ((pp->pg_flags & PG_BUSY) == 0)
! 588: panic("uvm_vnp_terminate: detected unbusy pg");
! 589: }
! 590: if (uvn->u_nio == 0)
! 591: panic("uvm_vnp_terminate: no I/O to wait for?");
! 592: printf("uvm_vnp_terminate: waiting for I/O to fin.\n");
! 593: /*
! 594: * XXXCDC: this is unlikely to happen without async i/o so we
! 595: * put a printf in just to keep an eye on it.
! 596: */
! 597: #endif
! 598: uvn->u_flags |= UVM_VNODE_IOSYNC;
! 599: UVM_UNLOCK_AND_WAIT(&uvn->u_nio, &uvn->u_obj.vmobjlock, FALSE,
! 600: "uvn_term",0);
! 601: simple_lock(&uvn->u_obj.vmobjlock);
! 602: }
! 603:
! 604: /*
! 605: * done. now we free the uvn if its reference count is zero
! 606: * (true if we are zapping a persisting uvn). however, if we are
! 607: * terminating a uvn with active mappings we let it live ... future
! 608: * calls down to the vnode layer will fail.
! 609: */
! 610:
! 611: oldflags = uvn->u_flags;
! 612: if (uvn->u_obj.uo_refs) {
! 613:
! 614: /*
! 615: * uvn must live on it is dead-vnode state until all references
! 616: * are gone. restore flags. clear CANPERSIST state.
! 617: */
! 618:
! 619: uvn->u_flags &= ~(UVM_VNODE_DYING|UVM_VNODE_VNISLOCKED|
! 620: UVM_VNODE_WANTED|UVM_VNODE_CANPERSIST);
! 621:
! 622: } else {
! 623:
! 624: /*
! 625: * free the uvn now. note that the VREF reference is already
! 626: * gone [it is dropped when we enter the persist state].
! 627: */
! 628: if (uvn->u_flags & UVM_VNODE_IOSYNCWANTED)
! 629: panic("uvm_vnp_terminate: io sync wanted bit set");
! 630:
! 631: if (uvn->u_flags & UVM_VNODE_WRITEABLE) {
! 632: LIST_REMOVE(uvn, u_wlist);
! 633: }
! 634: uvn->u_flags = 0; /* uvn is history, clear all bits */
! 635: }
! 636:
! 637: if (oldflags & UVM_VNODE_WANTED)
! 638: wakeup(uvn); /* object lock still held */
! 639:
! 640: simple_unlock(&uvn->u_obj.vmobjlock);
! 641: UVMHIST_LOG(maphist, "<- done", 0, 0, 0, 0);
! 642:
! 643: }
! 644:
! 645: /*
! 646: * uvn_releasepg: handled a released page in a uvn
! 647: *
! 648: * => "pg" is a PG_BUSY [caller owns it], PG_RELEASED page that we need
! 649: * to dispose of.
! 650: * => caller must handled PG_WANTED case
! 651: * => called with page's object locked, pageq's unlocked
! 652: * => returns TRUE if page's object is still alive, FALSE if we
! 653: * killed the page's object. if we return TRUE, then we
! 654: * return with the object locked.
! 655: * => if (nextpgp != NULL) => we return pageq.tqe_next here, and return
! 656: * with the page queues locked [for pagedaemon]
! 657: * => if (nextpgp == NULL) => we return with page queues unlocked [normal case]
! 658: * => we kill the uvn if it is not referenced and we are suppose to
! 659: * kill it ("relkill").
! 660: */
! 661:
! 662: boolean_t
! 663: uvn_releasepg(pg, nextpgp)
! 664: struct vm_page *pg;
! 665: struct vm_page **nextpgp; /* OUT */
! 666: {
! 667: struct uvm_vnode *uvn = (struct uvm_vnode *) pg->uobject;
! 668: #ifdef DIAGNOSTIC
! 669: if ((pg->pg_flags & PG_RELEASED) == 0)
! 670: panic("uvn_releasepg: page not released!");
! 671: #endif
! 672:
! 673: /*
! 674: * dispose of the page [caller handles PG_WANTED]
! 675: */
! 676: pmap_page_protect(pg, VM_PROT_NONE);
! 677: uvm_lock_pageq();
! 678: if (nextpgp)
! 679: *nextpgp = TAILQ_NEXT(pg, pageq); /* next page for daemon */
! 680: uvm_pagefree(pg);
! 681: if (!nextpgp)
! 682: uvm_unlock_pageq();
! 683:
! 684: /*
! 685: * now see if we need to kill the object
! 686: */
! 687: if (uvn->u_flags & UVM_VNODE_RELKILL) {
! 688: if (uvn->u_obj.uo_refs)
! 689: panic("uvn_releasepg: kill flag set on referenced "
! 690: "object!");
! 691: if (uvn->u_obj.uo_npages == 0) {
! 692: if (uvn->u_flags & UVM_VNODE_WRITEABLE) {
! 693: LIST_REMOVE(uvn, u_wlist);
! 694: }
! 695: #ifdef DIAGNOSTIC
! 696: if (!TAILQ_EMPTY(&uvn->u_obj.memq))
! 697: panic("uvn_releasepg: pages in object with npages == 0");
! 698: #endif
! 699: if (uvn->u_flags & UVM_VNODE_WANTED)
! 700: /* still holding object lock */
! 701: wakeup(uvn);
! 702:
! 703: uvn->u_flags = 0; /* DEAD! */
! 704: simple_unlock(&uvn->u_obj.vmobjlock);
! 705: return (FALSE);
! 706: }
! 707: }
! 708: return (TRUE);
! 709: }
! 710:
! 711: /*
! 712: * NOTE: currently we have to use VOP_READ/VOP_WRITE because they go
! 713: * through the buffer cache and allow I/O in any size. These VOPs use
! 714: * synchronous i/o. [vs. VOP_STRATEGY which can be async, but doesn't
! 715: * go through the buffer cache or allow I/O sizes larger than a
! 716: * block]. we will eventually want to change this.
! 717: *
! 718: * issues to consider:
! 719: * uvm provides the uvm_aiodesc structure for async i/o management.
! 720: * there are two tailq's in the uvm. structure... one for pending async
! 721: * i/o and one for "done" async i/o. to do an async i/o one puts
! 722: * an aiodesc on the "pending" list (protected by splbio()), starts the
! 723: * i/o and returns VM_PAGER_PEND. when the i/o is done, we expect
! 724: * some sort of "i/o done" function to be called (at splbio(), interrupt
! 725: * time). this function should remove the aiodesc from the pending list
! 726: * and place it on the "done" list and wakeup the daemon. the daemon
! 727: * will run at normal spl() and will remove all items from the "done"
! 728: * list and call the "aiodone" hook for each done request (see uvm_pager.c).
! 729: * [in the old vm code, this was done by calling the "put" routine with
! 730: * null arguments which made the code harder to read and understand because
! 731: * you had one function ("put") doing two things.]
! 732: *
! 733: * so the current pager needs:
! 734: * int uvn_aiodone(struct uvm_aiodesc *)
! 735: *
! 736: * => return 0 (aio finished, free it). otherwise requeue for later collection.
! 737: * => called with pageq's locked by the daemon.
! 738: *
! 739: * general outline:
! 740: * - "try" to lock object. if fail, just return (will try again later)
! 741: * - drop "u_nio" (this req is done!)
! 742: * - if (object->iosync && u_naio == 0) { wakeup &uvn->u_naio }
! 743: * - get "page" structures (atop?).
! 744: * - handle "wanted" pages
! 745: * - handle "released" pages [using pgo_releasepg]
! 746: * >>> pgo_releasepg may kill the object
! 747: * dont forget to look at "object" wanted flag in all cases.
! 748: */
! 749:
! 750:
! 751: /*
! 752: * uvn_flush: flush pages out of a uvm object.
! 753: *
! 754: * => object should be locked by caller. we may _unlock_ the object
! 755: * if (and only if) we need to clean a page (PGO_CLEANIT).
! 756: * we return with the object locked.
! 757: * => if PGO_CLEANIT is set, we may block (due to I/O). thus, a caller
! 758: * might want to unlock higher level resources (e.g. vm_map)
! 759: * before calling flush.
! 760: * => if PGO_CLEANIT is not set, then we will neither unlock the object
! 761: * or block.
! 762: * => if PGO_ALLPAGE is set, then all pages in the object are valid targets
! 763: * for flushing.
! 764: * => NOTE: we rely on the fact that the object's memq is a TAILQ and
! 765: * that new pages are inserted on the tail end of the list. thus,
! 766: * we can make a complete pass through the object in one go by starting
! 767: * at the head and working towards the tail (new pages are put in
! 768: * front of us).
! 769: * => NOTE: we are allowed to lock the page queues, so the caller
! 770: * must not be holding the lock on them [e.g. pagedaemon had
! 771: * better not call us with the queues locked]
! 772: * => we return TRUE unless we encountered some sort of I/O error
! 773: *
! 774: * comment on "cleaning" object and PG_BUSY pages:
! 775: * this routine is holding the lock on the object. the only time
! 776: * that it can run into a PG_BUSY page that it does not own is if
! 777: * some other process has started I/O on the page (e.g. either
! 778: * a pagein, or a pageout). if the PG_BUSY page is being paged
! 779: * in, then it can not be dirty (!PG_CLEAN) because no one has
! 780: * had a chance to modify it yet. if the PG_BUSY page is being
! 781: * paged out then it means that someone else has already started
! 782: * cleaning the page for us (how nice!). in this case, if we
! 783: * have syncio specified, then after we make our pass through the
! 784: * object we need to wait for the other PG_BUSY pages to clear
! 785: * off (i.e. we need to do an iosync). also note that once a
! 786: * page is PG_BUSY it must stay in its object until it is un-busyed.
! 787: *
! 788: * note on page traversal:
! 789: * we can traverse the pages in an object either by going down the
! 790: * linked list in "uobj->memq", or we can go over the address range
! 791: * by page doing hash table lookups for each address. depending
! 792: * on how many pages are in the object it may be cheaper to do one
! 793: * or the other. we set "by_list" to true if we are using memq.
! 794: * if the cost of a hash lookup was equal to the cost of the list
! 795: * traversal we could compare the number of pages in the start->stop
! 796: * range to the total number of pages in the object. however, it
! 797: * seems that a hash table lookup is more expensive than the linked
! 798: * list traversal, so we multiply the number of pages in the
! 799: * start->stop range by a penalty which we define below.
! 800: */
! 801:
! 802: #define UVN_HASH_PENALTY 4 /* XXX: a guess */
! 803:
! 804: boolean_t
! 805: uvn_flush(uobj, start, stop, flags)
! 806: struct uvm_object *uobj;
! 807: voff_t start, stop;
! 808: int flags;
! 809: {
! 810: struct uvm_vnode *uvn = (struct uvm_vnode *) uobj;
! 811: struct vm_page *pp, *ppnext, *ptmp;
! 812: struct vm_page *pps[MAXBSIZE >> PAGE_SHIFT], **ppsp;
! 813: int npages, result, lcv;
! 814: boolean_t retval, need_iosync, by_list, needs_clean, all;
! 815: voff_t curoff;
! 816: u_short pp_version;
! 817: UVMHIST_FUNC("uvn_flush"); UVMHIST_CALLED(maphist);
! 818:
! 819: curoff = 0; /* XXX: shut up gcc */
! 820: /*
! 821: * get init vals and determine how we are going to traverse object
! 822: */
! 823:
! 824: need_iosync = FALSE;
! 825: retval = TRUE; /* return value */
! 826: if (flags & PGO_ALLPAGES) {
! 827: all = TRUE;
! 828: by_list = TRUE; /* always go by the list */
! 829: } else {
! 830: start = trunc_page(start);
! 831: stop = round_page(stop);
! 832: #ifdef DEBUG
! 833: if (stop > round_page(uvn->u_size))
! 834: printf("uvn_flush: strange, got an out of range "
! 835: "flush (fixed)\n");
! 836: #endif
! 837: all = FALSE;
! 838: by_list = (uobj->uo_npages <=
! 839: ((stop - start) >> PAGE_SHIFT) * UVN_HASH_PENALTY);
! 840: }
! 841:
! 842: UVMHIST_LOG(maphist,
! 843: " flush start=0x%lx, stop=0x%lx, by_list=%ld, flags=0x%lx",
! 844: (u_long)start, (u_long)stop, by_list, flags);
! 845:
! 846: /*
! 847: * PG_CLEANCHK: this bit is used by the pgo_mk_pcluster function as
! 848: * a _hint_ as to how up to date the PG_CLEAN bit is. if the hint
! 849: * is wrong it will only prevent us from clustering... it won't break
! 850: * anything. we clear all PG_CLEANCHK bits here, and pgo_mk_pcluster
! 851: * will set them as it syncs PG_CLEAN. This is only an issue if we
! 852: * are looking at non-inactive pages (because inactive page's PG_CLEAN
! 853: * bit is always up to date since there are no mappings).
! 854: * [borrowed PG_CLEANCHK idea from FreeBSD VM]
! 855: */
! 856:
! 857: if ((flags & PGO_CLEANIT) != 0 &&
! 858: uobj->pgops->pgo_mk_pcluster != NULL) {
! 859: if (by_list) {
! 860: TAILQ_FOREACH(pp, &uobj->memq, listq) {
! 861: if (!all &&
! 862: (pp->offset < start || pp->offset >= stop))
! 863: continue;
! 864: atomic_clearbits_int(&pp->pg_flags,
! 865: PG_CLEANCHK);
! 866: }
! 867:
! 868: } else { /* by hash */
! 869: for (curoff = start ; curoff < stop;
! 870: curoff += PAGE_SIZE) {
! 871: pp = uvm_pagelookup(uobj, curoff);
! 872: if (pp)
! 873: atomic_clearbits_int(&pp->pg_flags,
! 874: PG_CLEANCHK);
! 875: }
! 876: }
! 877: }
! 878:
! 879: /*
! 880: * now do it. note: we must update ppnext in body of loop or we
! 881: * will get stuck. we need to use ppnext because we may free "pp"
! 882: * before doing the next loop.
! 883: */
! 884:
! 885: if (by_list) {
! 886: pp = TAILQ_FIRST(&uobj->memq);
! 887: } else {
! 888: curoff = start;
! 889: pp = uvm_pagelookup(uobj, curoff);
! 890: }
! 891:
! 892: ppnext = NULL; /* XXX: shut up gcc */
! 893: ppsp = NULL; /* XXX: shut up gcc */
! 894: uvm_lock_pageq(); /* page queues locked */
! 895:
! 896: /* locked: both page queues and uobj */
! 897: for ( ; (by_list && pp != NULL) ||
! 898: (!by_list && curoff < stop) ; pp = ppnext) {
! 899:
! 900: if (by_list) {
! 901:
! 902: /*
! 903: * range check
! 904: */
! 905:
! 906: if (!all &&
! 907: (pp->offset < start || pp->offset >= stop)) {
! 908: ppnext = TAILQ_NEXT(pp, listq);
! 909: continue;
! 910: }
! 911:
! 912: } else {
! 913:
! 914: /*
! 915: * null check
! 916: */
! 917:
! 918: curoff += PAGE_SIZE;
! 919: if (pp == NULL) {
! 920: if (curoff < stop)
! 921: ppnext = uvm_pagelookup(uobj, curoff);
! 922: continue;
! 923: }
! 924:
! 925: }
! 926:
! 927: /*
! 928: * handle case where we do not need to clean page (either
! 929: * because we are not clean or because page is not dirty or
! 930: * is busy):
! 931: *
! 932: * NOTE: we are allowed to deactivate a non-wired active
! 933: * PG_BUSY page, but once a PG_BUSY page is on the inactive
! 934: * queue it must stay put until it is !PG_BUSY (so as not to
! 935: * confuse pagedaemon).
! 936: */
! 937:
! 938: if ((flags & PGO_CLEANIT) == 0 || (pp->pg_flags & PG_BUSY) != 0) {
! 939: needs_clean = FALSE;
! 940: if ((pp->pg_flags & PG_BUSY) != 0 &&
! 941: (flags & (PGO_CLEANIT|PGO_SYNCIO)) ==
! 942: (PGO_CLEANIT|PGO_SYNCIO))
! 943: need_iosync = TRUE;
! 944: } else {
! 945: /*
! 946: * freeing: nuke all mappings so we can sync
! 947: * PG_CLEAN bit with no race
! 948: */
! 949: if ((pp->pg_flags & PG_CLEAN) != 0 &&
! 950: (flags & PGO_FREE) != 0 &&
! 951: (pp->pg_flags & PQ_ACTIVE) != 0)
! 952: pmap_page_protect(pp, VM_PROT_NONE);
! 953: if ((pp->pg_flags & PG_CLEAN) != 0 &&
! 954: pmap_is_modified(pp))
! 955: atomic_clearbits_int(&pp->pg_flags, PG_CLEAN);
! 956: atomic_setbits_int(&pp->pg_flags, PG_CLEANCHK);
! 957:
! 958: needs_clean = ((pp->pg_flags & PG_CLEAN) == 0);
! 959: }
! 960:
! 961: /*
! 962: * if we don't need a clean... load ppnext and dispose of pp
! 963: */
! 964: if (!needs_clean) {
! 965: /* load ppnext */
! 966: if (by_list)
! 967: ppnext = TAILQ_NEXT(pp, listq);
! 968: else {
! 969: if (curoff < stop)
! 970: ppnext = uvm_pagelookup(uobj, curoff);
! 971: }
! 972:
! 973: /* now dispose of pp */
! 974: if (flags & PGO_DEACTIVATE) {
! 975: if ((pp->pg_flags & PQ_INACTIVE) == 0 &&
! 976: pp->wire_count == 0) {
! 977: pmap_page_protect(pp, VM_PROT_NONE);
! 978: uvm_pagedeactivate(pp);
! 979: }
! 980:
! 981: } else if (flags & PGO_FREE) {
! 982: if (pp->pg_flags & PG_BUSY) {
! 983: /* release busy pages */
! 984: atomic_setbits_int(&pp->pg_flags,
! 985: PG_RELEASED);
! 986: } else {
! 987: pmap_page_protect(pp, VM_PROT_NONE);
! 988: /* removed page from object */
! 989: uvm_pagefree(pp);
! 990: }
! 991: }
! 992: /* ppnext is valid so we can continue... */
! 993: continue;
! 994: }
! 995:
! 996: /*
! 997: * pp points to a page in the locked object that we are
! 998: * working on. if it is !PG_CLEAN,!PG_BUSY and we asked
! 999: * for cleaning (PGO_CLEANIT). we clean it now.
! 1000: *
! 1001: * let uvm_pager_put attempted a clustered page out.
! 1002: * note: locked: uobj and page queues.
! 1003: */
! 1004:
! 1005: atomic_setbits_int(&pp->pg_flags, PG_BUSY);
! 1006: UVM_PAGE_OWN(pp, "uvn_flush");
! 1007: pmap_page_protect(pp, VM_PROT_READ);
! 1008: pp_version = pp->pg_version;
! 1009: ReTry:
! 1010: ppsp = pps;
! 1011: npages = sizeof(pps) / sizeof(struct vm_page *);
! 1012:
! 1013: /* locked: page queues, uobj */
! 1014: result = uvm_pager_put(uobj, pp, &ppsp, &npages,
! 1015: flags | PGO_DOACTCLUST, start, stop);
! 1016: /* unlocked: page queues, uobj */
! 1017:
! 1018: /*
! 1019: * at this point nothing is locked. if we did an async I/O
! 1020: * it is remotely possible for the async i/o to complete and
! 1021: * the page "pp" be freed or what not before we get a chance
! 1022: * to relock the object. in order to detect this, we have
! 1023: * saved the version number of the page in "pp_version".
! 1024: */
! 1025:
! 1026: /* relock! */
! 1027: simple_lock(&uobj->vmobjlock);
! 1028: uvm_lock_pageq();
! 1029:
! 1030: /*
! 1031: * VM_PAGER_AGAIN: given the structure of this pager, this
! 1032: * can only happen when we are doing async I/O and can't
! 1033: * map the pages into kernel memory (pager_map) due to lack
! 1034: * of vm space. if this happens we drop back to sync I/O.
! 1035: */
! 1036:
! 1037: if (result == VM_PAGER_AGAIN) {
! 1038: /*
! 1039: * it is unlikely, but page could have been released
! 1040: * while we had the object lock dropped. we ignore
! 1041: * this now and retry the I/O. we will detect and
! 1042: * handle the released page after the syncio I/O
! 1043: * completes.
! 1044: */
! 1045: #ifdef DIAGNOSTIC
! 1046: if (flags & PGO_SYNCIO)
! 1047: panic("uvn_flush: PGO_SYNCIO return 'try again' error (impossible)");
! 1048: #endif
! 1049: flags |= PGO_SYNCIO;
! 1050: goto ReTry;
! 1051: }
! 1052:
! 1053: /*
! 1054: * the cleaning operation is now done. finish up. note that
! 1055: * on error (!OK, !PEND) uvm_pager_put drops the cluster for us.
! 1056: * if success (OK, PEND) then uvm_pager_put returns the cluster
! 1057: * to us in ppsp/npages.
! 1058: */
! 1059:
! 1060: /*
! 1061: * for pending async i/o if we are not deactivating/freeing
! 1062: * we can move on to the next page.
! 1063: */
! 1064:
! 1065: if (result == VM_PAGER_PEND) {
! 1066:
! 1067: if ((flags & (PGO_DEACTIVATE|PGO_FREE)) == 0) {
! 1068: /*
! 1069: * no per-page ops: refresh ppnext and continue
! 1070: */
! 1071: if (by_list) {
! 1072: if (pp->pg_version == pp_version)
! 1073: ppnext = TAILQ_NEXT(pp, listq);
! 1074: else
! 1075: /* reset */
! 1076: ppnext = TAILQ_FIRST(&uobj->memq);
! 1077: } else {
! 1078: if (curoff < stop)
! 1079: ppnext = uvm_pagelookup(uobj,
! 1080: curoff);
! 1081: }
! 1082: continue;
! 1083: }
! 1084:
! 1085: /* need to do anything here? */
! 1086: }
! 1087:
! 1088: /*
! 1089: * need to look at each page of the I/O operation. we defer
! 1090: * processing "pp" until the last trip through this "for" loop
! 1091: * so that we can load "ppnext" for the main loop after we
! 1092: * play with the cluster pages [thus the "npages + 1" in the
! 1093: * loop below].
! 1094: */
! 1095:
! 1096: for (lcv = 0 ; lcv < npages + 1 ; lcv++) {
! 1097:
! 1098: /*
! 1099: * handle ppnext for outside loop, and saving pp
! 1100: * until the end.
! 1101: */
! 1102: if (lcv < npages) {
! 1103: if (ppsp[lcv] == pp)
! 1104: continue; /* skip pp until the end */
! 1105: ptmp = ppsp[lcv];
! 1106: } else {
! 1107: ptmp = pp;
! 1108:
! 1109: /* set up next page for outer loop */
! 1110: if (by_list) {
! 1111: if (pp->pg_version == pp_version)
! 1112: ppnext = TAILQ_NEXT(pp, listq);
! 1113: else
! 1114: /* reset */
! 1115: ppnext = TAILQ_FIRST(&uobj->memq);
! 1116: } else {
! 1117: if (curoff < stop)
! 1118: ppnext = uvm_pagelookup(uobj, curoff);
! 1119: }
! 1120: }
! 1121:
! 1122: /*
! 1123: * verify the page didn't get moved while obj was
! 1124: * unlocked
! 1125: */
! 1126: if (result == VM_PAGER_PEND && ptmp->uobject != uobj)
! 1127: continue;
! 1128:
! 1129: /*
! 1130: * unbusy the page if I/O is done. note that for
! 1131: * pending I/O it is possible that the I/O op
! 1132: * finished before we relocked the object (in
! 1133: * which case the page is no longer busy).
! 1134: */
! 1135:
! 1136: if (result != VM_PAGER_PEND) {
! 1137: if (ptmp->pg_flags & PG_WANTED)
! 1138: /* still holding object lock */
! 1139: wakeup(ptmp);
! 1140:
! 1141: atomic_clearbits_int(&ptmp->pg_flags,
! 1142: PG_WANTED|PG_BUSY);
! 1143: UVM_PAGE_OWN(ptmp, NULL);
! 1144: if (ptmp->pg_flags & PG_RELEASED) {
! 1145:
! 1146: /* pgo_releasepg wants this */
! 1147: uvm_unlock_pageq();
! 1148: if (!uvn_releasepg(ptmp, NULL))
! 1149: return (TRUE);
! 1150:
! 1151: uvm_lock_pageq(); /* relock */
! 1152: continue; /* next page */
! 1153:
! 1154: } else {
! 1155: atomic_setbits_int(&ptmp->pg_flags,
! 1156: PG_CLEAN|PG_CLEANCHK);
! 1157: if ((flags & PGO_FREE) == 0)
! 1158: pmap_clear_modify(ptmp);
! 1159: }
! 1160: }
! 1161:
! 1162: /*
! 1163: * dispose of page
! 1164: */
! 1165:
! 1166: if (flags & PGO_DEACTIVATE) {
! 1167: if ((pp->pg_flags & PQ_INACTIVE) == 0 &&
! 1168: pp->wire_count == 0) {
! 1169: pmap_page_protect(ptmp, VM_PROT_NONE);
! 1170: uvm_pagedeactivate(ptmp);
! 1171: }
! 1172:
! 1173: } else if (flags & PGO_FREE) {
! 1174: if (result == VM_PAGER_PEND) {
! 1175: if ((ptmp->pg_flags & PG_BUSY) != 0)
! 1176: /* signal for i/o done */
! 1177: atomic_setbits_int(
! 1178: &ptmp->pg_flags,
! 1179: PG_RELEASED);
! 1180: } else {
! 1181: if (result != VM_PAGER_OK) {
! 1182: printf("uvn_flush: obj=%p, "
! 1183: "offset=0x%llx. error "
! 1184: "during pageout.\n",
! 1185: pp->uobject,
! 1186: (long long)pp->offset);
! 1187: printf("uvn_flush: WARNING: "
! 1188: "changes to page may be "
! 1189: "lost!\n");
! 1190: retval = FALSE;
! 1191: }
! 1192: pmap_page_protect(ptmp, VM_PROT_NONE);
! 1193: uvm_pagefree(ptmp);
! 1194: }
! 1195: }
! 1196:
! 1197: } /* end of "lcv" for loop */
! 1198:
! 1199: } /* end of "pp" for loop */
! 1200:
! 1201: /*
! 1202: * done with pagequeues: unlock
! 1203: */
! 1204: uvm_unlock_pageq();
! 1205:
! 1206: /*
! 1207: * now wait for all I/O if required.
! 1208: */
! 1209: if (need_iosync) {
! 1210:
! 1211: UVMHIST_LOG(maphist," <<DOING IOSYNC>>",0,0,0,0);
! 1212: while (uvn->u_nio != 0) {
! 1213: uvn->u_flags |= UVM_VNODE_IOSYNC;
! 1214: UVM_UNLOCK_AND_WAIT(&uvn->u_nio, &uvn->u_obj.vmobjlock,
! 1215: FALSE, "uvn_flush",0);
! 1216: simple_lock(&uvn->u_obj.vmobjlock);
! 1217: }
! 1218: if (uvn->u_flags & UVM_VNODE_IOSYNCWANTED)
! 1219: wakeup(&uvn->u_flags);
! 1220: uvn->u_flags &= ~(UVM_VNODE_IOSYNC|UVM_VNODE_IOSYNCWANTED);
! 1221: }
! 1222:
! 1223: /* return, with object locked! */
! 1224: UVMHIST_LOG(maphist,"<- done (retval=0x%lx)",retval,0,0,0);
! 1225: return(retval);
! 1226: }
! 1227:
! 1228: /*
! 1229: * uvn_cluster
! 1230: *
! 1231: * we are about to do I/O in an object at offset. this function is called
! 1232: * to establish a range of offsets around "offset" in which we can cluster
! 1233: * I/O.
! 1234: *
! 1235: * - currently doesn't matter if obj locked or not.
! 1236: */
! 1237:
! 1238: void
! 1239: uvn_cluster(uobj, offset, loffset, hoffset)
! 1240: struct uvm_object *uobj;
! 1241: voff_t offset;
! 1242: voff_t *loffset, *hoffset; /* OUT */
! 1243: {
! 1244: struct uvm_vnode *uvn = (struct uvm_vnode *) uobj;
! 1245: *loffset = offset;
! 1246:
! 1247: if (*loffset >= uvn->u_size)
! 1248: panic("uvn_cluster: offset out of range");
! 1249:
! 1250: /*
! 1251: * XXX: old pager claims we could use VOP_BMAP to get maxcontig value.
! 1252: */
! 1253: *hoffset = *loffset + MAXBSIZE;
! 1254: if (*hoffset > round_page(uvn->u_size)) /* past end? */
! 1255: *hoffset = round_page(uvn->u_size);
! 1256:
! 1257: return;
! 1258: }
! 1259:
! 1260: /*
! 1261: * uvn_put: flush page data to backing store.
! 1262: *
! 1263: * => prefer map unlocked (not required)
! 1264: * => object must be locked! we will _unlock_ it before starting I/O.
! 1265: * => flags: PGO_SYNCIO -- use sync. I/O
! 1266: * => note: caller must set PG_CLEAN and pmap_clear_modify (if needed)
! 1267: * => XXX: currently we use VOP_READ/VOP_WRITE which are only sync.
! 1268: * [thus we never do async i/o! see iodone comment]
! 1269: */
! 1270:
! 1271: int
! 1272: uvn_put(uobj, pps, npages, flags)
! 1273: struct uvm_object *uobj;
! 1274: struct vm_page **pps;
! 1275: int npages, flags;
! 1276: {
! 1277: int retval;
! 1278:
! 1279: /* note: object locked */
! 1280: retval = uvn_io((struct uvm_vnode*)uobj, pps, npages, flags, UIO_WRITE);
! 1281: /* note: object unlocked */
! 1282:
! 1283: return(retval);
! 1284: }
! 1285:
! 1286:
! 1287: /*
! 1288: * uvn_get: get pages (synchronously) from backing store
! 1289: *
! 1290: * => prefer map unlocked (not required)
! 1291: * => object must be locked! we will _unlock_ it before starting any I/O.
! 1292: * => flags: PGO_ALLPAGES: get all of the pages
! 1293: * PGO_LOCKED: fault data structures are locked
! 1294: * => NOTE: offset is the offset of pps[0], _NOT_ pps[centeridx]
! 1295: * => NOTE: caller must check for released pages!!
! 1296: */
! 1297:
! 1298: int
! 1299: uvn_get(uobj, offset, pps, npagesp, centeridx, access_type, advice, flags)
! 1300: struct uvm_object *uobj;
! 1301: voff_t offset;
! 1302: struct vm_page **pps; /* IN/OUT */
! 1303: int *npagesp; /* IN (OUT if PGO_LOCKED) */
! 1304: int centeridx, advice, flags;
! 1305: vm_prot_t access_type;
! 1306: {
! 1307: voff_t current_offset;
! 1308: struct vm_page *ptmp;
! 1309: int lcv, result, gotpages;
! 1310: boolean_t done;
! 1311: UVMHIST_FUNC("uvn_get"); UVMHIST_CALLED(maphist);
! 1312: UVMHIST_LOG(maphist, "flags=%ld", flags,0,0,0);
! 1313:
! 1314: /*
! 1315: * step 1: handled the case where fault data structures are locked.
! 1316: */
! 1317:
! 1318: if (flags & PGO_LOCKED) {
! 1319:
! 1320: /*
! 1321: * gotpages is the current number of pages we've gotten (which
! 1322: * we pass back up to caller via *npagesp.
! 1323: */
! 1324:
! 1325: gotpages = 0;
! 1326:
! 1327: /*
! 1328: * step 1a: get pages that are already resident. only do this
! 1329: * if the data structures are locked (i.e. the first time
! 1330: * through).
! 1331: */
! 1332:
! 1333: done = TRUE; /* be optimistic */
! 1334:
! 1335: for (lcv = 0, current_offset = offset ; lcv < *npagesp ;
! 1336: lcv++, current_offset += PAGE_SIZE) {
! 1337:
! 1338: /* do we care about this page? if not, skip it */
! 1339: if (pps[lcv] == PGO_DONTCARE)
! 1340: continue;
! 1341:
! 1342: /* lookup page */
! 1343: ptmp = uvm_pagelookup(uobj, current_offset);
! 1344:
! 1345: /* to be useful must get a non-busy, non-released pg */
! 1346: if (ptmp == NULL ||
! 1347: (ptmp->pg_flags & (PG_BUSY|PG_RELEASED)) != 0) {
! 1348: if (lcv == centeridx || (flags & PGO_ALLPAGES)
! 1349: != 0)
! 1350: done = FALSE; /* need to do a wait or I/O! */
! 1351: continue;
! 1352: }
! 1353:
! 1354: /*
! 1355: * useful page: busy/lock it and plug it in our
! 1356: * result array
! 1357: */
! 1358: atomic_setbits_int(&ptmp->pg_flags, PG_BUSY);
! 1359: UVM_PAGE_OWN(ptmp, "uvn_get1");
! 1360: pps[lcv] = ptmp;
! 1361: gotpages++;
! 1362:
! 1363: } /* "for" lcv loop */
! 1364:
! 1365: /*
! 1366: * XXX: given the "advice", should we consider async read-ahead?
! 1367: * XXX: fault current does deactive of pages behind us. is
! 1368: * this good (other callers might now).
! 1369: */
! 1370: /*
! 1371: * XXX: read-ahead currently handled by buffer cache (bread)
! 1372: * level.
! 1373: * XXX: no async i/o available.
! 1374: * XXX: so we don't do anything now.
! 1375: */
! 1376:
! 1377: /*
! 1378: * step 1c: now we've either done everything needed or we to
! 1379: * unlock and do some waiting or I/O.
! 1380: */
! 1381:
! 1382: *npagesp = gotpages; /* let caller know */
! 1383: if (done)
! 1384: return(VM_PAGER_OK); /* bingo! */
! 1385: else
! 1386: /* EEK! Need to unlock and I/O */
! 1387: return(VM_PAGER_UNLOCK);
! 1388: }
! 1389:
! 1390: /*
! 1391: * step 2: get non-resident or busy pages.
! 1392: * object is locked. data structures are unlocked.
! 1393: *
! 1394: * XXX: because we can't do async I/O at this level we get things
! 1395: * page at a time (otherwise we'd chunk). the VOP_READ() will do
! 1396: * async-read-ahead for us at a lower level.
! 1397: */
! 1398:
! 1399: for (lcv = 0, current_offset = offset;
! 1400: lcv < *npagesp ; lcv++, current_offset += PAGE_SIZE) {
! 1401:
! 1402: /* skip over pages we've already gotten or don't want */
! 1403: /* skip over pages we don't _have_ to get */
! 1404: if (pps[lcv] != NULL || (lcv != centeridx &&
! 1405: (flags & PGO_ALLPAGES) == 0))
! 1406: continue;
! 1407:
! 1408: /*
! 1409: * we have yet to locate the current page (pps[lcv]). we first
! 1410: * look for a page that is already at the current offset. if
! 1411: * we fine a page, we check to see if it is busy or released.
! 1412: * if that is the case, then we sleep on the page until it is
! 1413: * no longer busy or released and repeat the lookup. if the
! 1414: * page we found is neither busy nor released, then we busy it
! 1415: * (so we own it) and plug it into pps[lcv]. this breaks the
! 1416: * following while loop and indicates we are ready to move on
! 1417: * to the next page in the "lcv" loop above.
! 1418: *
! 1419: * if we exit the while loop with pps[lcv] still set to NULL,
! 1420: * then it means that we allocated a new busy/fake/clean page
! 1421: * ptmp in the object and we need to do I/O to fill in the data.
! 1422: */
! 1423:
! 1424: while (pps[lcv] == NULL) { /* top of "pps" while loop */
! 1425:
! 1426: /* look for a current page */
! 1427: ptmp = uvm_pagelookup(uobj, current_offset);
! 1428:
! 1429: /* nope? allocate one now (if we can) */
! 1430: if (ptmp == NULL) {
! 1431:
! 1432: ptmp = uvm_pagealloc(uobj, current_offset,
! 1433: NULL, 0);
! 1434:
! 1435: /* out of RAM? */
! 1436: if (ptmp == NULL) {
! 1437: simple_unlock(&uobj->vmobjlock);
! 1438: uvm_wait("uvn_getpage");
! 1439: simple_lock(&uobj->vmobjlock);
! 1440:
! 1441: /* goto top of pps while loop */
! 1442: continue;
! 1443: }
! 1444:
! 1445: /*
! 1446: * got new page ready for I/O. break pps
! 1447: * while loop. pps[lcv] is still NULL.
! 1448: */
! 1449: break;
! 1450: }
! 1451:
! 1452: /* page is there, see if we need to wait on it */
! 1453: if ((ptmp->pg_flags & (PG_BUSY|PG_RELEASED)) != 0) {
! 1454: atomic_setbits_int(&ptmp->pg_flags, PG_WANTED);
! 1455: UVM_UNLOCK_AND_WAIT(ptmp,
! 1456: &uobj->vmobjlock, FALSE, "uvn_get",0);
! 1457: simple_lock(&uobj->vmobjlock);
! 1458: continue; /* goto top of pps while loop */
! 1459: }
! 1460:
! 1461: /*
! 1462: * if we get here then the page has become resident
! 1463: * and unbusy between steps 1 and 2. we busy it
! 1464: * now (so we own it) and set pps[lcv] (so that we
! 1465: * exit the while loop).
! 1466: */
! 1467: atomic_setbits_int(&ptmp->pg_flags, PG_BUSY);
! 1468: UVM_PAGE_OWN(ptmp, "uvn_get2");
! 1469: pps[lcv] = ptmp;
! 1470: }
! 1471:
! 1472: /*
! 1473: * if we own the a valid page at the correct offset, pps[lcv]
! 1474: * will point to it. nothing more to do except go to the
! 1475: * next page.
! 1476: */
! 1477:
! 1478: if (pps[lcv])
! 1479: continue; /* next lcv */
! 1480:
! 1481: /*
! 1482: * we have a "fake/busy/clean" page that we just allocated. do
! 1483: * I/O to fill it with valid data. note that object must be
! 1484: * locked going into uvn_io, but will be unlocked afterwards.
! 1485: */
! 1486:
! 1487: result = uvn_io((struct uvm_vnode *) uobj, &ptmp, 1,
! 1488: PGO_SYNCIO, UIO_READ);
! 1489:
! 1490: /*
! 1491: * I/O done. object is unlocked (by uvn_io). because we used
! 1492: * syncio the result can not be PEND or AGAIN. we must relock
! 1493: * and check for errors.
! 1494: */
! 1495:
! 1496: /* lock object. check for errors. */
! 1497: simple_lock(&uobj->vmobjlock);
! 1498: if (result != VM_PAGER_OK) {
! 1499: if (ptmp->pg_flags & PG_WANTED)
! 1500: /* object lock still held */
! 1501: wakeup(ptmp);
! 1502:
! 1503: atomic_clearbits_int(&ptmp->pg_flags,
! 1504: PG_WANTED|PG_BUSY);
! 1505: UVM_PAGE_OWN(ptmp, NULL);
! 1506: uvm_lock_pageq();
! 1507: uvm_pagefree(ptmp);
! 1508: uvm_unlock_pageq();
! 1509: simple_unlock(&uobj->vmobjlock);
! 1510: return(result);
! 1511: }
! 1512:
! 1513: /*
! 1514: * we got the page! clear the fake flag (indicates valid
! 1515: * data now in page) and plug into our result array. note
! 1516: * that page is still busy.
! 1517: *
! 1518: * it is the callers job to:
! 1519: * => check if the page is released
! 1520: * => unbusy the page
! 1521: * => activate the page
! 1522: */
! 1523:
! 1524: /* data is valid ... */
! 1525: atomic_clearbits_int(&ptmp->pg_flags, PG_FAKE);
! 1526: pmap_clear_modify(ptmp); /* ... and clean */
! 1527: pps[lcv] = ptmp;
! 1528:
! 1529: } /* lcv loop */
! 1530:
! 1531: /*
! 1532: * finally, unlock object and return.
! 1533: */
! 1534:
! 1535: simple_unlock(&uobj->vmobjlock);
! 1536: return (VM_PAGER_OK);
! 1537: }
! 1538:
! 1539: /*
! 1540: * uvn_io: do I/O to a vnode
! 1541: *
! 1542: * => prefer map unlocked (not required)
! 1543: * => object must be locked! we will _unlock_ it before starting I/O.
! 1544: * => flags: PGO_SYNCIO -- use sync. I/O
! 1545: * => XXX: currently we use VOP_READ/VOP_WRITE which are only sync.
! 1546: * [thus we never do async i/o! see iodone comment]
! 1547: */
! 1548:
! 1549: int
! 1550: uvn_io(uvn, pps, npages, flags, rw)
! 1551: struct uvm_vnode *uvn;
! 1552: vm_page_t *pps;
! 1553: int npages, flags, rw;
! 1554: {
! 1555: struct vnode *vn;
! 1556: struct uio uio;
! 1557: struct iovec iov;
! 1558: vaddr_t kva;
! 1559: off_t file_offset;
! 1560: int waitf, result, mapinflags;
! 1561: size_t got, wanted;
! 1562: UVMHIST_FUNC("uvn_io"); UVMHIST_CALLED(maphist);
! 1563:
! 1564: UVMHIST_LOG(maphist, "rw=%ld", rw,0,0,0);
! 1565:
! 1566: /*
! 1567: * init values
! 1568: */
! 1569:
! 1570: waitf = (flags & PGO_SYNCIO) ? M_WAITOK : M_NOWAIT;
! 1571: vn = (struct vnode *) uvn;
! 1572: file_offset = pps[0]->offset;
! 1573:
! 1574: /*
! 1575: * check for sync'ing I/O.
! 1576: */
! 1577:
! 1578: while (uvn->u_flags & UVM_VNODE_IOSYNC) {
! 1579: if (waitf == M_NOWAIT) {
! 1580: simple_unlock(&uvn->u_obj.vmobjlock);
! 1581: UVMHIST_LOG(maphist,"<- try again (iosync)",0,0,0,0);
! 1582: return(VM_PAGER_AGAIN);
! 1583: }
! 1584: uvn->u_flags |= UVM_VNODE_IOSYNCWANTED;
! 1585: UVM_UNLOCK_AND_WAIT(&uvn->u_flags, &uvn->u_obj.vmobjlock,
! 1586: FALSE, "uvn_iosync",0);
! 1587: simple_lock(&uvn->u_obj.vmobjlock);
! 1588: }
! 1589:
! 1590: /*
! 1591: * check size
! 1592: */
! 1593:
! 1594: if (file_offset >= uvn->u_size) {
! 1595: simple_unlock(&uvn->u_obj.vmobjlock);
! 1596: UVMHIST_LOG(maphist,"<- BAD (size check)",0,0,0,0);
! 1597: return(VM_PAGER_BAD);
! 1598: }
! 1599:
! 1600: /*
! 1601: * first try and map the pages in (without waiting)
! 1602: */
! 1603:
! 1604: mapinflags = (rw == UIO_READ) ?
! 1605: UVMPAGER_MAPIN_READ : UVMPAGER_MAPIN_WRITE;
! 1606:
! 1607: kva = uvm_pagermapin(pps, npages, mapinflags);
! 1608: if (kva == 0 && waitf == M_NOWAIT) {
! 1609: simple_unlock(&uvn->u_obj.vmobjlock);
! 1610: UVMHIST_LOG(maphist,"<- mapin failed (try again)",0,0,0,0);
! 1611: return(VM_PAGER_AGAIN);
! 1612: }
! 1613:
! 1614: /*
! 1615: * ok, now bump u_nio up. at this point we are done with uvn
! 1616: * and can unlock it. if we still don't have a kva, try again
! 1617: * (this time with sleep ok).
! 1618: */
! 1619:
! 1620: uvn->u_nio++; /* we have an I/O in progress! */
! 1621: simple_unlock(&uvn->u_obj.vmobjlock);
! 1622: /* NOTE: object now unlocked */
! 1623: if (kva == 0)
! 1624: kva = uvm_pagermapin(pps, npages,
! 1625: mapinflags | UVMPAGER_MAPIN_WAITOK);
! 1626:
! 1627: /*
! 1628: * ok, mapped in. our pages are PG_BUSY so they are not going to
! 1629: * get touched (so we can look at "offset" without having to lock
! 1630: * the object). set up for I/O.
! 1631: */
! 1632:
! 1633: /*
! 1634: * fill out uio/iov
! 1635: */
! 1636:
! 1637: iov.iov_base = (caddr_t) kva;
! 1638: wanted = npages << PAGE_SHIFT;
! 1639: if (file_offset + wanted > uvn->u_size)
! 1640: wanted = uvn->u_size - file_offset; /* XXX: needed? */
! 1641: iov.iov_len = wanted;
! 1642: uio.uio_iov = &iov;
! 1643: uio.uio_iovcnt = 1;
! 1644: uio.uio_offset = file_offset;
! 1645: uio.uio_segflg = UIO_SYSSPACE;
! 1646: uio.uio_rw = rw;
! 1647: uio.uio_resid = wanted;
! 1648: uio.uio_procp = curproc;
! 1649:
! 1650: /*
! 1651: * do the I/O! (XXX: curproc?)
! 1652: */
! 1653:
! 1654: UVMHIST_LOG(maphist, "calling VOP",0,0,0,0);
! 1655:
! 1656: /*
! 1657: * This process may already have this vnode locked, if we faulted in
! 1658: * copyin() or copyout() on a region backed by this vnode
! 1659: * while doing I/O to the vnode. If this is the case, don't
! 1660: * panic.. instead, return the error to the user.
! 1661: *
! 1662: * XXX this is a stopgap to prevent a panic.
! 1663: * Ideally, this kind of operation *should* work.
! 1664: */
! 1665: result = 0;
! 1666: if ((uvn->u_flags & UVM_VNODE_VNISLOCKED) == 0)
! 1667: result = vn_lock(vn, LK_EXCLUSIVE | LK_RECURSEFAIL, curproc);
! 1668:
! 1669: if (result == 0) {
! 1670: /* NOTE: vnode now locked! */
! 1671:
! 1672: if (rw == UIO_READ)
! 1673: result = VOP_READ(vn, &uio, 0, curproc->p_ucred);
! 1674: else
! 1675: result = VOP_WRITE(vn, &uio, 0, curproc->p_ucred);
! 1676:
! 1677: if ((uvn->u_flags & UVM_VNODE_VNISLOCKED) == 0)
! 1678: VOP_UNLOCK(vn, 0, curproc);
! 1679: }
! 1680:
! 1681: /* NOTE: vnode now unlocked (unless vnislocked) */
! 1682:
! 1683: UVMHIST_LOG(maphist, "done calling VOP",0,0,0,0);
! 1684:
! 1685: /*
! 1686: * result == unix style errno (0 == OK!)
! 1687: *
! 1688: * zero out rest of buffer (if needed)
! 1689: */
! 1690:
! 1691: if (result == 0) {
! 1692: got = wanted - uio.uio_resid;
! 1693:
! 1694: if (wanted && got == 0) {
! 1695: result = EIO; /* XXX: error? */
! 1696: } else if (got < PAGE_SIZE * npages && rw == UIO_READ) {
! 1697: memset((void *) (kva + got), 0,
! 1698: (npages << PAGE_SHIFT) - got);
! 1699: }
! 1700: }
! 1701:
! 1702: /*
! 1703: * now remove pager mapping
! 1704: */
! 1705: uvm_pagermapout(kva, npages);
! 1706:
! 1707: /*
! 1708: * now clean up the object (i.e. drop I/O count)
! 1709: */
! 1710:
! 1711: simple_lock(&uvn->u_obj.vmobjlock);
! 1712: /* NOTE: object now locked! */
! 1713:
! 1714: uvn->u_nio--; /* I/O DONE! */
! 1715: if ((uvn->u_flags & UVM_VNODE_IOSYNC) != 0 && uvn->u_nio == 0) {
! 1716: wakeup(&uvn->u_nio);
! 1717: }
! 1718: simple_unlock(&uvn->u_obj.vmobjlock);
! 1719: /* NOTE: object now unlocked! */
! 1720:
! 1721: /*
! 1722: * done!
! 1723: */
! 1724:
! 1725: UVMHIST_LOG(maphist, "<- done (result %ld)", result,0,0,0);
! 1726: if (result == 0)
! 1727: return(VM_PAGER_OK);
! 1728: else
! 1729: return(VM_PAGER_ERROR);
! 1730: }
! 1731:
! 1732: /*
! 1733: * uvm_vnp_uncache: disable "persisting" in a vnode... when last reference
! 1734: * is gone we will kill the object (flushing dirty pages back to the vnode
! 1735: * if needed).
! 1736: *
! 1737: * => returns TRUE if there was no uvm_object attached or if there was
! 1738: * one and we killed it [i.e. if there is no active uvn]
! 1739: * => called with the vnode VOP_LOCK'd [we will unlock it for I/O, if
! 1740: * needed]
! 1741: *
! 1742: * => XXX: given that we now kill uvn's when a vnode is recycled (without
! 1743: * having to hold a reference on the vnode) and given a working
! 1744: * uvm_vnp_sync(), how does that effect the need for this function?
! 1745: * [XXXCDC: seems like it can die?]
! 1746: *
! 1747: * => XXX: this function should DIE once we merge the VM and buffer
! 1748: * cache.
! 1749: *
! 1750: * research shows that this is called in the following places:
! 1751: * ext2fs_truncate, ffs_truncate, detrunc[msdosfs]: called when vnode
! 1752: * changes sizes
! 1753: * ext2fs_write, WRITE [ufs_readwrite], msdosfs_write: called when we
! 1754: * are written to
! 1755: * ex2fs_chmod, ufs_chmod: called if VTEXT vnode and the sticky bit
! 1756: * is off
! 1757: * ffs_realloccg: when we can't extend the current block and have
! 1758: * to allocate a new one we call this [XXX: why?]
! 1759: * nfsrv_rename, rename_files: called when the target filename is there
! 1760: * and we want to remove it
! 1761: * nfsrv_remove, sys_unlink: called on file we are removing
! 1762: * nfsrv_access: if VTEXT and we want WRITE access and we don't uncache
! 1763: * then return "text busy"
! 1764: * nfs_open: seems to uncache any file opened with nfs
! 1765: * vn_writechk: if VTEXT vnode and can't uncache return "text busy"
! 1766: */
! 1767:
! 1768: boolean_t
! 1769: uvm_vnp_uncache(vp)
! 1770: struct vnode *vp;
! 1771: {
! 1772: struct uvm_vnode *uvn = &vp->v_uvm;
! 1773:
! 1774: /*
! 1775: * lock uvn part of the vnode and check to see if we need to do anything
! 1776: */
! 1777:
! 1778: simple_lock(&uvn->u_obj.vmobjlock);
! 1779: if ((uvn->u_flags & UVM_VNODE_VALID) == 0 ||
! 1780: (uvn->u_flags & UVM_VNODE_BLOCKED) != 0) {
! 1781: simple_unlock(&uvn->u_obj.vmobjlock);
! 1782: return(TRUE);
! 1783: }
! 1784:
! 1785: /*
! 1786: * we have a valid, non-blocked uvn. clear persist flag.
! 1787: * if uvn is currently active we can return now.
! 1788: */
! 1789:
! 1790: uvn->u_flags &= ~UVM_VNODE_CANPERSIST;
! 1791: if (uvn->u_obj.uo_refs) {
! 1792: simple_unlock(&uvn->u_obj.vmobjlock);
! 1793: return(FALSE);
! 1794: }
! 1795:
! 1796: /*
! 1797: * uvn is currently persisting! we have to gain a reference to
! 1798: * it so that we can call uvn_detach to kill the uvn.
! 1799: */
! 1800:
! 1801: VREF(vp); /* seems ok, even with VOP_LOCK */
! 1802: uvn->u_obj.uo_refs++; /* value is now 1 */
! 1803: simple_unlock(&uvn->u_obj.vmobjlock);
! 1804:
! 1805:
! 1806: #ifdef DEBUG
! 1807: /*
! 1808: * carry over sanity check from old vnode pager: the vnode should
! 1809: * be VOP_LOCK'd, and we confirm it here.
! 1810: */
! 1811: if (!VOP_ISLOCKED(vp)) {
! 1812: boolean_t is_ok_anyway = FALSE;
! 1813: #if defined(NFSCLIENT)
! 1814: extern int (**nfsv2_vnodeop_p)(void *);
! 1815: extern int (**spec_nfsv2nodeop_p)(void *);
! 1816: #if defined(FIFO)
! 1817: extern int (**fifo_nfsv2nodeop_p)(void *);
! 1818: #endif /* defined(FIFO) */
! 1819:
! 1820: /* vnode is NOT VOP_LOCKed: some vnode types _never_ lock */
! 1821: if (vp->v_op == nfsv2_vnodeop_p ||
! 1822: vp->v_op == spec_nfsv2nodeop_p) {
! 1823: is_ok_anyway = TRUE;
! 1824: }
! 1825: #if defined(FIFO)
! 1826: if (vp->v_op == fifo_nfsv2nodeop_p) {
! 1827: is_ok_anyway = TRUE;
! 1828: }
! 1829: #endif /* defined(FIFO) */
! 1830: #endif /* defined(NFSSERVER) || defined(NFSCLIENT) */
! 1831: if (!is_ok_anyway)
! 1832: panic("uvm_vnp_uncache: vnode not locked!");
! 1833: }
! 1834: #endif /* DEBUG */
! 1835:
! 1836: /*
! 1837: * now drop our reference to the vnode. if we have the sole
! 1838: * reference to the vnode then this will cause it to die [as we
! 1839: * just cleared the persist flag]. we have to unlock the vnode
! 1840: * while we are doing this as it may trigger I/O.
! 1841: *
! 1842: * XXX: it might be possible for uvn to get reclaimed while we are
! 1843: * unlocked causing us to return TRUE when we should not. we ignore
! 1844: * this as a false-positive return value doesn't hurt us.
! 1845: */
! 1846: VOP_UNLOCK(vp, 0, curproc);
! 1847: uvn_detach(&uvn->u_obj);
! 1848: vn_lock(vp, LK_EXCLUSIVE | LK_RETRY, curproc);
! 1849:
! 1850: /*
! 1851: * and return...
! 1852: */
! 1853:
! 1854: return(TRUE);
! 1855: }
! 1856:
! 1857: /*
! 1858: * uvm_vnp_setsize: grow or shrink a vnode uvn
! 1859: *
! 1860: * grow => just update size value
! 1861: * shrink => toss un-needed pages
! 1862: *
! 1863: * => we assume that the caller has a reference of some sort to the
! 1864: * vnode in question so that it will not be yanked out from under
! 1865: * us.
! 1866: *
! 1867: * called from:
! 1868: * => truncate fns (ext2fs_truncate, ffs_truncate, detrunc[msdos])
! 1869: * => "write" fns (ext2fs_write, WRITE [ufs/ufs], msdosfs_write, nfs_write)
! 1870: * => ffs_balloc [XXX: why? doesn't WRITE handle?]
! 1871: * => NFS: nfs_loadattrcache, nfs_getattrcache, nfs_setattr
! 1872: * => union fs: union_newsize
! 1873: */
! 1874:
! 1875: void
! 1876: uvm_vnp_setsize(vp, newsize)
! 1877: struct vnode *vp;
! 1878: voff_t newsize;
! 1879: {
! 1880: struct uvm_vnode *uvn = &vp->v_uvm;
! 1881:
! 1882: /*
! 1883: * lock uvn and check for valid object, and if valid: do it!
! 1884: */
! 1885: simple_lock(&uvn->u_obj.vmobjlock);
! 1886: if (uvn->u_flags & UVM_VNODE_VALID) {
! 1887:
! 1888: /*
! 1889: * now check if the size has changed: if we shrink we had better
! 1890: * toss some pages...
! 1891: */
! 1892:
! 1893: if (uvn->u_size > newsize) {
! 1894: (void)uvn_flush(&uvn->u_obj, newsize,
! 1895: uvn->u_size, PGO_FREE);
! 1896: }
! 1897: uvn->u_size = newsize;
! 1898: }
! 1899: simple_unlock(&uvn->u_obj.vmobjlock);
! 1900:
! 1901: /*
! 1902: * done
! 1903: */
! 1904: return;
! 1905: }
! 1906:
! 1907: /*
! 1908: * uvm_vnp_sync: flush all dirty VM pages back to their backing vnodes.
! 1909: *
! 1910: * => called from sys_sync with no VM structures locked
! 1911: * => only one process can do a sync at a time (because the uvn
! 1912: * structure only has one queue for sync'ing). we ensure this
! 1913: * by holding the uvn_sync_lock while the sync is in progress.
! 1914: * other processes attempting a sync will sleep on this lock
! 1915: * until we are done.
! 1916: */
! 1917:
! 1918: void
! 1919: uvm_vnp_sync(mp)
! 1920: struct mount *mp;
! 1921: {
! 1922: struct uvm_vnode *uvn;
! 1923: struct vnode *vp;
! 1924: boolean_t got_lock;
! 1925:
! 1926: /*
! 1927: * step 1: ensure we are only ones using the uvn_sync_q by locking
! 1928: * our lock...
! 1929: */
! 1930: rw_enter_write(&uvn_sync_lock);
! 1931:
! 1932: /*
! 1933: * step 2: build up a simpleq of uvns of interest based on the
! 1934: * write list. we gain a reference to uvns of interest.
! 1935: */
! 1936: SIMPLEQ_INIT(&uvn_sync_q);
! 1937: LIST_FOREACH(uvn, &uvn_wlist, u_wlist) {
! 1938:
! 1939: vp = (struct vnode *) uvn;
! 1940: if (mp && vp->v_mount != mp)
! 1941: continue;
! 1942:
! 1943: /* attempt to gain reference */
! 1944: while ((got_lock = simple_lock_try(&uvn->u_obj.vmobjlock)) ==
! 1945: FALSE &&
! 1946: (uvn->u_flags & UVM_VNODE_BLOCKED) == 0)
! 1947: /* spin */;
! 1948:
! 1949: /*
! 1950: * we will exit the loop if either if the following are true:
! 1951: * - we got the lock [always true if NCPU == 1]
! 1952: * - we failed to get the lock but noticed the vnode was
! 1953: * "blocked" -- in this case the vnode must be a dying
! 1954: * vnode, and since dying vnodes are in the process of
! 1955: * being flushed out, we can safely skip this one
! 1956: *
! 1957: * we want to skip over the vnode if we did not get the lock,
! 1958: * or if the vnode is already dying (due to the above logic).
! 1959: *
! 1960: * note that uvn must already be valid because we found it on
! 1961: * the wlist (this also means it can't be ALOCK'd).
! 1962: */
! 1963: if (!got_lock || (uvn->u_flags & UVM_VNODE_BLOCKED) != 0) {
! 1964: if (got_lock)
! 1965: simple_unlock(&uvn->u_obj.vmobjlock);
! 1966: continue; /* skip it */
! 1967: }
! 1968:
! 1969: /*
! 1970: * gain reference. watch out for persisting uvns (need to
! 1971: * regain vnode REF).
! 1972: */
! 1973: if (uvn->u_obj.uo_refs == 0)
! 1974: VREF(vp);
! 1975: uvn->u_obj.uo_refs++;
! 1976: simple_unlock(&uvn->u_obj.vmobjlock);
! 1977:
! 1978: /*
! 1979: * got it!
! 1980: */
! 1981: SIMPLEQ_INSERT_HEAD(&uvn_sync_q, uvn, u_syncq);
! 1982: }
! 1983:
! 1984: /*
! 1985: * step 3: we now have a list of uvn's that may need cleaning.
! 1986: * we are holding the uvn_sync_lock.
! 1987: */
! 1988:
! 1989: SIMPLEQ_FOREACH(uvn, &uvn_sync_q, u_syncq) {
! 1990: simple_lock(&uvn->u_obj.vmobjlock);
! 1991: #ifdef DEBUG
! 1992: if (uvn->u_flags & UVM_VNODE_DYING) {
! 1993: printf("uvm_vnp_sync: dying vnode on sync list\n");
! 1994: }
! 1995: #endif
! 1996: uvn_flush(&uvn->u_obj, 0, 0,
! 1997: PGO_CLEANIT|PGO_ALLPAGES|PGO_DOACTCLUST);
! 1998:
! 1999: /*
! 2000: * if we have the only reference and we just cleaned the uvn,
! 2001: * then we can pull it out of the UVM_VNODE_WRITEABLE state
! 2002: * thus allowing us to avoid thinking about flushing it again
! 2003: * on later sync ops.
! 2004: */
! 2005: if (uvn->u_obj.uo_refs == 1 &&
! 2006: (uvn->u_flags & UVM_VNODE_WRITEABLE)) {
! 2007: LIST_REMOVE(uvn, u_wlist);
! 2008: uvn->u_flags &= ~UVM_VNODE_WRITEABLE;
! 2009: }
! 2010:
! 2011: simple_unlock(&uvn->u_obj.vmobjlock);
! 2012:
! 2013: /* now drop our reference to the uvn */
! 2014: uvn_detach(&uvn->u_obj);
! 2015: }
! 2016:
! 2017: /*
! 2018: * done! release sync lock
! 2019: */
! 2020: rw_exit_write(&uvn_sync_lock);
! 2021: }
CVSweb